Downmix and a.pack (Ac3)

Hi, I'm using a.pack 1.5.4 to encode audio files in ac3. The I create a DVD with DVD studio Pro.
Everything is Ok, except downmixes which are far less loud and dynamic than the 5.1 result.
It's my ampli which decode, but this problem does not exist whith commercial DVDs.
Is the A.pack not so good, (i've tried many setttings), or???
Thank you for your answers !

Hi:
Check the settings you'll find in this * Encoding AC3 with A.Pack Tutorial *.
Hope that helps !
Alberto

Similar Messages

A Pack AC3 settings

A Pack > AC3 settings?
I want apack to do - nothing - simply convert to AC3. No compression etc.
I want the audio to remain just like the aiff was in terms of sound charactor and dynamics.
Any tips?
G5 2.7 DVDSP 4 Mac OS X (10.4.2)

Hi:
In my experience I feel that such settings keep my audio like the original. Start with that settings and make a test.
Treat your audio in any software (i.e. Soundtrack) to get your right mix, including all compression and effects you want, but remember you must have a good audio monitor system because you can get foul by the speakers !
My final desicion about audio is allways playing the DVD in my home player with my standard audio equipment (a Yamaha) where I know that everything (comercial CDs and blockbuster titles) "sound" fine.
I'm telli all of these without any information about where are you mixing your audio then please forgive if something is obvious or "not too much pro" for you.
Hope that helps!
Alberto

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDK

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

How to find out the versions of family pack and mini pack installed?

There are family pack and mini pack for HRMS.
How to find out the versions of family pack and mini pack installed
just by a Unix command or sqlplus Select statement?
Thanks

you can get the Minipack version of the products by querying fnd_product_installations or ad_patchdriver_minipks, for family packs you need to query through Metalink, OR if you have u driver file which resides on $AY_TOP/discoverer, looks for the minipacks/familypack version in the driver file.

List all servers with OS and service pack

Is there an easy way using any script or software to list all servers joined to your domain including operating system (i.e. server 2008) and service pack level, without having to check each manually?

Hi Cf090,
The limit is used to Specify the number of objects to return that matches the criteria that you specify. If you specify a value of
0 for <NumberOfObjects>, this parameter returns all matching objects. If you do not specify this parameter,
dsquery displays the first 100 results by default.
For more detailed information to use dsquery, please refer to this article:
http://technet.microsoft.com/en-us/library/cc754232.aspx
If you have any other questions, please feel free to let me know.
Best Regards,
Anna

Need list of Crystal Reports Version Numbers by Product and Service Pack

Hi All,
Where can I get a list of Crystal Reports Version Numbers by Product and Service Pack? I'm trying to figure out which version we have is the most current version, because we have so many version installed threw out our company.
Thanks.

Hi Matt,
Please check the crystal Report 2008 product versions
Cr 2008+SP0 - 12.0.0.683
Cr 2008+SP0 + FP1 - 12.0.0.796
Cr 2008+SP0 + FP2 - 12.0.0.840
Cr 2008+SP0 + FP3 - 12.0.3.900
Cr 2008 + SP1 - 12.1.0.882
Cr 2008 + SP1 + FP1.1 - 12.1.1.957
Cr 2008 + SP1 + FP1.2 - 12.1.2.996
Cr 2008 + SP1 + FP1.3 - 12.1.3.1028
Cr 2008 + SP1 + FP1.4 - 12.1.4.1068
Cr 2008 + SP1 + FP1.5 - 12.1.5.1096
Cr 2008 + SP1 + FP1.6 - 12.1.6.1116
Cr 2008 + SP1 + FP1.7 - 12.1.7.1144
Cr 2008 + SP1 + FP1.8 - 12.1.8.1176
Cr 2008 + SP1 + FP1.9 - 12.1.9.1290
Cr 2008 + SP1 + FP1.10 - 12.1.10.1390
Cr 2008 + SP1 + FP1.11 - 12.1.11.1454
Cr 2008 + SP2 - 12.2.0.290
Cr 2008 + SP2 + FP2.1 - 12.2.1.412
Cr 2008 + SP2 + FP2.2 - 12.2.2.453
Cr 2008 + SP2 + FP2.3 - 12.2.3.467
Cr 2008 + SP2 + FP2.4 - 12.2.4.507
Cr 2008 + SP2 + FP2.5 - 12.2.5.537
Cr 2008 + SP2 + FP2.6 - 12.2.6.567
Cr 2008 + SP2 + FP2.7 - 12.2.7.598
Cr 2008 + SP2 + FP2.8 - 12.2.8.638
Cr 2008 + SP2 + FP2.9 - 12.2.9.698
Cr 2008 + SP2 + FP2.10 - 12.2.10.810
Cr 2008 + SP3 - 12.3.0.601
Cr 2008 + SP3 + FP3.1 - 12.3.1.684
Cr 2008 + SP3 + FP3.2 - 12.3.2.753
Cr 2008 + SP3 + FP3.3 - 12.3.3.812
Thanks,
Naga.

Crystal Reports XI Release 2 and Service Pack 2 upgradation

Hi,
I need your support to upgrade and migrate to Crystal Reports XI Release 2 and Service Pack 2 in my development server.
I am currently upgrading my Crystal enterprise version 9 with the Crystal Reports XI Release 2 and Service Pack 2. I have the below questions to be clarified. Appreciate if you can reply me ASAP. Thanks.
My Environment:
O/S - Windows Server 2003 Standard Edition; Version 5.2 (Build 3790); Service Pack - 1
RAM size - 1 GB
Installed software - Crystal enterprise 9
1) After successfully upgraded with the XI version, all my current user accounts and existing reports are not available in the upgraded version. Pl. suggest me, how to migrate my existing connections and all the existing reports?
2) In my server, SQL Server is not installed. But SQL Server instance (SQL Server 7.00.623) is running in my taskbar (desktop). If I stopped the SQL Server instance, the "Crystal APS" in the Crystal Configuration Manager is stopped. What information is stored in the SQL Server?
3) What is the default SQL server version bundled with Crystal Reports XI Release 2 Service Pack 2? What is the SQL server version you recommand?
4) Will the Crystal Reports XI Release 2 SP2 supports the SQL Server 7.00.623?
Regards
Sanrajesh

Hello, Sanrajesh,
You have been using Crystal Enterprise 9.0 and now you are installing Crystal Reports XI R2. Is that correct?
Crystal Reports XI R2 is just the Crystal Reports designer and runtime for development.
Crystal Reports XI R2 does not have the functionality of Crystal Enterprise. The upgrade would be Crystal Enterprise 9.0 to Business Objects Enterprise XI R2. (11.5)
A full BusinessObjects Enterprise installation will install the appropriate MS SQL Server for it's own use.
Will this be the Enterprise server or just the Development system to create an application connecting to your BusinessObjects Enterprise server?
What development language will you be programming in?
If you have BusinessObjects Enterprise installed elsewhere you only need the appropriate development components on your system and connect to the server in code.
Our BusinessEnterprise Support team would assist you in the upgrade from Crystal Enterprise 9 to Business Objects Enterprise XI R2 if that was your plan.
Then we could discuss the development requirements.
Elaine

How to install 10g diagnostic and tuning pack

Hi,
am new to 10g. in 9i there was a seperate CDs for diagnostic and tuning packs. But in 10g we didn't got any CD for this. So is it installed by default with 10g?. if yes is there any configuration required for using these packs. If it is not installed by default where i can get this?.
Thanks in advance
M.SUdhakar

Hi
These are not separate anymore.
In Grid Control go to Setup -> Management Pack Access to set them up.
Also see Chapter 2 in http://download-west.oracle.com/docs/cd/B14117_01/license.101/b13552/toc.htm
Unfortunately, Oracle don't appear to have migrated all of the functionality of Diagnostics Pack and Tuning Pack to Grid Control, especially for databases < 10g. eg. the very useful Response Time Per Transaction metric is only available for 10g databases. Also, the graph viewing functionality looks poor.

Oracle Standard Diagnostic and Tuning Pack

Can you purchase a license for Oracle Diagnostic and Tuning Pack to be used in an already licensed Oracle Standard database? If so, can you add it as a named user license for one or two people, or does the license have to match the database license (which is presently a processor license)?
It seems to me that to license the Diagnostic and Tuning Pack you need to be upgrade to Oracle Enterprise Edition. Is this correct?

According to the Licensing Guide/Information these packs are not available (see Manageability section):
- in Oracle 10.2 Standard Edition http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJFHED
- in Oracle 11.1 Standard Edition http://download.oracle.com/docs/cd/B28359_01/license.111/b28287/editions.htm#CIHBAEID
- in Oracle 11.2 Standard Edition http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CJACGHEB

2008 Engage Server Service packs and Fix Packs

I have Engage Server. I tried to load SP 3 and it didn't let me open old files. SAP told me SP3 was not compatible with Server product. I had to roll back to base version 5.0.0.99 build 12,0,0,121. Does anybody know if I can at least load SP1 or SP2 (and/or Fix packs) so I can have some of the basic features?

Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues.

How can I confirm that I installed BO XI R2 SP3 and Fix Pack 3.5 correctly?

I installed both SP3 (Client Install) and Fix Pack 3.5 (Client Install) on my workstation. The Installation guide says it should appear in Add/Remove Programs, but I'm not seeing either entry. A log file was created for each install, is there anything within the logs that may say that the install was successful?

Under the Add/Remove programs section in the Control Panel. Select the Business Objects Application and there is a link that reads "Click here for support information"
The opened display box will display a Version such as 11.5.xxxxxx
Reply back w/ the version. SP# and 3.5 fix pack will be something like 11.5.9.1176

Installing audio and jam pack content

I'm running logic pro 9 on a mackbook pro and want to save sessions and store audio and jam pack content on a 7200rpm firewire 800 external hard drive. I installed the audio content on the external drive successfully but the installation software won't allow me to install the jam pack content on the external drive; it wants me to install it on the system drive which I had hoped to avoid.
Is there a way to perform the installation on the external drive?
I also installed logic on a mac pro, and on this install, the software won't allow me to install audio content or jam pack on a drive different than the system drive.
Any ideas on how to resolve these two issues?

hi joearturo
I've got the JPs on an ext hdd. It's been a while but as I recall I installed onto the system drive, then dragged the jam pack folder, say orchestra, into my plugins samples folder on the ext drive and deleted the folder on the sys drive.
When logic opened next it gave a message saying something like "can't find folder" choose location. A drop down box appeared with all the drives and I selected the ext and the appropriate folder. Everything was okay from then on.
Hope this helps, although its somewhat convoluted.
Scorpi.

Min Order Qty(MOQ) , and Std Packing Qty (SPQ)

Hi
I have requirement In In MRP, That is MOQ, and SPQ, Min order qty we can Specify in MRP1, but the problem is Std Packing qty(SPQ),
Scenario, : My client MIN order qty is 5000 pcs , and std packing qty is 500.
If the Req Cross
More than 5000 and Less than 5500 , Plo/Pur Req should create for 5500,
More than 5500 and Less than 6000 , Plo/Pur Req should create for 6000,
etc
Thanks in advacne
Madhu

Hi daval
As you told i have specified , MIn ord qty asn Std packing qty but the out come is quit diff Please expalin y system giving ouput like this,
Eg:1) IF i Give MOQ: 100 and Rounding value 5
             My re Dep qty is 80 it is creating Pur Req for 100
     2) IF i Give MOQ: 100 and Rounding value 15
             My re qty is 80 it is creating Pur Req for 100
     3) IF i Give MOQ: 100 and Rounding value 18
             My re qty is 80 it is creating Pur Req for 100
     4) IF i Give MOQ: 100 and Rounding value 25
             My re qty is 80 it is creating Pur Req for 100
      5) IF i Give MOQ: 100 and Rounding value 29
         My re qty is 80 it is creating Pur Req for 100
      6) IF i Give MOQ: 100 and Rounding value 35
         My re qty is 80 it is creating Pur Req for 105
      7) IF i Give MOQ: 100 and Rounding value 40
         My re qty is 80 it is creating Pur Req for 100
      8) IF i Give MOQ: 100 and Rounding value 45
         My re qty is 80 it is creating Pur Req for 100
      9) IF i Give MOQ: 100 and Rounding value 52
         My re qty is 80 it is creating Pur Req for 102
    10) IF i Give MOQ: 100 and Rounding value 60
         My re qty is 80 it is creating Pur Req for 120
     11) IF i Give MOQ: 100 and Rounding value 67
         My re qty is 80 it is creating Pur Req for 134
     12) IF i Give MOQ: 100 and Rounding value 74
         My re qty is 80 it is creating Pur Req for 148
     13) IF i Give MOQ: 100 and Rounding value 75
         My re qty is 80 it is creating Pur Req for   150
14) IF i Give MOQ: 100 and Rounding value 78
         My re qty is 80 it is creating Pur Req for   156
15) IF i Give MOQ: 100 and Rounding value 80
         My re qty is 80 it is creating Pur Req for   100
16) IF i Give MOQ: 100 and Rounding value 85
         My re qty is 80 it is creating Pur Req for   100
Can u please expalin how the rounding value is Caluclating in the above senario, It is not Meeting our requirement
MY req Is
eg : MIN order qty is100, ans std packing qty is 55, Dep Req is 80, it should Plan for create Min Order qty 100
       MIN order qty is100, ans std packing qty is 55, Dep Req is 110 , it should Plan for 155 qTY
       MIN order qty is 75 , ans std packing qty is 10, Dep Req is 40 , it should Plan for create Min Order qty 75
       MIN order qty is 75 , ans std packing qty is 10 , Dep Req is 76 , it should Plan for qty 85
      MIN order qty is 500 , ans std packing qty is 250, Dep Req is 498 , it should Plan for create Min Order qty 500
        MIN order qty is500 , ans std packing qty is 250 , Dep Req is 502 , it should Plan for 750
First it should check Min order qty , if dep req is less than Min order qty it should create req for For Min order qty ,
if the req is more than Min order qty then it should create Req By considering min order qty+Std Packing qty.
Thnaks and In advance ,
Reg
Madhu
Edited by: MADHU SUDHANA on Sep 25, 2009 10:04 AM
Edited by: MADHU SUDHANA on Sep 25, 2009 10:34 AM

Downmix and a.pack (Ac3)

Similar Messages

Maybe you are looking for