Downloaded VM Template (EL5U3/DB 11.1.0.7/Agent 10.2.0.5/PVM) blocking

Hi:
I've downloaded and installed the Oracle paravirtualized VM template for EL5U3/DB 11.1.07/Agent 1.0.2.05 to a 2.1.5 VM Server. I have used the xm create -c vm.cfg command to start up the domU. After a short period of time, an xm list shows the status as blocked. The console shows this:
Linux version 2.6.18-128.0.0.0.2.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 05:49:36 EST 2009
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000080800000 (usable)
1328MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 526336
Kernel command line: ro root=LABEL=/ S
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0744000 soft=c0724000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2792.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 2065604k/2105344k available (2126k kernel code, 30380k reserved, 875k data, 176k init, 1359880k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6984.47 BogoMIPS (lpj=13968955)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5584k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06F2AA0 could not acquire Mutex [2] [20060707]
No dock devices found.
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06F2AA0 could not acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1253809727.462:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 5739E02E34E738D4
- User ID: Oracle USA, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Console: switching to colour frame buffer device 100x37
input: Xen Virtual Keyboard/Mouse as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vbd/51728
XENBUS: Device with no driver: device/vbd/51744
XENBUS: Device with no driver: device/vbd/51760
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 383k
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
device-mapper: dm-raid45: initialized v0.2429
Registering block device major 202
xvda: xvda1 xvda2 xvda3
xvdb: xvdb1
xvdc: xvdc1
xvdd: xvdd1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
type=1404 audit(1253810793.906:2): selinux=0 auid=4294967295 ses=4294967295
At this point, it just hangs. I can't type anything in to the console.
My vm.cfg is this:
bootloader = '/usr/bin/pygrub'
disk = ['file:/OVS/running_pool/110_dsrepo1/System.img,xvda,w',
'file:/OVS/running_pool/110_dsrepo1/db11g.img,xvdb,w',
'file:/OVS/running_pool/110_dsrepo1/oradata.img,xvdc,w',
'file:/OVS/running_pool/110_dsrepo1/agent10g.img,xvdd,w',
memory = '2048'
name = '110_dsrepo1'
on_crash = 'restart'
on_reboot = 'restart'
uuid = '37d0f14d-41fb-c7eb-93b1-34085b0af2fb'
maxcpus = 1
vcpus = 1
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=dsrepomgr']
vif = ['bridge=xenbr4,mac=00:16:3E:10:2B:8F,type=netfront']
vif_other_config = []
Can anyone help me figure out why the domU is just hanging/blocked?
TIA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

Similar Messages

Error while trying to download a template

We have a couple of users that particiapted in an Excel VBA training (with their laptops).
Since the training they can not download the WebAdi template.
All the VBA windows open up and there is a message of a compiler error with a Duplicate Option statement.
Other users, that did not attend this training can download the template without a problem.
Any idea what they might have downloaded / changed in the training that can cause this error ?
Thanks
Shiri

hi,
Please check the MSExcel setting. we generally need to change it depending on the version. Please compare the two settings , one which is runing and other which is giving error.
Rgds,
Shahnawaz

How to download project template into the SAP NetWeaver Developer Studio

Hi,
I want to download project template into the SAP NetWeaver Developer Studio related to invoice detail get detail,get list etc.
How to do so?Actualy my requirement is to create an iView whcih contain the detail about the invoice.
Thank,
Kundan

Hi
If you have zip file of the project then unzip it into your project location where all projects are there .then in NWDS go to file->import->multiple existing project into workspace->browse the file where you have saved it and select the comp folder inside the project folder->click finish.Now you are able to see the webdynpro project in the webdynpro explorer.If its not appearing then go to Navigatore and right click on project and click on open project, it will open the project in webDynpro explorer.
Thanks
Susmita

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

Something went wrong while downloading your template

We have Office 2013 installed on Windows 7 Enterprise 64 Bit. When trying to download templates from Word, we get the message Something went wrong while downloading your template.
We have confirmed it's not the firewall blocking the download. We have also tried repairing the install of Office 2013.
Any assistance would be greatly appreciated.
Keith

Hello,
Which build version of Office 2013 are you using? Please make sure your Office 2013 is fully patched. You can try installing Office 2013 SP1 to check if it helps:
http://support.microsoft.com/kb/2817430
In addition, please try downloading templates from the link below and check if you will get any error message:
http://office.microsoft.com/en-us/templates/
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

Websites for downloading code-templates (java and jsp) existing ?

Hi,
I'm searching for a website, offering code examples or templates (in java and jsp) for downloading.
For example: A code for creating a new xml-file, login-procedure or sending an e-mail with a java-program, I can customize.
I know, for asp.net such websites for downloading code-templates are existing (e.g. a German website: http://www.aspheute.com).
So I think for java and jsp those sites will also be existing�
Does anyone know some links ?
bye
Chris

Yes, with google - I'll surely find some matches, but I'm looking for links and websites which will be provided by personal experiences.
With google - you won't find any personal experiences...
bye
Chris

While downloading excel template I am getting error in Weblogic 10.3.4

while downloading excel template I am getting error as java.lang.IllegalStateException: Cannot resize buffer - 325 bytes have already been written (Servlet 2.3, sec. 5.1)

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

How to download web template easily?

Hi.
I just want to download web template.
of cause I can download template one by one.
but there is too many template are server.
is it possible download template by role or by other unit?
I don't mind the way download whole template in server.
regards.

hi.
thank you for your answer.
but our system doesn't exist 'RS_TEMPLATE_MASS_ALTER' and 'RS_TEMPLATE_MAINTAIN' function is just for management of one template.
I can't select multi templates to download.
and even doesn't seems to download tools.
do you have other function or could you explain more about how to use these function ?
Regards.

Download free Template for PE

Hello,
Download free Template for PE
http://www.mediacafe.in/product_display_free.asp?cid=83
thanks

After zip download unzip the zip file and you will found psd file
that psd file you can open in Photoshop Elements and use it
still any query please ask
thanks
dhiraj

Trying to Download Illustrator Template

I am unable to download the following template:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1045533#
Using Chrome, the download button doesn't work.
Using IE 10, the download button works, but takes me to a login screen. When I enter my adobe ID and password, the page just sits there with a spinning circular spoked icon going round and round, indefinitely.
As a result, I am unable to download this template, or any templates. This is so frustrating!
Can someone do me a favor and download the above template and e-mail it to me at [email protected]?
It would be much appreciated! Thanks in advance!

I just tried using Firefox and had no problems.

How to download a template from BDN to a program?

Hi,
There is an excel sheet in BDN(t-code-oaor). I need to call this template in a report.
After that I will fill data in this excel and download it on the local PC.
I need suggestions that how can I do it?

This is sample prog for downloading the template from BDN to local system.
REPORT YVAI_SV_LOC.
type-pools : slis.
Tables containing the Fields for appl. toolbar on selection screens.
tables : sscrfields.
Business Document Navigator: Internal Connection Table for the
download of excel template.
data: begin of i_bds_conn occurs 10.
        include structure bdn_con.
data:   objecttext like toasp-objecttext,
        objecttext2 like toasd-objecttext,
        objecttext3 like toasr-objecttext,
        ntext       like tojtt-ntext,
     end of i_bds_conn.
*data : i_local_path_for_copy like rlgrap-filename.
**i_local_path_for_copy = 'E:\'.
data: gv_flag    type xflag,
      gv_item_no type i.
data: gs_bds_conn_marked like i_bds_conn occurs 5 with header line.
data: l_ipi(40) type c.
selection-screen function key 1.
selection-screen begin of block c1 with frame title text-001.
parameters : p_po type rlgrap-filename
                    obligatory default 'E:\test98.xls'.
selection-screen end of block c1.
Intialization for the text for function key.
Create application toolbar with following mentioned text
initialization.
move text-tit to sscrfields-functxt_01.
At selection screen on value request the file seach is performed.
File search opens standard window pop-up for searching the file.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_po.
PERFORM file_search.
at selection-screen.
if sscrfields-ucomm = 'FC01'.
The Excel Id and other information is to be passed to the program
SAPLBDS_TOOLS to get the excel template.
    perform fill_bds_data.
   perform export_document
     in program saplbds_tools
         using gs_bds_conn_marked.
    perform y_export_document
          using gs_bds_conn_marked.
if sy-subrc = 0.
    call TRANSACTION 'YVAI_TEST98'.
endif.
call TRANSACTION 'YVAI1'.
elseif sscrfields-ucomm = 'ONLI'.
The Check for the file Existence for uploading.
    call function 'DX_FILE_EXISTENCE_CHECK'
      exporting
        filename       = p_po
        pc             = 'X'
      importing
        file_exists    = gv_flag
      exceptions
        rfc_error      = 1
        frontend_error = 2
        no_authority   = 3
        others         = 4.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    if gv_flag = ' '.
      message e070(zf) with p_po.
    endif.
endif.
*&      Form fill_bds_data
      Passing the Required parameters for the excel.
form fill_bds_data .
gs_bds_conn_marked-client = sy-mandt.
gs_bds_conn_marked-classname = 'SOFFICEINTEGRATION'.
gs_bds_conn_marked-classtype = 'OT'.
gs_bds_conn_marked-objkey = 'SOFFICEINTEGRATION'.
gs_bds_conn_marked-loio_id =
                            'BDS_LOC2 DDBD0807B93B26F19ED30050569F4158'.
gs_bds_conn_marked-doc_ver_no = '1'.
gs_bds_conn_marked-doc_var_id = '1'.
gs_bds_conn_marked-doc_var_tg = 'OR'.
gs_bds_conn_marked-descript = 'VCPI'.
gs_bds_conn_marked-langu = 'E'.
gs_bds_conn_marked-comp_id = 'vai - test99 file.xls'.
gs_bds_conn_marked-mimetype = 'application/vnd.ms-excel'.
gs_bds_conn_marked-contrep = 'BDS_DB2_R'.
gs_bds_conn_marked-docuclass = 'XLS'.
gs_bds_conn_marked-doc_type = 'BDS_SHEET'.
gs_bds_conn_marked-stor_tab = '2'.
endform.
                    " fill_bds_data
form y_export_document using i_bds_conn_marked structure i_bds_conn.
-- data declaration                                               -- *
data: local_signature like bapisignat occurs 1 with header line,
        export_components like bapicompon occurs 5 with header line,
        i_local_path_for_copy like rlgrap-filename,
        popup_fields like sval occurs 5 with header line.
DATA : i_files like bapifiles occurs 1 with header line.
clear:   i_files.
refresh: i_files.
-- check if document is currently in change modus                 -- *
if ( ( i_bds_conn_chng-loio_id    = i_bds_conn_marked-loio_id and
     i_bds_conn_chng-doc_ver_no = i_bds_conn_marked-doc_ver_no and
     i_bds_conn_chng-doc_var_id = i_bds_conn_marked-doc_var_id and
       i_bds_conn_chng-doc_var_tg = i_bds_conn_marked-doc_var_tg )
        and ( i_bds_conn_chng-loio_id <> space and
               i_bds_conn_marked-loio_id <> space )
        and ( doc_chng_is_open = 'X' ) ).
     -> set info popup -> doc can not be exported
   message i337(sbds).
endif.
-- check if components exist                                      -- *
-- fill signature table
local_signature-doc_count = '1'.
local_signature-doc_id     = i_bds_conn_marked-loio_id.
local_signature-doc_ver_no = i_bds_conn_marked-doc_ver_no.
local_signature-doc_var_id = i_bds_conn_marked-doc_var_id.
local_signature-doc_var_tg = i_bds_conn_marked-doc_var_tg.
append local_signature.
call function 'BDS_BUSINESSDOCUMENT_GET_INFO'
    exporting
      logical_system = i_bds_conn_marked-log_system
      classname       = i_bds_conn_marked-classname
      classtype       = i_bds_conn_marked-classtype
      client          = i_bds_conn_marked-client
      object_key      = i_bds_conn_marked-objkey
      all             = 'X'
    tables
      components      = export_components
      signature       = local_signature
    exceptions
      nothing_found   = 1
      parameter_error = 2
      not_allowed     = 3
      error_kpro      = 4
      internal_error = 5
      not_authorized = 6
      others          = 7.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-- get path for export                                            -- *
call function 'WS_QUERY'
    exporting
      query          = 'CD'
    importing
      return         = i_local_path_for_copy
    exceptions
      inv_query      = 1
      no_batch       = 2
      frontend_error = 3
      others         = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-- get path for the documents by the user                         -- *
perform get_local_path using i_local_path_for_copy.
loop at export_components.
    i_files-doc_count = export_components-doc_count.
    i_files-comp_count = export_components-comp_count.
    i_files-comp_id    = export_components-comp_id.
   i_files-directory = i_local_path_for_copy.
     i_files-directory = p_po.
    append i_files.
endloop.
call function 'BDS_BUSINESSDOCUMENT_GET_FILES'
    exporting
      logical_system = i_bds_conn_marked-log_system
      classname       = i_bds_conn_marked-classname
      classtype       = i_bds_conn_marked-classtype
      client          = i_bds_conn_marked-client
      object_key      = i_bds_conn_marked-objkey
    tables
      files           = i_files
      signature       = local_signature
    exceptions
      nothing_found   = 1
      parameter_error = 2
      not_allowed     = 3
      error_kpro      = 4
      internal_error = 5
      not_authorized = 6
      others          = 7.
if sy-subrc <> 0.
   message i338(sbds).
else.
   message i339(sbds).
endif.
endform.                               " EXPORT_DOCUMENT

Possible download new templates or items?

Hi All,
I'm just switched to iWork 09 and I can say to feel enthusiast of its features. In particular, I'm curious to understand if someone of you know if possible download new templates or simple images in addiction to the ones already present in Pages 09. I mean if it exists an official place on the Apple site where download new templates as well as do Microsoft Office.
Thanks,
Mariano
Message was edited by: morianas

No official site driven by Apple.
You may look at:
http://www.iworkcommunity.com/
For pictures, Google is your friend.
Yvan KOENIG (VALLAURIS, France) mercredi 7 octobre 2009 17:13:30

How do I download a template on my ipad?

I want to download an template (invoice) that fedex created for me and leave it so I can print several invoices to different costomers using the same invoice?

Email it to yourself, then fetch it on your iPad.

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Block Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Blocked Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Hi. I'm trying to download itunes on vista 32 bit. I've uninstalled my previous version of itunes. Each time I start downloading it stops at 12% - every time. I've turned off my pop-up blocker. Any ideas greatly appreciated

Hi. I'm trying to download itunes on vista 32 bit laptop. I've uninstalled my previous version of itunes. Each time I start downloading it stops at 12% - every time. I've turned off my pop-up blocker. Any ideas greatly appreciated

After this frustrating event, just wanted to let others know how I solved it. After fully deleting iTunes 8 - still no success. Finally went to the Apple store in Perth WA. Using their in store wireless, it downloaded fully. I use wireless 3 and obviuosly the signal is not strong enough. The Apple store is one amzing experience - worth the frustration with getting iTunes 10 downloaded. Will have to take another visit to the store as my upgrades keep falling over.

Downloaded VM Template (EL5U3/DB 11.1.0.7/Agent 10.2.0.5/PVM) blocking

Similar Messages

Maybe you are looking for