Downloaded Maverick now Pages in document attachment can't be sent by Gmail because it thinks its a potential security- Whats gives here?

Downloaded Maverick -now Pages in document attachment can't be sent by Gmail because it thinks its a potential security threat- Whats gives here?

I am having the same problem.  Reports of this are all over Google forums but not Apples.  I wonder why??  No response to all these Maverick problems IS a problem!!!

Similar Messages

  • Installed Mavericks, now HP scanner psc 2350 can't save scans

    Installed Mavericks, now HP scanner psc 235 can't save scans

    Cool. This works! Awesome.
    Some difficulty with it at first as the scan size is set to custom 0x0 by default. However, all up and running now.
    This has saved me the cost of a new scanner.

  • Downloaded mavericks, now I cannot log into my computer???

    downloaded mavericks, now I cannot log into my computer???

    I finally figured it out.  I had always been able to login with just my Account Name.  Now I have to use the email address of the account name.  Not sure why that is.  So I just added "@xxxx.com" to the Account Name and now it works.  I don't have an a Mobileme associated with the Account Name.

  • HT201328 Hi. i bought an iphone 4 from china in a local store, before its software version was 4.3.5 now i updated it into ios 6 but my phone in locked now... so how can i unlock this phone? someone told me its a locked phone from at&t.

    Hi. i bought an iphone 4 from china in a local store, before its software version was 4.3.5 now i updated it into ios 6 but my phone in locked now... so how can i unlock this phone? someone told me its a locked phone from at&t.

    Only the carrier can unlock your iPhone.

  • When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its

    When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its acrobat.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found).  What gives?

    Sounds like the file yo are trying to sync to the iPod is corrupted.
    Try syncing only one item that plays in iTunes on the computer.
    Also see the following since when you downgrade iTunes you have to reset your iTunes library since the older version can't read the updated version of the library.

  • I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid".  What does this mean and how do I correct it ?

    I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid".  What does this mean and how do I correct it ?

    There are numerous thread about the same matter in this forum
    I hope you'll find your answer
    https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

  • Just downloaded mavericks, now iPhoto won't load because of an error message that says "You can't open the application "IPhoto" because it is not supported on this type of Mac" . I have a 17" MacBook Pro, mid 2010 model running 2.53 GHz and Intel Core I5,

    I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!

    What version of iPhoto do you have installed?  Is if one of the versions shown as not compatible in this screenshot?
    If it is then go to the App Store and download iPhoto 9.5.  It will be free if you have an iPhoto 9 or later verson currently.
    OT

  • Where Can I Download Mavericks, Now That Yosemite Is Out?

    I want to download and install OS X Mavericks, but since OS X Yosemite came out, Mavericks is no longer available on the Mac App Store.
    Suggestions?

    It seems to me that those of us that want Mavericks will have to work together to get it done. Basically, you have to know someone who has EVER downloaded Mavericks on one of their computers. That person can log on to your computer and let you legally download a copy of Mavericks. Said person would stay log enough for download. What I do not know yet is if that same person would have to be present to log in somehow later once the erase and write to Mavericks was done.  I am one of the unfortunate Apple users who ended up with several log-ins, so I thought I could not go back to Mavericks. I logged in differently and I DO have Mavericks in my purchase history. I will be erasing my computer and reinstalling Mavericks from a thumb drive. I will come back and let you know if it required my log in. If it does not, then it's a matter of those of us who have Mavericks being willing to meet random people in coffee shops near us to help them out. If anyone is in the Oklahoma area, I live in Edmond, OK. I would be willing to meet you and your poor laptop to sign and get you Mavericks (if I don't have to stay past logging out of your app store when download is done).

  • Having downloaded Mavericks now unable to drag and drop contacts into the to column of mail

    After downloading Mavericks I can not drag contacts from my addreass book to the message. I also find that iphoto has been locked out and not able to seek pemissions to enter my photos. Can any one help

    Finally figured it out. Podcasts in your Podcast folder aren't actually there (they're just "available") until you download them by clicking on the down arrow to the right of the name. Once you click on the down arrow the podcast will download to your computer and a blue dot will appear to the left of the name. You should now be able to move the podcast to your other i-devices.

  • I can't open documents attached to e-mails sent me

    When I receive e-mails with an attachment e.g. Microsoft Word or a PDF document, I can't download it and open it.

    Where is the answer to my question?

  • Downloaded maverick now i have plugin failure

    i cant see any videos now that i have downloaded maverick, i get a Plug-in falilure message.   help

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Just bought new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I have my hand on the mouse. I can get back to normal size by clicking "actual size" in View. What gives?

    Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?

    From System Preferences, Mouse, Point & Click, Secondary click.  Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.

  • Got an error message "You can't open the application iMovie because it may be damaged or incomplete"  What do I do next to try to fix?  Thanks.

    I tried accessing imovie after not using it for a long time and got an error message "You can't open the application iMovie because it is damaged or incomplete. I'm not sure how to go about addressing it.  Your suggestions would be very much apprecaited.

    Judging by your OSX, I presume that your iMac would have come with 2 installation discs.
    iMovie and all the iLife software will be on disc 2.
    Run the disc and re-install iMovie.
    After that, do a software update.,
    Best,

  • Paid for downloaded music (not from Itunes store) is not showing up in my library s usual. Neither are imported Cds. what gives?

    Paid for (not from Itunes store) music downloaded not showing up in library as usual. Imported CD also not appearing as usual. What gives?

    I have seen 3 potential solutions in this forum
    1) If you are using iTunes Match Store > Update iTunes Match
    2) Logging out of itunes store and logging in again
    3) Downloading Free single of the week - no idea why this should work but people have reported it does

Maybe you are looking for

  • Unable to fill out shipping address in Aperture

    I am attemping to purchase a book I created in Aperture 3.  I am unable to complete the shipping address form, for the "Country" drop down menu is actually covered by a text box.  This graphic glitch is preventing me from proceeding any further. If I

  • Sorting in the variable screen

    Hello, I use BW 7.0 and have a problem with the variable screen. In the web-report I have three queries with different and same variables. I know that I can adjust the sorting of variables in the query designer. But this has no affect to the sorting

  • Placing a instance from the library and parameters?

    Ok, here is just a general question about the use of classes in flash. Say I have a class called ClassA that wants two parameters passed in. So i create an instance of it and add it to the stage with code like this: var myInstance:ClassA = new ClassA

  • Help regarding mapping

    Hi Guys,   Please see the below message. I done mapping like if multiple rows in the source then it mapped to the correctly. But I faced another problem like there are multiple<Statement_response> which contain mulitple rows, how to achieve this. <b>

  • A tutorial on custom workflow creation?

    I have tried using Apple's documentation to customize a workflow. I took the Blog workflow and took out some of the encodings, didn't need them. I wanted to have the workflow to post to another group. I created four new properties and also changed th