Downloading iTunes upgrade 7.1.1

please help. for a few months now everytime i open iTunes it tells me there is an upgrade available which I have tried to download several times with no luck. now i have just bought a new iPod shuffle and cant use it! Everytime I try to download 7.1.1 it says "not a valid win32 application" What the **** does that mean? and how do I download this upgrade or put music on my new shuffle without upgrading....As one of the other topics suggested....I am sick of it, upgrades are usually so simple!

"the feature you are trying to use is on a network resource that is unavailable...Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below."
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

Similar Messages

  • I have downloaded itunes upgrade but ipad will not recognize

    I just received my ipad as a gift, and I want to begin to use it. I was told that I needed to download the newest itunes, so I did. However, when I try to connect my ipad I am told that I still need to upgrade my itunes. I tried to follow directions on support and was not able to complete as directed.

    What version of iTunes did you install? Go to the iTunes tab in iTunes and click on about to find the which one.

  • I downloaded itunes upgrade now it does not work com.apple.ipod.plist

    com.apple.ipod.plist
    this was in a download but i can not access i tunes since i did the upgrade sept, 21st of this year...

    Why not?  What happens when trying to use it?
    "Will not work" is useless when asking for help.  Without specifics, no assistance can be provided.

  • How do I download iTunes upgrade in my Windows xp system?

    I have attempted 100 xs and it will not properly download?  Any help would be greatly appreciated..

    iTunes 11.0.3
    For Windows XP, you need:
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    400MB of available disk space
    Go to your Start Menu (on your computer)>>All Programs>>Apple Software Updates
    It will give you updates for iTunes, QuickTime Player, and other Apple Software
    Need help or having trouble:
    Trouble installing iTunes or QuickTime for Windows
    Need to Uninstall & Reinstall iTunes:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Hope this helps.
    Message was edited by: keeferaf

  • HT1349 How do you fix runtime error r6034 caused by downloading itune upgrade?

    itunes offered me an upgrade.  I accepted the upgrade.  Now itunes is dead and all I get is a runtime error R6034?  I am running an HP with vista.  How do I fix it?

    iTunes RunTime Error R6034 > http://support.apple.com/kb/TS5376
         Also see Here... https://discussions.apple.com/docs/DOC-6562

  • Downloading iTunes upgrade

    I've been unable to install an update for iTunes. I uninstalled my old version, but when I try to download the new at Apple.com, I click install, some error message flashes up too quickly to read and nothing happens.

    Hi noinstall
    A lot of the time iTunes installs fail because anti virus/antispy programs such as Norton interfere somehow.
    My recommended method of d/l and installing iTunes is this:
    1. Back up your iTunes library to a removeable hard drive if you can or copy it to a DVD. Search the forums for best way to do this.
    2. D/L iTunes to your pc - DO NOT install on line
    3. Temporarily disable your AV/AS programs (right clicking in the icon normally gives you the options)
    4. run the install
    5. re-enable your AV/AS prgrams.
    Hopefully this should do it. If not, try launching Quicktime - does this launch ok? If not follow above process but this time d/l stand alone QT from Apple.com
    Good luck
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • What is wrong with apple and itunes? I downloaded itunes upgrade to 11. somethng and couldn't open itunes because the program was missing a dll.exe file!!!! This happens with every upgrade..

    what crap

    I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place

  • I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

    I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
    The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

    Hi, drjbuchanan.  
    Thank you for visiting Apple Support Communities.  
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue.  
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/en-us/ts3430
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/en-us/ht2311
    Cheers, 
    Jason H.  

  • Tried to download itunes and now  my iphone does not even work.I have been on the phone with apple for 3 hours and it still won't work.I have a service pack 2 in this land computer and it won't upgrade .I do have the latest verision of itunes.Then we put

    I tried to download itunes to my phone.First it wanted it to download the new itunes.We also updated our Windows xp.I kept coming up can't complete because there was an error when setting up.One time is was error 9 and they tried to help me.I have a laptop with the internet and we tried it there.We were able to get service pack 3 downloaded.So we did upgrade the itunes on the laptop even though I have never put music on there but there is some from someone .I never heard of many of the songs.Any how I did try to download and restore on the laptop and then come to the land computer and see if the box comes up to restore the  contacts.Well it didn 't work and now my phone won't even turn on .I have no one to call if something happened to me.I am going to the Apple store right off the bat tomorrow morning.I have everything in the box and the phone and reciept and see if they make it work or give me another one.I have to take my sim card again since They gave it back to me.I bet it means I can't sync the photos in the phone.Even with 2 computers and talking with 3 people it still did not work.All because I wanted to download the itunes to my phone.I don't care now if I can just get my phone to work and my contacts are in there.I hope I don't have to buy the ringtones again I bought 4 of them.Any one have this problem and what did you do to fix it?

    The Apple rep tried both those ideas and both failed. The rep was connected to my computer so she
    could see my screen and show me exactly what to do. My iPhone (not ipad) never has synced photos to my computer,
    I have to use explorer to copy and paste or cut and paste them to my PC . It is the syncing back to my iPhone of only the much smaller selected photos that used to sync in itunes but now the itunes sync button cannot be clicked to make that happen. And the reason I only sync back selected photos is that my total PC pictures file is about 40 Gb. Also I find it a lot more useful to have a small number of folders ( no sub-folders of course) so I can quickly locate on my iPhone pictures from different categories such as family, autos, etc. None of this posed any problems for over a year until just recently. I am reading on other threads of many people with other iTunes syncing problems, and wonder now if it is the latest iTunes updates that are causing the problems? While I have tried removing and reinstalling iTunes on my PC, I don't know how or if you can, install a previous version?

  • I've just bought an new laptop and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now I have no music or apps on my phone. The contacts photos and texts all seem fine. Just the itues stuff that's missing.

    I have just bought a new computer and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now have no music or apps on the phone. Contacts, texts, photos all fine. Just all itunes content that is missiing. It isn't showing in my itunes account on my computer or on my phone. Any idea how to get it back? (No point synching with itunes on my computer as it isn't there either!)

    I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
    If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one.

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • Problems downloading iTunes after upgrading to Windows 8.1

    I just upgraded to WIndows 8.1. When I opened my iTunes it said there was an update was available. I tried to update my iTunes but kept getting errors. SO i decided to try and download the update later but when I tried to go to the iTunes store I got an error saying there was a problem accessing the iTunes store and then my iTunes closed. I looked at some of the comments in the community and tried uninstalling it and reinstalling it. Now when I try to download itunes I keep getting the following error:
    I am the only user of the computer and the only administrator. I tried downloading the installer and then right clicking on it and selecting 'run as administrator' and this also doesn't work.
    Please help
    Thanks

    "The installer has insufficient privileges to access this directory: C:\Program Files(x86)\iTunes\iTunes.Resources\sk.lproj\Printing Templates. The instillation cannot continue. Log on as administrator or contact your system administrator."
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Windows 8 instructions in the following document: Disk Error Checking in Windows 8
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Mac's iTunes can't download to upgrade iPod Touch to v2.1?

    Hello.
    Earlier, I was trying to update an iPod Touch to v2.1 but I ran into problems with iTunes v8.01's download in Mac OS X/Leopard v10.5.5 on a MacBook Pro. iTunes said:
    "There were problems downloading some purchased items.
    For more information on the items that could not be downloaded, click below.
    There was a problem downloading ÒiPhone 2.0 Software Update / iPhone 2.0 Software Update. You do not have enough access privileges for this operation.
    Please check that the connection to the network is active and try again.
    There was a problem downloading ÒiPhone 2.0 Software Update / iPhone 2.0 Software Update. You do not have enough access privileges for this operation.
    Please check that the connection to the network is active and try again.
    There was a problem downloading ÒiPhone 2.0 Software Update / iPhone 2.0 Software Update. You do not have enough access privileges for this operation.
    Please check that the connection to the network is active and try again.
    There was a problem downloading ÒiPhone 2.0 Software Update / iPhone 2.0 Software Update. You do not have enough access privileges for this operation.
    Please check that the connection to the network is active and try again."
    I noticed iTunes' download said 4 KB downloaded and had resume option which failed with the same errors.
    At first, I thought it was maybe because Mac OS X account level was at "standard". So, I changed it to administrator level, logged off, and relogged in to retry. I got the same errors again.
    So I decided to log off and log in with the other account with administrator access. That worked (downloaded, restoring iPod Touch which is still processing as I type this). Also, this was a brand new iTunes account and sharing music files with other accounts on MacBook Pro if they matter.
    What happened so I can fix this for future downloads and upgrades. Thank you in advance.

    Anyone? Bumped.

  • As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • After I downloaded and installed the latest iTunes upgrade (to 10.5.1), I am no longer able to download free app upgrades for the apps I have on my iPad/iPhone/iMac which i had previously purchased. Itunes tells me I "don't own the major versions".

    After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
    The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
    Regards,
    Bruce

    Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
    Message was edited by: graphico
    Message was edited by: graphico

Maybe you are looking for

  • Video Converter Freezing on Zen Visio

    Hi all,?Everytime?I try to do video conversion using the video converter that came with the Zen Vision:M software it will completely lock up my machine. I called tech support and they suggested Uninstalling and reinstalling the creative software in a

  • Get Division based on Product

    I have created one material using COMMPRO1 transaction and i have assigned Division for it. Now i want to know where that division gets stored...so that i can retrieve the division based on product guid. I want the table name for fetching the divisio

  • Date Prompting

    I have a date prompt paramenter field and it prompts for a date in yyyy-mm-dd format. Is there a way to change that prompt to mm-dd-yyyy format? Thanks in advance Jim

  • Trouble Accessing Photo Albums

    When I go to the Photo album, it lists the albums I have. Right now all I have is the Camera Roll and Wallpapers album. The top album- Camera Roll, is blocked by the Album header in Ipod Touch. It won't scroll down to access the album. Can anyone hel

  • Is there a way to Assign Values in many rows based on search values in APEX.

    I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using