Downloaded Software Won't Start at Boot

I have downloaded and installed the ClamXav application and ClamXav Sentry. However, each time I boot, I receive a message that each program has been downloaded to the computer on a certain date and would I like to open it. My question is, why won't each program load automatically at log in? I have placed both items in my Login list in my Accounts Preferences.
ACP

Alan Pease wrote:
Thanks for the suggestion, V.K. I have now installed the apps in the Admin account as well as my user account.
what do you mean by that? the application should be installed only once for the whole computer. you have to launch it once from an admin account and it will stop bugging you. did you do that?

Similar Messages

Upgraded desktop software won't start

In a moment of complete insanity I allowed my desktop software to be updated - last time I did this I couldn't sync for over a month.
Naturally the install didn't do smoothly and now the software won't start.....
The processes start, and I can kill them in windows task manager, but the software crashes - I get the 'program has stopped working' message - before it even finishes starting.
Since all my email and calendar applications are web based I shouldn't need to sync at all, my Android tablet doesn't need to, I just point it at my online calendar and hey presto! it's all synced.

I have the exact same issue. Have already tried reinstalling (repairing) by downloading from website to no avail. Can someone help please?

IMac Won't Start Up/Boot

My iMac won't start up. I've tried holding all kinds of key combinations while I turn it on, but it doesn't even get that far. It gets stuck on a folder with the Apple picture alternating with a question mark. It doesn't do anything else for a while, and then the fan turns on (???).

This is indicative of a corrupted system or drive. The first thing to try is:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't solve the problem then you will have to reinstall OS X. If the drive tests out OK per the above then you can reinstall without erasing the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

[SOLVED - partly] Minidlna won't start on boot, but OK otherwise

I am using an up-to-date system as of 2012-11-13. The problem is that minidlna fails to start on boot:
minidlna.service - minidlna server
Loaded: loaded (/usr/lib/systemd/system/minidlna.service; enabled)
Active: failed (Result: exit-code) since Tue, 2012-11-13 07:53:55 CET; 1h 33min ago
Process: 401 ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid (code=exited, status=255)
CGroup: name=systemd:/system/minidlna.service
Nov 13 07:53:59 earth minidlna[401]: [2012/11/13 07:53:54] minidlna.c:754: fatal: No IP address automatically detected!
So I guess it has to do something with the network, I am using DHCP, with systemd + net-auto-wired.service.
I have found this: https://ask.fedoraproject.org/question/ … r-dhcp-has
They have solved the problem by changing the after part in the unit by adding: dbus-org.freedesktop.NetworkManager.target
Since I do not use networkmanager, this is not an option for me. The current, unmanipulated state of the minidlna unit is:
[Unit]
Description=minidlna server
After=network.target
[Service]
Type=forking
User=nobody
ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid
PIDFile=/var/run/minidlna/minidlna.pid
[Install]
WantedBy=multi-user.target
What I have noticed is that it refers to a network.target in the after section, but it seems to me that I don't have one.
I only have:
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
12 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Edit: having run the command again with the --all prefix:
Notice: network.target loaded inactive dead Network
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded inactive dead Network
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs.target loaded active active Remote File Systems
rescue.target loaded inactive dead Rescue Mode
shutdown.target loaded inactive dead Shutdown
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded inactive dead Syslog
umount.target loaded inactive dead Unmount All Filesystems
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
21 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.
My question is what should I add to the after part to make minidlna work upon booting? Wouldn't a graphical.target be an overkill?
Thanks in advance.
Last edited by szebenyib (2012-12-02 16:45:26)

szebenyib wrote:(However I cannot access the internet that way, maybe because of a bad network file. Honestly I have some space to improve my network knowledge.)
In the case of the possible bad network file. here is what it expects. First, you need to know the router's IP address. In the following I will assume 192.168.0.1 for the router's IP address.
192.168.0.1 is common for D-Link routers, but it does vary by router manufacturer and model. I believe 192.168.1.1 is common for Linksys.
/etc/conf.d/network
interface=eth0 # ethernet port to activate, usually eth0
address=192.168.0.110 # IP address you want the minidlna computer to have. the first 3 triads must be the same as the router's IP addr in this case 192.168.0 the fourth triad can be from 5 to 250
netmask=24
broadcast=192.168.0.255 # the first 3 triads must be the same as the router's IP address and the fourth triad should be 255
gateway=192.168.0.1 # the IP address of your router
In a terminal window, enter:
systemctl restart network.service
ping -c5 127.0.0.1
which is localhost. The -c5 means ping 5 times then quit. If you get: 5 packets transmitted, 5 received, 0% packet loss then the ping was successful, which means
that the ethernet port (usually eth0) is active. If this ping is not successful, go back and check the syntax and spelling in both /etc/conf.d/network and /etc/systemd/system/network.service
If the ping is successful:
ping -c5 192.168.0.1
and ping the router.
If you cannot ping the router's IP address, then there is still something wrong in one of the two involved files. or the router's settings need to be changed.
If you can ping the router's IP address successfully and still cannot get to the internet, you probably have DNS server issues.
ping -c5 google.com
ping -c5 8.8.8.8
If you cannot ping google.com but can ping 8.8.8.8 then you have DNS problems, see Arch WIKI resolv.conf
My network is a mixture of DHCP and STATIC IP addresses. In my router, I have the DHCP server enabled to give IP addresses between 192.168.0.10 and 192.168.0.60
this gives the router 50 DHCP addresses to work with which is more that enough for my home network. The rest of the addresses between 192.168.0.61 and 192.168.0.250
can be used as static addresses. Just an example, this can be changed as necessary.
HTH
Pudge

Openntpd won't start at boot [SOLVED]

Hi all!
My system clock is perpetually off by 4 hours, and I've narrowed it down to an issue with Openntpd; it seems to be refusing to start at boot time. Here are the relevant lines from daemon.log:
Sep 1 21:30:26 raskolnikov ntpd[1440]: Terminating
and the output of ps aux | grep ntpd:
[raskolnikov@raskolnikov ~]$ ps aux | grep ntpd
ntp 1323 0.0 0.0 3184 700 ? S 17:32 0:00 /usr/sbin/ntpd -s
root 1332 0.0 0.0 3292 256 ? Ss 17:32 0:00 /usr/sbin/ntpd -s
1000 1412 0.0 0.0 3616 800 pts/0 S+ 17:33 0:00 grep ntp
I can manually restart the daemon via /etc/rc.d/openntpd restart, which works fine, and the time is set correctly. However, when I reboot, the adjustments are wiped out, and the daemon does not start again (same message in daemon.log). I have the default ntpd.conf. I have found very little helpful information on Google, I would greatly appreciate it if someone could point me in the right direction, I've wasted quite a few hours this evening working on this problem! Thanks!
Edit: Just in case it's helpful, here is my daemons array from rc.conf:
DAEMONS=(syslog-ng !network acpid eee hal networkmanager netfs crond openntpd bitlbee)
Last edited by happycodemonkey (2009-09-02 03:55:46)

I've had this problem too, although I do not use networkmanager. I've found that openntpd fails to configure itself properly if the network is not up when it starts (in my case this happens when I background the network daemon and start openntpd in the daemons array).
My current working solution* is to add this line to rc.local:
(sleep 300 && /etc/rc.d/openntpd start) &
That will wait 5 minutes before starting the openntpd daemon which gives the network more than sufficient time to start. An alternative would be run "/etc/rc.d/openntpd restart" in an hourly cronjob if your network settings change often.
* Why not just unbackground the network daemon you ask? If the network isn't up then it takes a while to timeout and I don't want to wait to boot in that case.
Last edited by Xyne (2009-09-02 02:05:52)

Download Assitant won't start downloading trial

The download assitant doesn't start downloading and installing the trail for Adobe Premiere Pro CS5.5. Even when I have logged in it doesn't strt downloading.

Which location did you choose to download the install files too?

Firefox won't start on boot

I have a sporadic, but consistent problem with Firefox. Shortly after booting the computer, I try to launch Firefox, but it doesn't start. I open the task manager and can see firefox.exe running under the Processes tab. I will be patient, having waited for other things that might be monopolizing the memory (such as a startup AV scan) to finish. A couple of times, I waited as long as ten minutes, but the Firefox window never opened. My only solution is to reboot the computer. At that point I get several error messages:
"DDE Window Server not responding / End Program?"
and
"Acrodist.exe not responding / End Program?"
and then "Firefox is not responding / End Program?"
I did research on DDE Server Window and found that I could disable it in Windows Services - which I did. Yet, the error message still appears.
Running Windows XP with SP3.
Thanks for any help!

Hello gabryant, sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
also, delete in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] the [http://kb.mozillazine.org/User.js_file User.js] file you already have(except if you created).
The user.js file does not exist by default. If you create the file, forget it, if you have not create the file then delete the User.js file, to see if the problem goes away (some programs create and write in the file also).
thank you

Driver software won't start

New Hp laptop w/Win8.1-64 bit software. Tried download drivers (full) for Photosmart C4385 printer but, when click on software file,,it extracts and after a few mins, get a Runtime error message the Setup.exe file, stating that "runtime is asking program to terminate inn unusual way."
I have re-installed the old software for Win7-32bit many many times because it seemed to just disappear. I cannot even get the software to start now. I have tried many techniques, troubleshootig tips, wizards, etc without luck. So, any suggestions to get me past this roadblock? Thanks Robert

Hello @Indyguy25 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand you're running into driver issues. I would like to help!
I would recommend following the steps in this thread on Error message Microsoft visual c++ runtime library, by SuperMario1.
Please let me know how it goes. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Another nb question: network won't start at boot

I am running Arch 0.5 in a notebook with a 3c574 pmcia card (3com). I've set everything up (gateway, dns, etc) and installed cardmgr... when i load it and type "/etc/rc.d/network start" everything works fine.. the problem is that the network is not loading at boot, i have to start it manually every time the system is restarted (already tried adding network start to rc.local). The DAEMON array is like that:
DAEMON=(pcmcia network crond inetd)
Can i get it work by itself?
Ps: sorry about any gramatical errors, english is not my primary language

i've tried a workaround like that... made a rc script with "/etc/rc.d/network start" and added it before "network" in the daemons array... it worked, but i still get the loading errors. Look at the last lines of my boot sequence (i had to write it by hand heheh):
[ Starting PCMCIA Services BUSY ]
/sbin/ifconfig eth0 down
cardmgr[111]: watching 2 sockets
DONE ]
[ Starting Network BUSY ]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: Cannot assign requested address
FAILED ]
[ Starting Network DONE ]
[ Starting Cron Daemon DONE ]
[ Starting inetd DONE ]
DAEMON=(pcmcia crond [maybe something else here] network inetd)
i'll try that too hehe, thanks

Itunes download mac won't start

I have a newer macbook pro. I need to update my ITunes to the latest version 11.1. When I go to the website it seems to function well, and it sends me to the Thankyou screen, but the download never happens. This should be simple but it just won't work.

Hi WVhillbilly,
If you are having issues with downloading iTunes, you may want to try the following link and see if the issue persists:
iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden

Mac Book Pro (2012, 15 inch and up to date on software won't start up normally.

I was Playing League of Legends on my 2012 Mac book pro (the most recent one) I switched desktops and began to work on an adobe after effects project, after I decided to play league of legends (LoL) again. I forgot it was on another desktop so I tried to open the application, it told me, "this application is already open, would you like to close the other one and open this one?" I accepted. After 3 minutes of waiting no screen came up but on the top left hand side of the screen LoL still appeared, I pressed Command+Q and nothing happened, my Mac froze. I proceeded to use the most common and apparently useless technique of holding down the power button and rebooting the Mac. Upon rebooting, this bar kept on filling up and after it finished, a loading thing rotated below the apple logo for a while, later the Apple logo left and the thing kept spinning. After 2 minutes of this I used my iPhone to look up solutions, I reset NRAM and PRAM, failed. I tried pressing Command+R during boot. My Mac asked me what language I wanted to use... **** no I don't want to wipe my Mac (I haven't backed it up in ages and I don't want to loose my stuff) Do I have to reset my Mac or is there an easier way? I have already called customer support and some guy told me to buy software support... It was $99... No thx Should I take my laptop in to the store?

Get an external drive and reinstall OS X on that then boot the system from that external drive and copy your files over from the internal drive to the external. Then Format and reinstall everything on you internal drive.

ITunes downloaded applications won't start on my iphone

Hi there, I have updated my iphone to the new version of 3.1.2 and I have noticed that any applications downloaded from itunes, whether it was through my pc or the iphone, do not start on my device. are there any suggestions on what I should do?

Have you rebooted your device by holding the power button and swiping the top red slider to shut down first?
I've seen small instances of that where the app crashes cause this...
Otherwise, I'd suggest that you go back into iTunes and do a re-restore process on the phone again... Somehow something didn't occur accurately if the reboot doesn't help.

Win Xp BB Desktop Software won't Start

Hello
on My Dell Notebook Latidue 5430 I had installed Blackberry Desktop Software 7.1.
If i try to start the software i see for a short time the Startscreen the the Software close without any error.
In the Systemlogs i see a "NET Runtime 2.0 Error Reporting 5000" Error
I Altough reinstalled the software, but this have no effects on the error
Whats going wrong?
Thanks
Joerg

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Also, please be certain that you meet 100% of the system requirements listed on this page, especially given you are using an old Windows OS:
http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MBP won't start or boot up

Hi all, new to the mac world but learning alot! I have owned my Pro for 8 months now and work 50% of time in Thailand. This recent trip, my MBP simply stopped booting up. It starts fine with the normal start chime, noise from CD drive, then white screen with apple logo and spinning wheel. That's as far as it gets. I started using command s for single user and did a repair of the HD. This worked, I then rebooted using start up disk and pressing C. Still not starting, stopping at logo and spinning wheel. I then went to command v and watched for hang up. It seems to stop and repeat trying to access (com.apple.mDNSResponder [311]: posix_spawnp("/usr/sbin/mNDSResponder", ... No such file or directory.
I am at a loss as to what this is and how to get past this. I do remember that the last time I was on the machine, 3 days ago, I changed the permission of the hard drive for guests to read only. I am wondering if this is the problem. When I started in single mode, the root is read only. How can I change this if I need to? I am far from any mac repair facility and am 4 weeks from going back to Vancouver, soooo, I am hoping someone out there can assist me. I don't mind typing commands in at the root, I just don't know the language. I am working from a borrowed Toshiba for the time being, but I am missing my mac. Long and short of it is if I have to reformat, I don't mind, I have my install disks with me. Thanks

Okay, so no whiz kids have read this post yet. I got a little further by getting the cd drive to boot in single user, however it too stopped at a unable to read and write to someplace, this may be RAM problems, will try booting from one and the other RAM set independently, more to follow.

Won't Start after boot

Alright after I type in my password my background shows and so does my mouse clicker. I can move the clicker around,raise volume,etc the problem is that my menu bar in the bottom and my top bar never show except for the search button on the top right of the screen. Only that when I try to click on it, the mouse tells me that it is loading, what is the problem? I thought it would take a it a while to load, but doing that hasn't helped either.
This barely happened this morning after downloading the new itunes and quicktime updates and after restarting my computer, I don't want to lose all my files since I'm starting to think resetting the computer is the only way I'm going to be able to fix it.
Anybody please help!

Alright after I type in my password my background shows and so does my mouse clicker. I can move the clicker around,raise volume,etc the problem is that my menu bar in the bottom and my top bar never show except for the search button on the top right of the screen. Only that when I try to click on it, the mouse tells me that it is loading, what is the problem? I thought it would take a it a while to load, but doing that hasn't helped either.
This barely happened this morning after downloading the new itunes and quicktime updates and after restarting my computer, I don't want to lose all my files since I'm starting to think resetting the computer is the only way I'm going to be able to fix it.
Anybody please help!

Downloaded Software Won't Start at Boot

Similar Messages

Maybe you are looking for