Downloading file in specific folder not possible
When I use the standard Settings in FF901 (Win7 64bit home premium) under "General" downloading files to the standard folder c:\user\username\downloads - there is no problem. When I choose "ask every time where to download" the downlaod box closes, I can' t choose a download folder and the file ends up in c:\user\username\appdata\local\temp as e.g. AXiXgx4C.exe.part". I checked this file,it's fully downloaded and after deleting "part" it works. I tried suggestions like "disable virus scanning in Firefox preferences" and disabling the virus protection of NOD but it didn't help. Only help was restarting Win7, but then after a while I ran into to the same problem again.
What to do?
Thank you for your reply. I searched in different forums and obviously this problem is known among firefox users. A simple but effective solution was to deinstall Firefox completely and also delete the profiles folder and profiles.ini. I also deleted temp files and remaining mozilla folders.
Now after a clean reinstall everything works again.
Similar Messages
-
To relocate mail.log, mail.log_current file to specific folder
Hi
We have configured CommSuite 6 in single host. The output of imsimta version:
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
libimta.so 7.0-0.04 32bit (built 01:01:00, Jun 20 2008)
Using /opt/sun/comms/messaging/config/imta.cnf
SunOS mail 5.10 Generic_120012-14 i86pc i386 i86pc
Output of imta_tailor file:
IMTA_USER=mailsrv
IMTA_USER_USERNAME=nobody
IMTA_WORLD_GROUP=mail
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.log
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder.
After above setting we cannot be able to relocate above file.
Pl. help us.
Thanks
P.K.world.group wrote:
We have configured CommSuite 6 in single host. The output of “imsimta version”:Please note that CommSuite 6 update 1 is now available and it is advisable that you upgrade using the "commpkg upgrade" command.
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.logThese parameters are now ignored as per the Messaging Server 7.0 release notes:
http://wikis.sun.com/display/CommSuite6/Messaging+Server+7.0+Release+Notes#MessagingServer7.0ReleaseNotes-Ignoredimtatailorsettings
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder. You can relocate the MTA log directory through the use of symlinks.
Regards,
Shane. -
Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!
I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size. -
my dear,
please help me to make synch between my computer and iphone , on the file tab it is not possible to click.
appreciate your help and thanks in advance.
regards
heshamYou can't
Apple has never approved a method to downgrade iOS
Allan -
The dmg files have downloaded to the wrong folder - not finished with the install process
The dmg files have downloaded to the wrong folder - I am at the part of the download/install process where the "Welcome" screen appears asking for me to agree to the license agreement. Somewhere on your site, I read that they should NOT go to the applications folder but to the "Users" folder. Can/should I move/drag the folder with the dmg files into the "Users" folder"? If so, before or after I complete the install? I am running MAC OSX 10.7.4 on a MAC Mini.
Also, when the trial period is over, I will use the license number for the purchased software disks, should the dmg's/folders then be moved to the application folder or stay in the "users" section? I have Purvhased Adobe Photoshop Elements 10 and Adobe Premiere Elements 10, but somewhere on your site it was suggested to download them instead and use the license code at the appropiate time. If someone can help with these questions, I would appreciate it. Thank youHi,
In the Welcome screen, you can accept the license agreement and can go ahead with the installation. You will be asked for the serial number. If you don't have one, install it as a trial application. By default, it's installed in the Applications folder. However, you can change the installation folder in the third screen, if you have a reason. Please see the screenshot below:
After installing, you can't move application to a different directory by dragging. You need to uninstall and install it again in the folder of your choice.
Thanks,
Sunil -
I cannot open downloaded files and they do not appear in the download folder
Up until yesterday everything was fine. All of a sudden when i try to download anything via firefox it shows it is downloading it completes the download but when i click the downloaded file in the download section or try to click open containing folder nothing happens. Also, I have checked the download folder and no file is present there. I have tried everything in the faqs and they do not seem to work thank you.
Firefox doesn't use the IE Favorites folder.<br />
Firefox stores the bookmarks in the Firefox Profile Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
If you no longer have access to that old computer then you can try to import the IE favorites or export the IE favorites in IE to an HTML file and import that file in Firefox.
* http://kb.mozillazine.org/Import_bookmarks
*https://support.mozilla.org/kb/Importing+Internet+Explorer+Favorites+from+another+computer -
How to create file in specific folder...
Hi developers,
I am new to java. I would like to create file in some folder. But i am fail to create it. Can any body help me please..
This is my code. It creates folder well...But file doesn't create.
import java.io.*;
public class file1
public static void main(String ar[])
File f = new File("c:\\ram");
f.mkdirs();
String pat = f.getAbsolutePath();
File ffs = new File("c:\\ram.txt");
System.out.println(pat);
}With Regards
sure...:)-Also, it's not clear where you want the file.
You're making a directory C :\ram, but then you're talking about a file ram.txt that's right in C:
Also, you can use / instead of doubling up the \ and it wil get converted properly.
If I wanted to create a file C:\ram\ram.txt I'd do this:
File parentDir = new File("C:/ram");
File file = new File(parentDir, "ram.txt");
parentDir.mkdirs();
file.createNewFile(); -
Http to file scenario generate "Acknowledgement not possible"?
Hi.
On PI7.1 we built a http to file scenario and used the RWB "Test message" functionality to test the interface.
Now we get a "Acknowledgement not possible" in sxmb_moni. How can we switch this off.
thanksHi
while sending request use either EO or EOIO for Asynch.
EO and EOIO, processing occurs asynchronously and the client only receives a confirmation of receipt with HTTP status u2018200u2019.
Read this
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm -
Query Count files under Specific folder in Sccm?
Hello!
I try to create a Query in sccm. There I want to count files under a specific folder. If folder on the client have less than 35 files, show the name of that computer. How should I begin to create that Query? Should I use criteria Software files Count?
Greetings
EmilI think for this task you will find it easier to create a report instead. Queries are based on WQL which has some limitations.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals -
Deleting files from Time Machine not possible
Prior to Mavericks it was possible to delete specific files or directories form all TM backups using the action menu.
this option no longer appears. this is an issue since it is no longer possible to prune the backups (remove files you really don't want to keep).
I know it is possible to exclude directories from backup (beforehand) but this does not cover removing files after they have been backed up..It was always fraught to remove anything from Time Machine and I have read somewhere that there is now a bug that the engineers are working on. It appears you cannot go back beyond the date you download Mavericks.
Perhaps someone will come into the thread who knows more about this. -
Read info about files in specific folder into internal table
Hi Experts
I need to have last modified date and filename information read into an internal table. I need to read in the information of all files in a specific (UNIX) folder (I do not know the name of the single files).
I really hope someone can help.
Thanks a lot
Kind regards,
TorbenHi Guys
Thanks a lot for you input.
I managed to get my program to works as follows:
REPORT ZDELETE_ARCHIVING_FILES.
*Step 1: Get the list of files in the directory into internal table :
DATA: DLIST LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
DPATH LIKE EPSF-EPSDIRNAM,
MDATE LIKE SY-DATUM,
MTIME LIKE SY-UZEIT.
DATA: BEGIN OF FATTR OCCURS 0,
FILE_NAME LIKE EPSF-EPSFILNAM,
FILE_SIZE LIKE EPSF-EPSFILSIZ,
FILE_OWNER LIKE EPSF-EPSFILOWN,
FILE_MODE LIKE EPSF-EPSFILMOD,
FILE_TYPE LIKE EPSF-EPSFILTYP,
FILE_MTIME(12),
END OF FATTR.
DATA: P_PATH(50) TYPE C.
CONCATENATE '/ARCHIVE/' sy-sysid '/archive' INTO P_PATH.
* WRITE: / P_PATH.
DPATH = P_PATH.
*Get files in folder - read into internal table DLIST
*if filenames are longer than 40 characters
*then use FM SUBST_GET_FILE_LIST.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
EXPORTING
DIR_NAME = DPATH
TABLES
DIR_LIST = DLIST
EXCEPTIONS
INVALID_EPS_SUBDIR = 1
SAPGPARAM_FAILED = 2
BUILD_DIRECTORY_FAILED = 3
NO_AUTHORIZATION = 4
READ_DIRECTORY_FAILED = 5
TOO_MANY_READ_ERRORS = 6
EMPTY_DIRECTORY_LIST = 7
OTHERS = 8.
IF SY-SUBRC EQ 0.
*Step 2: Read the file attributes into an internal table
*Read info about the files (attributes) into the internal table FATTR
*as we need info about the last time it was changed (MTIME)
LOOP AT DLIST.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
EXPORTING
FILE_NAME = DLIST-NAME
DIR_NAME = DPATH
IMPORTING
FILE_SIZE = FATTR-FILE_SIZE
FILE_OWNER = FATTR-FILE_OWNER
FILE_MODE = FATTR-FILE_MODE
FILE_TYPE = FATTR-FILE_TYPE
FILE_MTIME = FATTR-FILE_MTIME
EXCEPTIONS
READ_DIRECTORY_FAILED = 1
READ_ATTRIBUTES_FAILED = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
FATTR-FILE_NAME = DLIST-NAME.
APPEND FATTR.
ENDIF.
ENDLOOP.
SORT FATTR BY FILE_NAME.
DATA: time(10), date LIKE sy-datum.
DATA: months TYPE i.
DATA: e_file TYPE string.
LOOP AT FATTR.
CLEAR: time, months, e_file.
IF FATTR-FILE_NAME(10) = 'archive_BW'.
*Convert the unix time into readable time
PERFORM p6_to_date_time_tz(rstr0400) USING FATTR-FILE_MTIME
time
date.
*Calculate the number of months between date (MTIME) and current day
*ex 31.03.2009 - 01.04.2009 = 1 month
*ex 01.02.2009 - 01.04.2009 = 2 month
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_von = date
i_datum_bis = sy-datum
IMPORTING
e_monate = months.
CONCATENATE DPATH '/' FATTR-FILE_NAME INTO e_file.
* WRITE: / FATTR-FILE_NAME,
* FATTR-FILE_SIZE,
* date,
* time,
* sy-datum,
* months,
* e_file.
*Step 3: Delete files where months > 1
IF months > 1.
OPEN dataset e_file for output in text mode encoding default.
DELETE dataset e_file.
CLOSE dataset e_file.
ENDIF. "months > 1
ENDIF.
ENDLOOP.
ENDIF. -
Files in watch folder not moving to "Sources" after being processed
Files are not moving from the root of the watch folder into the "Sources" folder after being processed, which results in the files getting re-processed everytime AME is re-opened.
I just upgraded to Creative Cloud from the Production Bundle 5.5 with no changes in hardware/software config, so it's not that, however since I'm new I'll walk through the checklist:
Version: 6.0.3.1
Other applications installed: Premiere, Photoshop, Lightroom, AME, After Effects
Recent updates installed? Yes.
OS: Windows 7 64-bit, all updates applied.
Using AME through Creative Cloud? Yes.
Source footage: Avid DNxHD exports from timeline in .MOV container
Error message(s): None.
Error present in specific output format/encoding preset? No. It's a global issue.
What were you doing when the problem occured? Relaunching AME.
Has this ever worked before? Yes, in CS5.5 Production Bundle's AME.
What other sofware are you running? At the time, nothing.
Third party codecs? Nope, other than the ones that Avid installs during it's own application installation.
Computer hardware: *sighs* i7 3770k, 32gb ram, asus motherboard, gtx 570 graphics card, a bunch of hard drives, no third-party hardware.
MPE Acceleration in Premiere: Not really relevant in this issue, but yes, when I use Premiere I use MPE.
Is anyone else running into this issue?siva,
can you check the url in SLD for the related business system. It should be 8000 also and not 50000(i had a similar error and it was resolved by changing the URL in SLD.
is your DB up?
thanks
tony -
How to make the Installer place support files in specific folder
Hi,
I'm trying to use the LabVIEW2009 installer for the first time. I haven't used any earlier ones, so my understanding is limited. I have created a project and an executable and wish to direct the installer to place some groups of files in a number of directories other than the one in which the executable goes. On the Source Files page I can see a number of Folder descriptions in square brackets. I don't understand how to use these. Are they to be set up to point to specific directories? If so how?
So far I have managed to create an installer which puts all the support files from the project in a single directory. My attempts to select a subset of files within the Project View window and place them in a separate directory were not allowed since they are treated as an indivisible group. Basically i don't know enough about the installer and my searches for information have only yielded very basic information.
If anyone can help by supplying or pointing to more detailed information I'd be most grateful.
Thanks
George
Solved!
Go to Solution.Hi George
This is from the LV help:
Destination View—Specifies the location and directory structure of the files when they are installed. Select an item from the Project View tree and click the arrow button or drag the file to the Destination View tree to include it in the installer directory structure. You can drag multiple files at the same time. Click the buttons below the Destination View tree to add, remove, and rename folders in the directory. You also can right-click the folders and select a command from the shortcut menu.
The folders in the Destination View directory that do not have an LV prefix correspond to Microsoft Installer (MSI) properties that install files in the following locations.
[CommonAppDataFolder]—Files you include in this folder install to the Application Data folder.
[CommonFilesFolder]—Files you include in this folder install to the Common Files folder.
[DesktopFolder]—Files you include in this folder install to the Windows desktop of the current Windows user.
[LVxxRTEDIR]—Where xx is the LabVIEW version currently in use. Files you include in this folder install to the folder of the Run-Time Engine for the LabVIEW version currently in use.
[LVDIR]—Files you include in this folder install to the folder of the LabVIEW version currently in use.
You can find a full list of the MSI properties here. Scroll down to "System Folder Properties"
Best Regards
David -
I'm trying to download an app that's only available on iTunes. I've downloaded iTunes.exe but it will not open on Blackberry passport. Is there a specific .exe version that I need to download?
You can't. iTunes itself runs on Windows PCs or Macs. Any apps available from the iTunes Store will only run on iPhones or iPads.
-
Printing PDF files with smb/cups not possible // SLPReg status -20!
Hello *,
i am running SAMBA 3.6.1-1 and CUPS 1.5.0-1 on a dedicated system. Printer: Canon Pixma IP4500 (USB).
The problem is that all Windows 7 clients are not able to print PDF files (since few months) on that printer while printing these files with Linux software is no problem. The PDF files are neither encrypted nor forbidden to print.
I tried to print with Adobe Acrobat Reader X (latest) and Foxit Reader. Both are preparing the pages to be printed and close their printing dialog after processing. Windows printing queue does not show any jobs (which it even does not when printing simple images with MS Paint, which is not a problem).
Windows systems are using the Canon Inkjet 4500 and Canon iP 4500 driver (manually installed). Printing images works with both drivers.
I searched for "SLPReg […] failed with status -20!" but found no helpful information.
/var/log/cups/error_log
D [24/Dec/2011:23:05:35 +0100] Report: clients=0
D [24/Dec/2011:23:05:35 +0100] Report: jobs=499
D [24/Dec/2011:23:05:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:05:35 +0100] Report: printers=2
D [24/Dec/2011:23:05:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:05:36 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:05:36 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:05:48 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:05:48 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:07 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:07 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:19 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:19 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:35 +0100] Report: clients=0
D [24/Dec/2011:23:06:35 +0100] Report: jobs=499
D [24/Dec/2011:23:06:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:06:35 +0100] Report: printers=2
D [24/Dec/2011:23:06:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:06:38 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:38 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:50 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:50 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
/etc/samba/smb.conf
load printers = yes
printing = cups
printcap = cups
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 22:25
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer IP4500>
UUID urn:uuid:f9850f70-d898-39ad-4e0a-9edfecf4977b
Info Canon iP4500 series
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1306084752
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
DenyUser xy
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer IP4500_Duplex>
UUID urn:uuid:14fcd3ca-2118-380e-5033-79beb09bb3b7
Info Canon iP4500 series (Duplex)
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1324761079
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>Hi,
I can, unfortanetly, confirm this problem for me with a Brother HL-2030 and an HP Officejet 5600 series.
cups error log
D [03/May/2012:21:42:46 +0200] Report: printers=3
D [03/May/2012:21:42:46 +0200] Report: printers-implicit=0
D [03/May/2012:21:42:46 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:42:46 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:42:46 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:43:48 +0200] Report: clients=0
D [03/May/2012:21:43:48 +0200] Report: jobs=233
D [03/May/2012:21:43:48 +0200] Report: jobs-active=0
D [03/May/2012:21:43:48 +0200] Report: printers=3
D [03/May/2012:21:43:48 +0200] Report: printers-implicit=0
D [03/May/2012:21:43:48 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:43:48 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:43:48 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:44:50 +0200] Report: clients=0
D [03/May/2012:21:44:50 +0200] Report: jobs=233
D [03/May/2012:21:44:50 +0200] Report: jobs-active=0
D [03/May/2012:21:44:50 +0200] Report: printers=3
D [03/May/2012:21:44:50 +0200] Report: printers-implicit=0
D [03/May/2012:21:44:50 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:44:50 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:44:50 +0200] Report: stringpool-total-bytes=192536
printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 13:14
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer CUPS-PDF>
UUID urn:uuid:ad99f5dd-2577-355f-759c-6b2941a88d34
Info Virtual PDF Printer
Location Zion
MakeModel Generic CUPS-PDF Printer
DeviceURI cups-pdf:/
State Idle
StateTime 1309396700
Type 8450124
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HL2030>
UUID urn:uuid:1b453a5d-ade0-3ddb-45e4-c5bcfe1feabd
Info Brother HL-2030 series
Location Zion
MakeModel Brother HL-2030 Foomatic/hl1250 (recommended)
DeviceURI usb://Brother/HL-2030%20series?serial=G6J274210
State Idle
StateTime 1324728260
Type 8433668
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HP5600>
UUID urn:uuid:8d882659-3c7e-319f-5072-38d14683cfaf
Info HP Officejet 5600
Location
MakeModel HP Officejet 5600 Series, hpcups 3.11.10
DeviceURI hp:/usb/Officejet_5600_series?serial=CN838F31ZQ04B2
State Idle
StateTime 1324728896
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
smb.conf
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
Did you find a solution in the meantime?
Maybe you are looking for
-
Critical Error while upgrading workbook
Dear All, I receive a critical error while I open a workbook in Bex 7.0 analyzer. After I see the dialog - "Workbook open for upgrade", I received this error. It says check the trace and I don't have a clue how to check the trace. Can somebody help m
-
I need to refresh my iMac's OS but I can't use the combo drive
I need to upgrade the OS on an old iMac G4 I bought and the internal combo drive is dead. Is there a way to do this using either a Flash drive or a HD drive? I have SuperDuper so I thought I would copy my system from an existing iMac G4 to this compu
-
Error file "IphoneOSBundleResourceRules.plist" does not exist. (beta5)
when compiling new Cocoa Touch Application to debug onto Iphone Device. there is no resourcerules directory in /developer/platforms/iphonesimulator.platform/developer/library/xcode and the is no iphoneOSBundleResourceRules.plist file in /developer/pl
-
Quicktime Corrupted Movies... HELP
I went to watch some old videos (of some of my children's "firsts") and when the window opened up the video was purple and yellow and all pixelated! My newer quicktime videos work just fine so I don't know why some of these older ones have all of a s
-
I am looking for an SAP standard report that will show IC receovable and Payables between multiple companies. I will then use this information for external consolidation purposes.