Downloading/ Viewing Notes Created on a N96 to an ...

Hello All.
Does anyone know of a process where one can:
1) View 'Notes' created on my N96 on an Apple Mac (i.e. using the Nokia Multimedia Transfer app).
2) Download/ Sync the Notes file(s) to an Apple Mac.
Please note that I've installed the Nokia Multimedia Transfer application. It's a very powerful app, but I can't see where Notes are stored.
Thanks,
K 

You can sync your phone with Outlook, export the Notes in Outlook as vCalendar, import those vCalender to the Mac.
Mac iCal allows the vCal importing. I'm not sure if it allows a batch importing, but you can check "Exporting calendar to a phone" 
What's the law of the jungle?

Similar Messages

  • Views not created in Oracle.

    The Migration process did not create views in the oracle schema. The access source database has 60 queries. There are no errors in the error log about view creation. As I understand, the migration process should convert the queries in access 2000 as views in Oracle 9i. Any ideas? Thanks in advance.

    Hi,
    You mention that the MS Access database contained 60 queries. Can you please verify the following:
    1. In the Source Model of the Migration Workbench, a node titled "Queries(60)" is displayed in the database tree.
    2. In the Oracle Model of the Migration Workbench, a node titled "Views(60)" is displayed in the Users | <database_name>.
    Basically for each captured MS Access query, there should be a corresponding view created in the source model. If errors were reported during the mapping phase, then such errors will not be reported in the error.log file. I would suggest reviewing the contents of the Log Window and check for any parsing errors reported during the Capture phase of the migration process. You can access the Log Window via the Tools | Log Window menu option of the workbench. From this window, select the Edit | Preferences menu option and select "Error Messages" to just display any reported error messages. Please refer to the documentation for further information on the migration of queries. Some may require manual changes, if they failed during the parsing process.
    I hope this helps.
    Regards,
    Hilary

  • CUA: Model view not created automatically in Child System

    Hi, I try to create a CUA with just a child system thru txn SCUA. The result of generation is good and all green. The part that is not right is I do not see the model view created in txn BD64 of child system, I can see it created in master system. Both RFC of master and child system are working fine. I do not see errors at WE20 & WE21 as well. Under this situation, I can see CUA active in master system but not child system. Hence, CUA is not working as it says in master system.
    I have setup CUA couple of times before but this is the first time that I encounter such a weird situation. Does anyone has any clue where could have gone wrong?
    Edited by: Annie Chan on Jul 25, 2008 5:23 PM

    Hi Everyone,
    It is indeed a RFC issue but it was a silly mistake with the incorrect hostname that I am suppose to connect to. Hence, the Distribution Model doesn't exist in the child system. Nervertheless, your advise does point to the right direction.
    Thanks so much for your input. Points are granted as accordingly.
    Regards,
    Annie

  • ASCP Roll up materialized View not created

    Hi ,
    I applied ASCP RUP#38 8639586. A worker failed while creating materialized View.
    FAILED: file MSC_PHUB_CUSTOMERS_MV.xdf on worker 4 for product msc username APPS
    When i checked to the worker log it had following errors
    Exception occured ORA-04063: package body "APPS.MSC_PHUB_UTIL" has errors
    ORA-06512: at "APPS.AD_MV", line 124
    ORA-06512: at "APPS.AD_MV", line 258
    ORA-06512: at line 1
    java.sql.SQLException: ORA-04063: package body "APPS.MSC_PHUB_UTIL" has errors
    ORA-06512: at "APPS.AD_MV", line 124
    ORA-06512: at "APPS.AD_MV", line 258
    ORA-06512: at line 1
    can anyone help me solve this issue.
    Thanks
    H2B

    did you complied invalid objects..?
    need some help understanding the way materialized views are applied through
    Edited by: 3Amigos on Dec 16, 2010 2:53 AM

  • Firefox 4 recently downloaded will not create a dial up window. The only way I can get it to work is by establishing a connection via oulook. Firfox then works fine. How do I get Firefox 4 to reqest a dial up window

    Since we downloaded Firefox 4 we have only been able to connect to the internet by using the dial up of outlook. Once connected in this way Firefox 4 works fine.
    We have zone alarm firewall and NOD32 antivirus.

    I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
    I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
    I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
    I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
    to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
    Hope that helps,

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Bug: Can not create materialized view log on 11G XE

    Hi,
    I log in as HR user and try create materialized view log
    CREATE MATERIALIZED VIEW LOG ON HR.EMPLOYEES;I get error
    >
    Error starting at line 1 in command:
    CREATE MATERIALIZED VIEW LOG ON HR.EMPLOYEES
    Error at Command Line:1 Column:0
    Error report:
    SQL Error: ORA-00439: feature not enabled: Advanced replication
    00439. 00000 - "feature not enabled: %s"
    *Cause:    The specified feature is not enabled.
    *Action:   Do not attempt to use this feature.
    >
    You can create materialized view log on 10G XE without any problem.
    Regards,
    Jari
    http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0

    Is it a bug in 11g or 10g?
    It was reported earlier in now archived beta forum. {thread:id=2214092}
    The current doc lists MV sites only (and "No" for Advanced Replication feature):
    http://download.oracle.com/docs/cd/E17781_01/license.112/e18068/toc.htm#BABDFDAI

  • Strange Content Viewer problem: downloads do not 'stick'

    I had a folio that  needed to be downloaded it appeared after updating to the latest Content Viewer on my iPads (Retina, mini Retina and standard iPad2).
    For some reason after quiting Content Viewer on my iPads and starting the Content Viewer app again, tapping to see that folio resulted in a empty screen on my iPad. It seemed that Content Viewer app crashed.
    After quiting the app again and restarting the app , it said the folio was in the cloud. I needed to download again.
    From that point on you can repeat those steps again and again: download; read; close Content Viewer app; start Content Viewer app; read folio: empty and crash;  restart Content Viewer: folio gone from iPad and needs to be downloaded again. Repeat.
    I tried removing the downloaded version from the app and re-download: same result.
    I deleted the Content Viewer from my iPads and reinstalled from App Store: same result.
    I then completely rebuild the folio in InDesign under another CC account. Logged in on my iPad under that account, downloaded the rebuild folio... And I can repeat it all over again... The download does not 'stick' and crashes the Viewer app.
    Then I tried this with completly new fresh folios from fresh new InDesign pages... Same result!
    But... On my iPad2 it seems fine. On my Retina iPads it goes wrong. Also covers are missing and I see double entries (it shows already downloaded folios!).
    There are no renditions, just 1024 PDF file. Tried it with v26 and v29 compatibility, makes no difference.
    I am stumped... I have no clue where to even begin fixing this other than the steps I already took mentioned above...
    Could non-ACSII characters in the title be the cause ( it has a slash and copyright sign)? No, that seems to make no difference...
    Bug...?

    I'm still affected by this. What is the status?
    I have a folio with no upper ASCI characters in its name or any article names. created with Folio viewer version v26. My iPad has the latest ACV (3.4.5) on ipad Retina with IOS 7.1.
    Exactly the same symptoms same as described by others - After viewing my folio, if I close the ACV viewer with swipe up on IOS7 and I restart the ACV, I get a grey blank screen & crash, and have to close the app with Swipe up. When I restart ACV, the library updates and I must download the folio again. Then cycle starts again...after download competes I can view the folio....Basically the folio is never saved to the iPad, after its first viewing.
    The Folio has an autoplay slideshow in its first article. Don't know if there is anything else relevant I can add to help?

  • Notes created in the calendar view

    I have notes attached to events in the calendar.  They copied over in the original hot-sync.  New notes, created in palm desktop are not being attached to the event in the phone view.  I use a Centro on Mac.
    Post relates to: Centro (Sprint)

    From my understanding the Lotus Calendar integration is designed to show only events created from the collaboration room on the room calendar 'Appointments' tab.  It should use everyone's full Notes calendar when in the 'Availability' view during scheduling of new events.  I believe there is a tab called 'My Appointments' on the calendar iview which should show the active user's Notes calendar including all of their events, scheduled through either Notes or the room.

  • I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase

    I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase the CC at discount price.

    Moving this discussion to the Adobe Creative Cloud forum.
    Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

  • View not copied or enhanced with wizard Error while creating Event Handler method in Z Component

    Hello Friends,
    In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
    I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
    But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.

    Hi,
    Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters.  I dont have have the system right now. Please check any existing event import export parameters.
    Check out do handle event method in the same class.
    Redefine that method.  Call that event method in this handle method. See existing code for reference.
    Attach that event to the button on click event in .htm page.
    Regards,
    Bhushan

  • BDoc's not created when downloading certain partners

    Hi,
    we have a problem when downloading certain partners from R/3.
    Adapter Object  CUSTOMER_MAIN
    Source Site: ECC 6.0
    Target Site: CRM 2007
    For certain partners, BDocs are regularly created, for some the status is "OK - green" in R3AR but when trying to search for BDocs there is a message "No BDocs found for this Request / Initial Load".
    Clearly the partners are not created and present in BP.
    Anyone encountered this error?
    Thank you

    Hi,
    If there is a valication error or an error in update task at the CRM system, the BDocs shoudl ideally be in interrmediate state.
    However you can still search for entries in transaction sm13 to check if there are any update failures. Also make sure that
    you are not searching for only fully processed BDoc in smw01.
    If none of the above holds good, there would be some sysfail for  R3AI_BUPA* in smq2. Please check the above. If still in doubt, reply back.
    Best Regards,
    Shourav

  • MATMAS IDOC not creating required views

    Hi
    We have a scenario where an external system is sending material master data to ECC via PI. The msg type used is MATMAS03. The data gets processed successfully in ECC but does not create the basic data views. The inbound idoc has many fields which belong to basic data views, yet the views that have similar fields other than basic data get created. We have checked the configuration for screen sequencing (Industry standard sequence) and analysed the function module used for inbound processing of idocs. We did not find anything wrong with them. We see that the VPSTA and PSTAT maintenance fields get populated with all other views other than Basic data 1 and 2. This is automatically handled by SAP standard logic.
    Does anybody have any idea what could be causing this? Any troubleshooting tips will help.
    Thanks
    Arvind

    do you have a valid warehouse number and data for your warehouse in the IDOC?

  • Not able to view the created respository in ACS server

    Dear All,
    I am not able to restore the taken backup & even it is not showing me option which is disabled in GUI.
    I have tried to restore the same though CLI.
    But i am not able to view my created backup repository.
    Below is the command which i used;
    MMKNDACS/acsadmin# show repository ACS_BACKUP
    % Protocol does not support listing directories
    MMKNDACS/acsadmin#
    this is error i am getting while executing.
    Please help me to resolve the issue ASAP.
    Thanks & regards ,
    sakthivel P

    MMKNDACS/acsadmin# show run
    Generating configuration...
    hostname MMKNDACS
    service sshd
    repository ACS
      url ftp://190.3.166.133/
      user test password hash 71a6b29f4625151a11984ddbb6fffeff0a592a4f
    repository ACS_BACKUP
      url tftp://10.2.152.51/ACS
    repository FTP
      url ftp://190.3.70.45/
      user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
    repository TEST
      url ftp://190.3.70.45
      user test password hash 97dc37c94236ec1b4c56871c2e482cbd6f56bd33
    repository upgrade
      url ftp://190.3.70.45/
      user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
    logging localhost
    logging loglevel 6
    kron policy-list policyList_acs
      cli acs scheduled_backup acs repository ACS_BACKUP
    kron occurrence occurrence_acs
      at 22:00
      recurring
      policy-list policyList_acs
    icmp echo on

  • "Could not create the view" error

    Hey everyone,
    I'm new to Flash Builder and have been following a tutorial video to learn the basics. Today, when I tried to access my project, this error appeared in the Package Explorer:
    Could not create the view: Plug-in "com.adobe.flexbuilder.as.editor" was unable to instantiate class "com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer".
    I also can't seem to create a new Flex project. If I try to, I can never click Finish. The button just remains faded out.
    Below are the details on the package explorer error.
    Any help would be much appreciated.
    Thanks.
    java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/common/CMFactory
        at com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer.<init>(FlexPackage Explorer.java:263)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
        at java.lang.reflect.Constructor.newInstance(Unknown Source)
        at java.lang.Class.newInstance0(Unknown Source)
        at java.lang.Class.newInstance(Unknown Source)
        at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:170)
        at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:874)
        at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
        at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:51)
        at org.eclipse.ui.internal.WorkbenchPlugin$1.run(WorkbenchPlugin.java:267)
        at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
        at org.eclipse.ui.internal.WorkbenchPlugin.createExtension(WorkbenchPlugin.java:263)
        at org.eclipse.ui.internal.registry.ViewDescriptor.createView(ViewDescriptor.java:63)
        at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:324)
        at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:226)
        at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
        at org.eclipse.ui.internal.WorkbenchPage$ActivationList.setActive(WorkbenchPage.java:4212)
        at org.eclipse.ui.internal.WorkbenchPage$18.runWithException(WorkbenchPage.java:3271)
        at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
        at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
        at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
        at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
        at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
        at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
        at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
        at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :109)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Caused by: org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter$TerminatingClassNotFoundExce ption: An error occurred while automatically activating bundle com.adobe.flexbuilder.codemodel (16).
        at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:125)
        at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :449)
        at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:211)
        at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:381)
        at org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(SingleSourcePackage.java:3 3)
        at org.eclipse.osgi.internal.loader.MultiSourcePackage.loadClass(MultiSourcePackage.java:31)
        at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:454)
        at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
        at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:398)
        at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:105)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)
        ... 51 more
    Caused by: org.osgi.framework.BundleException: Exception in com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start() of bundle com.adobe.flexbuilder.codemodel.
        at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:806)
        at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:7 55)
        at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:352)
        at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:280)
        at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:408)
        at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
        ... 62 more
    Caused by: java.nio.channels.OverlappingFileLockException
        at sun.nio.ch.FileChannelImpl$SharedFileLockTable.checkList(Unknown Source)
        at sun.nio.ch.FileChannelImpl$SharedFileLockTable.add(Unknown Source)
        at sun.nio.ch.FileChannelImpl.tryLock(Unknown Source)
        at java.nio.channels.FileChannel.tryLock(Unknown Source)
        at org.apache.lucene.store.NativeFSLock.obtain(NativeFSLockFactory.java:246)
        at org.apache.lucene.store.NativeFSLockFactory.acquireTestLock(NativeFSLockFactory.java:79)
        at org.apache.lucene.store.NativeFSLockFactory.setLockDir(NativeFSLockFactory.java:139)
        at org.apache.lucene.store.NativeFSLockFactory.<init>(NativeFSLockFactory.java:117)
        at com.adobe.flexbuilder.codemodel.internal.common.AbstractTextDatabase.start(AbstractTextDa tabase.java:111)
        at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:43)
        at com.adobe.flexbuilder.codemodel.internal.search.ASProviderFactory.createDataProvider(ASPr oviderFactory.java:47)
        at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.addISearchDataProvider dFactory(SearchIndexManager.java:70)
        at com.adobe.flexbuilder.codemodel.internal.CMCoreActivator.activate(CMCoreActivator.java:19 9)
        at com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start(CMBridge.java:77)
        at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:7 83)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:774)
        ... 67 more

    I'm having this issue since ever with FB 4.7 (the normal IDE version, not the command-line one).
    The most consistent way I found to resolve it is to delete the output folders of all flex projects, then restart and perform a clean build.
    My suspect is that the incremental compilation is flawed, but cannot be sure of it.
    P.S. usually the initial error has this root exception
    Root exception:
    java.lang.NullPointerException
      at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getStateLocation(W orkspaceSpecification.java:157)
      at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getFileInStateLoca tion(WorkspaceSpecification.java:149)
      at com.adobe.flexbuilder.codemodel.internal.search.AbstractTextDatabase.start(AbstractTextDa tabase.java:81)
      at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:25)
      at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.initialize(SearchIndex Manager.java:155)
      at com.adobe.flexbuilder.codemodel.CMCoreActivator.activate(CMCoreActivator.java:189)
      at com.adobe.flexbuilder.codemodel.CMCoreActivator.start(CMCoreActivator.java:76)

Maybe you are looking for