Downloaded Lr 4 but cannot install?

The below screenshot is the error message I receive when I attempt to install the software. I downladed the software again thinking there might have been an issue during the download, but I experience the same problem with the error messsage? I'm based in Asia and have found Adobe support terribly disappointing. I would appreciate any help in resolving this. Thanks!

The installer's certificate is expired (expiry was Dec 15, 2012). Unfortunately, Apple's installer app doesn't tell this very obviously.
Here's what you can do to install the application:
Open "Terminal" app (you can use spotlight to open this)
On the command line, run the command: open -a Installer
Go to the mounted volume of the DMG (its name should appear as "Lightroom 4.0" on the left hand side), and click on the .pkg file within it
It will give you some warnings about certificate. Click "Continue"
Proceed with the rest of the installation
I faced the same issue today, and eventually figured out the root cause and used the above to install. Can't believe Adobe would ship out a software with an expired certificate.

Similar Messages

I can download Lightroom 5, but cannot install it.

It says "Installation failed. The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
So here I am. I am running OSX 10.9.4. Everything is updated. I ran the 'repair disk'.
I actually JUST bought this MacBook Pro today. I was able to download my previously bought Photoshop CS6 and install it (I actually have a physical disc for that), but I am having trouble with Lightroom.

I figured it out.
I copied the Lightroom 5 app from my iMac, onto my Macbook via flash drive. It was instantly installed, and I just had to type in my serial #'s to make it official.

Download installer already but cannot install

I download the Adobe Flash player installer , but i can't install the Adobe Flash player! I open the file, the response is:Only a single instance of this application can run,what does it mean?And what should I do?

Download the offline installer(s)
Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
then restart your computer and run the downloaded installer.

Able to download screen saver but cannot install it tried all f/fox support

I TRIED TO DOWNLOAD A NEW SCREENSAVER . I DOUBLE CLICKED IN THE DOWNLOAD BOX TO SET UP AND THEN I SAVE THE FILE . AFTER THAT A BOX APPEARS AND IT SAYS AT THE TOP " CANNOT RUN IN DOS MODE" AND THAT IS AS FAR AS I CAN GET . I HAVE THE SCREENSAVER IN MY APPLICATIONS BUT I CANNOT DO ANYTHING WITH . I DID EVERYTHING ON THE FIRE SUPPORT SECTION BUT WITHOUT GAIN. PLEASE HELP

duplicate of
https://support.mozilla.com/en-US/questions/753312

I have downloaded browserprotect OK but cannot install browserprotect premium and would like to have a solution please.

It seems to work in part but then an error comes up saying navigation to the page has been cancelled, the page it refers to is microsoft silverlight

What OS are you running there?
Feel free to contact us at [email protected]
--sheldon
[http://www.browserprotect.org http://www.browserprotect.org]

I've downloaded osx lion but cant install, it says cannot verify maybe corrupted or tampered during download. And I try to download again but it can't. No more download menu. It just appear " installed"

I've downloaded osx lion but cant install, it says cannot verify maybe corrupted or tampered during download. And I try to download again but it can't. No more download menu. It just appear " installed"

Can't believe no one tried to help you. If it is saying it's installed, have you tried to reboot while holding CMD and R together? it'll take you to the partition of Lion that has the install information, try re installing your os after verifying the disk in disk utility (also available after hitting cmd R). Instead of a disk, Lion makes a partition in your main HDD/SSD. The idea is you'll never have to boot from your original CD again.

Can download, but cannot install

I have downloaded the latest updates, but cannot install them. I carried out Repair Permissions, and attach the log in the hope that it may reveal what is wrong.https://dl.dropbox.com/u/74429132/RepairDisc.rtf.

Try this:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Now try your updates again to see if the problem is fixed. Now, this same error can pop up in App Store if you are trying to install updates for software that was purchased under a different Apple ID than the one you are logged in with.

HT2311 have downloaded the new iTunes software but cannot install it!

I have downloaded the new Itunes software but cannot install it!

AS I WANT TO INSTALL THE ITUNES IT SAY THIS >>>>
An error occurred during the installation of assembly "microsoft.VC80.CRT.type="win32",version"8.0.507274053".publicKeytoken="1fc8b3b 9a1e18e3b".processorArchitecture="amd64". Please refer to help and support for more information. HRESULT: 0x800736b3
CAN'T U HELP ME RESOLVE THIS..TQ

I have downloaded an app but cannot see the icon

I have downloaded an app but cannot see the icon. I have tried to download again from app store but it says it is installed

Do you have restrictions enabled on the iPad? Settings>General>Restrictions? Maybe that is why you cannot see it. Have you swiped from screen to screen to look for it?
You can search for the app to confirm that it is on the iPad, but that will not show you the location of the icon and if the app store says it is installed - then it is installed. But this would let you access the app. Swipe from the right in your first home screen and the search feature appears. Type in the name of the app to find it. you can tap on the icon to launch the app.
Try restarting the iPad as well and maybe the icon will show up. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
This may even help if all else fails. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

My itunes wont let me download podcast to my ipod, and i have a podcast account for bob and tom, i have them download to itunes but cannot get them to the ipod.

My itunes wont let me download podcast to my ipod, and i have a podcast account for bob and tom, i have them download to itunes but cannot get them to the ipod. I dont know if its my my computer or my ipod.

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

HT1657 Help. Movie downloaded on ipad2 but cannot access. No icon. No nothing. Had okayed 2 movie downloads-could that be a problem. Can not access either. A few months ago had seen a movie with no problem.

Help. Movie downloaded on ipad2 but cannot access. No icon. No nothing. Had okayed 2 movie downloads-could that be a problem? Can not access either. A few months ago had seen a movie with no problem?

My problem to as to how to access downloaded movies not solved.

I have just downloaded itunes. I cannot install QT as an older version is in place. Cannot remove the older version using CP. Any ideas?

I have just downloaded itunes. I cannot install QT as an older version is in place. Cannot remove the older version using CP. Any ideas?

Many thanks.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?
Message was edited by: b noir

I have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it an

i have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it again as error message is
the installation file for this device is missing anecessary entry.this may be because the INF file was written for win95 or later

helhaj,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

Downloaded Lr 4 but cannot install?

Similar Messages

Maybe you are looking for