Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

ashg23 wrote:
Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
Have you started up holding down Command + R and attempted to install again?
Pete

Similar Messages

Imac 2008 stuck on grey screen with spinning wheel no discs I lost them

HI, I have a imac 2008 24" someone help please.stuck on grey screen with spinning wheel after 5 minutes mac just restarts again.I have no restore dvds as I borrowed them out and never got them back thanks

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

Hi guys,
since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
-2 weeks ago, i installed smcFanControl app
-Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
-entered Single User Mode and i get an error
SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
-followed some instructions found online, but can execute the correct commands in SingleUserMode
tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
any ideas what may caused this and how can i fix this?
Thanks in advance

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Old iMac won't start up and stuck in grey screen with spinning wheel

Hi, I have a very old imac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago.
Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel.
I tried many times off-on, hold down the apple function key but none worked.
I no longer have the rebooting CD with me. I wonder whether the computer can still be saved?
I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files.
Thanks
If I am not wrong, I think it's tiger or earlier that it's using.

Do you have the Install Disc to try to boot from?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

G4 Won't start. Stuck at Grey Screen with Spinning wheel

It won't make it past this screen.
I have a Dual G4 867Mhz with 2GB ram. (3) harddrives.
Any Help would be greatly appreciated.
Thanks
The last thing that happened was last night I left my computer on downloading some stuff. When I woke up my dad had unplugged the ethernet cable and It had locked up some programs with the spinning beachball. I proceeded by trying to shut the program with apple+q. It shut down the Finder window. I then was forced to just shut down the computer by holding down the power button. I didn't try starting up again at that time, but now about 3 hours later I tried to start up again, and it's stuck at this screen.

Install OS X on one of your disk drives. Or get a FW case and drive, then update to 10.3.9.
Buy a copy of Disk Warrior 4.
Ask Dad.

TS1388 stuck on grey screen with spinning wheel

My computer was stuck on a program and i held the power down button to close it. When I turned back on my macbook pro the only thing I get is a grey screen wioth apple logo and spinning wheel, It stays stuck on this for hours.

Hi Rick,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Stuck on grey screen with spinning wheel

I have a mac mini server running snow leopard server
It has been slow to boot and now wont get past screen
I have reat PRAM and SMU
I have assed an externa, USB drive from which i can boot thge machine
boith drives are acccesible
I install SL on teh second drive as a bootable drive all dives are then accessible
the usb drive and the twi HDs show as startable drives when I boot with option key
I have checked all drives with Disk warrior
I can boot to single user mode
jusyt can't get any of the internal dives to boot
any thoughts where ro go next??

i refirmated all teh drives and started over three months later one of the two drives died completely.. M

My MacBook is stuck on grey screen with rotating circle

My MacBook is stuck on grey screen with rotating circle

See this Apple note on dealing with that. If you have OS X 10.8 Mountain Lion, this is the equivalent note, howver, it's not as detailed.

My imac is stuck in gray screen with spinning wheel

My iMac is stuck in gray screen with spinning wheel. I'm running Mountain Lion, any idea how to fix it. Pls help.Thx.

Welcome to Apple Support Communities
Press Shift key on boot and check that the computer starts. Finally, restart

Phone Stuck on blach screen with Spinning Wheel

Iphone 3G stuck on black screen with spinning wheel and unable to hard reset plug or unplug with PC.
I tried holding both home/off for 10 sec, 20 sec, 2 min nothing.... Itunes can't read my iphone and nothing happen to the phone....
I saw somewhere to wait for a flash pf the apple logo on screen every 10 min and reboot but after looking at the screen for 30 min non stop, no apple logo....
Please help because I don't want to change my iphone right now because i'm waiting for the iphone 5....

i refirmated all teh drives and started over three months later one of the two drives died completely.. M

Macbook air Lion stuck at grey screen and spinning wheel

HI
I have a Macbook air with Lion installed. I pressed the On button, but it gets stuck at grey screen, apple logo and spining wheel. I then managed to get it to startup in Safe Mode.
How can I find out what the problem was?
Please could you let me know if there are some simple steps to fix this?
Thank you in advance.

Please carefully read Gray screen appears during startup, Apple will tell you how to trouble shoot the issue. I suspect your HD has crashed, not a big deal if you have been backing up. However if you haven't then you're probably about to learn a lesson on why backup is critical.

Macbook Pro stuck on grey screen with Apple logo

Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X. Any suggestions on what to do?

Create a data recovery, undelete boot drive
dustysjuls wrote:
Will that erase all of the files on my hard drive? Or will it just erase and reinstall the operating system? I do not have my files backed up.
A #18 Reinstall Just OS X, details here:
Step by Step to fix your Mac

Has anyone encounter a Grey Screen with spinning wheel stuck (frozen waited more than 5h) in after running Lion Installer from SL?

Hi
I've tried almost everything on my Macbook Pro 8,2 (i7 2.0Ghz).
Wipe/Erase the SL partition.
Burned the ESD dmg to a DVD.
Reset SMC,PRAM and NVRAM many times.
Run Repair Disk. Passed OK.
Run Hardware Test. Passed OK.
Download the Lion Installer 4 times. MD5 Passed.
Everytime I've tried to install lion it give me this Grey screen... The mouse wheel start spinning and it then stops, and nothing happens from that point. (Also rebooted many, many times same result).
SL Install disk runs fine, even installing it from Zero. I've setted up time machine. (The restore to definetly works also the SL installation too)
I'm a little far away to send my Macbook to a customer service.
What else should I try?
:S
VR

Thank you very much William
I ran the installer and saw the same screen stuck... After I used Shift to boot in safe mode, I got the 3 beeps with grey screen apple logo. So then I rebooted into Single User do the 'nvram boot-args="-x -v"' and voila the installer continued with no issues I've turned back de 'nvram boot-args=""' and everything seems to be working fine.
Really weird beahviour of the installer with my Mac.
Thanks.

Grey Screen with Spinning Wheel Stuck!?!?!?

Ok so I updated to Lion 10.7.3 using the combo pack, I restarted my mac and it goes through the usual chime, apple logo. But after that it goes back to the apple logo, the app logo dissapears and what is left is a spinning circle with a grey screen. I can boot into safe mode but otherwise i am stuck. I have also reset the PRAM. PLEASE HELP!!!!

I'd try an Apple Hardware Test - that can be found here - http://support.apple.com/kb/PH4510.
Clinton

IMac does not boot up, gets stuck on blue screen with spinning wheel ...

... and tries to do something in a 10 second circle ... blue screen ... spinning wheel b/w on blue screen ... blue screen ... spinning wheel again ...
... with some hard disc work going on ...
i habe checked the disk with the disc utility, no errors.
any idea what I could do apart from reinstalling the os?
thanks for your help!
j.

Hi J
Welcome to Apple Discussions
That sounds almost like a failed Leopard install:
http://support.apple.com/kb/TS1545?viewlocale=en_US
or it's Stuck in a "loop" at the login window after upgrading to Leopard: http://support.apple.com/kb/TS1413?viewlocale=en_US
Try an Archive & Install:
http://support.apple.com/kb/HT1710
or restore from your Time Machine Backup:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
Dennis

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

Similar Messages

Maybe you are looking for