Downloaded corrupted OAS 4.0.8.2 for Solaris

Any work around here, because I have downloaded a corrupted OAS 4.0.8.2(220MB or 231,006,489 bytes) and it took me a day on my office's ISDN modem.
when I untar this file it just throw me an directory checksum error. Oracle Team please help me out.
"tar xfv <filename>"
thank you.
kenneth

Its a tically error of not enough memory.
How many Mb of Ram and swap have you configured.
Best regards, Marcelo.
PD: With this combination I recomend 256Mb of ram plus 512mb of swap.

Similar Messages

  • Can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit??

    I can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit. After filling out the form with the questions...I click on the actual link, but the box never pops up. The status bar on my Internet Explorer slowly increases, but never allows me to download. It just hangs. I have tried multiple times, and I can download other verions from your site...and have many times in the past. Could you please fix this. Thanks.

    I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
    OTN

  • Downloads are Dead...Need 9i for Solaris

    Download site is down. Is there a download-west or download-east that we can use? Please provide a mirror site, if available?

    Enterprise/Standard Edition for Solaris SPARC:
    - 7, 8 and 9 can be either 32-bit.
    General Notes For Oracle Database On Solaris Operating Environment x86:
    Terminal Release:
    RDBMS 8.1.7 is the terminal release for this platform.

  • Where can I download 8i(8.1.7 or any) for Solaris 8 x86? I really need it. Thank you!

    Oralce 8.1.7 for Solaris 8 on x86.
    I need it badly. Thank you!

    I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
    OTN

  • Where do I download Oracle ESB 10.1.3.4 for solaris sparc?

    Hi,
    Where can I download Oracle SOA Suite ESB 10.1.3.4(only ESB, BPEL is not required).
    I could find the following link:
    http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
    which has Oracle Enterprise Bus 10g (10.1.3.1.0). What is the patch number for upgrading this to 10.1.3.4?
    I believe we get latest Oracle Apps and database adapters out of box with ESB 10.1.3.4. If not please suggest me where I can get these.
    Also I need an SAP adapter which is not given by default with ESB 10.1.3.4. Please suggest me where I can download this from and how I install it.
    Please give me the links for downloading
    Oracle SOA ESB
    version - 10.1.3.4
    Operating system: Solaris Sparc
    Adapters: SAP, Oracle Apps and database.
    Thanks.

    Thanks Marc.
    I was not able to find the patch on metalink. Could you please give me the patch number specific to only ESB 10.1.3.4 if you have.
    I have the 10.1.3.4 patch number(7272722) for the complete SOA suite.
    Also please comment on adapters part.
    Thnaks.

  • Downloading the licensed verion of oracle 10g for solaris

    Hi all,
    Can any one tell me,
    where can I donwload the licensed version of the Oracle 10g for solaaris. I already have licensed metalin kid ( valid support identifier) and also EULA agreement withe ORAcle,
    Where can I get that download link.
    Thanks all for your valuable cooperation.
    Regards,
    Surya

    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Cheers, OTN

  • Sun Cluster 3.1 64 bit support  for Solaris 10

    Hi:
    I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
    1) Does Clutster 3.1 for solaris 10 support 64 bit?
    I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
    Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
    2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
    Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
    Thanks in advance!
    BRs
    //rdctahu

    Hi,
    Comments on your 2 questions:
    1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
    Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
    fine.
    As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
    2) See (1). You are good.
    Go for it.
    HTH,
    -ashu

  • Reg: Oracle 9i Enterprise Edition software for solaris x86 (32-bit)

    Hi,
    Where can i download the Oracle 9i Enterprise Edition software for solaris x86 (32-bit).
    Thanks in advance.
    Edited by: ora_man_8873786 on May 14, 2011 12:50 AM

    If you have a CSI you can always order the CD at My Oracle Support by submitting a SR.
    Sybrand Bakker
    Senior Oracle DBA

  • 9i for solaris on intel?

    Hi,
    I have a 8.1.7 running on Solaris 8 for Intel. In the download area I can find only 9i for Solaris on SunSparc. Is there no version for Intel based Computers? The Sparc 32 bit version produces an error, if I try to install.
    Thank you
    Emil

    Hai,
    This is chandra sekaran from singapore, actually i want intel based soaris oracle free cd any verson. Please if you have send one copy by shipping i pay and collect or where i can download. I need very urgently, help me to get as soon as possible. Is there any possible to download from website. please mention the website name. I may download it.
    thanking u
    my address
    S.Chandra sekaran
    Blk 84 # 07-93
    Commonwealth close
    singapore 140084
    by chandran.s

  • Creating Disk Image for Solaris 8 Admin Pack

    Hi,
    When I download the zip files "Software CD Image" for Solaris 8 Admin Pack / Solstice AdminSuite 3.0 and "Documentation CD Image", I get a zip file containing the contents of an installation disk (ie files and directories) rather than ISO files for creating a disk.
    lf I then burn these to a CD (in either UDF or 9660 format) and try to install, it fails for various reasons, not least of which is the fact that the top level installation file does not have X permission. I know that I could copy these files to the Sun, change permission and run from there, but for various reasons I also need to be able to install from CD.
    Does anyone know either how to create a CD with the correct format / file permissions / etc, or alternatively where the correct ISO's can be retrieved?
    Thanks in advance.

    Partition before installing, then try it. Alternatively, use something like Carbon Copy Cloner or SuperDuper! to put a bootable backup/clone onto the partition. That gives you something that you can immediately verify. A disk image requires restoring before you can be assured that it's viable. I've beta-tested Panther through Snow Leopard and have never made a disk image, only clones. Finally, creating the disk image takes much more time to create than does the clone. Just my 2¢. BTW, the image is useless unless you can successfully restore it. I have no idea why it's not working for you.

  • NEED HELP WITH A DOWNLOAD FOR MY MAC OS 10.4 IT DOWNLOADED CORRUPT CAN YOU HELP & SHOW ME WHAT ONE I SHOULD DOWNLOAD FOR MY MAC OS .10.4 THANKS BETTY

    I HAVE HAD FIREFOX WITH MY MAC OS 10.4 FOR QUITE A WHILE TILL I DOWNLOADED AN ADD ON WHICH WAS MY POINT FINDER IN MY POINTS-AFTER THE DOWNLOAD IT DISABLED MY COMPUTER TOTALLY I COULD NOT DO A THING BUT TRASH IT! THEN I REINSTALLED IT LATELY AND THIS TIME IT DOWNLOADED CORRUPT!! YIKES--- I WAS HOPING MY COMPUTER WOULD NOT CRASH! I SO NOT KNOW WHAT TO DO NEXT FOR AMY BROWER I TURNED TO SAFARI THEN-I DON'T THINK FIREFOX LIKE MACS-- AM I RIGHT? IT CRASHED OFTEN ALSO!! THANKS BETTY

    Try http://eshop.macsales.com/shop/hard-drives/External-Enclosures/
    If you have question about any items on their page, MacSales has an extremely god technical support staff.
    Allan

  • Where I can download corrupt pdf viewer for me?

    I found some broken pdf files doing a raw recovery from Ontrack and receive similar issues when trying to open these files (I tried to match some up based on file size. How to view corrupted pdf? Where I can download corrupt pdfviewer for me?

    Wait some hours and you will get a reply with a spam like on forums.planetpdf.com

  • When will OAS 4.0.8.1 for NT be available for download?

    OAS 4.0.8 has been out for ages and 4.0.8.1 was recently
    released. When will OAS 4.0.8.1 for NT be available for download?
    Thanks.
    null

    After I fixed some of the things I broke while searching for the wrksf failure, the PL/SQL Cartridge now works for me too. And, after failing to get the DB Browser to work by loading it into the SCOTT schema, I got it to work by loading it into SYS. (SCOTT can't see the DBA_* views so loading the DB Browser into the database failed.) I haven't tried any Java Servlets yet, but that's next on my list.
    If you want to try my wrksf workaround, rather than using Christoph's, here's how you can do it.
    1. Backup liborb.so in the $ORACLE_HOME/orb/4.0/lib directory, just in case something goes wrong.
    2. Using a hex editor, such as emacs hexl-find-file or ghex, to edit liborb.so, find the string "/proc/stat".
    3. Change the directory, "/proc" to something like "/pfoo" and write the shared library file back to liborb.so. You now have the required modified liborb.so.
    4. Make the /pfoo directory and cp /proc/stat /pfoo.
    5. Edit /pfoo/stat and duplicate the first line, which should be the cpu line. This will let the metrics parser handle it. Make sure that /pfoo/stat has read access.
    Of course, the values that the metrics code gets are now bogus, but that does not seem to be a fatal problem.
    Hopefully somebody from Oracle is reading this and the real fix will be in the mail soon.

  • My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

    My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

    Rasco1 it sounds like your managed network needs to be configured to allow you to download successfully.  You can find more details in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • How to download Adobe Flash Player Lite 2.1 for Symbian Belle?

    Greetings.
    I would Like to ask if someone would be so kind and tell me where or how couls I download Adobe Flash Player ite 2.1 for Symbian Belle?
    I registered on Adobe and gone to downloading page clicked to link :
    Download the free Flash Lite 2.1 player for Nokia S60 Symbian devices.
    When I do so I am redirected to another page and no download has started not any explanaton to what happaned was given.
    Could You help please ?
    Thank you in front.

    Hi, I have tried to download from link provided in Your reply, but as I start to install message pups up about files being corrupt.
    Tried again downloading file directly to phone, same error.
    Could You help, please ?
    Other thing, is this flash program or just a tool to make one, I am not sure... ?
    Thanks.

Maybe you are looking for

  • Valuated Stock to move to Non Valuated Stock

    Dear Gurus I am looking into an issue from FI perspective and need your valuable inputs. Business Case: We have two plants (Plant A & Plant B). Customer would return expired stock to Plant A and these would be kept in Blocked Status as per QM guideli

  • Camcorders for Final Cut Studio what to look for?

    Hi i am getting into motion graphics, green screening, and lots of effects. I have been trying to use my isight but it is so hard to key. I have a few question about camcorders as well. This is the only place i could think of to ask. Hears what i am

  • Save user input data

    I would like the ability to have a settings screen and allow the user to enter parameters.  These parameters need to be saved even when the program (VI) is shut down.  As an example I made a quick simple program, Sample test 1.vi.  Here there is inpu

  • Sorting a Drill Down Report by summary values in Crystal 2008

    Hi All, I'm a newbie to 2008 but have been using Crystal 7.0 for years, so am trying to find the best 'new' way to represent report data I have. The data consists of various Product details (code, description, colour, size, Category, Sub Category) an

  • A query report of sales invoices

    Hello everyone I need help with writing a query report of sales invoices with items of the item code, last buy price, sale price, customer's name .. But the report will not be true unless it will show credits invoices' total of sold items. I'd be hap