Downloadhelper 4.9.22 is not working; dwhelper forum does not load, bugzilla does not load

Version 4.9.22 gives 0kb files. There is no apparent solution in this forum. The Downloadhelper support forum page does not load. The buzilla link on the Downloadhelper add-on page does not load.
Is there an actual solution for this?

Here is the correct bug report, for anyone that cares:
https://bugzilla.mozilla.org/show_bug.cgi?id=930788

Similar Messages

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.

I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?

Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex

I buyed a new computer and photoshop was not working anymore, I reinstalled it but it does not accept my serial number

I buyed a new computer and photoshop was not working anymore, I reinstalled it but it does not accept my serial number@

What message do you get when you try to activate it?

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

HT5012 Hdmi does not work on my iPad or iPhone since doing the update 7.0.2

iPad and iPhone the hdmi out does not work have audio but no picture since I update to 7.0.1 or 7.0.2 is still does not work it did before

Try resetting your wireless router by unplugging the router from the power for about 30 seconds then plugging it back in.

Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2). With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings. But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
I have started this as new discussion as, even though I am not terribly IT savvy, I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My apple id is not working i fill up all information but will not work

My apple account is not working i fill all information but still not working i am facing problem again and again sing up problem and my bill problem and my bank card problem i want to download some thing its free on apple store but error in sing in problem and billing

Settings>itunes and apps stores. Be sure to fill in the ID and password. If you get an error, then you are using the wrong ID and/or password.
Try this link...
http://support.apple.com/kb/HT1918

Downloadhelper 4.9.22 is not working; dwhelper forum does not load, bugzilla does not load

Similar Messages

Maybe you are looking for