Downloading iPod Touch Firmware 2.0.1 via iTunes
Apple Board,
I currently have iPrimus dial up that times out every 5 hours, however to download the new iPod Touch firmware it takes 30 hours to complete.
Whenever I pause all to resume the next day/next 5 hour session the download restarts. I have spoken to iPrimus about open ending the session however it is against their terms and conditions.
Can iTunes actually resume downloads via a dial up connection? Or, is there a download link similar to iPod Touch firmware 1.x.x?
I currently have iPod Touch firmware 2.0 running.
Any advice would be helpful.
Regards
Apple Board,
I have attempted to download the file again however I found where it downloads to +C:\Users\<username>\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates+ the file downloads as a .DOWNLOAD file however when I click pause all the file is deleted so this is why the file restarts upon clicking resume/resume all.
Is there a way to correct this so the pause/resume actually works?
Regards
Similar Messages
-
Hi.
It's been a while since I've updated my iPod, and now that I've tried to update it (from iOS 4.2), whenever I click the 'Check for new updates' [for my iPod] button, iTunes states that the latest version is already installed, which obviously is NOT the case.
I am using the latest version of iTunes, and have already tried re-installing it.
After attemping to update, the next logical step was to restore, despite losing some of my data this way, for I currently have no-choice but to update via a different system to my usual managing computer of my device(s). However, an unexplained error occured, and my iPod is stuck in recovery mode (displaying that 'connect to iTunes' image it shows at this point).
Now, I've tried repeatedly to restore th iPod via iTunes, but it just won't work - as it is 'extracting software' (as indicated at the top of iTunes' window), it stops, giving a rather vague error: 'The iPod "iPod" cannot be restored at this time because the iPod software update server could not be contacted or is temporarily unavailable'.
I have no idea why this occcurs repeatedly, as it is persistent to do so.
I'd also like to confirm that my system is correctly connected to the internet at a speed that should be ample to install any required updates (furthermore, this error occurs after no-more-than 1 minute after attempting to restore the device)
Thanks in advance
~mini.Thanks, but you don't happen to know anything else about this, do you?
Also, I've now realised it was pointless trying to update my iPod, for I've now found-out that the 2G can't be updated past 4.2.1 (or something) anyway >_> -
IPod touch (1G) won't connect to iTunes Windows 7
iPod touch firmware is 3.1.3. iTunes is version 10.3.1.55. Windows 7 is Professional version, 64-bit.
I've found a number of web posts about this issue dating back to 2009, but none of those solve my issue or exactly describe it. I can put my iPod touch into Device Recovery Mode, connect to iTunes, and restore the iPod, but once that is done, I cannot connect the device to iTunes (Windows 7 64-bit mode). However, I can connect the iPod to my Vista laptop, and I can connect the iPod to my Windows 7 machine if I run iTunes in the XP Mode virtual machine (32 bit). I've gone through the steps looking for a conflicting USB service, and if there is one, it's part of Windows 7. This started after I updated iTunes recently, but I'm not sure that had anything to do with it since I had not connected it in a while, and the first thing I did was update iTunes. Any ideas? Thanks in advance. -johnI've got the same problem for a long time
did you find the answer ?
thanks
Bertrand -
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?
See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch -
what all do i need to do to get my 3rd generation ipod touch to update. i have uninstalled itunes and tried downloading the new 12.1 and it still tells me that there is nothing newer then the 5.1. im really getting aggrivated
I'm in the same situation and think 5.5.1 is the latest our iPods will take. I just had to Reset & Restore, and I couldn't restore two apps that now require iOS 7.1.
-
Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?
Is it possible to update my iPod touch firmware from 2.2.1 to 3.0?
Is it free or do I have to pay?You'll have to pay a small fee.
-
Do I need to download my music from my ipod touch onto my new computer through itunes before downloading new music onto my ipod?
No you can purchase it directly from the iPod and then sync it to the computer whenever it is convenient for you
-
Sensible suggestions for ipod touch firmware
Not sure where to post but please note my suggestions for development of ipod touch firmware/native apps as follows:
1: on-the-go playlists. Please add the VERTCAL ALPHABETIC MENU when scrolling for tracks to add to the on-the-go playlist.
2: Mail, Notes & Contact apps should be available in LANDSCAPE mode as touch keyboard is by definition larger and more manageable.
CheersYou can send feedback/feature requests directly to Apple at this link: Apple Product Feedback
-
My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.
You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows -
Recently updated my 3rd gen Ipod Touch firmware (4.3.3) and now all my apps won't open! When I click on an App it attempts to open and then closes....HELP!
Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software) -
I have a ipod touch that has been locked by itunes and itunes says i must reset the ipod to unlock it. Is there a way to back it up on a hard drive or icloud before I reset it or avoid reseting it all? thanks
If you previous synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
Otherwise y have to erase the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
its is possible to back up the songs that i have on my iPod touch in iCloud or either in iTunes?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To iCloud for non iTunes purchases only if you subscribe to the paid iTunes Match service
To the computer by:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.
oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-
-
My iPod touch doesn't show up in iTunes but my iPhone does help
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
Ipod touch doesn't work with latest itunes install
Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.
Maybe you are looking for
-
SAP CRM WEB UI : Toolbar not displayed properly
Hi , One of my client's is facing an issue with the toolbar display on CRM Web UI. For example, if he opens up some activity on Web UI, the toolbar is displayed vertically in an uneven format as shown in the image attached herewith: Does any one have
-
Flash builder 4.7 throwing errors for no reason - is there a fix?
Hello, I am using FB4.7, right now on an AS project. For some reason, FB has started "locking up" on runtime errors. Meaning, if I run a code with an error, then fix the error, FB still reports an issue at that line, even if the line is blank. In the
-
InfoSpoke and Logical File Name
We have created an Infospoke to extract data to a logical file. When we define the Logical File Name Definition using the FILE transaction, we have to enter a physical file name. This will require us to create a new Logical File Name Definition f
-
FCP renders different part of footage
I see that other people have had this prob in the past but I don't see any solutions... Everything plays fine in my timeline, but when timeline is rendered or exported, FCP substitutes a different part of the footage, so I end up with all these rando
-
The yealt website said I could remove it from the add-ons manager, but it is not showing up in the add-ons manager, even when I run a search for it.