Downloading additional content appears successful, but nothing has actually installed

I have been trying to download all the additional content for Logic for the past week. Initially, I began downloading everything together. This resulted in windows popping up saying 'download not successful' or 'unable to complete download'. Subsequently, I started downloading the packages a few at a time and this seemed to work perfectly. Although it took a long time, the download completed, and upon entering my password, began installing the new content. However, none of the new content has been updated in my Logic library. It simply cannot be found.
This is extremely frustrating. I need Logic for my work and changed to this software after hearing so many good things about the product. Downloading additional content should not be this difficult.
Any help would be greatly appreciated.
Thanks a mill

Erik,
I think it refers to...  if you move the Logic Pro App to a different drive... after install.. as I found out last week with one of my clients... who couldn't find the additional content after install.
I don't believe you can actually install Logic from the App Store, to a different drive other that the system drive.. But you can move it.. after install..and run it.. but with all the various issues including updating incorrectly etc.. that doing that can cause!

Similar Messages

  • Says download has been completed but nothing has popped up or changed?!

    I have just recently tried to download adobe photoshop 12 and in the installation it says that the download has been completed but nothing has appeared on the desktop or on the installation was wondering if anyone could help?? Please and thank you!

    Hi,
    Kindly post this query in Photoshop forum.
    Refer to this link:Photoshop General Discussion
    Regards,
    Florence

  • "Download Additional Content" Does Nothing?

    I've been using a trial of FCPX for a while and today I went ahead and purchased it from the App Store.
    One of the first things I did was go to the FCPX menu and choose "Download Additional Content," but all this does is take me to the Updates section of the App Store where I am informed that there are no updates.
    What's going on here? Do I already have the additional content just by installing FCPX? If so, how can I verify that I have the additional content?
    Thanks in advance for your help.

    For anyone who has this problem in the future: just wait, and the update will eventually show up in the Updates section of the App Store. I had installed FCPX to my MacBook Air to see if I could get the "Download Additional Content" to work there, but it didn't. However, this morning (almost 24 hours later), I have a notification in the App Store that the Supplemental Content 1.0 update is ready to install. Lesson learned.

  • Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Thanks rhoydotp,
    The download was actually the successful part!  I had no issues with it timing out or anything.  My problem was the actual install, after the download was complete.  The installer just stopped about a quarter of the way up on "Alternative Kits" and never made it to any of the other kits.  I think I'll try installing them one at a time like you said, and see what happens.  Hopefully it works!
    -marth3

  • My ipod nanos are not being recognized in iTunes. I have tried everything! Changed the drive letter, the disk to FAT32, resetted it, downloaded itunes again, but nothing has worked! HELP please.

    Somehow my nano now lost all its music so now its empty!  Also, before windows used to recognize my ipod and i'd get a pop up saying "open to view files" but now I don't even get that anymore. I have also tried syncing it by putting them in disk mode but NOTHING has worked. I am getting so frustrated.
    I followed all of the "steps" on the apple support page but none of that has worked too. PLEASE help me because I literally feel like just throwing my ipods out the window. I never had this problem before.

    When you connect your iPod to your PC, what appears on the iPod's display?  Does the iPod charge when you have it plugged into the PC?
    Are you running the latest version of iTunes (10.6.3)?  It wouldn't hurt to also make sure your Windows OS has all of the latest patches and updates as well.
    I assume you have plugged the iPod ino different USB ports located directly on your PC and tried using another 30 pin dock connector cable to rule out the possibility of a bad cable?
    B-rock

  • I am trying to download latest itunes update and after clicking download it changes screen and its says 'thankyou for downloading' but nothing has occured?

    My PC says itunes cannot use my phone or ipad as they have latest ios7 and i need to update itunes to latest edition.
    When I go into Itunes and download the latest it says "thankyou for downloading" but nothing has changed?
    Any Ideas or help appreciated....

    See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    tt2

  • I just downloaded ios5 to my iPhone 3gs but nothing has changed ... i don't have a notification centre or anything ! help please !! :(

    I just downloaded ios5 to my iPhone 3gs but nothing has changed i have no notification center or anything help!

    Hi,
    Just updated Mac with Lion Recovery and Mac OSX update, then updated my iPhone 3Gs with V5 software. Here is a screen shot of my notification center.
    Have to say all went extremely smoothly along with a few cups of coffee, only thing that happened was after I hooked up to iCloud I needed to get an iPhoto update in order to get photo stream working, which I did and all is fine.
    Once again a big thank you to Apple and all the hard working tech people.
    Not sure what has happend but are you sure that the upgrade took? Just check your software version in settings > general > about.

  • After Snow Leopard 10.6.2 TM appears to backup, but nothing has changed

    I went to find a backup copy of a file and noticed that all hourly backup times are available but nothing has changed or actually backed-up since OS upgrade. Console error log says this.
    12/3/09 11:07:31 PM com.apple.backupd[52779] 2009-12-03 23:07:31.619 diskimages-helper[54176:2103] Error loading /Library/Plug-ins/DiskImages/NUMPlugin.bundle/Contents/MacOS/NUMPlugin: dlopen(/Library/Plug-ins/DiskImages/NUMPlugin.bundle/Contents/MacOS/NUMPlugin, 262): no suitable image found. Did find:
    12/3/09 11:07:31 PM com.apple.backupd[52779] /Library/Plug-ins/DiskImages/NUMPlugin.bundle/Contents/MacOS/NUMPlugin: mach-o, but wrong architecture
    I moved this /Library/Plug-ins/DiskImages folder to the trash and TM is working again. What is that package for and can it be safely deleted? Why did it get corrupted?

    this is not part of OS X. this is a plugin installed by some 3rd party app you have. I don't know which. google indicate that it could be Norton AV. do you by chance have Norton?

  • 3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    aerol wrote:
    Are you trying to install all the content options at the same time?  If so, have you tried to install them one at a time?
    Yep.... this worked fine for me
    CCT

  • After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    Try downloading it with another browser.
    If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

  • How do I Download Additional Content

    Hi...I've got a MacBook Pro running OS X Mountain Lion fully patched and updated. I'm not usually a Mac user but I'm fairly comfortable with it when I do...I know enough to be a Power User. I purchased/downloaded Mainstage 3 today. It prompted me after the install to Download Additional Content but I had to restart due to some other updates I was running so I just figured I'd be able to do it when I was finished with the restart.
    Now, when Mainstage is open, I go to the MainStage 3 menu and the option for Download Additional Content is grayed out. Why is that. What am I missing. I figure I'm just missing something easy. I've perused the various support forums and manuals and haven't figured out why. Can someone point me in the right direction?

    I would recomend removing (Deleting) Mainstage and re-install from the App store, keep in mind the initial install is about 2-3 GB download, and then the additional content is about 30 GB.  
    To remove a Mac App Store app that appears in Launchpad
    Follow these steps while you are logged in with an administrator account:
    Enter Launchpad.
    Click and hold on an icon until you see all icons jiggle.
    Click the "x" button in the upper-left of the Mac App Store app icon you want to delete.
    Note: If you do not see an "x" button, either the app is not from the Mac App Store or you are logged in as a standard user.
    Click "Delete" in the confirmation dialog to delete the app.
    Tip: If you want to reinstall a deleted app, open Mac App Store, click the Purchases icon, then click on the "Install" button for the app.

  • Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

  • Downloading additional content on OS X 10.10

    Hi,
    I'm experiencing a strange situation with Logic Pro X 10.0.7 on OS X 10.10 regarding additional content.
    I'm quite sure that I have selected everything in the "Download addition content" when I started my download and I think this screenshot confirm my theory:
    As you can see if I presse "Select All Uninstalled" button nothing is selected, so it seems that everything is already downloaded and installed, but as I click on one of this content the button "Install" turn enabled and if I click it would start downloading it!
    Moreover if I open some song I get a warning that there are contents that are missing and have to be downloaded. For example "Standby House Beat" loop and "Euro Basic Beat" loop are missing (I know since I got in one of my songs).
    Are you experiencing the same problem?
    Thank you.

    I've tried to reindexing the loops as you suggest, but I still missing some loops! So for example when I open my song the loop "Euro Basic Beat 4" is missing while "Euro Basic Beat 2" is available.
    I don't how to solve and I would like to avoid downloading everything again!!!
    All loops and instruments seem to be downloaded now:
    So what can I do?
    Thank you.

  • I am having trouble downloading additional content.

    I am having trouble downloading additional content.I t gets about 1/4 the way complete then freezes and says that it can't download the content and to check the internet connection. Checked internet connection numerous times with other devices as well as with the provder and there is nothing wrong with the connection. I have even tried streaming music at the same time I try to download the content and it still disconnects while the streaming has no problem.
    Any Help?

    ... doublechecking to see if I'm reading your tags right, Sexy ... are you getting an error 2 when you go to launch iTunes after the install?
    If so, is it saying that Apple Application Support cannot be found?
    What Windows OS are you using? XP, Vista or 7?

  • My itunes has stopped playing music. I have unintalled all apple apps and reinstalled and updated but nothing has worked. What can I do to fix this?

    My itunes has stopped playing music. I recently downloaded more music and now it has stopped playing, it says it is playing but there is no sound and the time bar does not move from 0. I have uninstalled all apple apps on my laptop and reinstalled and then updated the software. I have tried 'repair' aswell but nothing has worked.

    Songs in the itunes store are also not working

Maybe you are looking for

  • Need help in Creating a sequence

    Hi, I need to create a sequence which starts with the value one more than max value of one of the columns in a table. Can anyone help me in this regard? Eg: I have a table 'User_Details' with one of the columns as 'ID', I need to create a sequence fo

  • Canon EOS 7D Battery drain Issue

    Hello, Last week I bought a new Canon EOS 7D body. Before starting to use the camera for the first time I fully charged my battery and started using it. I used the camera for one week. I shoot raw with back display always on and LCD brightness to ver

  • Lists - numbered list lined up on period after numeral

    Using a tab you can have stuff lined up on the decimal. If I have a list of more than 9 items the period shifts to the right. Back in the day, in typing class, I was taught to have the same effect in making a list. Was easy then by typing a space bef

  • Audio-Video out of sync... lag after publish

    I've been searching for an answer for hours on every message board Google knows, and I find several threads with my same question but without an answer...so here goes. Captivate 4, Win XP Pro. I've recorded a 92 slide 10 minute application demonstrat

  • Oracle markup drsxsopen error

    Hi! I'm getting errors whenever I try to call ctx_doc.markup in my stored procedure. Here's my stored procedure: function testFunc(anEmpId in varchar2) return varchar2 is   clMarkedUpText clob;   vSurname varchar2(100); begin   ctx_doc.markup(     'E