Downloading hp solutions center

My computer crashed and I am trying to find how to download HP Solutions Center. When I get there I don't think I remember how to set it to scan multipal photos at once. Can someone please help me?
Thanks, mzbhvn116

What printer do you have?
If you do not have the CD, here is a link that will assist you on downloading the drivers. Download the FULL-FEATURE software.
http://goo.gl/BVOOg
When everything completes, you will open up the solution center and Scan document. When the windows pops up, you will scan, then select ADD A PAGE.
Let me know if this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Downloading HP Solution Center for Windows 7 Professional 64-b

I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer. My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download. Any assistance will be appreciated.

Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues finding the installer. I would like to help.
I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can not install Solution Center

Hi,
i just got a new SSD, and now i had to install windows again.
But after i installed windows i want to install the Lenovo Solution Center, but it wont install.
It shows a strange Error Msg its in german so i translate it :
Database : The Control Table coud not loaded in to the SQL Query SELECT 'Control' Type X Y ......
Also when i try to use the Programm ThinkVantage System update it doesent work, it stops with the error :
There was an error with your login data.
Any one any ideas?
thanks,
syd

I have the same troubles. My orginal HDD crashed so i had to buy another one, i didnt have a recovery disc so i installed windows directly from CD and i've been downloading drivers after that. I don't know why i cant install lenovo solution center, HELP!

How do I download the solution center to my HP Touchsmart 310 pc

I have a HP Touchsmart 310 PC with the Windows 7 operating system. Back in January I started having trouble logging in on my page. I was the only admin on the pc, so I could not access certain information or make any changes to the computer. I finally erased everything in the computer memory and started over from scratch. I have an HP Photosmart printer that I use, but when I re-installed the software, it did not include the hp solution center, so I can't scan any documents or photos to my pc. I need help!

Hi,
Please let us know what is your printer, hope we can help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

SOLUTION: Get Win 7 Printer Drivers/HP Solution Center to Work on Windows 8

Took me some time to figure it out, but I got it to work.
First of all, the preliminaries:
I have an HP dv9700t laptop running the 64-bit version of Windows 8 Pro RTM (not the preview, but I assume it will work on Preview as well). My printer is an HP Photosmart C7280. If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation files in Windows 7 Compatibility Mode.
Windows 8 does come with stock C7280 printer drivers that work by going into Control Panel>Devices and Printers>Add A Printer, but there's only limited functionality with those. As such, I wanted to run the HP installation files to have increased functionality.
Unfortunately, when I ran the full installation file from HP for my printer, there was no "Install a Printer" button, or any of the other usual buttons. There was only an "Exit" button.
Here's how to get it to run and install properly.
Right-click on the HP Full Installation file, then Properties>Compatibility>then check the box for "Run this program in compatibility mode for:", then select "Windows 7" in the dropdown box, then Click "OK".
Run the installation file as you normally would in Windows 7.
I tried this two ways.....the first while connected via USB cable. It worked just fine with no errors.
I also tried it with the printer connected to my network via WiFi. Ran into some problems.
The installation program would detect my printer just fine, and I clicked "Next" or "OK" or whatever the prompt was to install the printer. The installation would hang on "Reply from SNMP" (or something similar) and it would list the IP address of my printer. I waited, waited, waited for an hour, and it wouldn't get past this. Not to worry.
Proceed with normal installation until you get to the "Reply from SNMP" message and the installation stops responding.
Enter the Task Manager with CTRL-ALT-DEL. You'll see an entry in the "Apps" for the HP installation program....LEAVE THIS ALONE.
Below the "Apps" list you will see the "Background Processes" list. In this list is something along the lines of "HP Network UI", or something similar, consuming a significant amount of CPU. Highlight this entry, then click, "End Task" at the bottom.
The "SNMP" window will close and your installation program will then finish normally and your printer/fax/scanner will be properly installed. HP Solution Center works normally, as does printing, scanning, etc.
Will the next person who uses this give some feedback and also answer some questions for me so I can update this post with more specific information?
Please let me know what the exact "SNMP" message is when the installation hangs. Please also let me know the exact name of the "HP Network UI" background process is, as well as the HP Installation app name.
Hopefully this will help you.
This question was solved.
View Solution.

thanks for the solution. I have an HP Photosmart D110a wireless printer. Windows 8 installed a generic printer driver that worked fine for printing but I lost all functionality to the scanner of the device.
I tried to follow your instructions. I do get an error at some point when the software installer tries to talk to the printer and it gives an error message. It finds the printer OK but stalls. The error message is different and merely reports that there is a problem, no further details. There is indeed a background task "HP Network UI" or similar but ending this task doesn't do anything on my system. The Network UI task ends and the error message stays open. I ended a couple more background tasks but it would not go anywhere.
I then uninstalled the entire package, unplugged the printer, turned its wireless feature off and reinstalled the software in Windows 7 compatibility mode. When it asked to plug in the printer to the USB it finds it right away, the installation continues and is almost finished when it stalls again. This time it reports that it has a problem again and needs to uninstall. Still with the error message and installer open I open the installed "Solution Center" and I can find the printer fine (it actually lists two devices, one being grayed out). It initially gave me an error message when I tried to scan something, but ignored the error. Eventually the scanner worked as intended. I force ended all installer tasks in the task manager and the Solution Center works fine and does all tasks it did under Windows 7, now in Windows 8.
thanks again for the post

HP Solution Center stopped working and HP Print and Scan Doctor cannot find my OJ4680

HP Solution Center came installed on my HP G60 notebook with Windows 7 premium 64 bit. It suddenly stopped working--it says it cannot run because the device installation is not complete. If I open HP Sup0ort Assistant it says the OJ4680 is ready and it is designated as the default printer in Printers and Devices but when I try to run HP Print and Scan Doctor it cannot find it--it can only find OJ4500 which I use when I'm in my second home. Please help me fix this as at this point I can't print or scan.

Thanks for the help and quick response. I haven't tried your solution yet because before I received your instructions I updated the drivers again and it appears to be working though I've had a message since then that I couldn't scan because my device was offline which was not true as I had just printed a document. I used HP Print and Scan doctor and followed the steps which included turning the device off and unplugging it for 60 seconds. I can now copy, print and scan but I still have the yellow triangles with exclamation points on both my PC and all in one. I'm not sure I want to do more at this point since everything is working well at the moment. BTW my laptop is set for automatic updates by HP and Microsoft, why didn't they keep this problem from occurring?

Win 8 - Photosmart c4580 not scan with wifi miss HP Solution Center

HP Photosmart c4580
Windows 8 64-bit
My printer is the Photosmart c4580, and i have the Windows 8 64-bit OS.
I can print throw my wi-fi connection, But i can't scan.
If i want scan i must plug the usb cable (10meters long because the printer is in the other room).
I want to see the ink level and i can't because i i don't have the HP Solution Center in win8.
Try installing the win7 drivers and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (Proprieties - run win7 mode), and the program crashes.
What can i do for scan using my wifi connection and installing HP Solution Center
Thanks
This question was solved.
View Solution.

Everything is ok now with the new drivers.
Thanks
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109997-1&cc=uk&dlc=en&lc=en...

C6280 HP Solution Center will not run or install

I have been using my C6280 on my home network for years with Solution Center intalled on a desktop running Vista andtwo laptops running Windows 7 with only the print drivers installed. HP Update was eanbled on the desktop.
In the past two or three months, I started to get a number of error messages on my desktop indicating there was something wrong with Solution Center. The issue steadily worsened to the point where Solution Center would not run at all (unable to detect device seemed to be the most recurrent message) and I was unable to run the scanner.
I was able to maintain printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do this every few days.
I went on the forum and decided the best course of action to restore full functionality was to uninstall all HP software and then download/install the software suite. I downloaded the Vista 32 bit version (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried installation several times with no luck - the installation always seemed to get stuck immediately after extracting files.
I went back on the forum and found out how to do a level 4 uninstall from a temp folder beginning with 7z... . I did that and tried again (after checking that my Adobe Flash was up to date). The install went a little further this time but eventually stopped again. File not found. I ran the installation .exe from the temp file and went a little further but stopped again. An error log was created and a 'fix' was placed on my desk top. I followed the instructions but the 'fix' did nothing (it was just a text file - nothing to run that I could decypher). Just to make sure I was doing it right, I repeated the entire uninstall/download/reinstall process two more times with the same result.
The above process was beginning to remind me of Einstein's defiition of insanity (do ing the same thing over and over and expecting different resuts) so I gave up and successfully downloaded and installed the printer drivers to restore print functionality.
How do I get my scan functionality back?
Thanks
This question was solved.
View Solution.

Hi,
May you have McAfee Antivirus on your PC?
If so try following the steps belwo and let me know if that may help:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Reboot your PC
8. Run the installation file and check for any difference.
9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
If the issue persists, please clarify what security software you are using,
As well open the device manager and expend the Processors category - what processor you have on your PC?
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Solution center will not recognize J4680 in wifi

My J4680 will print a document in wifi so I know my computer and printer are communicating. I have reinstalled the software and I am still able to print. However, when I open HP Solution center to check ink level or scan an item it will not recognize the wifi printer. It will recognize it as if I have the USB connected. This defeats the purpose of having wifi options if I cannot communicate with the printer except to print. I cannot even run diagnositics like cleaning printer heads etc because HP Solution center will not communicate via wifi. Solutions?

That link is not working for me at the moment either @judomax , perhaps if you wait it out for a few hours or a day it will be back up and running. It is possible there are changes being made to the page. It would be nice it if said "under construction" or something of that sort, but in the meantime I guess we sit and wait.
I will keep you posted if the link is no longer valid and the Print and Scan Doctor link changes. I will keep an eye on it.
Thanks for letting me know.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP solution center will not recognize my printer

I have a all in one 7410. I have an HP laptop with vista and another with windows 7. I have uninstalled reinstalled and updated all the software, patches etc. I took off the firewall. I cannot get either of these computers to work anymore to scan. I can print, i can copy, i just cannot scan. Every time I open solution center on either computer it says either no HP device detected (which it is installed) or rest of software never installed, which it is !!! I downloaded the latest utility and it says the same thing. HELP! I need to scan college recommendations for my daughter and this thing isnt working on any of my computers, forget my windows 8 computer!

RegCure has caused this problem with my PCs. I have restored what RegCure removed and all is well. I am working to determine just what RegCure removed which caused the proboblem.

HPD110a - HP Solution Center does not find printer

Changed internet service provider.
Now my printer has new IP address.
By opening my browser to the new address, I am able to scan
Also able to print from Windows 8.1/64 with the printer installed.
But,
Cannot scan from printer using the "Scan to PC" button.
Also cannot use HP Solution Center or HP AiO Printer Remote,
because they cannot find the printer. They seem to be stuck on a previous IP address.
I dont find a way to change the printer IP address in these tools.
The scan command issued from browser with the IP address does not enable me to scan more than 1 page at a time
(ie does not handle multi page docs)
Very inconvenient.
Please help
PS All software is up to date

Hi @herozero , and welcome to the HP Forums!
I see you're experiencing connectivity issues. I would like to try and assist.
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP Pavilion g7 can't find or re-install HP Support Assistant & HP Solution Center

After a week or so ago, I discovered my printer could no longer scan. Made several (& I mean several) attempts at following the instructions to install the full driver for my HP Photosmart C7180 printer.
I then ordered the full drive CD for Window 7 (64) from HP and I am still having problems.
After going around and around trying to get it to work; uninstalling and re-installing everything listed in the Support & Downloads on the HP website. I discovered both my HP Support Assistant and my HP Solution Center are no longer on my computer. They won't re-install either following the instructions per HP Support & Download on HP's website.
I have no clue how to get things straightened out.
The most frustrating thing is there seems to be many other people with printer/scan problems even with other printers. Everything I have read so far as a solution to their problems is the same thing I have been trying to do.
Someone please enlighten me?
Hp Pavilion g7 1000 CTO
Window 7 Home Premium (64)
Hp Photosmart C7180

Hey Fasteddie0747,
I understand you are having an issue with the HP Support Assistant & HP Solution Center installing on your Hp Pavilion g7.
Here are some step you could check on your Computer,
Click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - Started
restart the computer and try installing again.
Please feel free to contact me if you have other questions
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP C7280 Solution Center won't work after upgrading to Windows 7

I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
Then a pop up window gives some steps to try to fix the problem.
I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
I then removed the printer from hardware, and uninstalled the Solution Center software,
Re-installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
installed dot4patch_reboot.exe,
shut the printer down, unplugged it for a few minutes, rebooted the computer, and
the same errors occur.
The driver is a year old, and I can't find a newer version.
Released:
2009-10-20
Version:
13.1.0
The patch is a few months newer but it didnt help either.
» HP Print Software Patch When Upgrading Vista to Windows 7
2009-12-06 , Version:1.0, 1.22M
This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
Any help is appreciated.
This question was solved.
View Solution.

Finally got this problem fixed. No Thanks to HP Support
I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning problems in the C7280 printer software.
Go Figure ......

How do I get a "transfer images" button to show up in the solution center?

How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
Scan buttons are displayed and work, as does print.

What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

Downloadin​g hp solutions center

Similar Messages

Maybe you are looking for

Downloading hp solutions center