Downloading Adobe Reader from distribution licence link - 404 page not found

I have recently applied for the Adobe distribution licence for Adobe Reader. This was successful, shortly after applying I received an email with the licence attached and a download link for Adobe Reader XI, The problem is the link doesn't work I just get 404 page not found, the link I cannot put on here as the licence will be broken.
For full installers:
To download the English language version of Adobe Reader XI with Acrobat.com in compressed .exe format, click here.
You may not share the above link, share information with others, or publish the above link on websites, blogs, or by any other means that can be publicly accessed. The information contained on this site is meant for your use only in accordance with the Adobe Reader Distribution License Agreement you accepted. You may direct others to http://www.adobe.com/products/reader/rdr_distribution1.html to request distribution rights.
What i need to know is can anyone (from Adobe) send me a replacement link, can I re-apply for the licence to get another link or even better under this licence can I download the software from Adobe - Adobe Reader download - All versions instead. I have contacted Adobe chat support who directed me to phone support, phone support flat out refused to help and said the only support would be via this forum.
Hopefully someone here can answer my questions.
Thanks all.

Brilliant thanks, I see nothing wrong with downloading from here, it even states "In order to distribute Adobe Reader software you need to have a valid Adobe Reader Distribution Agreement in place" which I do.
Thanks again ~graffiti

Similar Messages

  • Download Photoshop CS3 from Adobe when I click the link I am getting http 404 page not found.

    I have a copy of Photoshop CS3 on my old Macbook. Need to move to my new Macbook with no CD drive.  Following instructions it says to download CS3 and enter serial number.  When I attempt to download from Adobe and click the link I am getting http 404 page not found.

    Download CS3 products
    Works for me. If there are issues, use another browser and check your network configuration.
    Mylenium

  • Downloaded adobe reader from adobe but cannot open pdf on uni website

    downloaded adobe reader from adobe website but when trying to open a pdf on uni site keeps telling me that i must relaunsh adobe reader & accept the end user license agreement, but when install adobe reader it doesn't ask for this? please help

    Accepting the EULA is not done during the installation, but when Adobe Reader is launched for the first time.  That's what you need to do (not the browser plugin, but the actual Reader program).

  • Error message of "404 - page not found" after downloading and installing Firefox 15

    Error message of "404 page not found" after downloading the latest version of Firefox.

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • 404 Page Not Found from the Page Definition

    Version 1.6
    I'm trying to run my app by clicking on the stop light on the Page Definition screen and I'm now getting a 404 Page Not Found error. There is NO entry in the Apache Error log, however, there is an entry in the Access log which is:
    htmldb_public_user [03/Oct/2005:15:02:52 -0500] "GET /pls/htmldb/f?p=110:1:4702644663970887147::::: HTTP/1.1" 404 326
    Obviously, the 404 is the Page Not Found code, but what is the 326?
    Can someone help with this?
    Thanks,
    Joe

    Sorry forgot to add back the details.
    Note: 295550.1 Says its still around in 10.1.0.3 but not 10gR2.
    Symptoms
    After ugrading database to 9.2.0.6 : GET /pls/htmldb/wwv_flow.accept HTTP-404 ORA-06502
    WHEN CONNECTING TO HTMLDB
    Cause
    This problem was reported in Bug 4015165 10.1.0.3 PLSQL 10.1.2.0.0 PRODID-11 PORTID-453
    Abstract: REGRN:SCALAR VARCHAR2 IN BINDS WITH DIFFERENT SIZE RANDOMLY FAILS WITH ORA-6502
    Solution
    Install the following patch from metalink Patch 4015165.

  • 404 page not found in one sub link of SharePoint Site

    We have an SharePoint 2010 Farm (a single farm), it was disconnected by accidentally, I reconnected it successfully through config wizard, but as I tested each site in the farm, and found one of  links on a site was gave 404 page not found error.  The
    site (http://xxx:200/default.aspx) is working and other links on this site are working only one link is showing 404 error, I've checked
    1) Eventview, nothing related
    2) SharePoint Log, nothing related,
    3) IIS, running fine since the site is up, 
    4) checked at CA, site collection and web application are all good.
    Where else I should check? 
    Any help would greatly appreciated.

    which link is throwing the error, could you please mentioned that?
    Do you have any custom  /farm solution deployed into the farm, if yes make sure the solution is sucessfully deployed.
    Also make sure if there is any customization which required to that page , still there.
    Try to detach the content DB and reattach it.
    also try to reset IIS.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • 404 page not found error after upgrade to 4.0 from 3.x

    We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
    Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

    A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
    Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
    ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
    Edited by: mimi_jones on Jul 18, 2011 6:16 AM

  • Overwriting old website in FTP - 404 page not found error!!! Heeelllp! :(

    Hi there,
    I recently re-designed my website on Adobe Muse. It was originally designed in iWeb. For the iWeb website I used a 3rd party FTP application (Transit) to upload the site.
    I wanted to overwright the old iWeb website with my new Adobe Muse website. So I deleted the files from the iWeb website on Transit, and used the inbuilt Adobe Muse FTP option to upload the new website.
    Now, no matter what I do, all I get is the 404 'page not found' error when I try to visit my site.. What am I doing wrong? Are my settings on Muse incorrect? Should the site pages have a specific name? The home page that I want is titled 'selected artwork' in Muse... should that have something to do with the home directory link?
    I'm so lost and frustrated! Please help!
    Any help or advice would be so much appreciated!
    Cheers,
    Harriet.

    Hi Parikshit!
    Thank you so much for your response!
    My site is www.harrietbody.com and yes, I did change the name of my pages... I changed everything... I've asked my hosting people to reset my account with them because I think I may have made a mistake deleting everything from the old website...
    I will try exporting as HTML and uploading with Transit and see how I go...
    I'm sorry if this is a really silly question, but how do I check if I'm uploading to the correct directory? I have a feeling this is where my problem is... how do I know which directory I am uploading to?
    Thank you again!
    Harriet.

  • SharePoint 2013 Apps shows 404 page not found on web front end servers.

    Hi All,
    We are implementing SharePoint Apps for our UAT environment with 1 application server and 2 WFEs. In our development server which is single server worked for implementing SharePoint Apps.
    All our web applications WFEs are hosted UAT environment and SharePoint Server 2013 is enterprise with this build number ​​15.0.4420.1017 (RTM). In the Application Server we enabled App management service and Subscription management through
    PowerShell.
    This DNS configuration is as follows:
    contoso.com with IP address for Application server (192.168.10.12) 2 different IP address for WFEs
      192.168.10.14/15).
    contoso-apps.com for wild card DNS required by SharePoint Apps and pointed to
    Application server (192.168.10.12).
    We have created self-sign certificate on one the WFE server, create a web application dedicated for SharePoint Apps
    without host header and bind the self – sign certificate to the SharePoint Apps web application. DNS is correctly configured on the WFE and we are able to
    ping abc.contoso-apps.com.
    The App Catalog site is working and we are able to download SharePoint apps. But for the WFEs, when go to SharePoint store 
    it does shows the content for Store and when download an app and click on Add IT and signed as Office ID we get 404 page not found.
    We referred the following sites that relate this 404 error:
    http://blogs.technet.com/b/sharepoint_-_inside_the_lines/archive/2013/06/23/404-amp-401-errors-with-the-app-management-service.aspx
    http://sharepointchick.com/archive/0001/01/01/setting-up-your-app-domain-for-sharepoint-2013.aspx
    http://absolute-sharepoint.com/2013/02/troubleshooting-setting-up-an-environment-for-apps-for-sharepoint-2013.html
    http://www.jeremythake.com/2013/12/troubleshooting-sharepoint-2013-hosted-apps-on-premises-404-not-found-error/
    https://samlman.wordpress.com/2015/03/01/planning-the-infrastructure-required-for-the-new-app-model-in-sharepoint-2013/
    But in my case we have already defined a blank host header for SharePoint Apps that we create previously.
    Is it because we not using latest patch as Steve Peschka that March PU fixed this issue?
    Any other solution we should look to fix this.
    Any suggestions would be greatly appreciated. 
    Sandy

    Your contoso-apps.com
    wildcard address should point to one of the WFE servers, not the Application server.  (Actually it should point to the load balancer for the WFEs, but you don't mention a load balancer.)  Apps generate a dynamic HTML web site on the WFE server.  If
    you point to the application server it may not be able to deliver that content if the Microsoft SharePoint Foundation Web Service isn't turned on.  (That's what makes a server a WFE)
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • Wwv_flow.accept, error 404 page not found

    I am trying to install the OEHR Sample Objects for the Hosted Demo environment at apex.oracle.com site so I can do the Oracle Application Express 2 Day + Tutorial. I downloaded the zip file and got the .sql file extracted ok. The import works ok for the application, but hangs when trying to load the Supporting Objects. It eventually gives me that nasty old error 404 page not found when on MS windows 2000 and IEexplorer 6 ( and a similar result in xp using IEexplorer 7).
    I cannot do much in the tutorial without the samples.
    Any ideas, anyone else gotten stuck here? Thanks

    Dimitri,
    Many thanks for the reply.
    The problem appears to be intermittent and can happen on, quite literally, any link or button. Anything which causes either a page submit or link through to another page is a likely candidate. And this isn't just whilst running the app - it's within the app design part, too. It seems to be an issue (possibly) with page delivery.
    My gut feeling is that it seems to happen more after the DB has been up for a while. However, this may just be a matter of perception as I've also had it happen within minutes of a DB restart.
    I'll have a play around with apex.oracle.com, but my suspicion is that the Oracle site works fine (this would be a far more visible error if it happened on apex.oracle.com, too).
    One thought is that it might be an EPG config issue - it'd be interesting to check the config of an Oracle-supplied Apex area, if that were possible. Another thought is that it could be the network, though (typically) everything else on the network appears to be running fine...
    Many thanks,
    David

  • Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

    Post Author: Alan Weiner
    CA Forum: Deployment
    We just did a fresh install of Crystal Enterprise 9.  When we try to run the Management console, we get an "Error 404: page not found"
      http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
      Error 404: The page cannot be found

    Post Author: Alan Weiner
    CA Forum: Deployment
    From the server (although, it uses a browser to connect)
    colin mackenzie:
    Hi Alan Weiner.
    Do you get this message when you run this from the server? or just the workstation / client browser?

  • Integration Directory : getting 404 Page not found error while accessing In

    Hello,
    When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
    Some Description
    - Executing sxmb_ifr,
    - From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
    erpsys07 -> Central SLD -> J2ee Port - 50100
    erpsys07 -> PI system -> J2ee Port - 50300
    When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
    http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
    Could some help me where to change and what to change?
    Thanks,
    V.SINGH

    Have you checked port in Netweaver Administration?
    See which port is mentioned there. (If you are using PI 7.1)
    Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
    Thanks,
    Hetal
    Edited by: hetal shah on Nov 24, 2009 4:49 PM

  • HTTP 404 page not found error !! on tabs

    Hello All,
    I am having a page with multiple tabs . When the user navigates from one tab to another tab ( using standard tab set ) from interactive report I am getting the HTTP 404 page not found error .
    The tabs are in the following fashion.
    home page#1
    varlist page#2
    criteria page#7
    dynamic report page#10
    interactive report page#15
    I can move forward by selecting the tabs but when i am in interactive report tab and select any of the other tabs i am getting HTTP 404 page not found error..
    Can any one help me .
    thanks/kumar
    Edited by: kumar73 on May 5, 2010 2:45 PM
    Edited by: kumar73 on May 5, 2010 2:46 PM

    Hello Jarola / All,
    Selected Pseudo Parent Tab: TS1
    Select Standard Tabs: DBTable, variables , condition , Report , interactive report.
    When I am navigating from tab interactive report to any other tab the url is chaning to
    http://cosmo:8080/apex/wwv_flow.accept - resulting in HTTP 404 page not found error ..
    but when navigating with in the following tabs
    DBTable page#1
    variables page#2
    condition page#7
    report page#10
    I am having different url like example -
    http://cosmo:8080/apex/f?p=125:7:1075354762414252::NO
    Can any one tell me why i am unable to navigate from interactive tab to other tabs ..
    ================================
    I uploaded the applicatoin in oracle.apex.com
    http://apex.oracle.com/pls/apex/f?p=29558:1:3623891857047276:::::
    please find the link above .
    ===================
    The database tables are huge and inorder for me to replicate at oracl.apex.com I got to load the full schema which is not possible . May be you can go through the code to understand whats going wrong.
    thanks/kumar
    Edited by: kumar73 on May 6, 2010 6:46 AM
    Edited by: kumar73 on May 6, 2010 1:00 PM
    Edited by: kumar73 on May 6, 2010 1:01 PM
    Edited by: kumar73 on May 6, 2010 1:04 PM
    Edited by: kumar73 on May 6, 2010 2:46 PM

  • Http 404 Page Not Found in 10.1.3

    I installed 10.1.3 and am going through a Faces tutorial, but when I try to run it, I get a 404 page not found error. Is there some configuration of the OC4J embedded server that I need to do? I've been using the 10.1.2 and I don't recall having to have made any changes.

    I tried creating a new project from scratch. JSF with 2 pages, one text output and one command button, return success and go to next page, about as simple as I could think to try. I get the same 'Page not found' error on this project as well. Also, when I create the first JSF page, the property inspector doesn't display any JSF components, even though the libraries were selected, until I exit and restart JDev. Then they show.
    Are there any known configuration issues with the OC4J? Should I just de-install/re-install JDev 10.1.3 all together?

Maybe you are looking for