Downloading and Installing Office Professional 2007 in Boot Camp

I purchased an electronic download of Office Professional 2007; however, I cannot locate any source in Boot Camp to use in order to open the application. Any help out there? I really appreciate it.

Do you know what the file extension is?
I don't know much, but I'm thinking it might be an .iso file (when I downloaded the office 2010 beta it was one). If you have an iso file then you need a special disk-burning program like Nero (in Mac you can use Disk Utility although I have heard it is unreliable) to burn it to a cd or dvd, and then install the program from the cd.
If it's not an .iso file then most likely I can't help you.

Similar Messages

If I erase and install will it remove my Boot Camp XP partition to?

Hi I got a new iMac at Xmas, 1st one ever, Im loving it!
Ive been messing about installing stuff, settings etc, I have set up my Boot Camp partition with X on and its working great. I havent run Time Machine yet as I knew I was going to be "testing" OS X out.
So what I really think I should do is wipe it all clean, get the OS X updates (v10.5.2 etc) and then do a backup and start afresh.But what will happen to my Boot Camp partition? will this get erased as well?
If so there is a free app called WinCLone that I could back it up with 1st I suppose, but am unsure if this works well?
So can someone help please? the only thing I need to backup ff OS X 1st is my iTunes music, as I finally have beenorganising it all with art, tags etc. this will just go onto a USB external HDD i have
cheers

I saw you said 32GB for your Boot Camp partition, I presume you formatted in FAT32. If this is the case, Winclone _will not_ work. It only works with NTFS partitions. I have used it before to resize my boot camp partition.
On a side note for anyone whom is trying to resize or change their file system on their BootCamp partition, your FAT32 partition can be converted to NTFS directly from Windows. This will allow the usage of Winclone (http://www.twocanoes.com/winclone/).
+1. Click Start, point to *All Programs*, point to Accessories, and then click *Command Prompt*.+
+2. At the command prompt, type the following, where drive letter is the drive that you want to convert:+
+*convert drive letter: /fs:ntfs*+
+For example, type the following command to convert drive E to NTFS:+
+*convert e: /fs:ntfs*+
+Note If the operating system is on the drive that you are converting, you will be prompted to schedule the task when you restart the computer because the conversion cannot be completed while the operating system is running. When you are prompted, click YES+
You can now use Winclone to make an image of the existing partition. Then use BootCamp to delete the existing partition and create a new larger partition.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

I purchased microsoft office 2011. I have downloaded and installed the software but at no time was I prompted to enter my product key. As a result I am unable to use the software. Please help me activate the software. Thanks

I purchased downloaded and installed microsoft office 2011 onto my iMac. At no time was I prompted to enter the product key so I am unable to activate the software. Can anyone tell me what to do in order to activate the software?

Welcome to Apple Support Communities
Where did you download Office for Mac? If you downloaded it from Microsoft, read > http://support.microsoft.com/kb/2391941/en-us

I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?

I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?

You can try:
creative cloud desktop failed to install
Downloading and installing desktop apps from Creative Cloud
Problems with Creative Cloud (apps not starting)
Hope it helps you.
Regards
Rajshree

Unable to boot computer iMac intel after downloading and installing latest iPad software

I downloaded and installed the latest iPad software and my iMac will now not boot up. The iMac was getting a little slow just prior. Is one year old and this is the first problem. I have put the system DVD in and rolled back a couple weeks. Still no start up.

Imayit55 wrote:
Sorry. I downloaded the latest iPad update through iTunes using my iMac. Then synced the iPad to update the iPad. Updated iPad is fine. iMac will now not boot up. I put the iMac osx install dvd disk in and used it to rollback two weeks. No help. I am now running the disk verify program from the osx install DVD
There is no rollback feature on the OSX disc (which version of OSX is this, Leopard, Snow Leopard?) so I am unable to understand this unless you are referring to a restore from Time Machine, is this what you did?

I am trying to download and install Firefox 4. 0. 1. The download works, but what I am supposed to do to install it? If I shut down and re-boot I am prompted each time to download the same update. Thanks - PM

Firefox prompts me that I need to download and install an update. This I do, and it downloads, but I don't know how to install it. This might be happening automatically, but when I shut down and re-start, I get the same message about installing the same update. Unless I can resolve this, I will have to return to Internet Explorer... What can I do?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop and close Firefox.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Trouble with downloading and instalation Off Prof Plus 2013

Bought the download version of Office Professional plus 2013 via my work. Downloading it on my Windows 7 Home premium machine does not seem to work.
at 87% download it stops completely
"foutcode 30102-11"
What have I tried so far:
restart
removing the half installed program, restart and retry
removing the half installed program, restart, shut down firewall and retry
removing the half installed program, removing all other office stuff, restart, and retry
removing the half installed program, removing all other office stuff, restart, shut down firewall and retry
yelling!!
The result =
at 87% download it stops completely
"foutcode 30102-11"
What to do next?

Hi Rob,
Thank you for your question.
I've noticed that you mentioned "removing all other office stuff", so you've installed other Office products on the same machine previously?
Older version of Office product sometimes has an impact on your installation. If this is the case, I would suggest we first run
Microsoft Fix It tool
to remove any trace from older version of Office, then try again.
Also, when the installation get stuck at 87%, go to Control Panel\All Control Panel Items\Programs and Features and see if the Office instance has been created in the list. If yes, please try to right click it, select "Change", then repair Office
2013 and see if this will fix the issue.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

My updates are failing. Adobe application manager may be damaged. I have downloaded and installed a new copy and the problem persists.   Please help.

I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!

reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.

After upgrading to 3.6.8 our desktop will no longer connect to our DSL system. It downloaded and installed the upgrade then refused to connect. Help!

Background: our desktop computer started shutting off sporadically. I researched the problem, reset the memory chip, checked battery voltage on the motherboard (it was okay), resinserted the battery and tried to boot. It started up successfully and connected to the internet via our DSL line. FF had trouble opening pages due to security certificates so I checked to see if upgrades were available (3.6.8 was) and I downloaded and installed it. After that it refused to work. Apparently a setting somewhere got changed but I don't know what it might be. The DSL connection works with other computers which are wireless (the desktop has a hard connection.) Operating system is Windows XP. Other browsers do not work.

Turn off your firewall and antivirus software.

The Safari on my iMac is no longer supported, how can I download and install a new version?

The Safari browser on my iMac OSX 10.6.8 is no longer supported. How can I download and install a supported Safari browser?

If you’re running Safari 5.1.10, you need to either upgrade the computer’s OS or switch browsers.
To upgrade, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(123754)

Install Office Enterprise 2007 on win 8.1 faild

I try install Office Enterprise 2007 on win 8.1 on a new pc with win 8.1
The process starts and after 10 minutes
got stuck, there is an error message
What to do?
Baruch

Hi,
It is compatible with Windows 8.1:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Microsoft%20Office%202007%20Enterprise&vendor=Microsoft&ModelOrVersion=12&Type=Software
so, what’s the error message?
Alex Zhao
TechNet Community Support

I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?

I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?
I didn't see this update come up in "Software Update"
If I was not meant to install this update, would it cause ANY damage at all to my mac ( this is my second as I dropped the first )
If I were to re-install ML would this fix any errors that this may have caused ?
The bottom of the page I link to says:
Boot ROM or SMC Version Information: MM51.0077.10
But when I click on "About this Mac" it says:
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.75f0
What does the additional "B" mean?
My mac mini is the Mid 2011 Model.
I am sorry if I am sounding super paranoid about this, but I don't want to have caused any permanent damage.

Hello,
It's somewhere between almost impossible & impossible to install the wrong EFI Update with all the checks it does!
Mac mini (Mid 2011) with Intel graphics
Macmini5,1
MM51.0077.B10 (EFI 1.6)
Mac mini (Mid 2011) with Radeon graphics
Macmini5,2
MM51.0077.B10 (EFI 1.6)
Mac mini Server (Mid 2011)
Macmini5,3
MM51.0077.B10 (EFI 1.6)
http://support.apple.com/kb/HT1237
Not sure what the B means.
If I were to re-install ML would this fix any errors that this may have caused ?
No, Firmware is unaffected by any OS change or re-install.

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again

Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Downloading and Installing Office Professional 2007 in Boot Camp

Similar Messages

Maybe you are looking for