Downloading purchases take long time

when i make a purchase from itunes the downloads start at  35-45 minutes
i have reset the box but to no avail

That will be due to your network.
What is your current connection, use speedtest.net
Go to istumbler (Mac) or netstumbler to get a report of the network, check for signal strength and noise
On Apple TV, go to settings - general - network - configure DNS. Should be on automatic.

Similar Messages

  • Why it takes long time to download and udates for iphone4

    why it takes long time to download and updates for iphone4 ?

    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Why do you need this if you are going to Oracle. Try
    removing this. It might be trying things out with the
    old driver and then moving to the new driver. This has nothing to do with it. (And it doesn't "try things out")
    >
    Also check your machines. They might be slow. There is
    no reason, it should take more than few hundred
    milliseconds to connect to a database on localhost as
    your case is.Possible reasons...
    - Network traffic
    - Faulty router/gateway
    - Busy server
    - Faulty network card (either end)
    - Conflict with another box

  • Takes long time for shutdown after adding to domain

    Hi,
    Workstation OS - Window 7
    Domain Controller OS - Window server 2008 R2 standard
    Following thing i have measure with Stopwatch.
    1) When the laptop is in workgroup, it takes just 17 second for shutdown.
    2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
    Why the shutdown time increased so much?
    Do you have any idea?
    Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
    There is no logoff scripts / gpo's as well as we don't have roaming profiles.
    Please advice.
    Thanks & Regards,
    Param
    www.paramgupta.blogspot.com

    Hi,
    To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
    times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
    To get the installer, you have to install the Windows 7 SDK.
    Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
    http://www.microsoft.com/en-us/download/details.aspx?id=3138
    For shutdown tracing:
    Run command:
    xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
    Collect logs and post them for further troubleshooting.
    For more information please refer to following MS articles:
    Long Shutdown Time on Windows 7 Ultimate x64
    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
    Long shutdown time on Windows 7 64 bit laptop
    http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
    Lawrence
    TechNet Community Support

  • Miro execution takes long time

    Hi Experts,
    While posting Credit memo for Purchase returns in MIRO, processing takes long time, it takes hours to complete entire posting.
    For each inputs say while entering PO number, selecting tax code, selecting 'calculate tax' checkbox it takes minimum 10-15 mins for each to process.
    I processed with following parameters.
    PO contains 10 line items.
    Tax code : C2(ED(1021)+VAT 5%)
    Indicator: Goods Items/Delivery Costs/Both.
    Version: EHP4 FOR SAP ERP 6.0 / NW7.01
    Please advice to resolve this issue.
    Regards,
    Sathish

    Hello Sathish,
    this looks very strange. I guess you have some bad performing user exit inside. Otherwise MIRO should not perform that bad for the document with 10 items.
    If you don't want to create an SAP message for that, you can try tracing an execution with ST12 transaction (more details here: http://wiki.sdn.sap.com/wiki/display/ABAP/SingleTransactionAnalysis
    Regards,
      Yuri

  • MIRO take long time when enter invoice for PO with GR-based invoice

    Hi,
    In my client system, system take long time for extracting PO data while booking invoice via. MIRO for the purchase order which have GR-based IV is marked. However system take few second for extracting PO data when enter invoice via. MIRO for the PO which don't have GR-based IV. Please note following point while providing the solution:
    - this problem is exist only for the purchase order related to one company code. However system working perfectly for other company code in the same client. Hence we assuming that some company code level cofiguration is missing.
    - the problem is exist for po with account assignment K.
    - we have one to one mapping for purchase organization to company code to plant.
    Appreciate for you quick respond. Thanks in advance.
    Regards,
    sp sahu

    Hi,
    Please check with FI guy for GL A/c and Cost centers which you are using to create the PO with item category K.
    Still problem permits check with your ABAP person.
    Regards,
    Mohd Ali.

  • Application Load Take Long time

    Hii all,
    i has developed and adf application and oracle 9i database and deployed on a weblogic 10.3.1 using JDBC Data Source an thin Oracle Driver for service connection and then when i run the application from the intranet in the other far building the application loading takes long time and then when loaded it works good so why this long time in loading and how i can fix it or how i can trace it and know where's the problem,, hope anyone can help me because the user wait for 5 minutes to load the application and he got bored my boss will kill me..
    Regards

    Ahmed,
    Have you done any detective work yourself to find out where the long load time is coming from? Are you testing this over a slow network link? If so, have a look at section A9 [url http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/ap_config.htm#ADFUI10059]of this part of the documentation to see how you can perhaps reduce the initial load time.
    If it's not the network, then you can give us some more information about where the long load times are.
    John

  • BPM Process chain takes long time to process

    We have BI7, Netweaver 2004s on Oracle and SUN Solaris
    There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails…</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
    No other loads in CRM or BW when these process chains are running
    CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
    Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
    Attaching a zip file, please refer the “21 to 26 Analysis screen shot.doc” from the zip file
    Within the zip file, attaching “Normal timings of daily process chains.xls” – the name explains it….
    Also within the zip file refer “BPM Infoprovider and data source screen shot.doc” please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
    We have analyzed:--
    1)     The PSA data for BPM process chain for past few days
    2)     The info providers for BPM process chain for past few days
    3)     The ODS entries for BPM process chain for past few days
    4)     The point of failure of BPM process chain for past few days
    5)     The overall performance of all the process chains for past few days
    6)     The number of requests in BW for this process chain
    7)     The load on CRM system for past few days when this process chain ran on BW system
    As per our analysis, there are couple of things which can be fixed in the BW system:--
    1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
    2)     In the definition of destination for the concerned RFC in BW (SM59), the “Technical Setting” tab says the “Load balancing” option = “No”. We are planning to make it “Yes”
    But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
    I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
    Best Regards,

    Hi,
    Normally  index  creation or deletion can take long time in case  your database statistics are not updated properly, so can check  stat  after your data loading is completed and index generation is done,  Do creation of database statistics.
    Then try to recheck ...
    Regards,
    Satya

  • The Application Takes long time to Start

    Hello All,
    We ar eon Unix->64 Bit-> Essbase 11.1.1.3.
    Problem Description : The application is taking long to start up. around 5 to 6 minutes. This is very first time it is happening.
    There were no specific changes done to the application in the recent releases.
    I have tried all options 1. Compacating outline, 2. Purging the application log etc. all other applications respond good on this host except this. Usually any application should not take more than 1 to 2 minutes to start up.
    There are no specific errors or XCP files recorded in the logs and folders.
    Appreciate your suggestions
    MS

    Thanks Jitendra and Prabhas,
    I know i have posted this thread sometime back and later I had to jump on a New release, so did not get time to check your inputs.
    Well I am back on this issue again. I have been working on various option to get this issues solved " start of App takes long time"
    Here are some Details. We are on SunOs 64 Bit, has 12CU with dual core,  with Essbase 11.1.1.3 running on it. This is an ASO application and has just 7 dimensions, Out of which the ORGANIZATION Dimension is pretty huge with Multiple Hierarchies enabled ( Both Stored and Dynamic ) and has more than 20,00,000 members including the alternate hierarchies ( Shared members)
    I did a smoke test by building dimension by dimension the app was startiung up in just *40* seconds. and when i reached the ORG dimension and added more than 70,000 memebrs . there i fall sick. the app now gets back to its old issue ( Takes more than 10 mainutes to start).
    CPU Usage ranges between 3.1 % to 4 %
    PID USER NLWP PRI NI VSZ RSS S STIME ELAPSED %CPU COMMAND
    4424 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep COMMAND
    4428 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep ESS
    4766 user1 88 55 20 6814168 5684200 O 17:37:48 35:45 3.1 /path/xyz/masked/ASO_APP hgfedc NOCREAT.
    But My question here is, in the last moth cube i still similar number of members in the cube and nothing really had changed.
    Essbase GURU's Please give me some Hint to think out of box now.
    Thanks
    MS

  • Report takes long time for few records

    hi frends,
    I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the  report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
    bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
    Thanks
    Mithun

    hi sabhajit,
    i have already checked the sql query it is taking less then seconds.
    any other steps u want me to check then pls let me know?
    thanks mithun

  • Photo both takes long time to open, what can i do?

    photo both takes long time to open, what can i do?

    SO do you think we can get a aunser? i just bout my imac u know!!

  • MVIEW refresh takes long time

    Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
    i executed SQL and it takes ust 1min ( total rows is 447 )
    but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )
    MVIEW configration :-
    CREATE MATERIALIZED VIEW EVAL.EVALSEARCH_PRV_LWC
    TABLESPACE EVAL_T_S_01
    NOCACHE
    NOLOGGING
    NOCOMPRESS
    NOPARALLEL
    BUILD DEFERRED
    REFRESH FORCE ON DEMAND
    WITH PRIMARY KEY
    Not sure why so much diffrence

    infant_raj wrote:
    Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
    i executed SQL and it takes ust 1min ( total rows is 447 )
    but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )A SELECT does a consistent read.
    A MV refresh does that and also writes database data.
    These are not the same thing and cannot be directly compared.
    So instead of pointing at the SELECT execution time and asking why the MV refresh is not as fast, look instead WHAT the refresh is doing and HOW it is doing that.
    Is the execution plan sane? What events are the top ones for the MV refresh? What are the wait states that contributes most to the processing time of the refresh?
    You cannot use the SELECT statement's execution time as a direct comparison metric. The work done by the refresh is more than the work done by the SELECT. You need to determine exactly what work is done by the refresh and whether that work is done in a reasonable time, and how other sessions are impacting the refresh (it could very well be blocked by another session).

  • Takes Long time for Data Loading.

    Hi All,
    Good Morning.. I am new to SDN.
    Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
    Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
    Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
    And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
    Can you please suggest how to improve the performance of dataloading on this Case.
    Thanks & Regards,
    Siva.

    Hi....
    Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
    If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
    Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
    Also check System log in SM21............and shortdumps in ST04........
    Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
    Regards,
    Debjani......

  • The 0co_om_opa_6 ip in the process chains takes long time to run

    Hi experts,
    The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
    I have checked the note 382329,
    -> where the indexes 1 and 4 are active
    -> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
    As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
    -> OLTPSOURCE -  is blank
       PARAM_NAME - OBJSELSIZE
       PARAM_VALUE- is blank
    -> OLTPSOURCE - is blank
       PARAM_NAME - NOTSSELECT
       PARAM_VALUE- is blank
    -> OLTPSOURCE- 0CO_OM_OPA_6
       PARAM_NAME - NOBLOCKING
       PARAM_VALUE- is blank.
    Could you please check if any other settings needs to be done .
    Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
    Please suggest.

    The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
    The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the  u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
    Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
    Thanks Hope this helps ..

  • Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

    After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
    For example : Delete index for 0SD_C03 takes around 55 minutes.
    Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
    Regards
    Madhu P Menon

    Hi,
    Normally  index  creation or deletion can take long time in case  your database statistics are not updated properly, so can check  stat  after your data loading is completed and index generation is done,  Do creation of database statistics.
    Then try to recheck ...
    Regards,
    Satya

  • Database Connectivity takes long time if one of the Node is down .. ??

    Hello All,
    Env: 10.2.0.4 on Solaris 10
    I have 2 nodes.
    When Node1 server is down, it takes long time to connec to the database.
    tnsping would give "OK(2050ms)". Below is the tnsalias.
    RAC_test  =
      (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.123)(PORT= 1521))
         (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.127)(PORT= 1521))
         (LOAD_BALANCE = yes)
              (CONNECT_DATA =
            (SERVICE_NAME = DK.com)
          (FAILOVER_MODE =
            (TYPE = SELECT)
            (METHOD = BASIC)
            (RETRIES = 180)
            (DELAY = 5)
    )I put the trace on sqlnet.ora and found that first it pings to the "20.268.169.123",
    since the Server is down there will not be any reply and this consumes the delay and
    later it would ping "20.268.169.127" and connect to it.
    If i keep "20.268.169.127" above "20.268.169.123" in tnsalias, and keep "LOAD_BALANCE=no",
    it gets connected very fast, as its directly connecting to Node2. In tnsping i get Ok(40ms).
    How do i reduce the connect timing if i use the first step. Why does it take long time for
    Oracle Client to understand that the Node1 Server is down ?
    TIA,
    J J

    I hope the IP's you are using in the TNS are Virtual IP's.
    You must use Virtual IP's / hostnames for the failover to be quick. If Node 1 is not available then then it's (Node 1's) virtual IP would also get assigned to Node 2 hence all client connections are still able to get a response from the Node Virtual IP address without needing to wait for TCP/IP timeouts. This helps clients to get notified immediately that node 1 is unavailable and the connection tries the 2nd ip/host in the connect descriptor.
    Hope this helps.
    - Siba

Maybe you are looking for