Doyou know if Ipad can be used with a bluethoot earphone?

Do you know if Ipad can be used with a Bluethoot earphone?

Only if it supports A2DP protocol.  Many Bluetooth headsets for phone calls only do not, but some will.

Similar Messages

  • How many iPads can I use with a licensed app?

    How many iPads can I use with a licensed app?

    If you're asking for a school, as I'm guessing from your aliast, here are the official terms of licensing for the App Store:
    If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
    So in summary, you can use an app on any iPad you use yourself. If you want to use the app on multiple iPads used by different users, you need a license for each iPad. Check out the Volume Purchase Program:
    http://www.apple.com/education/volume-purchase-program/
    Regards.

  • I am planning to buy ipad 2 wifi   3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

    I am planning to buy ipad 2 wifi   3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

    I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
    As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
    Given iPad 2's are no longer being sold, I doubt any  that could be bought would have a warranty still. Or have at most very little of it left.
    Why an iPad 2?  its now 3 generations behind the current one.
    Perhaps an iPad 4 would be a better choice.

  • Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.

    Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.

    The iPad charger is dual voltage. You need only a plug adapter to be able to plug your US charger into a European wall outlet. A basic one costs about $2.00. - $6.00. Like this...
    http://www.amazon.com/CVID-Grounded-European-Adapter-Adaptor/dp/B0098B5GN8/

  • I want to find my ipad but don't know how. Can I use the Cloud to do this?

    I want to find my ipad but don't know how.  Can I use the Cloud to do this?

    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • What does this message mean?  "ITunes has fetected an iPad in recovery mode.  You must restore this iPad before it can be used with ITunes".

    What does this message mean?  "itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with ITnes."  How do I restore when every time I connect to my computer I get this message?

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."

    Went on a Vegas trip on Sept
    11th.  My iPad worked fine
    before getting on the plane. In the hotel about 48hrs later I opened my iPad it
    read the message: “iPad is disabled,
    connect to iTunes.”
    To my knowledge myself, nor anyone else has tried to access my device or
    entered the password incorrectly 3 or more times.
    I started by updating my iTunes account on my computer to the latest version.
    Then multiple times I attempted
    the “Use recovery mode”
    steps.
    e.g.
    1. Turn off your device and leave it off.
    2. Plug in your device's USB cable to a computer with iTunes.
    3. Hold down the Home button on your device as you connect the USB
    cable. Keep holding down the Home button until you see the Connect to iTunes
    screen.
    I received the message on my computer saying “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”
    I click the “Restore iPad” button.
    During which time the progress bar on my computer’s iTunes
    screen was moving very slowly and other times seemed like it wasn’t moving at
    all. I would leave my two devices and attached by the cable and upon returning
    I would find that the process would have ended before it had completed.
    Initially I thought it was a connections issue because I was in remote
    locations with slow internet servers. Since being home I have re-attempted the
    process and have been able to fully complete the forced recovery but I will
    receive a message saying:
    “The iPad could not be restored. The disk you are attempting to use is full.
    Removing files and emptying the recycle bin will free up additional space.”
    What recycle bin is the message referring to? Obviously I CANNOT access any
    data on the iPad itself. Just for the **** of it, I did empty my computers
    recycle bin and re-attempted the forced recovery process but as I suspected it
    did nothing for the iPad and I still received the same message: “The iPad
    could not be restored. The disk you are attempting to …”
    Please help

    Here's a couple of Apple Support articles ...
    Resolve iOS update and restore errors
    If you can't update or restore your iPhone, iPad, or iPod touch

  • I tried to launch iCloud on iMac.  I Changed my e-mail address recently, and iMac  doesn't  seem to know it.  Even worse, it doesn't know any password I've used with Apple ID.  Can anyone help me?

    I tried to launch iCloud on iMac.  I Changed my e-mail address recently, and iMac  doesn't  seem to know it.  Even worse, it doesn't know any password I've used with Apple ID.  Can anyone help me?

    No, i don't. if i did i would have tried it. do you have to sign up an appled ID for iCloud? If the answer is yes then they should mention that in the set-up instructions.

  • I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    Good work, thanks for the report.

  • Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

    my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

    Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • HT201412 I try to update IOS 6 to my ipad 2 and after half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can every

    I try to update IOS 6 to my ipad 2/ wf/3g  and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!

    Click restore in itunes.

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • I have two phones under the same apple ID and I want to put them on two separate apple IDs. how do I do this?

    I have two phones under the same apple ID and I want to put them on separate apple IDs, how do I do this??

  • Sudo: sorry, you must have a tty to run sudo

    Hi Guys, When I install the 12C management agent using upgrade console one step " RunRootScript" failed with below error. sudo: sorry, you must have a tty to run sudo But the status of job "PreDeployAgentSW" is successul. Can someone tell me how to f

  • R3 & XI in the same installation

    Hi Experts, we are a small client and we are implementing  SAP ECC 6.0, and we have to create several small interfaces with other database access in our enterprise. it is possible to activate in our SAP ECC 6.0 the netweaver PI in the same installati

  • Nested statement "for all entries in"

    Hi, is ist possiple to nest "for all entries in" statements ? At the moment I have the following SELECT-Statement: select * from /rtc/tm_inusk           appending table gt_zrtc4inusk           for all entries in lt_trkorrdesti             where trkor

  • 2 networked Macs.. cant see 1 in Finder sidebar

    I have an iMac & Mini on the same wireless home network, both with 10.5.2. I can not get the the Mini to show under "servers" on the iMac's Finder, yet the iMac does show on the Mini's Finder. -Both have File sharing enabled & are sharing the whole h