Downloading master warranties along with the EQUIPMENT

Hi CRMGurus,
I am downloading EQUIPMENT from ECC to CRM. But warranty information in ECC is not getting downloaded to CRM. There is no BDoc error as such.
Does any body has an idea, will this happen? If yes is there any setting needs to be done.
Thanks,
Best regards,
Vinay

Hi Vinay,
Please Check for The Filter Parameters "Table/Structure within Objects" in your "Equipment Filter
Ensure that the Following Entry is Present which brings the Warranty Details from ECC System to CRM system.
EQUI<Table Name> SMOEQUI<Mapped Structure>
Please Download after This Entry and Chk the Details must appear as Required.
Thanks and Regards,
RK.

Similar Messages

I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

Very many thanks Niel. My problem solved in less than five minutes. I've never had to use that command before. I found the folder and copied it - but I'm still no clearer as to where it was!
Thanks again

I currently have Mac OSX 10.4.11, and I just purchased OSX Snow Leopard. Can I keep my original version of iMovie along with the new one when I download the new operating system?

I currently have Mac OSx 10.4.11, and just purchased OSX Snow leopard. Can I keep my original version of iMovie along with the new version when I download the new operating system?

I purchased the Mac Box Set which includes Snow Leopard, iLife, and iWork. So after downloading the box set, will I be able to keep my iMovie 6.0.3?

I have Photoshop 12, installed online. My computer crashed and was repaired, but Photoshop was not restored. I see it in my products, along with the serial number/activation key, but no download is available. How do I re-download my product?

I have Photoshop 12, installed online. My computer crashed and was repaired, but Photoshop was not restored. I see it in my products, along with the serial number/activation key, but no download is available. How do I re-download my product?

Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

Please, help!
After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
Thanks

Have you been trying to download from the app store? Did you get a message?
As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
Barry

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

How to make plant default on the line item along with the item category

Hi All,
I want to default Plant on the line item along with the item category.In order to meet the following scnario.
1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
First line item is the main item which appears along with the Plant 1 which contains valuated items
Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
Rahul

Delivering Plant is determined in the following order
1. Customer material info record.
2. Customer master
3. Material master.
Use one of them an default your plant.
I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
regards
jude

ALV to EXCEL along with the color

Hello,
      Is it possible to download an ALV report output to an EXCEL along with the color in the ALV report.I made an ALV report with some rows having red color depending on a bussiness logic. When user downloads the ALV report to excel from standard ALV layout they cannot get the colors in the excel. Is there a way to do this or any sunstitute?
Thanks,
Giri.

Hi Giridhar,
Have a look at this code
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
     CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
      FORM FILL_CELL                                                *
      sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
      outputs OLE error if any                                       *
--> p1        text
<-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Have a look this Link
http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm
Regards,
Santosh

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I keep getting error 586 in the console along with the following: 3/18/12 7:55:19 PM com.apple.launchd[1] (org.samba.smbd) Throttling respawn: Will start in 10 seconds 3/18/12 7:55:29 PM com.apple.launchd[1] (org.samba.smbd[1246]) Exited with exit code:

I keep getting error 586 in the console along with the following:
3/18/12 7:55:19 PM com.apple.launchd[1] (org.samba.smbd) Throttling respawn: Will start in 10 seconds 3/18/12 7:55:29 PM com.apple.launchd[1] (org.samba.smbd[1246]) Exited with exit code:
The console shows thousands of these error messages and it's messed up many functions of my MacBook.
I have VMFusion on my Mac because for work I need to use Windows. Last night I tried installing Windows 7 but could not complete installation. I got a message saying "can not locate driver". Then I started getting the Error 586.
Today I unistalled VMFusion hoping that would resolve the Error 586. No such luck.
Can anyone help me get rid of this constant error, plesase?

I believe this has something to do with Mail. Are these frequently occurring errors? If so and you quit Mail do the errors cease?
Google searching for "org.postfix.master" reveals quite a number of links that you might check for more information.

I downloaded the Beta 4 version tried to leave feedback and it says I need to download the beta version, what is going on? I want to leave feed back on NOT being able to download pics in hotmail with the new beta version????

I want to download a picture from my hotmail email, but it keeps reverting back to the email pic. Wont download it. I had to go to my Yahoo account to do this! When I went to the feedback for the New beta version FireFox 4 I was told I had to install the beta version - WHICH I already have! HELP
== This happened ==
Every time Firefox opened
== I downloaded the Beta version FireFox 4

The version I am using is 4.0 - I went and Reset user agent to everything showing on the link sent:
general.useragent.extra.firefox;Firefox/4.0b1
general.useragent.locale;en-US
general.useragent.security;U
I am still unable to download pics in hotmail..... Along with not being able to use Aviary Image Editor as it says it is Not compatible with the 4.0 version. So that Add-on picked up the right version I am using. (I use this to take ScreenShots!) - I sure hope this will be available when FireFox 4.0 is fully launched.....................
Along with the email pic problem :(
Thanks for the help

Master pages working with the books panel

Hi everyone,
I'm starting a book which will have about 20 chapters in it. I'm using the books panel to work with it all but I'm not sure how to handle the master pages so that they'll work across all chapters within the books panel. I have a 2-page master spread set up with both of the pages having automatic numbering and the left hand spread with the name of the publication. The right hand spread will have the chapter name and this will be the only element that will change from chapter to chapter.
So I wondered if there was a way to set it up so that all the chapters were based on this master page. I'd then need to change each of the chapter headings for each chapter but then if I needed to make a change to the left master page, ie. with the publication name on it, is there a way to make this change on just one of the chapters and then all the other chapters would update to reflect the change.
Appreciate any advice.

Normally I would say make a second master page for the chapter start nad use that, then include the master pages when synchronizing the book, but there's another thread from yesterday where that is not working for the user, and I'm still trying to figure out why.
You can follow along at http://forums.adobe.com/message/2760081#2760081, or if you have a Mac you can help out by seeing if it works correctly for you.

Using NonCatalogLogger along with the LogMBean

Hi anybody
According to the API, the NonCatalogLogger class provides application services
for logging error messages to the weblogic server log. The name, location and
other properties of the logfile are determined by the LogMBean for the server.
Now, I have the instance of the LogMBean running in the server and using this
instance I am able to configure our weblogic server's logging configuration from
any client machine. But I am not able to log any message from a client machine
into the server's log file. That is I am not able to use the LogMBean object along
with the NonCatalogLogging object.
Do you have a suggestion?
Regards
Zakaria Chowdhury

http://edocs.bea.com/wls/docs60/javadocs/weblogic/management/configuration/L
ogMBean.html
"Rajan Annadurai" <[email protected]> wrote in message
news:3ced8eb9$[email protected]..
>
hi Sanjeev,
"in addition to FileName you can specify any LogMBean prop for a client inthe same
manner"
Can you please list down the LogMbean property to set rotation size. I amnot able
to find it any where in the documentation.
thank you,
Rajan
"Sanjeev Chopra" <[email protected]> wrote:
Clients cannot log to the servers logfile. If you use NonCatalogLogger on
the client, it creates its own file. By default however, the file is
turned
off. You need to turn it on by specifying the FileName prop of theLogMBean
for that client.
Since client config is not done thru MBeans, the way you define this is
with
system props i.e. -Dweblogic.log.FileName=....
(in addition to FileName you can specify any LogMBean prop for a client
in
the same manner)
"Zakaria Chowdhury" <[email protected]> wrote in message
news:[email protected]..
Hi anybody
According to the API, the NonCatalogLogger class provides applicationservices
for logging error messages to the weblogic server log. The name,
location
and
other properties of the logfile are determined by the LogMBean for theserver.
Now, I have the instance of the LogMBean running in the server and
using
this
instance I am able to configure our weblogic server's loggingconfiguration from
any client machine. But I am not able to log any message from a clientmachine
into the server's log file. That is I am not able to use the LogMBeanobject along
with the NonCatalogLogging object.
Do you have a suggestion?
Regards
Zakaria Chowdhury

I tried to download a movie on my iPod touch but due to limited space, it did not download. Then, I checked my credit card online, and I found the money was already taken. How will I get it to download on another device with the same account?

I tried to download a movie on my iPod touch but due to limited space, it did not download. Then, I checked my credit card online, and I found the money was already taken. How will I get it to download on another device with the same account? Also, I was wondering why they took my money even when it did not finish downloading let alone get downloaded?

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there. I have changed my email address on my iMac but my old one still remains on the iPad. Also changed password. Nothing works! I can't use the iPad like this!

The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there. I have changed my email address on my iMac and also changed my password. The old email address is still on the iPad. Anyway, I can't use the iPad because can't get the apple id password box to go away. Thanks for any help!

This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

Downloading master warranties along with the EQUIPMENT

Similar Messages

Maybe you are looking for