Downloaded Video Too Big for Screen

From YouTube I downloaded the Mozart opera "Cosi Fan Tutti" as an MPEG4. The resulting video image is nice and clear with good sound, but it is larger than my screen. The usual video controls such as play, pause, etc are below the bottom horizon and cannot be seen and some of the picture is off screen to the left or right.  The Zoom in Universal Access is turned on, but Control-Minus has no effect other than to give me a little blip noise. Is there a way to control the size of the Quick Time Player image? ( I am using 10.4.11 on a late 2007 iMac because of some antiquated software I must have access to.)

Unfortunately, YouTube's terms of use forbid downloads unless there is a download button offered, so we would be violating the ToU here if we were to discuss it.

Similar Messages

  • HT2311 iTunes window too big for screen.

    My iTunes window is too big for screen.  I cannot access the shrink control on the lower fight corner of the screen.
    Any other ways to shrink the screen to fit?
    Bob

    Option-click the green button.
    (66562)

  • PC - TV [Video too big for TV Screen.]

    Hi,
    I'm running Windows XP with an FX 5200 128 Video Card. I have an S-Video plug that turns in to a Yellow RCA wire and plugs in to my TV. I have my display properties set to "Clone".
    When I play a video using Windows Media Player, I can see it on my Computer Screen as well as my TV.
    However, the picture on my TV seems to be slightly cropped. It looks like I am missing the TOP and SIDE portions of the Video. The video fills the entire TV screen, but it looks like the picture is too big for the TV and I'm not seeing the edges.....
    Any suggestions,
    Thanks,
    Andrew.....

    make sure you're using the correct display drivers from nVidia Drivers
    then in the driver control panel for your TV settings, use the zoom controls to adjust how the picture looks on your TV

  • NB305 first time setup display too big for screen

    I just bought an NB305-310 netbook  (two, actually, and the first one had no trouble). It came loaded with Windows XP.  When I turned it on I wasn't able to set it up right away, when I came back to it, I found the display of the welcome screens and the setup process assistant is too big for the screen, as if it thinks it has to fill a 15" or 17" screen instead of 10".  So I can't see to click on the "I agree" box or the "Next" button etc., so can't proceed through the setup.
    I already tried restarting it a couple times (by holding down the power key, since Control-Alt-Delete didn't do anything).  I also tried using the function key with various keys that looked like they might affect display size but no change.  Even the volume function keys didn't change the volume of the setup background music that plays.
    How can I fix this?
    Thank you!
    RD

    mini notebook NB305-N310 
    Try this. Press Alt + Spacebar to open the control menu (which may be off the screen) at the top-left of a window.
    Then press M (for Move).
    That will enable you to move the window using the arrow keys.
    When you get the chance, you'll want to go here and reset the screen resolution to 1024 x 600.
       Control Panel > Display > Settings tab > Screen resolution slider
    -Jerry

  • HDR window too big for screen

    When I open the "Merge to HDR Pro" dialog box, it is too big for the screen and I cannot resize it. Pressing the green + button just resizes the too big screen above my dock, but it is still too big for the options that lie at the bottom of the dialog box. How do I fix this?

    What is the screen resolution of your monitor?
    One workaround I've seen is:
    Hide your OS X dock
    Quit Photoshop
    Restore your prefs: http://adobe.ly/PS_Prefs
    Restart Photoshop

  • Attach/open file window too big for screen

    Just recently I've found that when I go to attach a file in email for example, or open something in the finder the window that comes up from which I can choose my file is too big for the screen. So the bottom corner, which has the "attach" or "Cancel" buttons, is obscured. It's very frustrating... I can hit enter to attach a file but can't cancel it if I change my mind. Hope that makes sense... I've moved the dock out of the way but that doesn't help at all, and I can't use the green button to resize or anything.
    Hope someone can help... I've also restarted the computer but the problem is still there. I'm using a macbook pro, and I have upgraded to the latest OSX software.
    thanks

    Hi!
    I'd click the title bar of the application, then click on the + to fit on screen.

  • Tiny video TOO BIG for YouTube?

    I'm sorry--I searched for "compress video" and got no results--so--
    I have a very short (1.09 minute) video I want to upload to YouTube. It is 122 MB. YouTube has a 100 MB maximum capacity. I've seen 10 minute videos on YouTube, yet my tiny 1 minute video is too big. How do I make it smaller so it will upload? I'm so sorry if this has been discussed before, but I get no help for this on my Mac Help section--thank you!

    If you have Quicktime Pro you can export it and reduce the size. Or use VisualHub in its demo mode (2 minutes max) to covert to a smaller format and size. It works quite good.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • My icons are big and display too big for screen.  help..

    my icons are all big on desktop but not on dock.  safari screen doesn't fit on my display, too big.  what have i done?

    Possibly zoomed the screen.  Hold CNTL and scroll down with the mouse or trackpad.
    Regards,
    Captfred

  • Display is too big for screen on start up

    When I turn on my macbook, the disply is too big, and I can't see the right 3 inches of my screen.  When I put it to sleep and bring it back up, it correctly fits on the disply.  Any ideas why this does this, and how to correct it? It has been doing this several months now.
    -Thanks!

    Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
    Resolution:
    You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. 

  • Safari's download-location selector too big for screen?

    Any one else got this one?
    When I try to select the "Other" download location in Safari preferences, the resulting pulldown dialog for selecting the location is so huge it spans off the right side and below the bottom of the screen, so I can't drag-resize it, or even click "choose" or "cancel".
    Yes, I can just press Esc, or double click on the folder I want, but still this is a bizarre bug which should be easy to fix.
    Safari 3.1.1

    Does not happen for me in Safari 3.1.1. But, to correct your issue try this: open Safari Preferences > General tab and select download location: Other. With the (too-large) dialog box open, press the option key and select Window menu > Arrange in Front. That should bring the resize handle into view at the bottom right, and you can shrink the dialog box down (and that smaller size should be preserved).
    If that fails, again with the too-large dialog box open, select System Preferences > Displays and set the resolution to something very small (e.g. 640x480), then after the switch, immediately change it back to your native resolution - that should shrink the dialog box back down to a reasonable size.
    Hope this helps...

  • Picture on Apple TV too big for screen

    I'm a new user of Apple TV.  Can get picture but no sound.  I'm trying to turn off the Dolby Digital but the writing goes off the screen so I can't tell when it is off.  Any ideas?

    TVs do this by design, it's called overscan and nvidia-settings lets you compensate for it in the same place you adjust digital vibrance, flicker filter etc. (The section is labelled something like "TV-0 (TV-0)" usually.) You can also set the overscan in xorg.conf, but I can't remember the option name off the top of my head.
    You also need to set the TV standard to PAL in xorg.conf for 50Hz. I just need to ssh into my mum's computer and I'll paste the relevent section.
    Section "device"
    Option "TVOutFormat" "composite" #or s-video
    Option "TVStandard" "PAL-I" # default is NTSC
    Option "TVOverScan" "0.65"
    EndSection
    The values for overscan differ in xorg.conf and nvidia settings (0.00-1.00 and 0-20 respectively) so in my case nvidia-settings shows 13 which lines up perfectly on my mother's tv. You'll just have to experiment.
    On an aside, if you're not using cloned output then 720x576 (PAL TV native resolution) with full overscan gives the sharpest image. (But with quite a bit of the picture missing depending on the TV.)
    Last edited by ianegg (2008-01-24 17:44:41)

  • Window too big for screen

    I am fairly new to using PS with a Mac, so there may be a simple fix for this. I finally got the workspace window in CS5 to fit the entire screen on my IMac. Recently, the window has gotten so big, that it hides the tool bars on the sides and bottom of the screen. When I switch to 'full screen with tool bar', I can see everything, but there seems to be no way to permanently restore these settings. Can anyone help?
    Sue

    Hi!
    I'd click the title bar of the application, then click on the + to fit on screen.

  • 970 Gaming - BIOS resolution too big for screen so can't use it, help!

    My specs, Windows 7 SP1
    MSI 970 Gaming MB
    AMD FX-6350
    ASUS Radeon HD6950
    G Skill DDR3 RAM (16gb at 1600mhz)
    1TB Sata HD
    Everything else display related works fine, windows, games, videos, etc. and as this is a new build, yes all the drivers are upto date. However, I can't use the BIOS as it displays as if its four times the screens size!
    I've taken a pic to illustrate the point and attached it,
    And here is of course, what it should look like for comparison,
    As you can see, not only is the res' totally wrong, but some graphical elements are not displaying properly, like the lack of the red border, button surrounds on the left, boot devices missing, etc. Any ideas please?

    Not every TV acts the same unfortunately.
    My one samsung LCD TV looked better using a VGA cable than HDMI (no idea why, it just did), meanwhile the next Samsung LED TV I got looked much better with HDMI but had strange issues whenever I went into the BIOS (this was from a laptop though).
    Expecting a company to solve a problem with a TV that doesn't properly implement the HDMI spec is a bit ridiculous to be honest.

  • Photoshop cs6 window too big for screen, lost the drag facility?

    I have lost the corner of the photoshop window below the dock so don't have access to the drag facility in the window corner. I have tried resizing the screen but this hasn't helped, any ideas welcome!!

    What OS are you running?  I would think it would have some function to allow you move windows that are larger then your display so you can move the windows so part of the window frame is on screen so you can then re-size the window.
    For example I just move my Chrome browser window sot the top of the window is behind the task bar.  I now can not move it necause I can mot position the mouse int the window header bar.  However I can position the mouse over the running Chrome icon in the task bar. Windows will show a preview of the running Chrome window or windows. If I right click on a preview window Window's will open a right click menu  I can click on the move item and them move the off screen window on to the display using the arrow keys or the mouse.

  • Files opened too big for screen

    Everytime i open a PDF i get that the document becomes bigger than my screen and i can't see the titlebar unless i find some edge and manage to resize it slightly then the title bar pops back.

    Windows 7
    Adobe reader X

Maybe you are looking for

  • Where Clause in Logical Table Source

    I have a dimension table joined to a fact table in BMM Layter. I would like to apply a filter in the where clause of the dimension table. Does the fact table also require the same exact filter to be applied in the where clause.

  • Multiple data in each cell in JTable

    Hi, I'm currently working on a program where I need to a JTable that can contain multiple data in each cell. I,ve solved this problem so far by making each cell contain a JList to hold the data, but I'm a little concerned about performance issues. Le

  • 3/18/2014 - Beta - AIR 13.0.0.64

    Adobe AIR Beta Channel Update This beta release provides access to the latest AIR runtime and SDK (with compiler) for Windows, Mac OS, iOS and Android. Below are some of the key features and benefits of King 13.0.  Please see our release notes for fu

  • Computer shut down with ipod Nano

    When I am moving songs (from purchased folder to the ipod) my computer shuts down. No BSoD or anything -- just a total shut down. I've updated all the ipod and itunes sofware. Also, when trying to register the ipods (there are 3 new ones in the house

  • Bolling and posting

    Hello, Can any one imagine the below problem? Delivery and billing was made on 29 th Apr and in the accounting document it says May 1 st (posting). Can any one imagine what could have been the problem?? thanks for your help ! Best regards, Dinesh. Ed