Downloading shockwave using windows 98

trying to download shockwave but unable. Have Pentium III 450
MHz with 128 RAM using Windows 98 2cd ed. After I press shockwave
download icon, it says that the control is not adequate and that I
need to upgrade to new shockwave control. Can't seem to do that
though. Please advise.

I have a Zen Xtra 40GB and I'm using Windows 98SE and I have not been able to get things to work. I tried using the installation disk and it could not complete the install....it would hang up at the point where the drivers were being loaded. After some playing around I got the drivers installed, but Nomad Explorer did not see that the MP3 player was connected. I also tried MediaSource (it loaded on just fine) and it recognized the player, but would crash when the program tried to "read" from the player. I plan to return the player and get my money back.

Similar Messages

  • On one mac, is it possible for just one user to download and use windows, or will it force all the users to use windows?

    I want to download windows on the guest identity, so that I can play pc games (which only work on windows), but I dont want to have to use windows on my regular user identity. Does anyone know if it will only download for the one user?

    no user is forced to use Windows.

  • Just setup a new computer and cannot get Firefox to download. Using Windows 7.

    Just set up a new computer running Windows 7. Used Internet Explorer to find the Firefox web site. When I try to download, I get a message saying site is unavailable.

    Hi and Welcome to the Community!
    Here is a KB with instructions:
    KB03315 How to synchronize organizer data (calendar, task list, memo list, and contact list) using the BlackBerry Desktop Software
    Unfortunately, from the level of detail in your post, it's useless to try and guess what is going on in your situation. Please try that KB and, if something does not work, be very very detailed in describing for us what is going on.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can't get adobe flash player to regester once I have downloaded it using window xp

    I can't get my adobe flash player to run once downloading it.

    I CANNOT BELIEVE THIS WORKED. WOW!!! This past weekend I have spent more hours than I care to remember to get Flash Player 13 installed on my Windows XP computer. I am computer savay...but this was a total enigma for me. I followed the Adobe trouble shooting page and tried everything to a T. No good! I even tried a posting on the MS Community where I downloaded an Adobe uninstall program, then rebooted my computer, then downloaded a "SubInAcl" program to a folder and then downloaded a "reset_fp10.zip" file to the the same folder...clicked on this .bat file and ran the SubInAcl file...then tried to download Flash Player at the Adobe website...and got the same error message..."Failed to Install." This was a half hour ago...after trying last Friday evening, Saturday and Sunday...and today. Then it dawned on me as a last resort to try this Adobe Forum. It is beyond me why on the Adobe Troubleshooting installation web page that there was no mention of this simple solution...or I did not see it.  I have spent hours searching the Internet and found no such solution as yours...running the "Flash Player 13 MSI Installer."  I can't thank you enough after hours and hours and hours of trying to fix this problem...lo and behold...YOUR RECOMMENDATION WAS THE FIX. Thank you so much. I am most appreciative.

  • Cant download itunes 10 using windows vista error installation of assembly policy 8.0 microsoft VC80.CRT

    cant download itunes 10 using windows vista erroe about installation of assembly

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • I bought and downloaded some music off of the internet on my laptop that uses Windows 8. How can I get my music to open automatically in my itunes instead of opening in the music app?

    I bought and downloaded some music off of the internet on my laptop that uses Windows 8. How can I get my music to open automatically in my itunes instead of opening in the music app (the orange sqaure with headphones)? Currently I have had to often downloads and sift through all my files to find the ones I want to open into itunes, and it's irritating.

    Media is only where the user puts it.
    Installing iTunes does not and has never caused media to magically appear on the computer.
    Copy the ENTIRE iTunes folder from the old computer (or backup of the old computer) to the new computer.

  • HT1414 using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything was going routine until the phone had been going thought what I though

    I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought what I though was the update process, when an error window opened up and it said that an error had occured and the iPhone 4 could not be updated. I have never had a problem like this before and it caught me off guard and I did not note all the information in the error window, but it did not appear to indicate anything other than that I would have to abort the update and did not think it would be that big of a problem. I tried to disconnect the phone and was going to do the update at a different time when I could investigate what the problem was. However I could not get iTunes to recognize the iPhone 4 after this and still cannot. After rebooting the laptop a few times and also trying to reset the phone a few times as well, I just have a dead phone. The iPhone 4 just has the image of a USB cable with an arrow pointing to an icon for iTunes. I have tried to get iTunes to recognize the iPhone, but cannot get it to. I am unable to do anything else with the phone. It seems like the phone is in a state where it does not have enough software loaded to do anything or I don’t know how to get it to. Any suggestions how I can get my iPhone 4 back into service. Note: iTunes still recognizes my iPad and iPods, so iTunes seems to be okay to me. Craig

    I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
    If you didn't sell it in al this time

  • I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

    I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

    Hi jstutsman,
    If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
    iPod not appearing in iTunes - Apple Support
    Regards,
    - Brenden

  • Unable to download itunes using firefox on windows 7

    I'm using windows 7 and when I click the download link on http://www.apple.com/itunes/download/ it brings up the prompt to save and I click save but there is no download performed - the file does not exist and is not listed in the "Downloads" drop down option.
    Apple assumes it's downloaded http://www.apple.com/confirm/itunes/thankyou.html and states "Now that you’ve downloaded iTunes, you’re just a few steps away from starting a digital entertainment collection and enjoying it on your Mac, PC, iPad, iPhone, or iPod."
    HELLO the download did not occur.
    Most site will offer a link that states - if your download did not begin click here and have a means to start it again but not Apple they are sure it's done.
    Any one out there know what's wrong with the download page or a way to get iTunes from another source on apple's site?
    -edit moments later
    That "thankyou.html" page loading before the end of me clicking save and selecting where it's saving was causing the download to not initiate properly
    I saved it as quickly as I could and surprisingly the download succeeded to begin.
    Apple website developers should be notified of that error/behavior so it can be fixed - simply don't load the thankyou.html page until the install is completed maybe

    See my response in the I am unable to download iTunes with Windows XP using firefox?  I am told it's a binary file and tells me to "save" it.  Once downloaded it does not open up.  Anyone have any ideas why? thread.

  • Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?

    Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?  The files seem to be there but I don't know if they are being backed up to cloud.

    Hi, DickmoAZ.  
    Thank you for visiting Apple Support Communities.
    This sounds like a permission issue most likely with the iTunes Media folder.  Here is an article that will help you troubleshoot this issue.
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Cheers,
    Jason H.

  • I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

  • HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    uhm hey guys,
    idk where else to get help so ima try here,
    i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
    do you know what i should install ?
    but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
    Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

  • HT4061 got iph 4s; using windows 8; downloaded latest update and iphone software update center could not be contacted or is unavailable......??  disabled firewall, disconnected all other usb devices, still not restoring; any one have any suggestions?

    iph 4s, using windows 8; downloaded latest update 6 for iphone and iphone software update center could not be contacted or is not available; tried troubleshooting; removed other usb connections and restarted computer; still will not connect to iphone software update center; any suggestions?

    I noticed the Windows Firewall Entry in the diagnostics, so I did get that part squared away...
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-07 17:52:33.
    Still unable to detect the iPhone though.

  • How do I know if I have bootcamp on my computer? And if I swtich to run windows, can i download and use Authorware?

    I am not 100% sure if we have bootcamp on our computers. How can I be sure? And if I do not have it, can i get it and for how much?
    Also if I use bootcamp to switch from the mac os to a windows os, can i download a plug in that is not compatable with Mac and use it?
    We purchased our iMacs in 11-2010. We LOVE them. We will never switch back. However, the attorney that I work for has to do online training with a Sheriffs dept to maintain some of his credintals. We check with the help desk and they just do not support any apple products. Their online training requires two plug ins, Adobe flash, which we have, and Authorware, which will not work on our macs. And like I said the website's help desk just doesn't support any apple use.
    Any help/advice would be greatly appreciated!

    Boot Camp Assistant is included on the OSx installation disk. There is no charge. Boot Camp Assistant is used to create a Windows partition on which you install the Windows operating system.
    You need to buy a retail version of Windows. Once Windows is installed on the Boot Camp partition you can boot your computer into OSx or into Windows.
    You can install and use Windows software when you are booted into Windows.
    There is a Boot Camp Installation Guide on your installation disk.

Maybe you are looking for