Downloading Master data from R/3 to CRM

Hi all,
Inorder to download Master data from R/3 to CRM, first we need to download all relavent customizing and condition objects, is this is the correct procedure. Pls anyone clarify this.
If we make any changes to the data in R/3 which is already downloaded to CRM, will those changes replicate in CRM, inorder to replicate those changes in CRM what are the necessary things to be done.
please anyone clarify on this
Thanks In advance
Phani Kumar TN

Hi Phani -
You will need to download all the condition and customizing objects which are relavant for the data you are replicating. Else you will get errors.
Ans to 2nd part of your Q - you can do this by doing a delta load.
I have some documents which u may find useful for this. Let me know where I can e-mail that.
Cheers,
Aarthi.

Similar Messages

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

  • Initial Load for Master Data from R/3 to CRM

    Hi Middleware Experts,
        I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
    1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
    2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
    Please suggest whether it can be done or not and which is the better option.
    Regards,
    Rahul

    Hi Rahul,
    Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
    When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
    <b>Allot points if my post helps!!</b>
    Best regards,
    Vikash.

  • Error in pulling customer master data from R/3 to CRM

    Hi,
    I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
    Is there anyone knows any recent updates from SAP that might solve this problem?
    Please help.
    Thanks.

    Hello,
    it seems your customizing of ERP and CRM is different in this area.
    Please try a new initial load for all the customizing objects which may be responsible:
    DNL_CUST_BASIS
    DNL_CUST_BASIS2
    DNL_CUST_BASIS3
    DNL_CUST_BASIS5
    DNL_CUST_BASIS6
    DNL_CUST_BNKA
    DNL_CUST_KTOKD
    DNL_CUST_PRC
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_PROD3
    DNL_CUST_SPROD
    DNL_CUST_TVAST
    DNL_CUST_TVFS
    DNL_CUST_TVKN
    DNL_CUST_TVLS
    We do every week a new load of this objects using a background job.
    Alternativly you could investigate which customizing object is the correct one and only load this.
    After this new load retest your scenario.
    Best regards
    Manfred

  • Replication of Customer master data from R/3 to CRM.

    Dear Friends,
    If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
    REgards,
    Prabhu.

    CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
    For CRM 5.0 you can use the link below:
    http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    You then need to read the instructions for:
    CRM Generation
    CRM Connectivity
    CRM Customizing Replication
    CRM Organization Model
    CRM Master and Transaction Data Replication
    Those steps will provide on how to setup the middleware for customers.
    You then will need the to read the following building blocks for marketing:
    CRM Central Master Data
    CRM Marketing Master Data
    CRM Lean Campaign Management.
    Good luck,
    Stephen

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • Transfer of Business Partner Master data from CRM to TIBCO.

    Hi All,
    We intend to integrate CRM4.0 with TIBCO for transfer of Business Partner Master data from CRM to TIBCO.
    Can anyone provide solution for the same. One of the think is through XI.Please correct if it is the right way to do it?.
    Also, would appreciate if someone can provide documentation or links for integration.
    Regards,
    Mehul Shah.

    Hi Rahul,
    Yes you can integrate CRM and TIBCO using XI.
    Check the below links
    transfer the Business Partners from the CRM system to XI and to MDM.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797
    any XI content delivered by SAP can be found in the SAP service marketplace which you can enter http://www.sap.com/services/bysubject/servsuptech/index.epx.
    a) After you entered the service marketplace go to Software Download under the header SAP Support Portal.
    b) Next navigate to Download -> Support Packages and Patches -> Entry by Application Group
    c) In the main window select SAP Content and then Process Integration Content (XI Content).
    d) Now you should see a list of XI content packages.
    The package containing XI content for CRM is
    XI CONTENT BBPCRM
    In addition you find some packages that offer mappings from CRM interfaces to industry standards like RosettaNet or STAR standard, like
    XI CONTENT ROSETTANET CRM
    XI CONTENT STAR CRM
    Some of these packages may require a license, therefore I am not sure if they are visible to you.
    As per my knowledge, XI has CRM pre-delivered content and usually it communicates thru Proxies,Http, RFCs..
    And in your scenario , you can always go for Proxy communication
    Have a look into these threads
    CRM and SAP XI
    SAP CRM integration with XI
    How to access the pre-delivered XI Integration Content for APO ,SCM or CRM
    Dont forget to Reward points if this helps
    Regards
    Pragathi.

  • Can we download employee data from ECC to CRM using standard middleware?

    HI,
    Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
    Thanks,
    Regards,
    PV

    Standard replication for employee to CRM is using ALE.
    BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
    However send this information using ALE is not difficult. Why don't you wan to use ALE?
    Regards,
    Lyda

  • Download data from ECC6.0 to CRM

    We want to download data from ECC6.0 to CRM 2.0.
    I am facing an error while trying to use Function  module 'SMW_CALL_MIDDLEWARE'
    to create and post BDOCS in CRM 2.0.
    The BDOCs are getting posted successfully. However, function module is updating 
    only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

    I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

  • Downloading  the master data from database

    Is there any standard report or function module or bapi's for downloading the following master data from the database.
    1. Masterial master
    2. Vendor master
    3. Customer master
    4. For J1ID
    regds
    prabhu

    hi,
    I checked as per my knowledge there is no BAPI for these requirement.
    regards
    prabhu

  • Uploading data from R/3 to CRM

    Hi Gurus,
    We have the following scenario:
    Our customer master data is created and maintained in R/3.  Now we need to create and maintain in CRM.
    1.  we need to bring R/3 customer to crm and start maintaining only in crm
    2.  there should not be any number overlap
    eg. 1000 customers in r/3 starting no. 1 to 1000, we need to bring this customer to crm and start maintaining in crm.  then from cusotomer no. 1001 onwards need to create from crm.
    Can anybody help me on the steps to be followed and the configuration settings to be maintained. How the number ranges have to be maintained and what settings should be done in CRM and R/3 before transfering the data.
    Also the steps on how to upload data from R/3 to CRM??
    Thanks.
    Divya Gupta

    Hi Divya,
    Create 2 different number ranges and groupings and assignement in CRM system
    For Ex:
    Create a number range(External) with 1 to 1000 and create a grouping ABC and do the assignment(R/3 customers)
    Create a number range(Internal) with 1000 to 100000 and create grouping XYZ and do the assignment (New customers)
    we need to bring R/3 customer to crm and start maintaining only in crm
    Do the following settings in R/3 system to bring the customer data from R3 to CRM
    T Code: PIDE
    Select R/3->CRM: Assign Account Grp. to BP Classification
    Select the Account group which is created in R/3 for customers and set classification as B and select the grouping  as ABC(Defined).
    and start initial download in CRM system with T.Code R3as
    Load Object  =  CUSTOMER_MAIN
    Source Site (Sender)  = R/3
    Destination Site (Receiver) = CRM
    and Execute.
    It will bring the customer data from R3 to CRM.
    While creating new customers in CRM system select the grouping as XYZ to avoid overlaping.
    Regards
    Narayana

  • How to download org model from R/3 to CRM.

    Dear Friends,
                     How to download Org model  from R/3 to CRM. Any one tell me step by step detaily.
    Regards,
    Raj kumar,
    08123667379

    You can download organization from R3 to CRM in the following way.
    go to SPRO -> Customer Relationship Management -> Master Data -> Organization Management -> Data Transfer -> Copy SAP ECC Sales Structure. This is the place from where you can replicate the sales structure from ECC. You can have a look at the IMG Implementation Guide for a more detailed information.
    As for the BP not coming as an Organization, you need to activate the switch to integrate the BP and Organization functionality. The link for the same is given below:
    SPRO -> Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management --> Set up Intergration with Organization Management . Here you need to activate the following Switch - HRALX OBPON ON Integration O-BP Activated.

  • Updating master data from WEB UI

    Hi experts,
    Is it possible to change the partner attributes such as e-mail, box no, phone, etc from CRM WEB UI?
    I am planning to create an admin to where he can change the partner details in WEB UI. My assumption is the master data/attributes of partner cannot be change in CRM except in HR system. what could be posible. what not. Please suggest me the best.
    Thanks
    Chand

    Hi Chand,
    I am not an expert. But will contribute to your question.
    You can use the transaction Launcher concept to tie the transaction of changing the HR Master Data with CRM Web UI. Using this you will be able to call the call the transaction in SAP ECC to change the HR master data from CRM Web UI. Assign this to the required navigation bar profile. This will resolve your issue.
    Thanks,
    Ravi G

  • Master data from SRM to MM

    Hi Gurus,
    Is it possible t transfer master data from SRM to MM? If it is possible, can you please explain me how can we do it??
    Regards,
    Eswar

    Hi
    You can transfer the master data
    Vendor Data - By first transfering the payment terms and quality terms by using
    Report: UPLOAD_PAYMENT_TERMS
    Report: BBP_UPLOAD_QM_SYSTYEMS - for quality sytems
    then 
    by transaction BBPGETVD for all the vendors  data from the back end
    Material Master Data by CRM Middlewear for the material master data of The process of material master data tranfer is simple and effective but you set the Adpater setting for the EBP side and Plug-In settings at R/3 side.
    If you still have any questions let me know

  • Upload data from Excel to Sap-Crm

    Hi All,
    I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

Maybe you are looking for