Downloaded image won't load on a MAc with Snow Leopard 10.6.6

Is 3.6.14 compatible with OS10.6.6? The file downloaded, but I can't mount the dmg

Have you downloaded iPhoto 11.0.1? You migh also get more info posting this on the iPhoto forum. Best of luck.

Similar Messages

Sony e reader prs 600 not showing in bookmark pane on my new Mac with Snow Leopard

I have a brand new sony e reader prs 600 it is supported but I am unable to see it on the bookmark pane in my new Mac with Snow Leopard is it something to do with Snow leopard? Or why can I not see my sony e reader? thank you

According to the Adobe website ADE 1.7.1 is compatible with Mac if you
look at system requirements and with the Sony reader if you look at
supported devices. Though it doesn't mention Macs latest O/S.
and if I download an Adobe digital editions book, can I then move it
to Sony's ebook software, or is the format unsupported on the Sony
Ereader?

Can I download 'Mountain Lion'within a few weeks, when available, without downloading 'Lion' first? I'm still working with 'Snow Leopard.

Can I download Mountain Lion' when available without downloading 'Lion' first? I'm still working with 'Snow Leopard'.

Yes.
Upgrading to Mountain Lion - http://www.apple.com/osx/how-to-upgrade
Mac OS X: System requirements for Mountain Lion (10.8) - http://www.apple.com/macosx/specs.html
Lion and Mountain Lion application compatibility - http://roaringapps.com/apps:table

My Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder. The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

My
Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.
The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

tried another cable (from a camera) with no joy. However after turning off TM and searching for the EHD and not finding it, I revisited Disk Utility and can 'see' it there. The bad news is that it says,
Verifying volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

Firefox keeps prompting me to download the newest version. However, if I do that I will lose my text formatting toolbar, which is very important to me. I am on a Mac with Snow Leopard. What should I do?

I don't know the difference between a plug-in and an add-on or an extension. All I know is that I am happy with the current version of Firefox (I think it is 3.6.6) because it allows me to use the text formatting toolbar. The last time I followed Firefox's advice to upgrade to a new version, I discovered that there was no compatible toolbar, and I spent a long time getting back to 3.6.6.
If the new version does not have a compatible text formatting toolbar, I don't want it, and would like to stop getting these prompts.

I'm having difficulty visualizing what is wrong but try some basic steps first:
Launch Safari while holding a Shift key - this will start Safari with just your Home page
If you can see Reset Safari from the Safari menu, try that.
In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

How do I transfer files from mac with snow leopard to a new retina display mac

What is the easiest way to transfer files from my old mac(2008) snow leopard to my new retina display mac book pro?

Easiest? Well there is some sort of wireless transfer thing, but I hear it takes FOREVER like several days and it's glitchy.
The Retina doesn't have a Firewire port I believe, so Target Disk Mode is out, unless you have a adapter and I don't know how well that will work out. Cost another $30 for the adpatper I bet.
The likely most easiest?
Run down to any computer or office store and pickup a powered external USB hard drive that's the same size or larger then the old Mac's boot drive.
Boot the old Mac and download Carbon Copy Cloner.
(or use the TimeMachine if it asks, but it takes a reallly long time and if there are problems, then it's harder to recover files from)
Format the external drive in Disk Utility with Partition: option GUID and OS X Extended Journaled (default setting)
Use CCC to clone OLD A boot drive to External Drive B, takes about a few hours depending how much stuff you have.
Hook up drive to new Mac, (either clone or TimeMachine drive)
Use the free Migration Assistant in your Application Utility folder to transfer over, but creates a new user account (you can later delete one)
Or if you haven't set up the new Mac yet, when you do set it up during that process, you can transfer from the External Drive B and it won't have the account you set the machine up with naturally just uses the ones from the clone or TimeMachine drive.
Once your fine and dandy on the new machine, then Disk Utility erase and use the external USB to create either a bootable clone with CCC or a TimeMachine drive for backup.
Since you need a backup drive anyway, this method is better and happens to be reliable and easy.
Most commonly used backup methods

Installing Lion and formatting my Mac (with Snow Leopard)

Hey everybody!
I have a MacBook Pro with Snow Leopard.
I want to install Lion from the App Store and format my Mac. How should I do it?
Thanks!

Aha!
The proper way to "clean" a computer before selling it is to zero the hard drive. This will make all your data irretrievable.
Steps for zeroing the drive Disk Utility:
1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Choose the entire disk (top icon).
4. Choose erase tab.
5. Click on Options
6. Choose "write zeros".
7. Erase
This will take a bit of time because the computer is physically writing zeros to each block.
You should then re-install the original OS from the system disks and deliver the Mac to the new owner with the system disks that shipped with it.
If you want it to boot as new at startup, do the installation of OS X and follow the onscreen prompts until it asks you to enter a username and password to create your first account. Quit the installer and shut down the system. The next time the system is powered on it will display the same welcome message and be ready to setup OS X.
Or you can delete the AppleSetupDone file.
rm -rf /var/db/.AppleSetupDone

Adjustment brush not working on new Mac with Snow Leopard

Just purchased a new computer a couple of weeks ago. Not sure if something is incompatible or something else. I'm can't remember if the brush ever worked on the new machine. Also updated to Snow leopard 16.2 during this period.
I see the adjustment brush and can change it's size and feathering, flow and density are set at 100%, masking is off, it set down control points, but that's it. It makes no visible changes to the image in any mode. If I put exposure at 4 stops and place it on a mid-tone there is no change to the image, either in Lightroom or upon export.
I've run permissions checks, trashed the preferences and repaired the drive with Diskwarrior all to no avail.
Lightroom 2.5, Power Mac 2.66 Ghz Quad Core Intel Xeon, 6 GB of factory installed memory, Snow Leopard 16.2
Should I try a fresh install of Lightroom??

Sorry,
My post above should have read Mac Pro. I recently switched and keep getting the names mixed up. Doesn't help that they look the same.
Rich Quindry

How can I download a version of Pages for my computer with Snow Leopard

How can I download a version of Pages for my old MacBook that can only run Snow Leopard?

Hi nteo,
See this Mac knowledge base article.
Snow Leopard must be at least version 10.6.6 to access the Mac app store. Use Apple menu > About this Mac to determine the version you have installed. Use Software Update to update the OS, if necessary.
Regards,
Barry

Help please - GB won't work - Midi driver conflict with Snow Leopard

I use Snow Leopard 10.6.8 on my MacBook Pro. Ever since I upgraded to this version GarageBand won't work. When I try to launch it I get 3 or 4 pop up screens saying GB has detected software midi conflicts please update your midi drivers. If I click through these and wait for 3 or 4 minutes, GB does open but it takes ages to change anything and it shows there is no Core Audio. It also won't 'Play' an already recorded track and there is no sound for anything.   I have several plugins Including Line 6 Podfarm, and the midi drivers for Melodyne and record through an old Tascam US122 with midi.
One driver for the Podfarm was automatically put in an incompatibel Software folder when I upgraded. I put this file in Trash and updated my Podfarm drivers but it's made no difference.
In GB Preferences it shows the Tascam US122 as my recording/playback and my midi device, but also 'no midi device detected' even though it is connected.   There are no driver updates for this old Tascam model.
Everything still works perfectly in Melodyne. How can I find out which driver(s) are involved in the conflict for GB? I have no guarantee that even if I buy a new Tascam interface, or any other brand, that GB will work, even then.
Is there a way to identify which driver, or drivers, are the problem? Surely that is not beyond what a MacBook Pro can do?

I should have mentioned I use GarageBand 2009. I've read other posts all over the web where people have trouble with this Tascam US122 but with the older Leopard versions. I had no problem with ordinary Leopard 10.5.6 - it's only since I upgraded to Snow Leopard, and it's only in GB.
I've tried a powered hub which has helped others, but doesn't help with my problem.
I reallly only want to know which driver/drivers are the problem.
Then I can work out a solution, even if it means buying a new interface. So long as I can't identify what the problem is, I'm not prepared to buy new equipment that might make no difference at all.
Bad luck with your electronic drums macuserrich - it's annoying isn't it!!!!

Buying a new mac with snow leopard vs. lion?

I've been saving up to buy a Macbook pro for sometime, to make the PC to Mac switch, and after the announcement of lion I've been considering waiting to buy a new Macbook until lion comes out. I'm not entirely sure about this decision though because of new OS bugs and the like so I was wondering if anyone had any advice on waiting until lion comes out to buy a Macbook or just buying now while snow leopard is still out and wait to update to lion in the future.

As Paul indicated, there's no sense in waiting. Lion, while announced, still has not received a release date. In addition the current architecture (Sandy Bridge) is the latest and greatest. Intel and Apple are always working on new stuff, so even if you wait for Lion there's a new machine being assembled in China the day you purchase the "latest and greatest."
Another thing to consider is compatibility. With any new major release there's going to be problems/issues and existing software compatibility issues. As a "switcher" you'll also need to purchase new software, as just about all of your existing PC software will not be compatible with OS X (Snow Leopard or Lion for that matter).
Personally, I don't think there's any compelling reason to wait. Apple does not always release new hardware with a new OS.

HT1338 I have a problem with my mac with snow leopard 10.6, the Iphoto app will not load ant of my photos

my mac will not open iphoto with my photos. the app opens and the circle just keeps spinning. I have tried reinstalling the ilife , i have tried holding the command and option keys and fixing it that way , nothing works.

Have you downloaded iPhoto 11.0.1? You migh also get more info posting this on the iPhoto forum. Best of luck.

Can i download icloud on my mac with snow leopard?

Where do i find the icloud download for my mac?

You can't download it - you need Lion (which includes icloud); you can purchase it at the app store as long as your iMac is a Core 2 Duo and has a minimum 2 GB RAM - mind you, that is an absolute minimum: 4 GB would be much better.

I have installed firefox3.6 on my mac with snow leopard, but firefox will not open when I click on the icon.

It seems that firefox installed correctly, but then it wouldn't open. I restarted my computer and still the same problem. I uninstalled it and reinstalled it and still the same problem.

Also having the same problem.
I have tried the following with no luck.
*Uninstalling and deleting profile + profile.ini then reinstalling
*deleting the .parentlock file
*deleting and reinstalling version 3.6.8.dmg
*Checked the activity monitor that the application isn't listed as running
*Downloaded addtrap and uninstalled again
all with no luck.
Try some of these first as they might fix your problem but not mine! ;)
If anyone knows of something I may be missing I would appreciate any help.
Thanks

Downloaded image won't load on a MAc with Snow Leopard 10.6.6

Similar Messages

Maybe you are looking for