Downloading Screen to Text Format

Hi,
Can any one pl. guide me to download SAP Module Pool Screen's to text format.
After downloading to text format uploading it again to SAP.
Thanks,
Shree Hari

Similar Messages

Download a request in text format

Hi,
I want to download a request in readable text format.
How do I go about it?
If I download the data file, it opens in non-readable binary format.
Saba.

Hi,
My problem is that I have a Unicode ECC 6.0 system.
I want to upload requests from 4.7 to ECC 6.0.But since 4.7 is Non-Unicode & ECC is Unicode ,I am unable to upload the requests(for screen layouts) to ECC.
I can upload reports by converting them to ASCII format,but the same is giving errors for requests.
Hence I want to know if there is some way of downloading requests in text format,so that I can get the same layouts in ECC 6.0.

Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

Hi,
When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
it can be downloaded in three cases of
intermittents ways :
- The full message is downloaded in HTML format
- The message is download in text format and a
"Download full message" link is displayed
at the bottom of the message
- The message is displayed in text format,
but continues to download the rest of the message.
When the download is complete, the message is displayed
in HTML format.
This behavior is intermittent. The Apple's support
says it is a particular configuration on Exchange server
that causes this behavior.
I want to know if there is a way to fix
this problem and force download email
either in text or HTML format ?
This problem occurs on iPhones/iPad
(iOS8.2) with ActiveSync account (Exchange 2010
SP3). It occurs also with Outlook.com account.
On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
and MaxEmailHTMLBodyTruncationSize settings are
unlimited in ActiveSync policies.
Thank you for your help.

Hi,
We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
In the console tree, navigate to Organization Configuration >
Client Access.
In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
In the action pane, click Properties.
Under the Sync Settings tab, check or uncheck the box
Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
For more information, please refer to this document.
https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Download of table and its characteristics into text format

Hi all,
How can i download a table and its characteristics into text format.
is there any option to download the table and its characteristics into text format.
if found satisfactory, such answers will be rewarded
regards
samarendra

Hi samarendra,
To download a table and its fields in a Text format file, follow the following steps:
1. Go to SE11 and enter teh database table name.
2. Go to 'Utilities' option in the Menu bar, then go to 'Table Description Generator'
      Utilities->Table Description Generator
3. Give the table Name against the 'Table Names' field in the 'Table Slection' section
     & Execute
4. On Exceuting you are taken to a screen.
    Over there, Go to 'List',->'Save/Send'->'File'
    In the type of file options, select 'Rich text format'. Then give the file name(you are
    able to browse your local hard disk'. The fiel can be a new file also.
Try if this resolves your problem.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

Firefox keeps prompting me to download the newest version. However, if I do that I will lose my text formatting toolbar, which is very important to me. I am on a Mac with Snow Leopard. What should I do?

I don't know the difference between a plug-in and an add-on or an extension. All I know is that I am happy with the current version of Firefox (I think it is 3.6.6) because it allows me to use the text formatting toolbar. The last time I followed Firefox's advice to upgrade to a new version, I discovered that there was no compatible toolbar, and I spent a long time getting back to 3.6.6.
If the new version does not have a compatible text formatting toolbar, I don't want it, and would like to stop getting these prompts.

I'm having difficulty visualizing what is wrong but try some basic steps first:
Launch Safari while holding a Shift key - this will start Safari with just your Home page
If you can see Reset Safari from the Safari menu, try that.
In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

Download sales order data in Text format -User exit

Hi Experts
I am very new to user exits, my requirement is if i go to sales order change mode and then press save, some of the details about the sales order needs to be downloaded in text format. Please give me the steps and procedures.
How to do this, please help me on this.
Regards
Rajaram

Hi,
Go to include MV45AFZZ,u will find USEREXIT_DOCUMENT_SAVE.In this exit
u can get all the data from strcutures availabel thre..declare an internal table and fill the internal table with the data u want..andthen try for FM "GUI_DOWNLOAD" and pass the internal table data.I hope it might work..
Regards,
Nagaraj

Download data to html format

hi
i want to download data from database tables to the html format what is function module for that.
regards
srinivas.

HI USE fm
LIST_DOWNLOAD_HTML
OR CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
       EXPORTING
            RQIDENT              = SPOOL_NUMBER
       IMPORTING
            REAL_TYPE            = G_DOC_TYPE
       TABLES
            BUFFER               = COMPRESSED_LIST
CALL FUNCTION 'TABLE_DECOMPRESS'
       TABLES
            IN                   = COMPRESSED_LIST
            OUT                  = LISTOBJECT
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
       TABLES
            HTML       = IT_HTML
            LISTOBJECT = LISTOBJECT
then you get a HTML include the content of your report in IT_HTML.
You can use the function LIST_DOWNLOAD_HTML to download a list in HTML format
Demonstrate various things that can be done with lists
The first example shows how to have a list go to memory instead of the
screen or a spool, and how to write out that list.
The second set of examples shows how to save the screen list in
various formats
REPORT ZKBTST31.
DATA: MTAB_REPORT_LIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE.
DATA: MTAB_REPORT_HTML LIKE W3HTML OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF MTAB_REPORT_ASCII OCCURS 0,
        LINE(255) TYPE C,
      END OF MTAB_REPORT_ASCII.
START-OF-SELECTION.
*-- Submit a report. This one is the chart of accounts
SUBMIT RFSKPL00
    EXPORTING LIST TO MEMORY           " Save list in memory
    AND RETURN.    " Return control to this program
END-OF-SELECTION.
*-- Get the list from memory
CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
            LISTOBJECT = MTAB_REPORT_LIST
       EXCEPTIONS
            NOT_FOUND = 1
            OTHERS     = 2.
*-- Write the list out
*-- This is a trivial example. A better use would be when the
*-- requirement is to have one report print out several different
*-- reports on the same list level.
CALL FUNCTION 'WRITE_LIST'
       TABLES
            LISTOBJECT = MTAB_REPORT_LIST
       EXCEPTIONS
            EMPTY_LIST = 1
            OTHERS     = 2.
The examples below this line do not require that the report be       *
submitted to memory when run. All that they require is that the     *
report has been written to the screen.           *
*-- Take the current list that has been written to screen, and format
*-- as an HTML file.
CALL FUNCTION 'WWW_LIST_TO_HTML'
       TABLES
            HTML   = MTAB_REPORT_HTML
       EXCEPTIONS
            OTHERS = 1.
*-- Save the list. Same as using System->List->Save->Local File or
*-- entering %pc in the OKCODE box. This function does not need the
*-- include <%_LIST> in a program.
*-- Method can be:
*--   NOCO - No conversion
*--   RTF - Rich Text Format
*--   DAT - Tab delimited Format
*-- When no method is given, a selection screen is presented for the
*-- user to choose the method.
CALL FUNCTION 'LIST_DOWNLOAD'
     EXPORTING
          METHOD     = 'NOCO'
       EXCEPTIONS
            OTHERS     = 1.
rEWADS IF HELPFUL

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

Can Pages 4.3 maintain defined text formatting for at a given list level?

I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?

Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh

Error while downloading output in excel format using FM Gui_download

Hello All,
<removed by moderator>
While downloading the necessary output of a Ztransaction in excel format the excel file only shows one 1 record whereas in the output there were 88 records.
When I am downloading it in other formats like Rich text etc. the data is getting downloaded correctly as per the output.
Now this problem is occuring in Production & Quality whereas in Development the excel file is downloading data correctly.
I have compared the code in the different clients as well as debugged it but the code is the same in each case.
There is no data corruption in the final internal table as well.
So what else can be done?....
The data needs to be downloaded as it is in the output in the excel format.
Kindly give me some suggestion and help me out in this regard.
Edited by: Thomas Zloch on Nov 1, 2011 10:04 AM

Hi,
Did you the use the GUO_download using the following values:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename         = fullpath
    filetype         = 'ASC'
    codepage         = space
    write_bom        = 'X'
TABLES

PDF looks fine on screen but text does not print

PDF created from Word looks fine on screen but text does not print (graphics do). Alos loses text on FTP or Email. Windows 8.1 64bit. Acrobat XI Std. Word2013. Print to PDF from Word 600dpi, use doc fonts, download as softfont. Arial, calibrai - all fonts lost. Same issue as Phillipio61 and alacker2?.

Problem not with all fonts. Problem with arial and calibri fonts - maybe others. Times New Roman, gil sans, viner are OK for example.

DOWNLOAD SMARTFORM IN TXT FORMAT

NORMALLY WE DOWNLOAD SMARTFORM IN PDF FORMAT BUT I HAVE REQUIREMENT TO DOWNLOAD IN TEXT FORMAT.
PLEASE HELP.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jul 24, 2008 6:24 PM

when you generate the spool you can down load that in txt format
Function is used RSPO_DOWNLOAD_SPOOLJOB when you want to do that programatically.
Using the spool number, and provide the path where you want to down load that time mention the name
C:\smart.txt
it will be downloaded .

Download file in txt format

Hi,
Im using Forms 6i,
The output data is not spliting into lines by line .in between the lines there is a small box.If i open the same file in word itis spliting line by line.
PROCEDURE do_based_customers (p_org_id in number,p_user_id in number,p_inv_org in number,p_location in varchar2,
          p_route in varchar2, p_dodatefrom in date,p_dodateto in date, p_dofrom in number, p_doto in number) is
l_path varchar2(100) := '/export/home/loadman';
l_filename varchar2(20000) := 'hht_cust_'||sysdate||'.txt' ;
l_buffer varchar2(80) := 'this is a test';
l_outfile utl_file.file_type;
cursor c1 is
select * from table;
begin
l_outfile := utl_file.fopen(l_path, l_filename, 'w');
for rec1 in c1
loop
     l_filename := rec1.cust_code||'~'||rec1.cust_name||'~'||rec1.ROUTE_CODE||'~'||rec1.LOCATION_CODE;
          utl_file.put_line(l_outfile, l_filename);
end loop;
utl_file.fclose(l_outfile);
exception
when others then
utl_file.fclose(l_outfile);
dbms_output.put_line(sqlerrm);
end do_based_customers;
Thsi is the code to download the data.Itis saving in a TEXT FORMAT.
Can any one help me in this to get reslove my problem.

Maybe you need ot issue unix2dos -ascii oldfile newfile on the os.

Report in text format

I have a report need to send (output) in text format thru form 6i , please help

Hi,
Try adding there parameters when calling the report. (To view the report, the DESTYPE parameter will be SCREEN
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
-- If you didn't mention the DESNAME parameter, then the output will be generated in the application folder named report_name.lis
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_path>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Downloading Screen to Text Format

Similar Messages

Maybe you are looking for