Downloading and Installing Quicktime

Well, normally I wouldn't download this program but I am editing a video with Sony Vegas, and the clips I have require me to download QuickTime. There's only one problem, I uninstalled QuickTime before and now it's not allowing me to install the new version of QuickTime because it can't delete the old files. Thank you Apple for failing me once again.
Does anyone have any idea of what to do?

The place to seek answers to your problem is in the Quicktime for Windows forum:
http://discussions.apple.com/forum.jspa?forumID=943

Similar Messages

I have downloaded and installed "QuickTime player 7 for windows" but iTunes insists that i didn't and i need to download install

ok i recieved the jurassic park blu ray triliogy with digital copy. i put in the code and after it was done downloading it said it could not play nor sync into my ipod touch 4th gen as didn't have Quick time installed but as the topic states i have already downloaded and installed it so what do i do or whta happened and how can i fix it so i can just watch my movies. also i am running on windows 7

Your UserAgent string in Firefox is messed up by another program that you installed.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox

Do I need to download and install quicktime with 10.5

Is it necessary to install quicktime with the 10.5 version of iTunes?

Is it necessary to install quicktime with the 10.5 version of iTunes?
You might still need it in order to play some older media files. See the following document:
iTunes 10.5 for Windows: Older media files may require QuickTime
... but otherwise you should be fine without the QuickTime Player application on the system.

Can anyone help? I have downloaded and installed the QuickTime MPEG-2 Component but it doesn't work.

I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
I have rebooted several times, reinstalled both Quicktime and the MPEG-2 component and still nothing. I have then spent ages going around and around in circles on the website trying to find a way of emailing customer services or technical support to get some assistance but I just always end back in the same place no further forward.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!

I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
1) Suggest you reread the "Feature" details for the QT MPEG-2 Playback Component paying particular attention to the paragraph titled "Can transport streams be played?" which clearly states that this codec does NOT support the playback of transport stream (TS) files.
2) This codec can only be used with "classic" QT apps such as the QT 7 player, GarageBand, or third-party apps like the free MPEG Streamclip app.
3) The VLC player intrinsically supports TS files. MPEG Streamclip with the QT MPEG-2 Playback Component installed supports TS file playback.
4) MPEG Streamclip with the QT MPEG-2 Playback Component installed can also resave muxed TS file content as muxed program stream (PS) content which is then "playback" compatible with both QT 7 and QT X players (assuming you select an audio compression format compatible with both) or convert the muxed TS content to QT "edit" compatible compression formats if desired.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!
Apple seldom makes refunds to people who successfully purchase software which they do not really understand how to use—cavaet emptor. It is difficult to make suggestions here without knowing more about your personal preferences and/or work flow requirements. I personally would keep the codec to enhance various playback, conversion, and editing options on my Mac.

Downloading and installing windows media components for quicktime

I am relatively new to Mac and haven't really installed much other than Handbrake. I was trying to install windows media components for quicktime or even windows media player for quicktime in order to play .wmv files. However, anytime I click to download something, NOTHING HAPPENS. No download appears, nothing goes to my download stack, nothing installs. Is there something I need to know when attempting to download and install something on my Mac that I may not just know coming over from the dark side of windows?
any help is appreciated

Yes, good advise...Flip4Mac is essential for WMV content. Here's a list of other things you might need for the various formats out there.
VLC
Real Player
Perian
Adobe Flash
Streamclip

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR

I just downloaded and installed the 64bit itunes, but I get an error 2 "Apple application support required to run Itunes, uninstall and install again" I did that twice and got the same result

I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.

Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit).

After downloading and installing the 64-bit version of iTunes for Windows I get a "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone to synch it I get a message that says that I don't the 64-bit version??

After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed. Run the installer to remove iTunes, then install the 64-bit version of iTunes". I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties). Same result each time!!! Any ideas????

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Downloading and installing itunes

when ive tried to download and install itunes
it downloads ok but when i try to install itunes i get this pop-up saying "this installation package could not be opened.
Verify that the package exists and that you can access it
or contact the application vendor to verify that this
is a valid windows installer package"
can someone please help me!
its so annoying

hi ta48!
QuickTime version 7.0.2 is installed, iTunes requires QuickTime version 7.0.3 or later. Please reinstall iTunes.
hmmm. for that one first try a careful standalone QT 7.0.3 install.
download and save a copy of the standalone QT 7.0.3 installer to your hard drive. (we'll run the install from there rather than online.) switch off any antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
if you get an error message on the standalone, let us know what it says. (include error message numbers if you're getting any.)
if the install goes through, will your itunes open properly?
love, b

Downloading and installing itunes 6

After receiving an upgrade notice from iTunes I downloaded and installed iTunes 6. When I attempt to run it, I continue to get a message,"QuickTime version 7.0.2 is installed, iTunes requires QuickTime version 7.0.3 or later. Please reinstall iTunes." I attempted to reinstall and was given 2 options: "Repair" (reinstall all program features installed by the previous setup) OR "Remove" (remove iTunes). I selected "Repair". After doing this I continue to get the same message about QuickTime 7.0.3 and to reinstall iTunes. Should I select "Remove" (remove iTunes)? And if I do will I lose my library of downloaded songs?

hi ta48!
QuickTime version 7.0.2 is installed, iTunes requires QuickTime version 7.0.3 or later. Please reinstall iTunes.
hmmm. for that one first try a careful standalone QT 7.0.3 install.
download and save a copy of the standalone QT 7.0.3 installer to your hard drive. (we'll run the install from there rather than online.) switch off any antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
if you get an error message on the standalone, let us know what it says. (include error message numbers if you're getting any.)
if the install goes through, will your itunes open properly?
love, b

When I try to download and install itunes

When I try to download and install intunes it gets to after it installs quicktime and then says it cant go any further because the itunes.cab file is corrupt, what do I do I need my itunes.

Have a bit of patience. No one here gets paid to help; we're all just fellow users assisting as we have time, knowledge and inclination. It may well take a bit of time before someone who might have a suggestion sees your post and responds; certainly more than the nine minutes which is all you allowed before you posted a second time. Posting back that quickly will be considered rude and will put people off from wanting to help you. Give it some time and with luck someone will have an answer for you.
If you haven't already, try downloading the iTunes installer again from Apple and give that new copy a try. You may just have a corrupted or incomplete download.

Do I need to download and install JSSE

Hi all,
I have tomcat 5.028 and JDK 1.4.028 if I want to us essl should I still need to download and install JSSE?
thank you

Is it necessary to install quicktime with the 10.5 version of iTunes?
You might still need it in order to play some older media files. See the following document:
iTunes 10.5 for Windows: Older media files may require QuickTime
... but otherwise you should be fine without the QuickTime Player application on the system.

I have ios 5.1.1. When I sync to iTunes, my purchased apps no longer work. They blink but do not open. The only way I have been able to solve this, is as follows: I delete one of the apps and then re-download and install it. Then, all my apps work.

My new iPod touch 64 Gig has a problem after syncing with iTunes. My purchased apps no longer work. I touch them and they seem to try to open but they do not.
The only way I have found to fix this is as follows:
I delete one of the purchased apps. Then I go to the App Store and re-download and install the same app. After that, all my apps work again.
Please help.

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

I have low C disk space. Want to install Ai Trial. Not enough Space. But have a huge space of G: drive. How I can direct install to download and install on other than C: drive?

I am short with C: Drive space. Cannont Install Ai Trial. How I can download and Install on other than C: drive? I am trying to download it through Creative Cloud as a subscriber.

Thanks for help. It worked. Now up and running Ai.
Sent by:
Khalid Hameed
London - UK

Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support

Downloading and Installing Quicktime

Similar Messages

Maybe you are looking for