Downloading Youtube clips off of net into .mov files-is this possible?

Hello, is there a way to download a youtube clip off of the internet and get it into a .dv or .mov file? I would like to get it into a quick time file and onto a CD. I will post this in the other forums, but if anybody has a solution, I appreciate it. Thanks.

Yes it is very easy.
First, download Perian
http://perian.org/
no Quicktime user should be without it, but I don't know whether you need it for this exercise, as I already had it when I started using Youtube.
In the Window menu of Safari, choose Activity.
You will see all elements of the page-
Double-click the element which is of the flash movie file (this is usually the largest one if loaded, or the one which is still loading if movie is still loading)
The flash movie will download, but you need to add .flv file extention on the end of the filename.
It will then work with Quicktime, just like any other movie.

Similar Messages

  • How can I download an audiobook so it goes into audiobook file and not music

    how can I download an audiobook so it goes into audiobook file and not into music ? thanks

    Select all tracks that you want to listen to as Audiobook. Right click. Get Info. Click yes. Options tab. Media Kind change to audio book. OK  Done.
    T

  • How do I adjust the page orientation in Pages?  I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
    If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result.

  • I am creating a request for proposal form and I need to add a commission structure field.  I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

      I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

    It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
    Andrew

  • I am making an album with Snapfish and would like to download ome of my photos from iphoto to snapfish, is this possible?

    I am making an album with Snapfish and would like to download some of my photos from iphoto to Snapfish, is this possible?

    You mean "upload"?
    There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

  • How to download YouTube clips?

    I used to be able to download clips from YouTube by clicking on large files (over 5mb).  Large files are no longer available and therefore downloading clips is no longer possible.  Does anyone know of an alternative method?

    Mac Tubes should've worked.
    You launch Mac tubes and a viewer list pops up
    In Mac Tubes search box type the name of the videos you're trying to view.
    Look for your video in the list.
    Click on the video.
    It should play.
    While it's playing there is a gear icon at the lower left bottom of the player screen, a drop down menu appears and Download is the last option that will allow to download YouTube video in the formats that are available.
    The available formats are MP4, 720p HD or 1080p HD.
    Try each one to see which formats resolutions can be downloaded.
    Sometimes not all video resolutions are available for download.
    I use this app all of the time for many years in order to download YouTube video.
    I have tons of clips and video in iTunes and on my iOS devices.
    This should work for you.
    Make sure you've downloaded the latest version that works with your version of OS X.

  • Getting old site off the 'net without appropriate files. (to start over with same domain name)

    As a complete novice, I'm not even sure how to start this question...but, I have tried everything and I think I have "lost" my website in terms of bringing in back into DW and changing/updating it.  My backup files on my computer have disappeared and the appropriate files through my cPanel to bring it back to in order make changes aren't there.  The website still functions, but it is outdated for my business needs.
    So, at this point, my question is this; how can I gain control over the domain and start over from scratch.  I don't want what is out there anymore, but without control through the above mentioned devices, is it even possible to build a new website and get the old one off the 'net as it is and still keep the original www.name.com?
    I'm clueless at this point.  Thanks.

    Chazmonk wrote:
    So, at this point, I don't know what is really going on.  My main goal was to get my existing website off the net and put something updated on with the same domain name.  I was successful with what JTANNA suggested, but I don't know what I'm doing with a mirrored site in terms of what my needs are.  I am not against changing the domain name and just leaving this one out there, though I did put a great deal of time into building it.  I would take some further help if anyone has more suggestions, but I'm about ready to move one.
    Thanks for trying to help.
    You will need to sort out the FTP issues because when you have edited your site, you will need to upload it and so FTP details will be required.
    Your first port-of-call to sort this out is to contact your host who can reset the password for you so that you can start all over again.  The alternative, is to give your password/login details to Murray (PRIVATELY) so that he can try from his machine.  When this is done, you can always change the password for your own security.
    hth

  • Why no more clips and just one big .mov file?

    I had been working in iMovie and iDVD 4 for some time up until present when I upgraded to iLife 6. One of the things I like about ver. 4 was that the whole movie was saved as a file but there were also the individual clips saved as well. I could use these clips when creating my iDVD project. Now I see that those clips are gone and there's just one big .mov file to drop into my iDVD themes. Why did they do this??? Is there some benefit to this that I'm not understanding? Maybe I don't have something set correctly in the prefs.? Is there anyway around this so that I have control over what part of a movie gets dropped into my iDVD themes?
    -Daryl

    Thank you so much, Matt. That did the trick. I would've never thought of that. I was beginning to figure that the clips just had to be somewhere else that wasn't obvious to me. I couldn't believe that they would do away with that. Thanks again!
    -Daryl

  • I made screen recordings through quicktime on mac and 6 of my 13 video did not turn into .mov files. How do I get them onto iMovie?

    i need to put my put my quick time videos (screen recordings) onto iMovie and for some reason its not letting me. they are not even .mov files. whta do i do? i need it for tomorrow!

    Yes, exactly (in fact I had that page on the Help Viewer open while I did it just in case I had skipped a step). Plus some other ways (like converting the clips to other formats, etc)
    But I have made the video by using QuickTime Pro, by stitching the clips together. It isn't anything like I want but I can move on now and contemplate other ways to make this work (unless you or somebody else comes up with something!).
    Thank you again.

  • How to convert .dv file into .mov file

    How can I convert a .dv file into a .mov file?
    When I export an iMovie project in "full" quality, it creates a .dv file (I don't even know what that is, really). I've found that websites (like facebook, for example) won't accept it, and that .mov is more common and acceptable. But I don't see a "full quality" .mov option in iMovie.
    If possible, I'd really like to take my existing .dv files and convert them rather than having to re-export the original iMovie projects.

    Hi jayriggity - .dv is video format, whereas .mov is simply a container in which any one of a number of video formats can be stored. Try 'sharing' your movie to the Web (Share>Quicktime> compress movie for Web). This will create a smaller version of your movie which Facebook should accept.

  • I am looking for help.I wish to download Mozilla Thunderbird to my I phone 5s. Is this possible?

    I wish to use Mozilla Thunderbird on my I phone.
    Is this possible?

    No.  The only place to download apps/programs for an iOS device is the App Store.  Search there for alternative browsers.  Chrome and iCabMobile are two popular ones.

  • I want to be able to download pictures from my camera and caption them.  Is this possible with any known app for iPad2?

    I want to be able to download pictures from my camera and caption them on my iPad2.  Is this possible?  Having trouble finding an app for that...

    I believe the iPhoto App can add captions to photos.

  • Putting movie clips in AS3 package into movie clip on stage

    Hi - I am a as2/flash animator and am working on an AS3
    project. The AS is in a separate file, inside a package. I am
    modifying existing code.
    The script adds movie clips in a function via addchild.
    What I am hoping to do, is have the movieclips added to a
    clip that already exists on the stage.
    I put a clip on the stage named holder, with the instance
    name holder_mc - and I tried to add the clip with
    holder_mc.addchild in the AS3 file - it seemed to work, but
    manipulating the holder_mc - it looks like the added clips are not
    affected?
    Any help is appreciated.

    Child_array is a property of the Parent class.
    It's only added to in one point, in a function that creates a
    Child and adds it to the array.
    I think I might have found out the problem with my code after
    adding a trace to the function, think I'm creating twice the number
    of clips I'm removing, and the deletion part of my code is fine!
    Turns out AS3 is maybe not so bad after all :P
    Thanks alot for taking the time to reply though kglad!

  • Why can't I save an image off the net into the folder of my choice?

    I've used a PC all my life until two days ago when I bought my MacBook. I absolutely love it, but there are a few PC/Mac differences bugging me, and one of them is what I'm asking you all about:
    When I save an image off the internet and the pop-up asks me where to save it, it suggests only a few folders for me and I can't choose the folder I actually want to save the image in. Is there any way to change this? No one else seems to have asked about this on here before, but I hope someone can help me out.

    Ah, it's so simple! Thank you.

  • Error while downloading ALV grid o/p list  into local file

    Hello friends,
       I have developed an ALV report and desplaying it using
    'REUSE_ALV_GRID_DISPLAY, function module .While downloading the output list into excel format I am geeting an error "The current statement only supports character-type data objects.
    Error Analysis-
    In statement
       "STRLEN( obj )..."
    the argument "obj" can only take a character-type data object.
    In this case, the operand "obj" has the non-character type "P".
      I have set the import parameter i_save values as 'A'
    But still not able to download and facing the same error.
    Please help me out ....
    Thanking you....
    Regards,
    Rajesh Akarte
    Message was edited by:
            Rajesh Akarte

    Hi,
      following is the dump code..Is there any problem due to date and currency fields..?
    Error in ABAP application program.
    The current ABAP program "SAPLKKBL " had to be terminated because one of the
    statements could not be executed.
    038350       endif.
    038360       gs_out-hlplen = strlen( gs_out-hlpchar ).
    038370     elseif gs_fc-tech_form = 11.                              "INS TECH
    038380   *   Min. Ausgabelänge für ein Datum ist immer 8
    038390       if gs_fc-datatype = 'DATS'.                             "INS TECH
    038400         gs_out-hlplen = 8.                                    "INS TECH
    038410   *    Min. Ausgabelänge für eine Uhrzeit ist immer 6
    038420       elseif gs_fc-datatype = 'TIMS'.                         "INS TECH
    038430         gs_out-hlplen = 6.                                    "INS TECH
    038440       endif.                                                  "INS TECH
    038450     elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
    038460   *   Überführung int. in ext. Format via Konvertierungsexit
    038470       if not gs_fc-convexit is initial or                     "INS TECH
    038480          not gs_fc-inttype ca 'CN'.
    038490   *   elseif not gs_fc-convexit is initial.            "DEL TECH11
    038500         write Y9CK034230

Maybe you are looking for