Downloading Photoshop elements 12 - which link

I'm in the Akamai Netsession Download and there are two links, which one do I choose? Is there a difference or do I need them both?

Hi goose.lives,
Akamai is a download manager so when you click on the download button it will automatically download the required files.
For manually downloading the files, in the Akamai interface you will see 'File 1 of 2' and 'File 2 of 2'.
You need to download both the files and to the same folder.
One of the files has .7z extension and the other is a .exe file
After downloading you need to click on the .exe file to start the installation.
Hope this helps.
Regards,
Rave

Similar Messages

  • Please help me to download Photoshop Elements 12 which I purchased this evening but failed to downlo

    I purchased Photoshop Elements 12 this evening but failed to download successfuly. Help?

    here you go, http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
    download the trial and activate to full with your serial number.

  • I recently changed computers and would like to re-install Photoshop Elements 10, which I have previously purchased.  where would I find that download?

    I recently changed computers and would like to re-install Photoshop Elements 10, which I have previously purchased.  where would I find that download?

    Hi There,
    Kindly check the below mentioned link to download PSE 10.
    Download Premiere Elements products | 13, 12, 11, 10
    Thanks,
    Atul Saini

  • I have a new computer and I am trying to find a link to download photoshop elements premier 11 the link I was sent by the tech only shows what I need...what I need is an actual download button

    I have a new computer and I am trying to find a link to download photoshop elements premier 11 the link I was sent by the tech only shows what I need...what I need is an actual download button

    This is actually the Photoshop forum. Premiere Elements forum is here
    Premiere Elements
    I assume you realise that 11 is not the current version, which is now up to 12
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
    And if yes, that you had 11 installed on your last computer?   Did that come on a disk or download?  If disk, have you now lost that disk?
    If yes, and you registered your software, log on to your Adobe account, and find My Orders (or similar).  You may find the download link and your serial number there.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Where can I find a link to download Photoshop Elements 12 so I can enter in my purchased code?  All I can find is Photoshop Elements 12.

    I purchased Photoshop Elements 12 from bestbuy.com. The download didn't work, and they are telling me I need to download photoshop elements 12 trial version and then I will be able to enter my purchase code and will get my program. But I can't find anywhere online that still has the download links for version 12! Help Please!

    Here:
    Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools

  • Install for Photoshop Elements Version 6. I lost my disk the link on the site to download the trail for elements 6 is broken. Where can i download PhotoShop Elements 6?

          I lost my disk, the link on the site to download the trail for elements 6 is broken. Where can I download Photoshop Elements 6?
    I was trying to install the trail because that was the only thing available and I have the product key. Can you please direct me to a link to download Adobe Photoshop Elements version 6 please.
    Thank you,
         Rob

    Unfortunately, even if there were a download link it wouldn't help. PSE 6 had different serial numbers for downloads and boxed versions that were mutually incompatible, and back then you couldn't just enter a serial number into the trial. That's probably why adobe doesn't have a download available for PSe 6.

  • Where  do  I  find  a  link  to  download  photoshop elements  12  ?

    Where can I find a link to download photoshop elements 12  have the license, I just don't have the program to put it in,

    Download Photoshop Elements products | 13, 12, 11, 10
    Thanks,
    Anwesha

  • I cannot download Photoshop Elements 10

    I cannot download Photoshop Elements 10 that I purchased from adobe website by using download link in order comfirmation email. In the begining, the download speed was about 200 kb/sec but after 10 mins, the download speed was down continuously which was below 30 kb/sec. I have waited for 1 day, the download progressed only half way and finally self shut down. I have to re-download again, and now the download speed is only 55 kb/sec.
    I already checked my internet connection, it works normally (the internet speed is about 874.8 kb/sec). Please help.

    Your difficulties do appear to be related to your internet connection.  If you are connecting wirelessly then you may want to try connecting with an Ethernet cable.  Beyond that you might also want to look at your local network and ensure you aren't utilizing any high bandwidth applications such as torrents or streamed videos.

  • I am having trouble downloading photoshop elements 11.

    i pressed the download button next to my order and it brought me to a page where i had to install the installer, which i did and i ran it.   then i went back to the recent order page and pressed download and it brought me back to the page to download the installer.   how do i get out of this loup?

    Please go through the mentioned link and download Photoshop Elements 11.
    http://prodesigntools.com/photoshop-elements-11-direct-download-links- pse-premiere-pre.html
    Please follow the instructions mentioned.
    Cheers
    LP

  • Can't download Photoshop Elements trial Error #2032 appears

    I'm trying to download Photoshop Elements trial but instead of the download button appearing Error #2032 appears instead.

    if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • Downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but not reading docs-look encrypted

    downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but unable to read download- text only doc which reads encrypted

    here's a link to ps elements 11 help (including documents):  http://helpx.adobe.com/photoshop-elements/release-note/photoshop-elements-11-release-notes .html

  • How can I download Photoshop Elements 10?  I had a hard drive crash and need to re-install.

    How can I download Photoshop Elements 10?  I had a hard drive crash and need to re-install.

    if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

  • I need to download photoshop elements on my new laptop but lost the installation disc...

    I have the serial number and solution disk and everything it came with BUT the installation disc. How do I download it on my new laptop without installation disk?

    it is PSE 9
    Krista Pandiscio
    Date: Wed, 22 Jan 2014 10:43:31 -0800
    From: [email protected]
    To: [email protected]
    Subject: I need to download photoshop elements on my new laptop but lost the installation disc...
        Re: I need to download photoshop elements on my new laptop but lost the installation disc...
        created by Barbara B. in Photoshop Elements - View the full discussion
    It would help if you would tell us which version. If it's PSE 12, just install the trial and enter your serial number into that.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6040988#6040988
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6040988#6040988
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6040988#6040988. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Downloading Photoshop Element 12

    Can't download the Download Manager to download Photoshop Element 12.

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

Maybe you are looking for

  • IPod won't sync purchased songs or show album art

    I purchased a brand new 80 gig iPod yesterday, and I'm having slight problems with it. When I plugged it in, it told me that my iPod software was too old and couldn't transfer some of my songs (which ended up being the songs I downloaded from the sto

  • Contact Quick Tasks, Gmail, and Facebook

    This "problem" has been driving me nuts.  I say problem because it annoys me, but it's not a huge deal.  I just want it to WORK. Anyway, I have problems mostly with contact photos. When I first got my phone, the initial sync from Facebook to Gmail/Dr

  • Homesite and Windows 7, anyone?

    Howdy All, As most of us know, Windows 7 is due for release shortly, and I don't like to be behind the times on the OS front. So has anyone here got Homesite running on Windows 7 RC? I do have Windows 7 RC, but I don't fancy installing it just to tes

  • Display of decimals from a formula result

    I work in the healthcare industry and I have been tasked with creating an outpatient dispensing label with an inpatient dispensing system.  This will be used to dispense medication so we need to be able to dispence whole, half and quarter tablets but

  • IPF8100 won't print after installing Mac driver 3.04

    just installed the new Mac driver for my Canon ipf8100 printer (it's driver 3.04). Now when I print a job it spools for a while, then says "cannot find destination. Please check printers power connection". But if I just open the printer utility itsel