Downloaded and ran firmware update, NanoPlus won't power

Downloaded and ran firmware update ZENNanoPlus_PCFW_L6__4_03.exe. Device will now not power on (brand new battery). Tired to reinstall firmware and?receive "A device has been detected in recovery mode and is being initialzed". Immediate receive error "Unable to write firmware file data." I do get the Windows event sound indicating the device is connected immediately followed by the disconnected event sound. This happens every minute or so if I leave the player connected to the USB cable. I have tried the recovery tool and it says it recongnizes my player in recovery mode but then I get the same error "Unable to write firmware file data."? HELP!? The player will not power on and is useless at this point.

Similar Messages

Help trying to download and install firmware updater 1.0.2

When I click on Apple's link to download and install the latest firmware updater, this is the message that I get. Look at the link, and let me know where I can find the latest firmware updater for the headset to work. Thanks!

Okay. I uninstalled AIR, downloaded the current version and re-installed. I thought maybe a full install with the current version would help. CS4 setup seems to be working until it gets stuck at 'installing Adobe AIR.' I uninstalled AIR again and let CS4 setup install it but it still dies when it tries to do so. When it gets stuck, It will not let me CANCEL, instead I have to 'force quit' -- even thoght it doesn't show up as crashed. One great thhing -- I no longer have the big bang game popping up.
Thank you so much for you answer, One step @ at time...
Suzanne

Download and install the updates manually

I have just purchased Photoshop CS6 and ran the updater from within Photoshop. I know some of the updates worked but not all. So I ran it again 3 or 4 attempts now have failed with this message:-
It has failed to install -
Extension Manager 6.0.6 Update
with the error message -
Installation failed. Error Code: U44M1P7
I have found a solution on the forum-
Download and install the updates manually. Go to http://www.adobe.com/downloads/updates and download the update that you are trying to install.
There is no update available there which refers to Extension Manager 6.0.6 Update
I opened the Adobe Application Manager and run it for updates, it reports I'm good - no updates! But when I then try for an update from within Photoshop I still get the same message telling me I need to instal ExtensionManager 6.0.6 Update
I have tried to find the error log from within my system - but failed misserably (I am on Windows 7-64)
So please, where do I go from here? Do I need Extension Manager? What does it do? Is it vital I install this update?

Something really weird with the latest update for us poor perpetual license users.
Tried to install the upate and received a bunch of error codes U44MP17 on the first try, U44MP27 on the second (go figure why the error code changed) then tried the manual update - that failed as well arrgh!!!!
Now checking for updates, Help/Updates it tells me that the only update outstanding is ACR8.1 - weird I thought as about is reporting 13.0 - so checked the binaries and Photoshop.exe (64 bit) shows a date of 6/11/2013 so although I received errors it looks like the update maybe, sorta took.
The other binaries with the 6/11/13 date are
AdobeOwl.dll
AdobePDF.dll
AlignmentLib.dll
AGM.dll
Cooltype.dll
TFKGEOM.dll
All works OK but a tad confused as to why this may have happened - but given the robustness of AAM maybe I am not surprised.
Holding off with the ACR8.1 update until next week, I have a wedding shoot tomorrow - cannot afford to fall back or reinstall anything
So can anyone confirm that my update really took?
So Trevor, what is so special about Monday?
Mike
PS checked the 32 bit binaries and they have a different set of binary updates
TFKernal.dll
PSArt.dll
AGM.dll
image_compiler.dll
PSViews.dll
AlignmentLib.dll
CIT.dll
Photoshop.exe
Cooltype.dll

HT3421 I run Mac OSX 10.6.8 Snow: Downloaded this battery firmware update, it tells me I need OSX Tiger 10.4.11 , Leopard 10.5.6 or newer.... WTH?

I run Mac OSX Snow Leopard 10.6.8 -----> I downloaded this battery firmware update and upong launching the update
it tells me that I need OSX Tiger 10.4.11 , Leopard 10.5.6 or newer.
Then the updater quits automatically.
Can anyone plese help me? What the dickens is happening?

ACTUALLY according to Mac Suport site , yes I do need the firmware batery update.
http://support.apple.com/kb/HT3421
All these applies to my MacBook:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
And when runiing the isntaller it tells me that I need OSX Tiger 10.4.11 , Leopard 10.5.6 or newer.
I run Snow Leopard which is NEWER....
What to do?... (pacing....pacing..... tun on heels and paciong, pacing.....)

Hello, i really need help. I had just updated my iphone 3gs to 6.0.1, and after I updated, it won't activate.

Hello, i really need help. I had just updated my iphone 3gs to i.o.s. 6.0.1, and after I updated, it won't activate.I tried it in itunes and it always says " We cannot activate your iphone at this time..." and when I activate using Wi-Fi, it says, "Your iPhone cannot be activated because the activation server is temporarily unavailable." I could swear that my Wi-Fi is fine, and my Itunes is on the latest version. Is this a bad thing or does this normally occurs? Can I still fix this ? I'm so desperate to use my iphone cause I use it everyday for personal purposes. I sure would appreciate any tip or help . PLSSSS ! Thank you for that wonderful being that can help.

Do not take it to a third party repair shop - downgrading causes problems and voids your warranty.
I had to unlock it so that i could really use it as a phone.
And that is the root of the problem. Unless you had your carrier unlock it, it was hacked and cannot be legitimately activated. Even if you don't care about warranty or problems, downgrading simply will not help an activation issue.

I began downloading and installing an update to Creative Cloud and got an error message. Now I cannot access Creative Cloud at all. Please advise.

I just tried to download and install an update to Creative Cloud and got an error message that the operation was unable to be completed. Now I cannot access Creative Cloud at all. Please advise.

Run the cleaner tool and reinstall everything from scratch.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting. Please tell me how can i get it or how i would be able to download and install ios update without using computer

Hi
I am using iphone 3gs running on ios 5.1.1
I didn't find any software update option at any place in setting.
Please tell me how can i get it or how i would be able to download and install ios update without using computer

Just use the phone the way it is, forget the apps.

The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday.

My problem: The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday. I have a Mac Pro with Mavericks and Final Cut Pro X 10.1 installed. It seems to complete the update to the best of my knowledge. It shows it to be Final Cut Pro X Supplemental Content 1.0. Is there a later version (a 2.0?)? It seems it started when Mavericks updated. Anyone else have this issue or know a solution to get it to update once and for all?

hahah yeah i quit torrenting i have nothing but legit apps now.
hope apple heard that!!!!
your post fixed my issue
but it did take more than deleting torrented apps, once your run a program with a MASReciept with someone elses Apple ID. that other ID is saved in all apps you got off of app store.
You have to delete all apps that contain the MASReciept (the terminal command tells you which ones) then quit appstore then reboot download all apps again.
it taught me to just buy my apps..

HT4061 i have cellular data internet connectivity (no wi-fi) but can't download and install software updates

i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

"Wake from sleep" grayed out and BT firmware updater won't work

I've read a number of postings related to ways to correct the grayed out "wake from sleep" option in the Bluetooth prefs pannel, which is a problem I'm having since switching to a Apple Bluetooth keyboard and mouse. The problem I seem to be having is that the Firmware 1.2 updater for the DBT-120 Bluetooth adapter will run, but won't seem to actually flash my adapter (i.e., it won't actually update the device). It is H/W ver: B4, and is plugged directly into a USB port on the back of my fairly new G5 tower, so it seems like it should work.
Any ideas? Thanks!
Dual 2 GHz G5 Mac OS X (10.4.6)

That did the trick! My old G4 tower (Yikes!) was able to flash the BT adapter with the firmware update without a problem, even though my G5 was unable to ever finish the process. Once I plugged the updated adapter into the G5 the "Wake from Sleep" option was available and already selected.
Thanks so much for the tip-- I can finally put this question (and problem) to rest.
Dual 2 GHz G5 Mac OS X (10.4.4)

HP dmg firmware update files won't open in Lion

Another nasty suprise in lion...
Just bought a HP p1102w printer to replace an old HP 5p I've got an iPad 2 and iMac. Really wanted to be able to print wirelessly to the p1102w from the iPad 2. The printer installed fine on the iMac and works great.
When I went to establish a wifi connection, nothing was visible in airprint. Once again, HP (and apple) are touting that ipads will be able to wirelessly print and the setup is easy etc. Apple recommends the HP p1102w as a functioning printer...
Apple always seems to be left behind in the HP development process and once again it seems to be true. After an hour on the phone, the HP people told me the drivers need firmware update. So, I downloaded it ( LJP1100_P1560_P1600_FW_Update.dmg ) When I went to open the image and run the update, the driver update had the old "appleworks" logo on it. When clicking to update, nothing happened.
Called HP again and they said, "Probably just bad download." Redid it and same result. Upon further conversations I pressed them on why lion would run the update... When they looked into it, they basically said, "Looks like our updaters don't work with lion." Of course, they said it's apple's fault for releasing Lion. I mentioned they probably haven't spent any time checking anything till lion arrived (they admitted they don't do any updating till final product is out).
He did say that the firmware update ran fine in snowleopard, so I should just install it on a machine running 10.6.8 (ha! not rich enough to afford 3 or 4 computers a one time). They said they're working on it, but who knows when it will work.
so, I've got a new iPad 2, a new printer and a new OS on my iMac and can't get the firmware to update so printer will work for iPad 2.
I don't understand why the firmware update can't be somehow sent to the iPad 2... This whole system of doing things for my iPad 2 through iTunes or another computer is rather confoluted. Just wish the iPad 2 ran a unix base and didn't have to mess with a placenta like iTunes.
Sorry for the long rant... The question is:
How can I get my iPad 2 to print to the hp P1102w asap (I hate to wait for HP, apple always gets second class treatment for development with them...)
Also, beware of some updates on images may no run in lion. Looks like they used ppc or programing and doesn't work now. All sorts of nasty suprizes when you obliterate the ability to run some of the software for earlier OSs....
(Too bad apple doesn't keep rosetta or some translator for these older OSs... I've now got 1000's of Appleworks files and other ppc software files that can't be opened anymore).

OK, I did a bit more work, here is a workaround that I verified works on 10.7.
- Download the HP Firmware
ftp://ftp.hp.com/pub/softlib/software12/COL32545/bi-95186-1/LJP1100_P1560_P1600_ FW_Update.dmg
- Disconnect your computer's ethernet. Turn off your computer's AirPort.
- Connect the printer to your computer via USB
- Run the utility
- Follow the instructions from there

TS4579 since i have installed os X safari is not working properly and thunderbolt firmware update keps reappearing even though i have done the update .....

Can anybody Help me ,
my Mac was working great til i decided to update to OS X Mavericks and i ran the update and since then my Safari is crashing all the time and freezing too, i had to download opera which is working fine , and the update thunderbolt firmware keeps reappearing although i have done couple of times ...
I wish i didnt

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

TS3499 2007MBP, L-shaped adapter, and a firmware update that didn't work.

My replacement L-shaped adapter worked for a day on my 2007 MacBook Pro, then stopped abruptly. I've tried the SMC reset as well as the firmware update. When I tried the latter, I received an alert that my computer does not need the update.
Please help me! This is driving me crazy. The only answer I can get online is to install the firmware update, but it refuses to install. I'm assuming that means I already have the update. What's the next step for someone in my situation?
I appreciate any help you can give me.

Were you ever able to get a resolution to this? I have an 2007 MBP 17" and bought a new adapter that stopped working after 2 weeks. I bought a brand new one today, it charged the battery to about 90% and then went dead. Now the LEDs won't turn on and it will not charge or power the computer. I think the issue is with the laptop but have no idea what it could be. Has anyone heard of this before or have any ideas on how to troubleshoot/fix this? I've checked the SMC firmware to make sure it is up to date, i've reset the SMC. i've left the adapters unplugged for a few hours....nothing has worked. Please help...

After Downloading 10.5.2 Update, Computer Won't Install Update, Just Sits?

+*Hi, I have a Mac Mini running OS X 10.5.1 Leopard. I recently tried to download the 10.5.2 Update, it downloaded successfuly, but when I try to install it, it sits and the loading bar doesn't move at all. I've let it sit for several hours (12 to be exact) and it didn't move at all. I force-shut down the computer, but now I can't re-download it. The update for my computer is 182 MB. How do I fix this?*+

BigBird91 wrote:
+*Hi, I have a Mac Mini running OS X 10.5.1 Leopard. I recently tried to download the 10.5.2 Update, it downloaded successfuly, but when I try to install it, it sits and the loading bar doesn't move at all. I've let it sit for several hours (12 to be exact) and it didn't move at all. I force-shut down the computer, but now I can't re-download it. The update for my computer is 182 MB. How do I fix this?*+
There are two possibilities: You download is corrupted.
You can download the full 10.5.2 update here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1052comboupdate .html
and install it.
The other possibility is that if you have installed the recent TimeMachine/Airport update it probably won't instal anyway. There are many threads here about it. You should look them over.

How do I download ID DL1481 (firmware update for airport express)

I am unable to use Airport express 802.11g with Lion 10.7.4. I have Airport Utility 5.6. When I try to update firmware, the dialogue tells me that current firmware version is 6.3 and that's the only option I have for updating. From Apple Support page I learned there is Firmware Update 7.6.1. available (download ID 1481). However WHERE IS THE FILE??????!!!!!
I really appreciate your help,
Arto

Hello:
Airport Express updates (including firmware) are here:
http://support.apple.com/downloads/#airport%20express
Barry

Downloaded and ran firmware update, NanoPlus won't power

Similar Messages

Maybe you are looking for