Downloaded Podcast RSS Episode does not stay in the original RSS feed.

Hello,
I just upgraded to iTunes ver. 9 on a windows XP PC. Before the upgrade my podcasts would download into the original RSS podcast feed created when I entered the initial URL. Since the update every time the new podcast’s is downloaded they dissapear from the original RSS feed and become an episode all alone within the podcast window. I want them to stay within the feed like before. I have spent hours trying to make changes under the info to try to make the podcast stay inside the original podcast folder with no luck. Before this upgrade the podcast downloads worked exactly the way I wanted them to, but since the upgrade I find it difficult to manage my selections. Is this a bug or is there some way to make the podcast group the way they used to? Any help would be appreciated. I am a new iTunes user who plans to move to the iphone in December so the configuration of iTunes is critical to this decision as I plan to synchronize my selections.
Thanks for any help you may provide!

i have the exact same problem... already made a post about it as well. please keep me posted if you find anything, ill do the same.

Similar Messages

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place. Help

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place it moves to the right and is max out which makes every clip that I bring to the timeline expanded.

What format etc. are the video clips and what were they shot on?
Before you do anything else, trash the preferences with this free app:-
http://www.digitalrebellion.com/prefman/

Why is my downloaded Lightroom CC (2015) does not start? The download is successful otherwise okay. The shortcut appears on the desktop etc. But the program does not start.

Why is my downloaded Lightroom CC (2015) does not start? The download is successful otherwise okay. The shortcut appears on the desktop etc. But the program does not start.

Thank you help ! [?]
2015-04-29 19:58 GMT+02:00 kglad <[email protected]>:
Why is my downloaded Lightroom CC (2015) does not start? The download
is successful otherwise okay. The shortcut appears on the desktop etc. But
the program does not start. created by kglad
<https://forums.adobe.com/people/kglad> in *Creative Cloud Download &
Install* - View the full discussion
<https://forums.adobe.com/message/7495290#7495290>

AppleWorks Icon does not stay in the same position after saving

After I installed AppleWorks 6.2.8, each time I save the file (word prosessor or data base) the icon on the desktop always moves to the right side of the screen below the hard drive icons. If I drag it to different position, then save the file it will move to the right side of the screen. If the saved file is in a folder, it always goes back to it's origional position. In fact, the same thing happens to other applactions (PhotoShop, TurboCad, etc.). This only happens in OS 9.2.2. It does not happen in OSX 10.4.6. The same situation also happens on my iBook and PowerMac G4 MDD after installing AppleWorks 6.2.8.
My System: PowerMac 7300, Sonnet 1GHz G4, 1GB memory, OS 9.2.2, OSX 10.4.6
I checked the AppleWorks preferences and Control Panels and could not find any settings.
This does not happen with AppleWorks 5.
Anyone know what has happened? Are there settings I am missing?
Much Thanks,
Gene
Mac OS 9.2.x

Hello
If I remember well, AppleWorks 5 was saving one document by rewriting the old one. Doing that, all the file's attributes where kept.
AppleWorks 6 writes an entirely new file, so the icon is not preserved. Of course, some of us think that it would have been a good idea to keep the parameters of the old file and "paste" them to the new one.
I wrote a script doing that but it is not perfecly stable.
For my own use, I build an alias of every file to which I want to give an icon. The file itself doesn't keep the icon (and its position in the window) but the alias keep it.
If you are really bothered by the standard icon, create a subfolder in which you store the documents and use these two scripts.
--[SCRIPT hideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & "masqué") to ".masqué"
end try
--[/SCRIPT]
--[SCRIPT unHideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & ".masqué") to "masqué"
end try
--[/SCRIPT]
You will see the aliases with their icon and the true file will be safe in the hidden subFolder.
Yvan KOENIG (from FRANCE dimanche 10 septembre 2006 20:44:29)

MY CURSOR DOES NOT STAY AT THE END OF WHAT I TYPE IT DEFAULTS TO THE BEGINGING OF WHAT I TYPED

THE CURSOR USED TO STAY AT THE END OF WHAT EVER I TYPED IF I HAD TO CLICK ON A LINK AND THEN GO BACK IT WOULD ALWAYS BE THERE AT THE END NOW IT STAYS AT THE FRONT HOW DO I CHANGE THIS SO THAT THE CURSOR STAYS WHERE I NEED IT TO BE THE END OF WHAT EVER IS TYPED IN A FIELD?

No, they seem to have changed that behavior a few times.<br />
In some versions you go to the end of the text and apparently now to the begin of the text.
If you have problems with reading or writing lowercase text then you can use an extension to set a default font size and page zoom on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Shape does not stay on the same page

How do I get shapes to stay where I put them? Specifically:
1) How can I draw *circles around words* and make them STAY around those words, even when I add text and page-breaks above those words?
2) How can I draw *arrows ON my pictures* and make them STAY on my pictures, even when I add text and page-breaks above those pictures?
My dilemma is that "+moves with text+" ensures that they stay in the same place, even when I add text or page-breaks above the circles and arrows, BUT the circles and arrows are treated as text and I can't place them AROUND/ON my words and pictures.
The only other setting, "+fixed on page - no object wrap+" lets me place circles and arrows to be AROUND/ON my words and pictures (instead of beside), but they don't move WITH my text and pictures.
ARGH!!!!
Any help is greatly appreciated!!!!!

{quote:title=Brie Fly wrote:}
Many (including Pages™) will let you add circles and pointers in a meaningful way, but only after your words have been substantially processed.
What do you mean by "substantially processed"?
And the feature I'm describing (having a shape linked to text so that it moves with the text) is a feature I have used in MS Word. In their terms, you "anchor" your shape to a spot in the text. When that spot in the text is moved, the anchored shape moves with it.
Thanks for the input though, Brie.

My source file does not stay in the same order when imported to Target

Hi Gurus,
I am importing a file using the LKM to SQL to a target datastore on Oracle. I am using the IKM SQL Control Append but my problem is in my target datastore the order that the flat file is in is not longer together. I added a ROWNUM column and triggered a sequence but the order from the flat file is still not the same as the table. I need the order to remain the same b/c during the load to Planning it holds the metadata order correctly.
Could someone give me a suggestion.
Thanks
Mike

Are you using the Planning Metadata load KM. If so there is an option on that KM Called Load by Input Order which repsects the order of your data in the source when loading to Planning

I have attempted to download ML but it does not install. The App store confirms I have paid for it, and while I have clicked yes to redownload, I am unable to find the file and it has not loaded automatically. Any help

I have been asked several times if I want to redownload ML and answered yes, but nothing appears to happen and nothing installs. Somewhat surprisingly my internet service provider howevere has infrmed me I have exceeded my download limt today ( which suggests I have downloaded multiple copies of ML file, but I cannot find any evidence on my hard drive of where it has gone. Help appreciated.
I am attempting to install ML on a 2009 Macbook pro, core2 duo, with 8mb RAM. I am currently running Lion 10.7.5.

Thanks
Problem resolved itself. Turned out that I had ben unable to contact the App store to confirm purchase. Once this resolved itself program downloaded properly and installation went without a hitch.
Thanks again

WVC210 with Motion Detection does not stay in the correct position

When I set the camera in a specific position (setting it as Home) and then I enable Motion Detection feature (setting area and sensibility using the home position); if i have set the "Disable Motion Detection while position is incorrect" with "Go to Motion Detection position if idle" option the camera will reset the tilt after the time set has expired.
Is it a known bug (I have not found anything about that here)?
Is there a way to set which is the motion detection position to be held?

Hi M.Bordoni,
I will pass this onto the wonderful folks at the Small Business Support Center to get their opinion.
Just out of interest, I'm guessing you are utilities built within the camera to send a image somewhere ?
Are you using the free Surveillance monitoring application to store captured video on your NAS/PC or server ?
regards Dave

Changing .include structure does not reflect in the original Table.

Hi Experts,
I have a .include structure by name SDOKLO_INC referenced for table SRMTST07.
As a part of unicode conversion, I have to Uncheck the Text Lang check box of Datalement SDOK_MSLAN. Hence I opened the structure of SDOKLO_INC and did the changes.
As the structure is included in the table SRMTST07, it should reflect in the table also.
But that is not getting reflected.
Even I have properly activated using SE14 --> Adjust and Activate Table.
Could you please throw some light..
Thanks & Best Regards
LRaghunahth

Hi,
This seems strange.
As data element is activated, it should be reflected whereever it has been referenced.
Can you please double check whether the data element is active with latest changes?

Edits to a JPG Smart Object in a layered TIFF file: DOES NOT Save to the originally placed file?

When placing a JPG as a Smart Object (and even multiples) into a layered TIFF file: If I open each layered Smart Object JPG, make changes as a JPG and SAVE the file, I expect the ORIGINAL SOURCE JPG file that was placed to also be saved- I thought that is the file I was editing!
This SUCKS! To capture my edits to the original individual files: I now have to open each layed TIF file, Edit each smart object JPG and SAVE AS to overwrite the original and capture my changes? Is this the way its always been- I don't think it has. How can I edit a Smart Object file in a layered document and ALSO update the SOURCE file?

You should edit the original jpg, and then replace the smart object. There is a utility that makes this easier, if you do many of these. Looks liek this
link_update.zip

The sequence does not match with the original clip

What I have learned about how to effectively match the sequence with original clip is by dragging the imported clip into the new item button, or right click the clip and click on "New Sequence from Clip" button. I did it exactly, however, like you can see in the image I attached, there is a black space under the clip on the sequence and the general quality of video and audio are worse than the original. Why is this happening? Please help.

Is this what you are asking about?

Control does not stay in case structure while using motion VIs

Hi,
I have a motion control card PCI 7344 connected to my PC. I am able to control the motor at the required speed till the required position using an encoder. Now I have put my motion control VIs in a case structure in such a way that, if Case1 is selected then the motor should to position P at speed S, if case 2 is selected then the motor should move to position Q at speed S and if case3 is selected then the motor should to position R at speed S. I am selecting cases 1,2,3 etc. by scanning a set of numbers seperated by spaces which look like this,
1 2 5 7 3
This number scanning is done using a while loop. Now, when the first number is scanned in the above set of numbers. The number 1 is obtained and the control is switched to case1. But before the motor reaches position P, the control switches to case2 and before completing the execution, the program scans case5 and so on. That means that the control does not stay till the move in the case 1 is completed. I'm sure there must be a way to retain the control to a case and stop the next number to be scanned before the functions in the particular are completely executed. I thought of one method, i.e. by using the move complete VI provided in LabVIEW, but I could not implement it. Please help me out with this.
Regards,
Giridhar Rajan
Automation Engineer,
Cruiser Controls,
Mumbai, India

Hi,
Our motion controllers allow you to preemptively start a move in the middle of a current move. For example if you are moving from point A to B and based on some logic, you determine you need to immediately start moving to point C. A preemptive move allows you to just load the new target position and call start. You do NOT have to first stop the current move and then start the new move.
In your case, you want the first move to complete before the second move starts. There are two ways to handle this. First, wait for the move to complete via a Wait For Move Complete function/VI call, or use the Check For Move Complete function/VI in a loop. Second, use Blend Start instead of the regular start. A Blend Start (if blend factor is set to 0) waits for the first move to complete before the second move starts.
Check out the help topics for Start Motion and Blend Motion to learn more.
Thanks,
Rodger S.

I am trying to submit the link to the podcast RSS feed but when I press submit I receive the error "We care currently experiencing technical difficulties. Please try again later." I am not sure what I am doing wrong.

I am trying to submit the link to the podcast RSS feed but when I press submit I receive the error "We care currently experiencing technical difficulties. Please try again later." I am not sure what I am doing wrong.

I am using http://www.greater-light.org/channel.php?id=3344. I have been trying over a month and I am receiving the same error.
I am on Windows 7.
Version iTunes 11.1.4.62.

TS2313 Recently downloaded the new podcast app, but does not play offline. Can anyone help.

Recently downloaded the new podcast app, but does not play offline. Can anyone help? Thank you.

Hey Karenfromanamosa,
I fixed this problem by turning off the ipad and then turning it back on after 5-10 minutes.
Hopefully then when you play a video it will start playing.

Downloaded Podcast RSS Episode does not stay in the original RSS feed.

Similar Messages

Maybe you are looking for