Downloading coldfusion-801-win64.exe
I seem to have misplaced the 64bit installer for CF8.01 and I need to go from 32bit to 64bit server ... I tried the regular install but it didn't work and I don't want to fool around with IIS7.5 compatibility options. I'm getting 404.3 error, the MIME type is not set. I guess there might be other problems.
I tried searching Adobe, but can only find CF9 downloads now.
Does anybody have a 64 'coldfusion-801-win64.exe' that I could download?
Thanks
Mark
I searched and searched for that link, couldn't find it anywhere!
THANKS!!!
Mark
Similar Messages
-
Looking to upgrade from 8.0 to 8.0.1.
ThanksHow to get CF8.0.1 installer?
Login here like your going to download CF10:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion
Then change URL to following and download / save file when prompted:
http://trials.adobe.com/Applications/ColdFusion/801WWE/coldfusion-801-win64.exe
HTH, Carl. -
Where do I download ColdFusion Builder 2?
I have several licenses for ColdFusion Builder 1 and I also have upgrade licenses for ColdFusion Builder 2. I have a new team member who needs to download ColdFusion Builder 2 to make use of this license. Now that ColdFusion Builder 3 is release, all of the downloads links I have been able to find point to the new version. Where can I find a download link for the previous version for which I have a valid license? Surely there is an archive download somewhere, but I cannot find it.
Thanks,
EricHere is the download link for ColdFusion Builder 2 http://download.macromedia.com/pub/coldfusion/updates/10/installers/cfbuilder201/ColdFusio nBuilder_2_WWEJ.exe .
Carl Von Stetten wrote:
Sometimes that address can be a bit flaky. I think it's an alias for [email protected] (note the single "l" at the end of "cfinstal". Next time I'll just suggest that address instead.
-Carl V.
The correct email addresses are [email protected] OR [email protected]
~Carl V: Thanks for trying
Regards,
Anit Kumar -
Can't download ColdFusion Server 11 without Akamai Download Manager??
WTF, Adobe??
Why are you insisting that I use the Akamai Download Manager (which I never trust download managers) in order to download anything???
Based upon advice of others, I have attempted to bypass it by clicking on the "File 1 of 1" link. But that doesn't give me the CF 11 installation file. It still links to "Adobe ColdFusion 11 - AkamaiDLM.exe".
WHY CAN'T I DOWNLOAD ANYTHING WITHOUT THE DLM????????????????????
^_^BlueDragon is better than ColdFusion? HAHAHAHA
In all seriousness:
The download manager is in place because the ColdFusion install file is
rather large and to give the quickest download times, it's hosted
through Akamai CDN. This allows the best global download speeds.
However, as it's a large file, the download manager makes sure all the
right pieces come down in the right order. It's not an intrusive
application.
DW
WolfShade <mailto:[email protected]>
Tuesday, March 10, 2015 10:41 PM
>
Can't download ColdFusion Server 11 without Akamai Download
Manager??
created by WolfShade <https://forums.adobe.com/people/WolfShade> in
/ColdFusion/ - View the full discussion
<https://forums.adobe.com/message/7275920#7275920> -
I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.
22020134.exe is the file Adobe say you must download and run to instal Acrobat 7.0 Pro. I went through the process, the one described in your link, I downloaded the file, ran it, it runs well, except it tells me my serial number is invalid. Now what? Does this mean I now have to discard my Adobe Acrobat 7.0 Professional and start again with a $500 purchase? All I want to do is transfer what I have to another computer.
-
How to download SAP IGS setup.exe for IGS installation?
Hi,
For installing IGS, i tried to download SAP IGS setup.exe from
"<a href="http://www.service.sap.com/patches">http://www.service.sap.com/patches</a>--> Support packages --> Entry for application group --> SAP IGS"
I am able to get '<i><b>.SAR</b></i>' file and '<i><b>IGS installation guide</b></i>', however i could not find '<i><b>.exe</b></i>' file for installation.
Can any one please guide me in this regard.
Regards,
Aparna .PAparna,
Find SAR archiver sofware on SAP Service Marketplace. SAR is just kind of archive file.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com -
I downloaded the iCloud installer exe. but the installer does not run?
I downloaded the iCloud installer exe. but the installer does not run?
Hi,
Please also try right-clicking on the installer and '''Run as administrator'''.
[https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Windows Installation] -
Download j2sdk-1_4_0-win.exe
have any other server where I can download j2sdk-1_4_0-win.exe? (except sun)
~Hillsure. search on google for the filename.
http://www.google.com
tobias -
Where can I download coldfusion Builder 2.0.1 plug-in
Where can I download coldfusion Builder 2.0.1 plug-in
Dowload the standalone installer. When you run it, it will ask if you want to install standalone or as a plug-in to Eclipse.
-Carl V. -
Trouble Downloading Coldfusion
Hello, I am attempting to download the trial version of Coldfusion (what I really want is to download the free Developers edition of Coldfusion 9), from this link: https://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion
Well, I am logged in to my Adobe account, and when I visit that page, it asks me for some information, such as my first/last name, organization name, address, etc. After answering all of the questions, I receive the error "An error has occured. Please try again." It doesn't say that any of the fields I have entered are incorrect, or left blank (just to test this, I left some blank, and it will then have an error message stating that some fields were left blank).
Does anyone know a way I could get around this, so that I am able to download Coldfusion 9?
Also, a little information about the systems I have tried this on. I have attempted to download Coldfusion 9 on both Windows XP (32-bit), and Windows 7 (62-bit). Using both Firefox and Internet Explorer on both systems. All pathes have came to the same result.
Thanks,
Alexaloney1 wrote:
Hello, I am attempting to download the trial version of Coldfusion (what I really want is to download the free Developers edition of Coldfusion 9), from this link: https://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion
Well, I am logged in to my Adobe account, and when I visit that page, it asks me for some information, such as my first/last name, organization name, address, etc. After answering all of the questions, I receive the error "An error has occured. Please try again." It doesn't say that any of the fields I have entered are incorrect, or left blank (just to test this, I left some blank, and it will then have an error message stating that some fields were left blank).
Does anyone know a way I could get around this, so that I am able to download Coldfusion 9?
Click on the very link you yourself have posted above. The most the download page will ask of you is to log in using the same username and password that you had used earlier to enter this forum.
Another strategy altogether: use those login credentials in a different browser. -
Mini ipad is disabled and I downloaded Itunes but the exe file will not run
mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Hoe kan ik mijn duur gekocht programma toch op mijn PC krijgen en wanneer gaan bedrijven als Adobe eens eenvoudige en goed begeleide downloads ontwikkelen en VOORAL wanneer gaan ze eens het nodige doen om hen op eenvoudige manier te kunnen contacteren
you need both file 1 of 2 (the 7z archive) and file 2 of 2 (the exe extractor).
download both, put them in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylewHi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.
I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it. -
Error in downloading itunes in windows, all the .exe files turn into the itunes icon
Download the lnk registry fix from www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. Reinstall iTunes. Should you find that all of your desktop shortcuts have again turned into links to the iTunes application apply the patch.
For further advice see Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
When I click on 2014 month view in calendar iPhone 5 s stucks, lagging. What is the problem I don't know????
-
Adobe premiere Elements 12 will not open editor
I had Adobe Premiere Elements 11 on my laptop and worked fine. Decided to upgrade to Elements 12 and did but version 12 will not open editor, says sign in, I sign in but no editor. Organizer opens and loaded my Photos and videos. I purchased full ret
-
I hope someone can help with this. I'm trying to create a dynamic site using dreamweaver CS3, with php5 and mysql5 in the background but I'm having difficulty with recordsets disappearing from the server behaviour menu when tweaking the code to allow
-
Syntax error when creating input-ready query
Hi, When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer. When I execute the query, I get the following error: Syntax Error in : CL_RS
-
N73 - 'contact' font size too small!
very difficult to read the data like phone number etc (even at my age!!!)when a contact is open. any method to get bigger font? IDEAS!!!