Downloaded the New iTunes 10.6 and it doesn't open on Windows 7
Since I ran the update for iTunes 10.6 it won't start, open or do anything. I tried removing iTunes and reinstalling and that didn't work. Also tried a couple fixes I got from googling my problem. Nothing seems to be working to get iTunes to open. Earlier versions worked fine.
SnowFawn: from my experience, involving three hours of troubleshooting using Apple's tutorials, without help from Apple:
1. Do the steps here to remove and reinstall all Apple software on your machine, "Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP," at http://support.apple.com/kb/HT1925.
2. If you care, they don't tell you or ask you to uninstall MobileMe in those steps.
3. After I did as they wrote to do, iTunes wouldn't recognize either my iPhone or iPad. On my own I found that Applie's software reinstallation failed to install the Apple Mobile Device Software Driver. So I followed the steps at, "iOS: Device not recognized in iTunes for Windows," which took me 25 minutes alone to find. See http://support.apple.com/kb/TS1538
Those steps solved everything and iTunes is now back to normal.
Similar Messages
-
I would like to revert back to the previous version of Firefox. Please tell me how to do this
hello and thank you for your suggestion. I have tried it and, when trying to open a program which I previously was able to, still get the following message:
Remote XUL
This page uses an unsupported technology that is no longer available by default in Firefox.
Please contact the website owners to inform them of this problem.
Seems unbelievable that I previously had no problem and now I do. Have you any suggestions to overcome this? Do you think I can go back further in Firefox history to get a version that will make it possible to access this. Many thanks! Lynn -
I just downloaded de new iTunes versión and it doesn't work
Hi,
I was trying to update my iOS to 6.0. iTunes requested to update to the latest version (10.7 for Win 64) in oder to update my iPhone. I did the update, restarted and when I tried to launch iTunes it gives an error message saying iTunes stopped owrking (before even starting). I've tried to download iTunes again from apple and re-install it, but it just doesn't work.
Please help. Thanks!
ErnestoWe can't know. We know nothing about your system, your browser, your Internet configuration and so on. Something on your end is blocking stuff and causing this.
Mylenium -
I downloaded the new itunes July 20 and now itunes will not open (or run). I have downloaded a couple times and still it won't open. Any suggestions?
Hello evelyn35,
The following article can help restore iTunes' connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
Just downloaded the new iTunes and now iTunes won't open at all. MacBook Pro user
Downloaded the new iTunes a few hours ago, and now after a few restarts, I get no response at all when clicking on itunes.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
I downloaded the new itunes 11 and not it will not work on my computer.
Why not? What happens when trying to use it?
"Will not work" is useless when asking for help. Without specifics, no assistance can be provided. -
I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.
It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad: File>Transfer Purchases -
when I download the new itunes (on my pc); going through the dowload process it stop me and a window pops up and it says: (there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.)
I have tried several times to redownload and keep getting the same message. what am I doing wrong...Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.
You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily. -
i downloaded the new itunes version and now i can't get itunes to pop up. all i get is error 6034
Hello CHENSLER68,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I just downloaded the new iTunes and now receiving error message when I try to open iTunes!
After downloading the new iTunes when I try to open it i receive the following error message:
iTunes.exe - Entry Point Not Found
Procedure entry point kCMByteStreamNotification_AvailableLengthChanges could not be located in the dynamic link librabry CoreMedia.dllI am having the same issue! And I have tried everything from updates, to moving the coremedia.dll file, to uninstalling and reinstalling so many times im afraid they are not gonna let me download it anymore!!! Please can somebody help??
-
On my desk computer, I tried to download the new Itunes 11 version. I had Itunes 10. It goes thru the whole process and then says "Apple Mobilve Devide failed to start, Verify you have sufficient privileges to start service. I hit retry and then I get Installation successful followed by error 126. I can not enter Itunes at all now. If I click on the former icon it says MSVCR80.dll for error. I can't even figure out how to ask for support on this website. I have several devices linked to Itunes and need to sync.
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Hi I am trying to download the new itunes 11 but it saying an error is occurred and wont download?
Be patient! Apple's servers are currently inundated. Try again later or tomorrow!
-
I am trying to download the new Itunes but get a message saying I need 10.6 version and I only have 10.5. How do I download 10.6?
10.5 to 10.6 is not an update, it's an upgrade. http://support.apple.com/kb/HT1444
Buy 10.6: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Maybe you are looking for
-
In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?
-
Sending photos from Lightroom to Photoshop - covered with colours? Opening from Bridge they are fine. Does anyone know how to set up the monitor from advanced to basic? Someone said that might be the issue but I can't find any area in control panel
-
Opening a file from a java app (not applet)
My program can't find the text file I'm trying to open in my stand-alone java app. I am specifying it like this: File filename = new File("myfile.txt"); FileReader = new FileReader(filename); It is in the same directly as the class files. It won't fi
-
Change the description of a field in a SAP QUERY
Can i change the description of a field in a SAP QUERY report in the output of the report.or only the standard descriptions can be displayed. Edited by: mysap query on May 12, 2009 7:23 AM
-
Roboform toolbar is not available in the latest version of Firefox. Or, if it is, I don't know how to enable it. Te toolbar4 used to be selectable from the view dropdown menu.