Downloaded iTunes 11.4 and can't watch movies any more

I just downloaded iTunes 11.4 and since I cannot watch any movies. No matter if it is in the Library or in iTunes store, all I get is broken-up picture and the sound.
Any suggestion?

And now I am not even allowed to edit my own post?? Come on Apple I am at the very limit to get rid off this bloody thing called MacBook.
I got an error message when I tried to play one of the movies from my iTunes library: "The selected movie won't play on your display. This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection).

Similar Messages

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash but somehow managed to delete the bin instead. Does anyone know who to reinstate it?

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash bin but somehow managed to delete the bin instead. Does anyone know who to reinstate the bin?

You are running 10.6.8? If yes, I assume you have your install disks? As the trash bin is part of Mail app and that is an integral part of the OS, the only way I know to get it back is to reinstall the OS. You won't lose any files, just reinstall the OS over the top of the current system.

I "lost" a movie - "Mindhunters" and can't get it any more! No support!

I've never got the movie, but sometimes I am getting a reminder (!?!) podded to my iPad - but no way to get hold of that Message/Pod
So I tried to dowload the thing - no way - always says "already downloaded ...." but's not here! In iTunes (looking at my device from the PC) it is even showed on my device under Movies! But it was never there and I'm not able to start/see it in any other suitable way!
Trying to set that movie to the Wishlist produces Error (in German): "You have already bought that artikle.... .. got to Store-Menue and look for 'availiable downloads' there" - shot enclosed down.
The mising movie's not there! (and also not here). I tried to get any help - no way:
Support "Express Lane" does not allow me to enter any question from my Win7 PC - while anything else workes fine with iTunes etc. from that environment.
Perhaps somebody can help, or get the unrechable Support working, by sending a note about my question to them. You may tell them my Apple-ID - my E-Mail freely : ([email protected]), would be nice, thank you!
Chris

Try to perform a HARD RESET on the printer first. Unplug the power cord from the printer, and leave it out for 30 seconds. Plug it back in, see if it aligns and finishes the job.
After alignment, try to print a test page from the printer or make a copy. This job is to make sure that the HARDWARE of the printer is working correctly.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Can't watch dvds any more. Error: RADIO. What's that suppose to me

Title says basically everything I need to know. Why, when I use the remote to open the creative media source engine to play a dvd and I try playing it it says Error: Radio. I mean, come on, what's the Radio got to do with watching Dvds? I get a nero dvd encoder error or something when I try using InterActual, so I end up just using either Windows media player or VLC. I use VLC instead because I basically use it for everything video related. My point is, I need help. How do I get rid of this Radio error message and play some dvds? I've tried reinstalling and everything as well. I want to use the program because I can use the remote with it. I removed the front cover of my case just to use this remote but now I cant really.
Specs: ASUS a8n32-sli deluxe, 7800gt, x-fi fataly Rev A with a heat sink on it, amd 3800x2, TWINX2048-3500LLPRO Corsair ram, and.... some sony dvd dual layer burners, oh yea, windows 64bit sp.
I used to be able to play movies on my old abit an8-sli, but since I've switched, It's been doing this. It's also harder to install this card on this motherboard because the cd drivers will not detect the card after you install drivers from the cd, I end up downloading the beta drivers off of creative to install, but did not try downloading media source from there for I dont know if it would do the same and if it would work with the remote. Games and everything plays fine besides some times the card mixes sounds that should be going to the left and end up being on the right and vise versa.

Nope, does not help =/.
I've only have one decoder on my whole computer, VLC is just a program that has the codecs and decoders intergrated with it so no other players or system files can use them. It's a fresh install of windows and after I installed windows I went straight to chipset drivers (lan, mobo, nforce4, etc). After those I went and installed the video card and the sound card. I then rented a movie and tried playing it. Thats when I got the error, then I nero for a quick decoder because I did not want to go searching through my cds for my purenvida decoder thing.
I went and installed interactual from the cds for my mobo and gave me a corrupt decoder so I needed to watch the movie fast so I just went and installed VLC. After the movie, I uninstalled nero and got the pure nvidia decoder in and the same thing happens. I did remove everything even all registries going to the nero decoder and still the thing presist. The only decoder/codec on my computer now is the purevideo thing. The stuff still happens.
But this time when I installed the purevideo and went into interactual(after updates), it said I cant access the sound drivers for the program. Gi'ves me the following Problem:
You receive an "Audio Subsystem" error in InterActual Player when you attempt to play the disc.
Solution:
If you encounter an error in the Audio Subsystem when trying to play a DVD in InterActual Player, this usually means that there is an audio component of your system that is needed by InterActual Player, but is not available. Please make sure that any media programs that could use sound resources in your system are shut down. Examples include RealJukebox?, Music Match Jukebox?, or WinAmp. If any of these programs are running in the background, please make sure they are shut down, and try the DVD playback in InterActual Player again.
DVD playback in InterActual software usually uses the DirectSound components of your computer, which are installed with the DirectX set of drivers provided by Microsoft. If you continue to encounter the error, this may mean that DirectSound is not working properly on this system. Problems with DirectSound will most likely affect any program that depends on it, including some audio programs and many games. It may be necessary to upgrade or reinstall DirectX on your computer, as well as upgrading or reinstalling the drivers for your sound hardware as a potential solution to the issue. Please contact your computer manufacturer for help in doing this if you are not sure how to do it.
If nothing else works, this may simply be an installation problem with the DVD playback software provided on your computer, which is causing audio components to not be accessible. You may be able to resolve it by uninstalling and reinstalling this DVD playback software, using the software discs provided by the computer manufacturer. After doing this, try the DVD in the InterActual software again.
I've also tried this with no success now. There's something keeping the directx feature accessing the card is what I think that radio error is for. So, now all I need to know is how to fix this little problem if any one knows.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I have just downloaded itunes 10.6 and in the process my "podcast" option under library has disappeared! The files are still on my laptop. I can also see some of my recorded music in my itunes library but can play them - there is an exclamation mark next

I have just downloaded itunes 10.6 and in the process my "podcast" option under library has disappeared! THe files are still on my laptop. I can also see some of my recorded music in the itunes library but can't play them - there is an exclamation mark next to each track. Basically I can't use itunes - is the only option remove and replace? Thanks in advance

Visibility of the Podcasts section is controlled from within the Edit > Preferences dialog.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
Missing tracks
Typically this can happen because a file or folder is accidentally shunted to the wrong location. iTunes can also get confused if it expects to be talking to an external drive which isn't there. If will often reset the default media folder location and may have trouble finding files in the old folders.
Select one of your tracks that is missing in action. Press CTRL-I to Get Info. Cancel when asked to try to locate the file, then look at the location given on the summary tab. This where iTunes thinks the file ought to be? Now find out where it actually is. Post back the two locations for comparison. I should be able to give you some steps to reconnect everything once I can determine which of the things that might have gone wrong is most likely in your case.
When you get it all working make a backup!
tt2

What do you do if you rent a movie and can't watch it due to the download speed. Refund from Apple?

Two questions:
1. Is it normal to take 555 minutes to download a movie from Itunes ?
2. I have rented several and can't watch them because of a long download time. What do you do

Test your sustained internet speed at speedtest.net. See what your result is - if you have a very slow connection it's not really Apple's fault but they don't publicise the requirements that well (yes you can find them in footnotes etc but they're not in the main sections of product descriptions).
HD needs 6-8 Mbps for near instant playback. I only get 4 Mbps - it takes 40-45 mins for a film to prebuffer.
Fort SD you'll get away with slower speed of around 3 Mbps.
The problem with the AppleTV 2 is that once a download starts, doing other things with the unit unfortunately often erases the downloaded part so when you go back to see how long it'll take it starts over again.
You can try changing rentals from HD to SD in Settings for iTunes store, but tyhis will not apply to things already rented.
If your speedtest.net result is good, then it may be another issue entirely and you may want to take it up with Apple.
You can also rent some titles in iTunes and then stream them once they're downloaded which allows you to use AppleTV 2 for other things in the interim - they appear on AppleTV 2 under Computers>Your iTunes Name>Rentals. Not all things are available in iTunes though.

How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm? I have the app installed on my iPad and can't get it to play!

How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm? I have the app installed on my iPad and can't get it to play!

I haven't received an answer. I hope someone can answer this because it's an ongoing problem that I can't play some CDs on my MacBook Air (see my original post for the details). Anyone? Please? Thanks in advance!

Want to download itunes 10.6 and not 10.7 because my comp doesn't support yet, where can I download 10.6 still?

want to download itunes 10.6 and not 10.7 because my comp doesn't support yet, where can I download 10.6 still?

iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

If u redeem a movie off of itunes on iphone and can't download it due to lack of space and when i go to computer to find it to download there it is not there what to do?

if u redeem a movie off of itunes on iphone and can't download it due to lack of space and when i go to computer to find it to download there it is not there what to do?

Clear space on your iPhone (go to Settings > General > Usage) and complete the download there.
If you rented the movie on your iPhone, it can only be viewed on your iPhone.

I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf. Can anyone help?

I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf" Can anyone help?

Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down?

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.
And this is the error that comes out:
szAppName : AppleMobileDeviceService.exe szAppVer : 17.88.0.7
szModName : kernel32.dll szModVer : 5.1.2600.5781 offset : 00012afb

http://www.youtube.com/watch?v=be09gGFw-Y4

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Just downloaded itunes 11.1 and when i click on the store its a blank screen

I have just downloaded itunes 11.1 and now when I try to open up the itunes store it just comes up blank with nothing showing. No songs or new albums or anything on the itunes store. I have no idea whats wrong and I have tried closing itunes on my computer and restarting it, but nothing has worked....

If you have 10.6.8, make sure you have Safari version 5.1.10. Can be dowloaded here:
http://support.apple.com/kb/DL1569

I downloaded itunes 10.5 and now my ipod wont sync up with it, whats wrong?

i downloaded itunes 10.5 and ever since then my ipod wont get recognised by itunes, how do i fix this?

This tutorial for downgrading says you have to do this when that notice appears after you've downgraded:
iTunes 10.5 upgrades the iTunes library file and won’t let you downgrade, so you will need the prior version library file. Here’s how to go about that
5) You will need to rename iTunes Library.itl to iTunes Library.bak
6) Go into the “Previous iTunes Libraries” folder where you will find several files with dates in their names. The most recent one will have the .itl extension, but the others don’t. Copy that to the parent folder ~/Music/iTunes/ and rename it iTunes Library.itl
7) Congrats. You’re done.
from http://ismashphone.com/2011/06/how-to-downgrade-itunes-105-beta-to-itunes-103.ht ml
Can you try this and let me know if it works? *please God please GOD*

Downloaded iTunes 11.4 and can't watch movies any more

Similar Messages

Maybe you are looking for