Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

Similar Messages

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

HT201436 Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me

Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?

When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.

Cannot download drivers for the HP office jet 4635

I cannot find and download drivers for my MAC. On verious support pages for downloading drivers, I enter the procuct name "HP officejet 4635" and enter and only blank pages come up and I cannot continue. It's a new printer and I am about to return it and buy another brand.
I was able to install it for my Windows machine, but most of the use will be on the MAC.

Hi,
Download and install the software below:
http://ftp.hp.com/pub/softlib/software12/COL49513/mp-120051-4/HP-Officejet-4630-series_v12.30.0.dmg
Be sure to select HP Scan while installing to get full functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Download link for PS CC does not work

I am in the CC area, click on PS to download and the link does not work. Here is the link. Any ideas? Working on a Mac; browser is FireFox.
Same issue occurs when trying to download AI from CC.
aam://SAPCode=PHSP?productVersion=14.0?passPhrase=Qrm0F9IdGKvpaqBy+4xfM5lOVjrbpmIweKyRgE7A +BqIFujuZhd6TPbicQ26g2ENYDvavIaSUbhb9BXZi83+Angu3EOQc+ntLN6A+aQp/ewWvbhau5iP8ohOSLKpfNJlYT 4bEoGiRkVT1a3siLb7QGha/SK/mjCUPNQIynZDH7M=

Hi maurak,
Please use Creative cloud desktop app to download all CC Apps. You can download the CC desktop app from this link.
https://creative.adobe.com/#products
Regards,
Abhijit

Sorting for the procedure is not working

can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rows
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER              R IDESCR                                   IDESCRL                                                      IUNI IS I ITEM
2011.601/00002          1 TUNNEL CONSTRUCTION LAYOUT STAKING       TUNNEL CONSTRUCTION LAYOUT STAKING                           LS   0
2011.601/00003          2 CONSTRUCTION SURVEYING                   CONSTRUCTION SURVEYING                                       LS   05 N 2011601/00003
2011.601/00010          3 VIBRATION MONITORING                     VIBRATION MONITORING                                         LS   05 N 2011601/00010
2011.601/00020          4 REVISED BRIDGE PLANS                     REVISED BRIDGE PLANS                                         LS   05 N 2011601/00020
2011.601/00040          5 DESIGN                                   DESIGN                                                       LS   05 N 2011601/00040
2011.601/00050          6 DESIGN AND CONSTRUCT                     DESIGN AND CONSTRUCT                                         LS   05 N 2011601/00050
2011.601/08010          7 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08010
2011.601/08011          8 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08011
2011.601/08012          9 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601/08012
2011.601/08013         10 SUPPLEMENTAL DESCRIPTION                 SUPPLEMENTAL DESCRIPTION                                     LS   05 N 2011601
10 rows selected.
SQL>
SQL> exec trnsportitems.gettrnsportitems(1,10,'idescr DESC', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER              R IDESCR                                   IDESCRL                                                      IUNI IS I ITEM
2563.613/00040          1 YELLOW TUBE DELINEATORS                  YELLOW TUBE DELINEATORS                                      UDAY 05 N 2563613/00040
2563.602/00100          2 YELLOW TUBE DELINEATOR                   YELLOW TUBE DELINEATOR                                       EACH 05 N 2563602/00100
2565.602/00940          3 YELLOW LED INDICATION                    YELLOW LED INDICATION                                        EACH 05 N 2565602/00940
2502.602/00040          4 YARD DRAIN                               YARD DRAIN                                                   EACH 05 N 2502602/00040
2411.601/00030          5 WYE STRUCTURE                            WYE STRUCTURE                                                LS   05 N 2411601/00030
2557.603/00041          6 WOVEN WIRE FENCE                         WOVEN WIRE FENCE                                             L F 05 N 2557603/00041
2557.603/00043          7 WOVEN WIRE                               WOVEN WIRE                                                   L F 05 N 2557603/00043
2563.613/00615          8 WORK ZONE SPEED LIMIT SIGN               WORK ZONE SPEED LIMIT SIGN                                   UDAY 05 N 2563613/00
2563.613/00610          9 WORK ZONE SPEED LIMIT                    WORK ZONE SPEED LIMIT                                        UDAY 05 N 2563613/00610
2557.603/00035         10 WOODEN FENCE                             WOODEN FENCE                                                 L F 05 N 2557603/00035
10 rows selected.

Hi,
user13258760 wrote:
can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rowsAs it is written now, the argument insortexp has nothing to do with the order of the rows. It is used only in computing column r, and column r is used only in the WHERE clause.
Are you really saying you don't want a WHERE clause at all in the main query: that you always want the cursor to contain all rows from itemlist that meet the 3 hard-coded conditions:
...                     WHERE item '2999509/00001'     -- Did you mean != here?
                          AND iobselet = 'N'
                          AND ispecyr = '05'?
If so, change the main query WHERE clause:
WHERE r BETWEEN instartrowindex AND inendrowindexinto an ORDER BY clause:
ORDER BY rBy the way, you might want to make insortexp case-insensitive.
In your example, you're calling the procedure with all small letters in insortexp:
user13258760 wrote:
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);but the output is coming in ASC ending order:
...                           ORDER BY
                                 DECODE (insortexp, 'itemnumber ASC', item) ASC,
                                 DECODE (insortexp, 'itemnumber DESC', item) DESC,     -- capital 'DESC' won't match small 'desc'
                                 DECODE (insortexp, 'idescr ASC', idescr) ASC,
                                 DECODE (insortexp, 'idescr DESC', idescr) DESC,
                                 DECODE (insortexp, 'idescrl ASC', idescrl) ASC,
                                 DECODE (insortexp, 'idescrl DESC', idescrl) DESC,
                                 DECODE (insortexp, 'iunits ASC', iunits) ASC,
                                 DECODE (insortexp, 'iunits DESC', iunits) DESC,
                                 DECODE (insortexp, 'ispecyr ASC', ispecyr) ASC,
                                 DECODE (insortexp, 'ispecyr DESC', ispecyr) DESc,
                               SUBSTR (item, 1, 4) || '.' || SUBSTR (item, 5)          -- This is the only non-NULL ORDER BY expression     Why not declare a local variable:
sortexp      VARCHAR2 (20) := LOWER (insortexp);and use that variable instead of the raw argument in the query:
...                              DECODE (sortexp, 'itemnumber asc', item) ASC,
                                 DECODE (sortexp, 'itemnumber desc', item) DESC, ...Also, this site doesn't like to display the <> operator, even inside \ tags. When posting here, always use the other inequality operator, !=
Edited by: Frank Kulash on Jun 15, 2010 3:25 PM

I am trying to connect a printer but when the pc searches for the drivers/software it says there are none for this version of lion? 10.8 I have downloaded drivers for the 10.7 version but still cannot get it to accept any ideas?

I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanks

You will have to try the xerox website for the latest drivers for Mac OX system you are using
http://www.support.xerox.com/support/engb.html
It may be that your printer is not supported. You do not specify which model you have so unable to help further.

Is there any fix for the flashplayer installer not working on a windows 7, 64-bit, using firefox?

I Hit the download link, get the permission windows, and the flashplayer installer window comes up, but doesn't do anything. i left it up all day when i went to work, come home 12 hours later and it was still just sitting there not installing. Is there a fix for this? i have looked everywhere and nothing that i have found has worked. even the suggestions on the adobe help page doesn't work..

And you used the offline installers from the link that Andy posted:
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI
If yes, please post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

Sound for the cd player not working

I've just about worn out my resources on this one.
The OS is 98, the motherboard is msi 648 max, I downloaded the sound drivers loaded them onto the computer. Sound works on everything except the cd player
I checked the regedit, and everything seems normal there. I even uninstalled the drivers and reinstalled them, uninstalled and reinstalled the cd player, I even downloaded and put on directX 8
am I missing something and before anyone can mention yes I checked for conflicts, nothing is too obvious.
and I can't change the IRQ mainly because the sound card is onboard the motherboard

theres no analog cable between the mobo and cd rom
dont need it expand the drive in device manager and tick the box for digital out
ummmmmmmmmmmmmm where exactely is the check for that? I can't find it

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

Downloaded drivers from microsoft, now internet not working. please help

Internet connection lost after downloaded drivers updates

Install drivers from motherboard/notebook support pages.
I do not use optional updates, namely MS drivers.
Sometimes removing driver in Device manager and restart may cure your computer.
Consider HW and operating system update. From the point of view of security it is not wise to keep using Windows XP.
Rgds
Milos

LJ 3600 drivers for Storage Server 2008 not working

we have several LJ 3600 printers in our environment and would like to install these on our new server:
Win Storage Server 2008-64-bit
but have had no success printing with any drivers out there.
I have certainly tried the host-based drivers
All I ever get is a page: @PJL SET JOBATTR=JobAcct4=20110426125259...etc
can you suggest a new driver to use?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
thank YOU for any help you can offer!

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

HP pavilion dv6-6c53cl - NO SOUND, DOWNLOADED DRIVERS FOR BEATS BUT WILL NOT INSTALL

I lost my hard drive, had no back up so did a fresh install to windows 8 (64bit). lost all of my sound. i tried to re download drivers , they download but fail to install, get a window that says ; "the hardware detected is not surpported by this IDT software package, the install will abort". I have tried different IDT packages with no success.. please help.

Are you using drivers on your model's support page here?
http://support.hp.com/us-en/product/HP-Pavilion-dv6-6c00-Entertainment-Notebook-PC-series/5191856/mo...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Approver for the application role not working out

Hi,
I have created a role with type application and Approver A, then created a business role with the Approver B and included application role into the business role.
When i assign this business role to a user the only request for approval goes to Approver B and after approval the both application and business roles are assigned. Strangely it seem to skip the Approver A. I did even remove the approver in business role, leaving only approver in application role, still same result - it skips Approver A.
I'm using IDM 8.0.0.1, any ideas why it would skip the approver in the included role?
Thanks!

Thanks for the quick reply. I've tried optional with approval and here is what I found.
It seems I need a combination of the two. My end goal is to have a second level approval, one group would be responsible for approving the business role and the system owners would be responsible for approving the nested application roles. When a user requests the business role, they must have approvals for the business role and all of the nested application roles for their request to be completed.
If the app. roles are required, the workflow automatically incorporate the nested appl. roles in the request but does not require approval for them. If they are conditional with approval, the user would have to submit a second request to get all of the nested application roles. It looks like I need a combination of the two, required with approval.
I need it to behave like it does when you have a role with approver that includes resources with an approver. The role and resources must all be approved before the request can be completed successfully.
I'm trying to see if this is possible through the GUI before I customize the workflow.

Queries based on Master data for the particular periods not working

Hi,
My Queries are based on master data and for 2007 we did not have customer groups define hence for the historical also we would like to display the customer groups hence we are reproting based on master data. But when iam executing my reprots for each and every month for the 2007 , i can able to execute the reprot properly but same when iam giving the values in ranges with the help of input filed ( calender month -interval) its taking hours but unable to retrieve the data for the 6 months at a time even if iam restricting the values in the queries still the problem is same...
Can anyone has an idea what would be the problem .. its only for 6 months
Thanks

Hi
Master data report consumes much time. try to see the Query Statistics and make the performance tuning.
Recheck your data flow for routines at TRules/upRules level.
Recheck on the Query designer for formula/ Cmod Variables.
The report fetching time even depends on the NO.of records too.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dcd70-41a8-2b10-9f8f-dc5c68769753
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6009e125-e9a3-2a10-c6a9-e1483dfa2e1b
Hope ithelps

Downloaded drivers for the MS6570 do not WORK - HELP!

Similar Messages

Maybe you are looking for