Downloaded song ends half way through. can any one help me?

I recently downloaded the album Archangel by Two Steps From **** and the sixteenth song on it, mountains from water, ends at 1:16. the song is supposed to be 2:14. I went on to you tube and all of the copies there were 2:14 give or take ten seconds .What is wrong? How do I fix this? Will itunes give me a working copy? this problem persists on my iphone and my computer.

fridashabayek wrote:
I tried to click on the escape button but the phone auto. turn the light and starts rebooting and again stop at 75 % what i should i do ?
Hi and Welcome to the Community!
You need to keep trying...it can be quite tricky indeed to get the sequence just right.
If you cannot succeed, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Some songs end half way through

I have an 80 GB iPod. I bought it new and originally formatted it for Windows and connected it to iTunes in Windows. I later bought a Mac, reformatted the iPod for Mac and had iTunes copy all my song files to it again. Most of my music collection are MP3 files that I personally ripped from CDs, using a few different programs and encoders.
The problem I am going to describe has occurred on the iPod under both formats, and over multiple iTunes updates.
There are some songs on my iPod that it will not play to the end. What happens is that about half way through the song, the song stops, and the screen indicates the song is paused with two (2) seconds remaining. It ALWAYS says two seconds remaining, regardless of how much time was actually left in the song. I can use the next song button to get to the next song, although it takes a few seconds longer than normal for the iPod to start playing again.
There are only a handful of songs I've identified so far that this happens with. For any song that this happens with, it ALWAYS happens; in other words, it's not that the song sometimes plays through and sometimes doesn't; if it happens at all, it always happens.
The particular songs that I've identified so far play fine in iTunes on the Mac. Back when I used Windows, I noted that the problem songs from the iPod would play fine in Windows iTunes or in other Windows media players.
So far, I have only thought of two solutions to this problem. The first was to uncheck the song and sync the iPod so as to remove the song from the iPod, then recheck it and sync again, so as to recopy the song to the iPod. This did not help. I even tried unchecking, syncing, checking some other songs and syncing, then rechecking the problem song and syncing again, so as to ensure that the song file got copied to a different physical area on the iPod's hard drive, but to no avail; the song still would not finish.
My second solution was to re-rip the song from the CD, replace the file in the iTunes library, and resync the song to the iPod. This worked. So of course it seems that I should just do this, but it's inconvenient for several reasons. One is that I have a lot of my CDs stored away, or no longer have access to many CDs I've ripped from because they belonged to friends or family members. Also, this is really just brute-forcing the problem; it isn't really fixing anything.
Has anyone ever had a similar problem, and if so, did you come up with any other fixes or do you have any other suggestions?

Yes, in theory re-converting would lessen the quality further. However, I have heard people claim (unsubstantiated) that if you are encoding with the same encoder at the same bit rate, then since it will use the same algorthymn, it won't really change the file. I have absolutely no idea if that is true or not.
But... I figure some slight loss in quality re-encoding is still better quality than a song that only plays half way and then stops, right? I suppose you could always tag those files in the comment section with something like "Re-Encoded" and then later if you gain access to your old CDs, you can then make a Smart Playlist to gather those songs and then re-rip them again from your CDs.
Cheers,
Patrick

I am having severe difficulties downloading iTunes..... can any one help. OS windows 7

I am having severe difficulties in downloading itunes..... can any help. Working on windows 7, and just keep getting various error messages. Have uninstalled and tried reinstalling but still no luck

Check if the "Windows Modules Installer" service is started. If not, try to start it from the services console. If you receive an error "1450 Insufficient System resources" error, then follow this steps:
1) Open regedit and replace the following value:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
Key: RegistrySizeLimit
Type: REG_DWORD
Value: 0xFFFFFF (4294967295)
2) Reboot
3) Open a command prompt as administrator and run SFC /SCANNOW to check the integrity of system modules.
4) Install pending windows updates
I hope it fixes your problem

How do you download songs from american idle? can any one tell me

how do you download songs from american idle

According to the website you have to download the application/software to your PC first. However, why not just down the music to your PC, import it into iTunes, and then sync it over to your iPod Nano?
B-rock

HT201272 songs quit half way through playing and next song begins

I just downloaded an album and each song quits half-way through and the next song begins playing on pc computer

Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

HI, I downloaded and used illustrator last night, but today it crashes on opening? can any one help?

I downloaded and used illustrator last night, but today it crashes on opening? can any one help?
The only reason I download from Creative Cloudd is because my previous software copy is no longer supported, feeling very frustrated!

Tabitha,
Many still use unsupported ealier versions, and there is no real need to upgrade unless there is a real need.
Unless you have done something like installing new fonts or made other changes, it may be releavnt to look at the following list.
Or you can try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Hello, every one. Over the last few days I haven't been able to download any app from the app store. can any one help me, please?

Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.

Andrea...
You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
On the iPad tap Settings > General > Reset > Reset Network Settings
Then restart the iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you still can't download apps, the problem may be your Wi-Fi connection > iOS: Troubleshooting Wi-Fi networks and connections

Hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

Other than physically looking for it, no. It does not have WiFi.

Hi my account was locked for some security reasons and i forget the securicty questions and when i am trying to reset my password through email i am not gettig mail to my id can any one help

hi my account was locked for some security reasons and i forget the securicty questions and when i am trying to reset my password through email i am not gettig mail to my id can any one help.
<Edited by Host>

Have you checked Spam? I have noticed recently in my Gmail that Google sends some mails from Apple to the Spam folder.
<Edited by Host>

Downloaded yosemite and mail application not responding? will not open can any one help?

downloaded yosemite and mail application not responding? will not open can any one help?

Restart the machine in Safe Mode and attempt to open each app. Also please explain exactly how you are attempting to open the apps. For example, "When I click the Safari icon on the Dock it bounces but does not open." To start in Safe Mode hold down the Shift key when you hear the startup tone unitl a progress bar appears.

Can any one help me in this code

Hi all,
I have created a selection screen and my aim is to display some fields or some block dynamically by choosing some radio button is it possible.
can any one help me in this.
REPORT z_g_test.
TABLES: spfli,sbook,sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK 1.
PARAMETERS:rad1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
           rad2 RADIOBUTTON GROUP g1 DEFAULT 'X' .
SELECTION-SCREEN BEGIN OF SCREEN 001 as subscreen ."WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
DATA ok_code LIKE sy-ucomm.
INITIALIZATION.
START-OF-SELECTION.
SELECT * FROM spfli WHERE carrid IN s_carrid.
ENDSELECT.
END-OF-SELECTION.
WRITE:spfli-carrid.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'US1'.
*      call screen 001 starting at 55 40.
ENDCASE.
Is i am going on the right way
Regards,
Lisa.
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy

This is what I meant. Copy this and try as it is and see if it serves your purpose.
REPORT ztest1 .
TABLES: spfli, sscrfields, sbook.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 4 LINES.
SELECTION-SCREEN TAB (25) tabs1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (25) tabs2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN END OF BLOCK tabb1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE abc.
PARAMETERS: p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN .
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN .
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF SCREEN 002.
INITIALIZATION.
tabs1 = 'Search by flight date'.
tabs2 = 'Search by flight number'.
abc   = 'Some other parameters'.
AT SELECTION-SCREEN OUTPUT.
CASE sscrfields-ucomm.
    WHEN 'UCOMM1'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 001.
      tabb1-activetab = 'TABS1'.
    WHEN 'UCOMM2'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 002.
      tabb1-activetab = 'TABS2'.
ENDCASE.

Can any one help me how to install webcenter sites on windows

I'm new to WCS ,can any one help me how to install WCS on windows 64 bit. (not Jump starter kit)
I had downloaded " ofm_sites_generic_11.1.1.6_bp1_disk1_1of1.zip " from ONT forum
can any one guide me with step by step procedure to intall
Edited by: 1000252 on Apr 15, 2013 11:59 PM

Hi
You can find the installation documentation here:
http://docs.oracle.com/cd/E29495_01/index.htm
The way the documentation is structured it is structured based on the Application server you would like to use in your installation.
You might want to look into the following docs, again depending on your choice of supported application server and database server:
- Installing on Apache Tomcat Application Server
- Installing on IBM WebSphere Application Server
- Installing on Oracle WebLogic Application Server
- Configuring Supporting Software
The last document provides information how to configure the DB for your installation.
Hope this helps.
Cheers,
Rodney

TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?

TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can any one help in creating a sales order

Can any one help in creating a sales order using va01 transaction ?
I have a reference sales order number .
Reason why I need this sales order :- I need it to check my task.
The task was to generate a routine using VOFM ,create a Ztable with fields:sales area and condition types .The routine is activated if the combination of condition types and sales area exists in the Ztable.
Can anyone tell me what is relationship between the three :Ztable ,routine and sales order?

VA01 - Create Sales Order
Use these steps to create a sales (or project) order for the purpose of billing a cost reimbursable project. The sales order is the document that links the sponsor to the project.
Get started (SAP menu path, fast path)
Create sales order: initial screen
Create project order: overview
Create Variant to simplify VA01 data entry
1. Get Started
SAP menu path: (not in role ZSBM)
SAP Fast Path
At the Command Line, enter: /nVA01
2. Create Sales Order: initial screen
Order Type: (Use default = "ZPS" for Project Order)
Organizational data: (Use defaults)
Sales organization ("1000" for Sponsored Billing)
Distribution channel ("10" for MIT Distribution Channel)
Division ("10" for MIT Division)
or ENTER
The Create Project: Overview screen displays, as shown below.
3. Create Project Order: overview
Sold-to party (type in 10-digit sponsor ID number, as shown below)
In Material field of first line item: (type PROJECT to identify as sales order for sponsor billing, as shown below)
(or ENTER)
Result: A field for entering the WBS element displays, as shown below.
WBS element (type in 7-digit WBS number for project)
Click on or F11 to SAVE.
A message states that Project order XXXX has been saved.
4. Create Variant to simplify VA01 data entry
Run VA01 as described in step 1, so that the "Create Project Order: overview" screen displays (shown at start of step 3).
On Item Overview tab, scroll to right to find WBS element column (about half way across).
Click on column title, WBS Element; hold and drag all the way to left; then drop next to Material column, as shown below.
Click on tiny (multicolored) icon above vertical scroll bar (shown above, to far right) to display Table Settings dialogue box, shown below.
Under Maintain Variants, type name for Variant, for example "my_settings" (leaving Use as standard setting checked); click on Create; then click on Save button to close dialogue box.
From now on, the WBS element column displays next to Material column when you run VA01.
Check the path as
http://web.mit.edu/cao/www/SB2002/CR/VA01.htm

Downloaded song ends half way through. can any one help me?

Similar Messages

Maybe you are looking for