Downloading Aperture has slowed down photo editing on my iMac.  Should I delete iPhoto?

Downloading Aperture has slowed down photo editing on my iMac.  Should I delete iPhoto? 

So it was only the initial preprocessing after an import of a complete library. If your system drive is nearly full, you should expect performance problems. Try to free at least 20% of your drive.
I would try to keep your iPhoto Application - it is only 1.1 GB and you may need it later; but you can safely delete the iPhoto Library once you are sure, you imported it successfully. iPhoto can do some things Aperture cannot - e.g. greeting cards, calendars. And it is always nice to have a second application for testing purposes, if something should go wrong.
But make a backup copy of the iPhoto Library, just in case. Sometimes you will notice years later that a single image not imported correctly, and then you will be glad you still have a backup of the original iPhoto library.
Regards
Léonie

Similar Messages

  • I seem to be having an issue whenever I open up a new page other sites keeping appearing and the pc has slowed down to a halt. What should i do to restore back to normality?

    I foolishly opened a free online movie site and since then my pc has slowed down and i keep getting other sites popping up constantly.
    What should i do??

    There is no need to download anything to solve this problem.
    You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
    Back up all data before making any changes.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
    Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • My MBP (2012) has slowed down substantially after Yosemite installation, what should i

    Hi All,
    I have a 2012 MBP, which used to run smooth as silk, but it has dropped down to a snail pace after upgrading to Yosemite. I'd appreciate recommendations on how to re-store, kill malware, etc based on my machines diagnostics reported below:
    Problem description:
    Slow macbook Pro (2012) after Yosemite upgrade
    EtreCheck version: 2.1.8 (121)
    Report generated March 29, 2015 at 7:16:22 AM GMT+11
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 584
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 18 days 0:18:6
    Disk Information: ℹ️
        ST9500325ASG disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (63.09 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.2.48 - SDK 10.6) [Click for support]
        [not loaded]    com.nike.sportwatch (1.0.0) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.6) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.4) [Click for support]
        [not loaded]    net.Thomson.iokit.USBLAN_usbpart (1.6.0) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.2.48 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.2.48 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.2.48 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.2.48 - SDK 10.6) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.rcd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        6 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AirPlayXPCHelper.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        8 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.bombich.ccc.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        BitTorrent    Application  (/Volumes/BitTorrent/BitTorrent.app)
        Nike+ Connect Helper    Application Hidden (/Applications/Nike+ Connect.app/Contents/Resources/Nike+ Connect Helper.app)
        EvernoteHelper    UNKNOWN  (missing value)
        KiesViaWiFiAgent    Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
        fuspredownloader    Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 11.1.102.55 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 11.1.102.55 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        CitrixICAClientPlugIn: Version: 11.4.0 - SDK 10.0 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Searchme [Adware! - Remove]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            28%    Google Chrome
            17%    WindowServer
            13%    sandboxd
             3%    sysmond
             2%    Dock
    Top Processes by Memory: ℹ️
        168 MB    Google Chrome
        99 MB    Finder
        92 MB    Google Chrome Helper
        64 MB    mds_stores
        64 MB    WindowServer
    Virtual Memory Information: ℹ️
        77 MB    Free RAM
        1.27 GB    Active RAM
        1.22 GB    Inactive RAM
        1.13 GB    Wired RAM
        72.14 GB    Page-ins
        1.29 GB    Page-outs

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Since installing Maverick, speed has slowed down considerably. Not able to export photos form email to iphoto. What is going on?

    Since installing Maverick, speed has slowed down considerably. Not able to export photos form email to iphoto. What is going on?

    When did you install?
    Spotlight will need to re-index the entire system so that can cause slow performance if you updated recently. It can take many hours on a large disk with a lot of data. Click the Spotlight menu, it should say if it is still indexing.
    There is no point trying to fix anything whilst this is ongoing, because it may just speed up when complete.
    Are you able to drag photos from email to the Desktop or to iPhoto's icon? How about the 'File menu > Save attachments' option?
    Please clarify what you have tried, otherwise we may waste time on the wrong thing.
    If the system is generally unstable there are other things to try too, such as safe boot.
    https://support.apple.com/kb/HT1455
    That will isolate all third party software, if the Mac is able to do the things that didn't work it suggests that you have software that is loading at startup or login. The easiest way for us to see these is if you download EtreCheck & generate a report.
    Post the report here & we can try pointing to items that you can either update or remove.
    http://www.etresoft.com/etrecheck

  • HT6001 my mac has started freezing and suddenly shutting down on me it seems as if every process has slowed down since downloading this last update of 11.1.4, any solutions? Because it shut down in the middle of a test twice now, saying keyboard issue.

    my mac has started freezing and suddenly shutting down on me it seems as if every process has slowed down since downloading this last update of 11.1.4, any solutions? Because it shut down in the middle of a test twice now, saying keyboard issue.

    What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

  • Ever since I downloaded Mountain Lion my computer has slowed down and frozen at times. Is there anything I can do to speed it up?

    Ever since I downloaded Mountain Lion my computer has slowed down and frozen at times. Is there anything I can do to speed it up?

    How much memory is installed?
    Here is a large list of articles related to performance issues:
    https://discussions.apple.com/docs/DOC-3521
    http://www.reedcorner.net/mpg/
    http://support.apple.com/kb/PH10798
    http://osxdaily.com/2012/10/11/mac-running-slow-reasons/
    https://discussions.apple.com/thread/4542409?start=0
    https://discussions.apple.com/thread/4122175?start=0
    http://www.speedtest.net/index.php
    https://discussions.apple.com/thread/3289614?start=0
    https://discussions.apple.com/thread/3928756?start=0
    http://www.whyismymacsoslow.net
    http://www.slowmac.net
    http://www.all-about-apple.com/slow-mac-performance-learn-how-to-solve-it/
    http://www.chriswrites.com/2009/04/17-reasons-why-your-mac-is-so-unbelievably-sl ow/
                                                                        http://www.macworld.com/article/1159699/troubleshooting_speed_passwords.html

  • Why has the download/buffering speed slowed down for videos?

    Why has the download/buffering speed slowed down for videos?
    What can be done about it?
    TIA,
    R. Ober

    The problem is with your router, your internet service provider or you have a marginal connection with your router.
    Locate your iPad close to your wifi router and see if the problem persists.
     Cheers, Tom

  • My mid 2011 MacBook Air has slowed down significantly overnight?

    Last night my MacBook Air was working fine.
    When I went to use it this morning, it has slowed down significantly. It takes awhile for it to respond to trackpad movement or the keyboard. Opening finder is delayed now, opening any app is delayed now. Booting it back up takes extra long now, probably around a minute compared to thirty seconds before.
    I've tried an SMC reset, repairing the disk and repairing disk permissions.
    From what I can see, the hardware doesn't appear to be failing, but I could be wrong.
    Can anyone help me out? What could possibly be going on with my MacBook? How did this happen overnight?

    Your MacBook Air's memory is not upgradable, and as you already determined unused storage capacity is not a relevant factor.
    There are many reasons a Mac may be performing slower than expected.
    Back up your documents and everything else important to you before proceeding.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    To identify potential hardware problems: Apple Hardware Test.

  • IPad 2 has slowed down copy paste is not working it hangs when filling in user name , please do something to solve all these problems ,Apple please wake up

    IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast

    Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
    Go to Settings>Safari>Clear History and Website Data
    Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
    Restore iPad to Factory Settings
    http://support.apple.com/kb/ht1414
    Download Past Purchases
    http://support.apple.com/kb/ht2519

  • Since installing Leopard (OS X 10.5.8) everything has slowed down.

    Since installing Leopard (OS X 10.5.8) everything has slowed down. From powering up to powering down and everything in between, the computer has slowed down. A friend said every video I've watched - not necessarily downloaded - is on the hard drive and if I clean it up, that might help. But I don't know. I was using Tiger and everything was fine.

    Hello, When I clicked on ABOUT THIS MAC, then MORE INFO, I got this:
    Model Name: PowerBook G4 15"
    Model Identifier: PowerBook5,6
    Processor Name: PowerPC G4 (1.5)
    Processor Speed: 1.67 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 1 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.1f3
    I don't know how to tell how much memory is being used, but I don't have that much on it. I have quite a few icons sitting on the desktop and I've never done any maintenance, it never needed it so far. I've owned this computer almost 3 years. I bought it used, still under the 2 year AppleCare.
    Thanks,
    Dennis

  • New Mac has slowed down dramatically

    My mac is only a few weeks old and I have noticed that it has slowed down dramatically. It takes quite awhile for programs to load. The fill-in boxes are not keeping up with my typing and it is getting quite annoying. I am new to Imac, so I am not sure how to go about checking the processing speed, etc. Any help would be appreciated.

    Check out this thread:
    http://discussions.apple.com/thread.jspa?messageID=7114123

  • I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly.  All I see is that whirling circle every time I do anything.  How do I go back to old OS.  Terrible upgrade -- forces you to buy a new Mac!!!!

    I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly.  All I see every time I do anything is that crazy circle going round and round.  I don't recommend you upgrading.  How do I get rid of it.  I believe it forces you to buy a new macbook!!!!

    It does not. First things first have you tried restarting?
    Try restting PRAM
    http://support.apple.com/kb/HT1379
    Try booting up in Safe Mode
    http://support.apple.com/kb/HT1455
    Also open "activity monitor" and look and see what is using a lot of processing power.

  • System has slowed down considerably after updates from Apple. Is SyncServer the culprit?

    I use MacBook with preinstalled OS Leopard since April 2009. I have also regulalry updated my computer system using the Software Update application. However, since my last update on 12th Aug 2011, I have noticed that my system has slowed down. There is long pause between every character I type, delay in switching applications, battery dries out quicker, slow response to every command.
    I have started facing this problem after updating following software like iTunes 10.4, Safari 5.0.6, Migration Assistant Update for MAC OS Leopard & Quick Time 7.7 from Software Updater. Although, my OS is still leopard.
    I noticed on the Activity Monitor that syncserver is using majority of my RAM and reappers even if I stop the process. Some of its subprocess like AddressBookSync also appears and consumes lot of memory. Is this the problem? Though, I never noticed earlier what size it consumed.
    I use Microsoft Office suite for Mac and have also checked and deselected all sync services. Yet, the Process (PID 305) continues to appear in Activity Monitor.
    I am no techie, and would appreciate quick help to resolve this issue.
    Thanks!

    I was just about to write the same problem, but I don't have VMware; my laptop is late 2008 was running Snow Leopard (uptodate version).
    I've scientific softwares so probably would require a clean re-installation of ML. I MUST MENTION HERE that those software which were written for PPC will NOT work on ML. Just found out that one of my important softwares version won't work on ML; need $500  to upgrade that software .
    Therefore, I'd also want to know how can I go back to SL.
    I'll let you know how clean re-installation has worked.

  • Mavericks has slowed down my Mac. Some function in Mail don't work !

    Mavericks has slowed down my Mac. I cleaned it but to no avail. Also Mail does not work well. Attachment picture cannot be exported to iphoto. Pretty disappointed !  Can anyone help. Thanks

    Mavericks has slowed down my Mac. I cleaned it but to no avail. Also Mail does not work well. Attachment picture cannot be exported to iphoto. Pretty disappointed !  Can anyone help. Thanks

  • Browser based InfoPath Forms in SharePoint 2010 performance has slowed down after SharePoint 2010 SP2

    hi All,
    Our Browser based Infopath forms have slowed down drastically after applying SharePoint 2010 SP2. Prior to this, we had SharePoint 2010 SP1 and the timings was around 10 seconds (single user) for the entire infopath form to be displayed which has 10-12
    views and 5 data connections and 15 business rules and around 100 fields.
    But now after applying sharepoint 2010 sp2, the performance has slowed down and it now takes for a single user around 50 seconds.
    Refer to the link below, which we followed by applying the patch as well, but the performance is still the same very slow.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/0b673324-01c4-49f7-86cb-647aa43fefd6/infopath-browser-forms-extremely-slow-after-service-pack-2-upgrade?forum=sharepointadminprevious
    We have raised a ticket with Microsoft, but there is no concrete resolution as to what component of the infopath has made the form rendering and display slow.
    Can someone point me to the right resource or knowledge base where i can do a kind of debug, which tells me exactly which infopath dlls are the issue or which part of my form is taking more time. I am using AOLPageTest and Fiddler, but they do not give me
    any details where exactly is the bottleneck.
    Any tools that give me the details of the bottleneck.
    Thanks and appreciate your help in this.
    Regards
    Ram
    Thanks Ram

    hi inderjeet,
    The application has gone live and its on production, the same application is on pre-prod and UAT, system testing and integration environments.
    The infopath form used to work very well on all these environments before we installed sharepoint 2010 sp2. but the moment we installed sharepoint 2010 sp2, the infopath forms have slowed down.
    Microsoft has acknowledged that there is an issued with sharepoint 2010 sp2 and infopath form performance, but they are not able to provide an appropriate fix on this.
    We have another environment where there is no sharepoint 2010 sp2 applied only sp1 is applied and the infopath form works very well within fraction of seconds.
    So your point no. 1 and 2 and 3. does not reveal anything. Fiddler does not give any detailed component by component breakup where the time is taking more.
    The form used to work very well before we applied sp2.
    I want to know a tool that gives me exactly component by component grant chart kind of breakup of time taken when the infopath url is requested on the browser.
    Thanks
    ram
    Thanks Ram

Maybe you are looking for

  • Importing a CSV file into AD 2012r2

    Hi Guys Just wondering if anyone can help, I am a newbie on scripting and finding it really difficult to understand how to import a csv file into AD I have created the CSV file with the following headers, see below but I am unable to write a powershe

  • Attempting to open a single bookmark opens 24 - is this a virus?

    Attempting to open a single bookmark instead goes to Firefox index and tries to open 24 bookmarks all at the same time.

  • SELECT by SDO_GTYPE

    Is it possible to select geometries in a table based on their geometry type (SDO_GTYPE)? Perhaps it's just my lack of experience in building SQL statements, but I can's seem to find a way to do it. e.g. I would like to select all polygons using somet

  • Via Floppy 64 bit driver

    Hi anyone know where the link is to create the SATA driver for F6 / S for the 64 bit version of Windows please I had it from here before but Can't find it now, the first copy I had got damaged and became corrupt. Many Thanks

  • Ipv6 address setup in local zone

    I'm having problems with a local zone that needs a defined IPv6 address. I've had a number of issues -- now i'm down to routing. I've set up a manual address on a physical interface, and assigned it to a zone by setting it from the global zone: ifcon