Downloaded apps not starting after splash screens

I've had this device for about a month.
I recently paid the $10 to upgrade the software to version 3.0.
There are 1.9 free GB on the device.
I sync it via a Windows Vista machine.
I have not downloaded any apps through iTunes on the Vista machine. I have downloaded five apps directly onto the device through the App Store. Two of the five were free (New York Times Reader, Skype) and the others I paid for.
Everything has been working fine until this morning when I tried to open the NYTimes reader. It showed the opening screen, then dropped back to the home screen. The same is happening will all five downloaded apps.
I tried syncing in iTunes, but none of my downloaded apps is listed in iTunes on my computer. Are they supposed to be there?
I've seen a few other questions of this nature, but no solution that makes any sense to me.
I'm pretty surprised to have this happening on a Mac product. I have restarted the device twice, with no change. I have also hooked the device up to my computer and tried to sync it, but I don't see any change. I'm not really sure what I'm supposed to try to sync, since I just want these apps to work, but they don't show up on the iTunes app list on my computer.

have you tried the other troubleshooting steps?
http://www.apple.com/support/ipodtouch/troubleshooting/

Similar Messages

Some games to not continue after splash screen.

I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
What I've tried:
App troubleshooter
sfc /scannow
Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
also, I've tried some technet links but in vain.
I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
I've checked the event log and found this
Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
log for additional information.
And full details here
Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
Exception code: 0xc000027b
Fault offset: 0x000fb152
Faulting process id: 0x1418
Faulting application start time: 0x01d0227a62078008
Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
Faulting package-relative application ID: App
Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
I checked the event log in the path which you asked me to and got this
Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
And a detailed view
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
<EventID>5961</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>5961</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
<EventRecordID>71148</EventRecordID>
<Correlation />
<Execution ProcessID="1060" ThreadID="5520" />
<Channel>Microsoft-Windows-TWinUI/Operational</Channel>
<Computer>Amit</Computer>
<Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
</System>
- <EventData>
<Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
<Data Name="ContractId">Windows.Launch</Data>
<Data Name="ErrorCode">-2147023170</Data>
</EventData>
</Event>
Can the error log be of some help?

Lightroom CC will not open after splash screen. Adobe suggested fixes don't work. Can't find a damn phone number to call them.

Adobe fixes do not work. Can't find a tech phone number.

Robert,
I'm sorry you are having troubles. Did you try both option one and two in this link:
Lightroom doesn't launch or quits automatically after splash screen
If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
Pattie

Mail app not starting after Ios 7

After ios 7 update mail app is not starting. White background for 0.5sec and then back to homescreen. How do I odwngrde or is there some tip to get mail app up and running?

Same problem with Safari browser..

Premiere Pro not loading after splash screen, can't find fix on forums.

Fresh install, doesn't matter what I do to this machine, memcheck came out ok. I click on Premiere Pro CS3 icon loads splash screen, then kicks out an error code.
EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
I have a fresh install of window XP home edition service pack 3, 3 gigs of ram, Ati x1200 on board memory, (also have a nvidia 8800gt that I thought was the problem...it's not.) Most up to date drivers. Running two sata hard drives both 250 western digitals.
system information
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 1.28 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GB

ok, one more time. I have a problem with Premiere Pro CS3 Crashing after the splash screen. It loads everything right on the splash screen, but when it goes to loading the work areas, it goes white and comes up with the error code of :EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
P9 : 00000000
What ever that is.
I have an amd 4800+ Dual Core and 3 gigs of ram. An Nvidia 8800gt with latest drivers installed for all of it. Running windows XP home sp 3 build 2600 More information on my system below.
I've re-installed 3 times, and even tried a clean install of vista. I've done the hold shift while loading and get the same issue no matter what. I've Deleted the premiere folder in local settings.
I've done all the steps at http://premierepro.wikia.com/wiki/Troubleshooting
a screen capture from process explorer and cpu fan can be found here http://www.theslam.net/images/desktop.jpg
DXdiag file can be found at
http://www.theslam.net/images/DxDiag.txt
hopefully this helps.
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name DESK
System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
System Model MS-7327
System Type X86-based PC
Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
SMBIOS Version 2.5
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name DESK\Auggie
Time Zone Central Standard Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 2.36 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 5.84 GB
Page File C:\pagefile.sys
Name NVIDIA GeForce 8800 GT
PNP Device ID PCI\VEN_10DE&DEV_0611&SUBSYS_06DC19F1&REV_A2\4&3B252A0E&0&0010
Adapter Type GeForce 8800 GT, NVIDIA compatible
Adapter Description NVIDIA GeForce 8800 GT
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers nv4_disp.dll
Driver Version 6.14.11.8122
INF File oem2.inf (nv4_G9x section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1440 x 900 x 75 hertz
Bits/Pixel 32
Memory Address 0xFD000000-0xFDFFFFFF
Memory Address 0xC0000000-0xDFFFFFFF
Memory Address 0xFA000000-0xFEAFFFFF
I/O Port 0x0000D800-0x0000D87F
IRQ Channel IRQ 18
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nv4_mini.sys (6.14.11.8122, 6.01 MB (6,301,248 bytes), 12/26/2007 4:35 PM)

Apps automatically starting after lock screen

How do I disable apps from opening automatically after I enter my password from the lock screen.
For example, Facebook or Foursquare has a message and when I enter my password the iPhone automatically launches the app to show me the message. How do I disable this?

Settings>Notifications>Facebook>Show in Lockscreen>Off

Firefox 4 download will not start after the download is complete. It just doesn't run (Windows Vista), and can't be found in the program list. Solutions?

I have tried to open it both as the original user and as administrator. Nothing happens after I indicate that it should open

I was able to work the problem out by logging in as administrator. When the download was finished and extracted, a choice was offered to save rather than run. So I saved it on the desktop, and then right clicked on the icon, and selected "run as administrator". It then ran and installed with no problem.

FCP will not start not even a splash screen

I updated my 15" MacBook Pro to OSX 10.6.6 and now none of my Final Cut Pro projects will launch there is not even a splash screen that pops up. When I right click the FCP icon in the dock the only option it gives is to force quit. Has anyone heard of this happening in relation to an OS update?

Okay. I finally got FCS 2 apps and the App Store to coexist, but not without considerable trial and error. There is definitely some bad blood between 10.6.6 and FCS 2 apps. I haven't been able to pinpoint the exact problem since the behavior I experienced with FCP and Compressor was very inconsistent, but I do have some solutions that might work. I don't guarantee they'll all work as they did for me, but it's worth a shot.
1) Try launching FCP and waiting as long as you can when it hangs. Several times, if I waited long enough, the splash screen would magically appear and everything would start up as normal, even after a full minute or so.
2) Delete the Final Cut Pro System ID file and re-enter your serial number after launching FCP. Make sure you have your serial number handy before you try this. The System ID file is located in ~/Library/Application Support/ProApps/. Deleting this file allowed the serial dialogue to come up, and after entering the serial, FCP launched successfully.
3) If you have the time and patience, I highly recommend a totally clean install of 10.6 Snow Leopard and using the 10.6.6 Combo Update to get up to date. I managed to get a working Final Cut Pro and Compressor using this method, even though it was a pain in the ***. Using the Migration Assistant to transfer your files over will not break FCS2 apps. As a precaution, I did not transfer over any of my System Settings with the Migration Assistant. You can find the 10.6.6 Combo update here: http://support.apple.com/kb/DL1349
From my tests, I think there is some problem in 10.6.6 with how OS X displays custom dialogue boxes, such as the kind that drop down from the menu-bar or FCS's custom dialogue boxes and splash screens. I get hangs in MAS when it tries to display the Apple ID login and FCS upon launching. The behavior is inconsistent, sometimes hanging for 30 seconds, other times indefinitely, and I don't have the technical expertise to understand why. However, I've ruled out a disk error through a clean bill of health from disk utils and running the same OS config from two different hard drives.
Here's what I did:
1. Verified internal hard drive and made a SuperDuper backup of my internal hard drive to an external drive.
2. Wiped internal hard drive, installed 10.6 Snow Leopard, and installed Final Cut Studio from disks.
3. Installed the 10.6.5 combo update. Used Software Update to get all software up to date, but unchecked the 10.6.6 update.
Tested FCP: hang on startup.
4. Deleted the System ID file.
Tested FCP: asked for serial number, then completed launch.
Tested FCP again: launched with no problem.
Tested Compressor: launched with no problem.
5. I wanted to test the System ID fix on my old setup. I booted to SuperDuper backup (10.6.6 from Software Update) and deleted the System ID file.
Tested FCP: hang on startup.
6. Booted to clean-install (now at 10.6.5) and applied the 10.6.6 combo update.
Tested FCP: hang on startup
7. Deleted the System ID file.
Tested FCP: asked for serial number, then completed launch.
Tested FCP: initially hung on startup. However, after about 30 seconds, it surprisingly launched with no issues.
Tested FCP: took about 30 seconds to launch (no hang), but eventually displayed splash and launched with no issues.
Tested Compressor: same as above.
8. Migrated data from SuperDuper backup to 10.6.6 clean-install on internal drive using Migration Assistant. Excluded "Settings." I also deleted the System ID before testing.
Tested FCP: asked for serial number, then completed launch.
Tested Compressor: launched with no problems.
Tested FCP: launched with no problems.
9. I then launched the freshly installed Mac App Store. I clicked "install" for Evernote, and the app hung. However, after a moment, it displayed the Apple ID login drop-down from the menu bar. I entered my credentials and Evernote installed.
Tested FCP: initially hung on startup, then launched without a problem.
Tested FCP: launched without a problem.
Tested Compressor: launched without a problem
10. I decided to try one last little test. I deleted Evernote and launched both the Mac App Store and FCP at the same time. FCP hung on startup. I clicked "install" for Evernote again, and App Store hung. After a moment, though, FCP completed its launch AND the App Store drop-down asking me for my Apple ID appeared at the same time. This interested me, since it seemed to suggest that these were related incidents.
I have some process samples from activity monitor for when FCP hung, if someone would find them useful, but I can't read them at all. Console showed the following whenever FCP hung:
objc[192]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:18:36 PM [0x0-0x15015].com.apple.FinalCutPro[192]
objc[192]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:18:37 PM [0x0-0x15015].com.apple.FinalCutPro[192]
objc[202]: Class MIOTimecodeField is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeFieldTextView is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeFieldFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class MIOTimecodeSearchFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]
objc[202]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]

TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

Just rented a movie in French on my iMac... movie will not start after download ?
What I do now ?

Okay. I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest..

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com

Workflow notification mailer not starting after APPS pwd change

Workflow notification mailer not starting after APPS pwd change
The error in the WFMAILER log is
[appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
wferr:
- WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
Can you please advice ?
EBS 11.5.10.2
DB 11.2.0.1

There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
[Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
Please see these docs.
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Thanks,
Hussein

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browse

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browsers, fire wall and virus protection off and also to download the trial of Adobe Premiere Elements 13 but result is every time same.

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

EXE DOES NOT START AFTER DOWNLOADING

I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607

Downloaded apps not starting after splash screens

Similar Messages

Maybe you are looking for