Downloading Service Pack 1 from Windows Update

I have a laptop I just restored Windows 7 Professional from a recovery disk and have run 1indows Update till there are no more updates to be applied. However Service Pack 1 is unavailable to download. I don't want to apply SP1 from a download
site but I will if that is the only way. Is there a way to get SP1 from Windows Update or where is the best download location to get a convenient simple download of SP1? Thanks.
Michael T. Glenn
Michael T. Glenn

Hi Michael,
How did you get that SP1 update?
As Arnav provided, these address are all available.
In addition, please follow these steps to check if your computer have already installed SP1.
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
Karen Hu
TechNet Community Support

Similar Messages

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

SAP List of Supported SQL Server Service Packs and Cumulative Updates

Does SAP provide a list of SQL Server Service Packs and Cumulative Updates that will work with BPC 7.0 and 7.5? I see that CU 12 is out for SP1 and CU 2 is out for SP2. I would like to know if I can move the SP2 CU2 or SP1 CU12. My install docs are outdated specifying SP1 CU6.
Any direction is appreciated.
Joe

Hi,
Please take a look at the below list of the supported OS: This excerpt is from the installation guide.
SP04 or later: Windows Server 2008 R2 Standard or Enterprise Edition with or without Hyper-V
Windows Server 2008 Standard or Enterprise Edition with or without Hyper-V, or
Windows Server 2008 Data Center with or without Hyper-V
Windows Server 2003 Standard or Enterprise Edition SP2
Windows Server 2003 Standard configured on the SQL database or OLAP server components only
Windows Server 2003 R2 Standard or Enterprise Edition SP2
SAP recommends using Windows Server 2008 64 bit over Windows Server 2003 64 bit. Otherwise, supportability is limited.
I am not sure what did you mean by the front end. Having said that, 32 bit is supported both on the server and the client machines.
Hope this helps.

Is contract support account required to download Service Pack V3 forWLS 8.1

Dear all:
I uesed tool Smart Update to install Service Pack V3 for WebLogic Server 8.1. The poped window asked me to login.
After I finished input of ID and password, it said that my account is not linked to a valid contract. Is Service Pack V3 for WLS 8.1 not a public pitch? Is a contract support account required to download Service Pack V3 for WLS 8.1? Or is there something wrong?
Thanks for response.

> we have a local installation for our developer unfortunately we don't use a SolMan. I had to download the files by my self.
I see - you may be able to put the files in the download basket but without SolMan you won't be able to confirm and hence download them (or you have to create an OSS call).
There may also be dependencies of Java patches and kernel patches or other components. Resolving them manually can be tedious.
Markus

Go Daddy UCC Certificate: "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update"

Hello,
I have this issue regarding certificate chains while performing Outlook Anywhere connectivity test
by Microsoft Remote Connectivity Analyzer:
"ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled."
Note: even if I got the error, Outlook Anywhere and
ActiveSync services work fine.
Environment:
- Exchange 2007 with SP3
- Go Daddy Multiple Domains UCC certificate (up to 5 Subject Alternative Names)
I already read and followed instructions on this TechNet post
Can I safely ignore this warning about the SSL cert? Using GoDaddy UCC cert but it is a little bit different by this case.
So after an investigation I understand the issue above is related to SSL certificate
Certification Path (see screenshots below).
NO ERRORS on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Intermediate Certification Authorities
repository
Starfield Technologies (http://www.valicert.com)
is under Trusted Root Certification Authorities repository
ERROR on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Trusted Root Certification Authorities
repository
Can you add some useful information ?
I'm opening a support ticket at Go Daddy; I hope they could me some positive feedbacks.
Regards,
Luca Fabbri
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.

Strange I have a feeling the exrca tool can't validate the godaddy class2 root authority due some older compability and wants to use the older original root authority valicert owned godaddy. Or when the exrca tool is validating the root CA it only has the
goaddy class2 root ca that was issued by valicert and not the standalone cert when doing the comparision. I sent the question to MS and will let you know when I hear back.
You can get rid of it
https://certs.godaddy.com/anonymous/repository.seam
Download the cert
◦gd_cross_intermediate.crt
Then import it into the trusted root cert authority on your CAS boxes. Then you need to delete the other godaddy class2 root authority. Make sure you see the one you imported both will be named goaddy class2 root authority but one will be issued by valicert.
Re-run the test and it will go away, I also saw the error with my domain as well using godaddy and got rid of it by using the new cert authority.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
Conexant - Audio Device - Conexant SmartAudio HD
10.01.2014
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
04.06.2014
Should I install those updates or should I keep the original drivers?
The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
Conexant Audio Driver for 64-bit Windows
8.65.3.53 10/22/2013
Integrated Graphics Driver for 64-bit Windows
Windows 8.1 (64-bit)
9.17.10.2843 10/23/2012
Intel Video Driver for 64-bit Windows
10.18.10.3282 10/22/2013

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

Should I run a Full Crawl after running psconfig after updating Sp2013 with a Service Pack or Cumulative Update

Hi
Should I run a full crawl after I have performed a Service Pack Update or Cumulative Update and run psconfig wizard?
The best practise coming out of Microsoft says you should only run a full crawl after a configuration change.
You should then run a continuous crawl thereafter.
The question then becomes is a Service Pack Update / Cumulative Update followed by psconfig wizard (or the PowerShell equivalent) considered to be a configuration change.
We were recently advised by Microsoft to install the July 2014 CU (and then run psconfig).
After that the continuous search did not pick up newly created files until a full crawl was run.
So should I run a full crawl after I have installed a Service Pack or Cumulative Update and run psconfig ?
Thanks
Nigel
Nigel Price NJPEnterprises

Hi Nigel,
The situations when you need to do full crawl is listed here,
A Search service application has just been created and the preconfigured content source
Local SharePoint sites have not been crawled yet.
Some other content source is new and has not been crawled yet.
A software update or service pack was installed on servers in the farm. See the instructions for the software update or service pack for more information.
A Search service application administrator, site collection administrator or tenant administrator added a new managed property or changed an existing managed property. A full crawl is required for the new or changed managed property to take effect.
You want to detect security changes that were made to local groups on a file share after the last full crawl of the file share.
You want to resolve consecutive incremental crawl failures. If an incremental crawl fails a large number of consecutive times at any level in a repository, the system removes the affected content from the search index.
Crawl rules have been added, deleted, or modified.
You want to repair a corrupted search index.
The credentials for the user account that is assigned to the default content access account have changed. A full crawl is required only if the permissions of this user account have changed.
My opinion is, it is always better to do a full crawl after a successful installation of service packs or product upgrades.

How I can download mavericks OS from windows device and install it in my macbook air?

from my mistake I formated my device (macbook air 2013) when i am trying to install windows by using boot camp
and now i cant boot my device becuse it doesnt have OS
how I can download mavericks OS from windows device and install it in my mac?

hmmmm no need for windows device. simply hold down Command and R at start up it will install recovery HD and then u can install OS, for that u need a stable and good speed internet. so fist connect your Mac with internet and then start it by holding cmd and r after that it will do all the work.

Install the latest Service Pack and Cumulative Update

Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.

Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Since upgrading the software on my iPhone 3GS to the iOS 5 i have not been able to sync my iphone. It is not my internet securtity causing the problem, I have just downloaded service pack 3 for windows XP and i have uninstalled and re installed itunes! ?

Since Upgrading the software on my Iphone 3GS to the iOS5, I have not been able to back up my on my laptop, it starts syncing then kicks me out.
I have uninstalled my internet security and that is not the problem (so re-installed)
I have updated the Windows XP to service Pack 3
I have un installed and re installed iTunes as well
And none of this has worked!
I was going to upgrade my phone to the iPhone 4S but dont feel i can now as worried it wont sync.
Please can anyone help me as this is rather frustrating now!
Thanks
Morris1979

***, a text I tried to send but saved,chops up and pastes in the forum question in my attempt to reach out for a technical resolve of my phone, not my heart. Hahaha.

Download non-english updates from Windows Update Catalog

Hi, I would like to integrate all updates to install image. However, I must select all language of each updates on Windows Updates Catalog each by each. Any idea to download all updates with differance language as easier?
thanks

Hi,
I'm afraid that it is inevitable and you have to tick "Select all" for each update if you want to download all language of Updates. Why do you want to integrate all language updates into an image? if you need additional language user
interface, then you just need language pack added to your image.
Yolanda Zhu
TechNet Community Support

CrystalReports XI release 2 Downloaded service pack setups don't work

Hi
I am an existing customer using Crystal Reports Developer XI Release 2.
I tried to install latest Crystal Reports XI Release 2 service pack5 for windows and it did errored out between the install saying a cab file was corrupted. Tried couple times but no luck
Tried then installing earlier version i.e Crystal Reports XI Release 2 service pack 4 full build but it did the same. It had corrupted cab files too and errored during install.
The version that I have is Crystal Reports XI Release 2 Hot fix -crxir2.zip from 13Feb08 on your site. I am trying to update my machine with lates service packs so my MSM/MSI that I distribute match with version on my machine

Hi
If you are using Windows 2000 SP4 then install the "Update Rollup 1 for Windows 2000 SP4 (KB891861)" should resolve the error message for missing cabinet file when installing SP4 on Windows 2000, as stated in Release Notes of SP4.
Below is the link to download the Update Rollup 1 for Windows 2000 SP4 (KB891861):
http://www.microsoft.com/downloads/details.aspx?FamilyID=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en and http://support.microsoft.com/?kbid=891861
Then install SP5 for Crystal Report XI R2.
Hope this helps!!
Amit

Unable to switch from Windows Update to Microsoft Update

On a new Windows 7 64 bit computer I am unable to access Microsoft updates. Windows update works fine, but when I click the link to get updates for other Microsoft Products it will only take me to the screen that tells me to use the start menu to check for
updates. I have also tried other links to Microsoft Update from other Microsoft webpages and end up with the same result.
I have Office 2013 Standard installed and activated, and from previous installation experience know that I should be able to access numerous updates through this method.
To verify that I am able to install updates for Office I manually downloaded and installed one Office 2013 update through the Microsoft download site.
How do I get this machine to switch to Microsoft Update?

Hi,
According to your description, I think you may had a misunderstand between these two updates installation. Here is a paragraph which talking about Use Windows Update to Check for Updates to other Microsoft Products:
By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft
Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.
If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside
this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”
From: http://technet.microsoft.com/en-us/magazine/ff642466.aspx
Hope this helps. If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support

IQ770 crashed after service pack 1 automatic update.

after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?

hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
Message Edited by WendyM on 08-24-2009 08:13 AM

Downloading Service Pack 1 from Windows Update

Similar Messages

Maybe you are looking for