Downloads of updates not saving, no prompts or icons in the Application folder-how do I ensure updates are saved?
I am following the instructions to download v 6 but receive no prompt to move the Firefox icon to the applications folder. I have done that anyway, but it's not saving-the latest version is July 11. I then get reminders to update all the time-what am I doing wrong?
I am working on a Mac laptop
A lot of people panic when they see Photoshop displaying differently from other software. But that's normal and expected. Here's what happens:
1. Photoshop is color managed and performs a document profile > monitor profile conversion when it displays. So whatever the document profile is, Photoshop will display correctly - unless you have CM policies set to "off" (...!)
2. Other applications, including many web browsers, aren't color managed and will just send the file numbers directly to the display. This distinction is extremely important, because there will be a slight difference. Again, that's normal. Photoshop is right and the other apps are wrong.
3. Without color management, it all hangs on how your monitor displays color. Most monitors are so close to sRGB that any sRGB file will display roughly correctly. This is why sRGB is the de facto web standard: it can live without color management. And that's why you should always convert web material to sRGB. Yes, that's the Edit > Convert to Profile option. You can also use Save For Web to do this if you check the appropriate boxes.
Similar Messages
-
The new Foxfire version was downloaded into my download folder but I was never prompted, as it said I would be , so move the Foxfire icon into the applications folder. Therefore I do not know where the process stands. It old icon in my dock upgraded or has nothing happeded. It seems as if the process somehow just stopped in the middle.
Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I've had an 'urgent' message telling me to upgrade Firefox to 3.6.6 in order to prevent online attacks but when I try to drag the newly downloaded icon into the applications folder a message comes up saying I do not have sufficient priviledges. Can you explain why and what I have to do?
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I've been asked to update my Firefox two days in a row, and have downloaded the update, but no ICON appears for me to drag into the applications folder. Why is this?
Make sure that Firefox gets installed properly.<br />
Open the DMG file and drag the Firefox program to the application folder on your hard drive.<br />
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
* https://support.mozilla.com/kb/Installing+Firefox+on+Mac
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X -
same as above, but at the end of the download it goes "boink" and closes
Hello ndorrien, you cannot complete the installation because [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc#os=mac&browser=fx16 Firefox no longer works with Mac OS X 10.4 or PowerPC processors]
if you want you can try : [http://www.floodgap.com/software/tenfourfox/ tenfourfox]
see also for tenfourfox : [http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported TenFourFox no longer supports browser plugins]
thank you -
I can close the little blue 'drag' box every time I open Firefox, but that is a hassle, and I know it should not be necessary. When I try to eject the 'peripheral' icon, it says I cannot because Firefox is in use. I have to wait until I close Firefox to be able to eject it off the desktop.
Mac OS X 3.4 GHz, Intel i7Hi dgbakker-
When you open Firefox and go to the Firefox > About menu, does it say that Firefox is up to date? I've seen at least one other person with this issue, and any more detail would be helpful. -
I'm trying to download the latest firefox version as I was having problems with a certain website. I seem to be stuck half -way through the download.
I would try downloading it again. You can get it from here:
* http://www.mozilla.org/en-US/firefox/all-older.html -
I have a Macbook 2008, Mac OS X, version 10.5.8, processor 2 Ghz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3.
I downloaded Firefox 4.0 as prompted two times on different days and the same thing occurred.Firefox 3.6.16 has a newer build and release date than Firefox 4.0 does.
-
I don't know what else to tell you.
I downloaded firefox again, deleted the earlier version, and now firefox is working properly.
-
Anyone can help? Thanks!
Move it into a folder or a page you don't use.
You could likely edit the database if you understand SQL, but I dont' know if it gets rebuilt periodically.
But, there is no UI to hide/remove items from Launchpad. -
I have tried multiple times to update the firefox7.0. It appears to download fine but I never get a prompt to move it to the applications folder. Now Firefox will not open at all (it was functioning sporatically over the past several months). How to fix?
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm. -
Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.
stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work. -
I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.
Mavericks downloads into the Applications folder, where you can install it. Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer. Failing that, try contacting Apple Support.
-
Get this error when trying to install Logic patch 9.1.4 to my machine.
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.Thx, but i had already read that and tried it: did not work.
Got it fixed now by reinstalling Logic Studio 9 from DVD.
That indeed creates the Logic Pro folder in Applications - something I had tried earlier by simply moving my existing Logic folder. This means the Logic 9.1.5 update does not simply check a folder name: there must be another entry/registry entry it checks. Reinstalling Logic Studio from scratch solved it for me.
After reinstalling thought Lion forgot my Focusrite Saffire 40, so no DAW. Solved that by reading a forum entry on beta drivers.
So I am happy, music creation wise.
Left for me is to solve the X Mail application saying it does not run under Lion!
Model Name: Mac mini
Model Identifier: Macmini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Maybe you are looking for
-
Can't get music into new ipod!
Hey - So I recently just purchased a brand new ipod touch and had to create a new apple ID because I was not able to access my old one (The email that it was registered under was deleted a while ago so I'm not sure if that was the reason why I couldn
-
hi, I have two application and persist my objects with hibernate. In my first app I persist member objects(forename,surname, age) and in my second app i persist publication objects(name of publisher, title, year of publication). My question is: how c
-
Background jobs pointing to old client after client copy
Hello We have recently completed system refresh from PROD system to TEST system. We have created new client in new TEST system. Background jobs are copied properly from old client to new client. But all these jobs are pointing to old client only. We
-
This stinks. My Zen Micro tries to rebuild library.. then..it says firmware probl
it's been doing this for ages.. any suggestions? It won't even load past that. Ever.
-
Subtract a numerical value from a database's data
Hi Everyone! I'm just wondering what kind of code/s should i use if i want to subtract the value of a numeric data from a database. Example: Column is Savings. Current Data: $ 25,000(Ignore the sign) , I want to make it 20,000. Does anyone know how i