Downloaded update for I-tunes (11.1) but now can't open I-Tunes.

Downloded update for I-Tunes (11.1) but now can't open I-Tunes.

Hey erndog55!
There is an article here that I would like for you to take a look at that can help you troubleshoot iTunes installation on your Mac:
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • I updated to new version last week but now can't open my site saved yesterday, asks me to update?

    I updated my Muse to the new version and saved my site to another name, then published. Now I can't open the file, the message is that I have to update. I already did. Plus there's no indication on HOW to update if I hadn't. I'm stuck!
    www.mill-road.com

    If you updated from Muse 7.4 or earlier to Muse 2014 then there are two copies of Muse on your computer. (The 2014 version installs along side the older "Adobe Muse CC" version.) Are you sure you're launching the new version?

  • I've downloaded the entire software(the free trial) but now it wont open. how do I fix this?

    I've downloaded the entire software(the free trial) but now it wont open. how do I fix this?

    You can although did it not also identify a troubleshooting document for you to use?  The package for support option will simply make the installation log available for Adobe employees to review.  If you would like to respond with your token number I would be happy to look at the log file.
    Alternately you can follow the directions listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.  This is exactly the same process which I would use to review your installation log.

  • I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

    I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

    http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
    Mac
    Operating Systems
    * Mac OS X 10.5
    * Mac OS X 10.6
    Recommended Hardware
    * Macintosh computer with an Intel x86 processor
    * 512 MB of RAM
    * 200 MB hard drive space
    For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/

  • Hi Iv'e downloaded mountain lion but now can't open mail?

    Hi Iv'e downloaded mountain lion but now can't open mail?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • I have downloaded Firefox 4 but now can't open it, get the message that it isn't supported on this archtecture

    I have downloaded Firefox 4 but now can't open it, get the message that it isn't supported on this architecture. This is the message:
    You cannot open the application “Firefox” because it is not supported on this architecture.

    Firefox 4 doesn't run on a PowerPC Mac.
    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For a Firefox 4 compatible version that runs on Mac OS X 10.4.11 or Mac OS X 10.5.8 (PPC) you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Hi i have download photoshop to try it 60 days, but i can't open photoshop. I have windows 8 in my computer?

    Hi i have download photoshop to try it 60 days, but i can't open photoshop. I have windows 8 in my computer?

    When photoshop installs on windows 8, odds are you will not see it on the start page. You will need to right click on the background or if you upgraded to 8.1 then click on the down arrow at the bottom left of start page.
    This will bring up a page that shows all apps. Scroll across until you see photoshop CC or photoshop CC 2014. Click on that name to bring it up. Before you do, you can right click on that name and pin it to the start page and or the taskbar. Then it will be easier for you run it the next time.

  • I was using Numbers '08 and just upgraded to 3.5.2 but now can't open any of my '08 files.  Message says save to '09 first to open.  Well, I don't have '09 so what do I do?

    I was using Numbers '08 and just upgraded to 3.5.2 but now can't open any of my '08 files.  Message says save to '09 first to open.  Well, I don't have '09 so what do I do?

    Or you may obtain iWork '09 DVD package from Amazon online et al. Sold at very low price now. It is really worth it. Don't forget to apply the iWork 9.0.3 updater after intalling it.
    iWork 9.3
    http://support.apple.com/kb/DL1563
    Regards,
    H

  • I have downloded ilife , but now can't open iPhoto

    i have downloded ilife , but now can't open iPhoto

    Give this a try:
    https://discussions.apple.com/message/15224241#15224241

  • I just downloaded a program, but now can not open any applications...? I can't open any files or any programs. How would I go about fixing this?

    hey, writing this from my phone. Please pardon how everything is typed.  Quick question. Just downloaded the pear square on program. But now I can not open any applications. I beloved the message that popped up was something along the lines of 'do not have permission to access" ...so... I don't know whether or not I downloaded a virus or not. I was also obviously wondering how I might go about fixing this? -Thank you for your timeo

    Pear square one program

  • Downloaded trial creative cloud but now can't open

    i downloaded the trial creative cloud, the install seems to be on my desktop but i can't open any apps, can anyone help?

    We can't know. You have not provided even the most basic system info or other technical details or an explanation what you actually did/ what doesn't seem to be working.
    Mylenium

  • I have tried to download update for Firefox 3 separate times ,but each time it runs for more than 30 minutes and is still running, is this normal,? How long should this take?

    I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?

    Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
    http://support.apple.com/kb/TS1591

  • Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

    I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
    I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
    I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
    The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
    In OS, when the image is selected no preview:
    Lightroom error:
    Bridge, no preview:
    Photoshop error:
    Ideas, suggestions?
    66 views on this discussion so far and no replies...
    Please help.
    Thanks in advance,
    Arthur

    Something appears to be wrong with your files.
    Are most of your images approx. 3.7 MB?
    This is very small for a 12 MP image.
    If you go back to the original file on your laptop, what is the file size?
    Also the fact that the Mac OS is not showing the preview is unusual.
    Perhaps these files got corrupted when they were moved to your new computer.
    Can you open these files OK on your old laptop?
    Is the OS showing the previews on your old laptop?
    Also compare the file sizes between old and new computer.
    Have you tried repairing your permissions?
    Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
    Good Luck!

  • I am trying to download a very large tarball ( 100 GB) but I can't open tha archive. I am wondering if the download manager may be truncating the file.

    I downloaded a large .tar file (should be over 100 GB) and tried to unpack it with 7zip, but I got an error message saying "Can not open file 'X.tar' as archive." I am trying to download it again in case it was just a random corruption or something, but since I have a few hours to kill, I was wondering if the problem may be that there is a limit to the size of files the download manager will handle.

    Hi Salmonarm, <br/>Sorry no one replied earlier, you have probably solved the problem yourself by now.
    I am not aware of any Firefox limitations on download size.
    Are there any systems available for checking for corruption. Often downloads have hash values that can be used to check.
    Also do you know the compressed file size, does it appear to have downloaded fully.
    Are you running into limitations due to available folder or file size on your drive or file system.
    * see http://en.wikipedia.org/wiki/Comparison_of_file_systems#Limits

  • Updated to 8.2 itunes but now can't open it

    Have never had a problem with iTunes until three days ago when I upgraded to the new version, 8.2. Now when I click on the desktop icon, a message appears telling me that iTunes had found an error and has to close, but it never actually opened! I tried reinstalling the new version two different times, but nothing changed. Would really appreciate some help, advice, answers!! Hopefully nothing too complicated!

    The first thing you need to do is to check if Quicktime works normally. iTunes cannot work if Quicktime does not.
    IF Quicktime is OK, then use this trouble shooting articel of iTunes:
    XP
    http://support.apple.com/kb/TS1421
    Vista version
    http://support.apple.com/kb/TS1717
    If Quicktime doesn't work, it has to be fixed first.
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
    If so uninstall them, they are know to cause problems with QUickitme.
    Then/otherwise download the version of Quickime without iTunes:
    http://www.apple.com/quicktime/download/win.html
    Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
    Restart you computer
    Install the stand alone Quicktime and check if it starts.
    If it does you are in a position to see if iTunes works

Maybe you are looking for

  • Importing and flowing multiple text docs into InDesign CS3

    I have multiple plain text files where each runs several pages long that I want to import into one document in ID CS3. I want to import them and have them flow in a single threaded text frame one after another over multiple pages. With a single multi

  • More on the pointer exception

    ok, I think by using "new" for the ArrayList variable I was able to get around that problem. now a new NullPointerException has come up. One the last line that is listed in the error stack, i.e. the top line, there is this: writesock.write(objarray,

  • External Enclosure for Powerbook

    I recently purchased an Addonics external enclosure to use with a G4 Powerbook. I also bought a Maxtor 400gb drive. After having some problems in formatting the drive, I found out the following from Addonics: **For Mac OS only, there have been report

  • Sending a fillable form

    I am having a problem when mac users click the send form button when I have directed it to go to my email in the actions tab. Is there something I need to do to enable mac users to send the form when I have created it in windows?

  • Doubt about Proxies

    Hi All, While Implementing Proxy----JDBC Scenario, Q1) Where we need to create the Proxy ???? in XI Or In R/3 ??? Q2) What would be the sender service specified in Receiver determination, should it be the Business System Or a Business service. Q3) Al