Dozens of drivers will not load on brand new HP ENVY 14t-1000 CTO Notebook PC. Win 7 Ultimate N

I recenty paid for a brand new  HP ENVY 14t-1000 CTO Notebook PC.It had entirely too much bloatware and I have doe fresh install's hundreds of times. The installs went fine but only 4 drivers from the driver page for this product on Win 7 will install. I am without the Wifi, Ethernet, Sound, Display, Smart Card Reader, and about 10 more that I am not sure what they are. I googled the PCI ID's of some and found what should be the driver as in the Wifi is the Broadcom driver from the support page for this product but after the install nothing happens. Then you get the pop up that says there was the program may not have installed correctly. If I point the device directly at the directory for any of these it says driver not found. I have never had such a time installing drivers for a supported OS. It came with Win 7 on it. I am just trying to perform a clean install. I will gladly provide the device ID's for anyone at HP that can give me a driver that will work. The ones on the appropriate page do not. I know I am missing the IDT sound driver, The realtek ethernet driver, I believe the ATI HD Video driver, and the Broadcom Wireless driver for starters but once again all version new and legacy on the drivers page DO NOT install.  Help. I am this close to calling HP and returning this thing. I only received it today and would have no qualms about sending it back.     

Hi: This is a peer to peer forum.  No one on this forum is authorized to respond on behalf of HP to any posts made here. I looked at the support and driver page for the 14t-1000, and that model is 5 years old according to the release dates of drivers listed there. Ar you sure that is the model number? Can you please post the product number for the PC?  The product number can be found on the same sticker as the serial number. You can also post the top line of each hardware ID's for each device needing drivers. I'll see what I can find. The driver directly from Realtek should install the card reader (PCI Device).  You want the first driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

Similar Messages

  • Problems loading generic Windows sound driver/Envy 14t-1000

    Info: HP Envy 14t-1000 CTO, Windows 7 (updated to latest SP).
    So, I recently tried updating my video drivers and unfortunately it messed with my audio settings (normally I'd do a system restore, but for whatever reason I forgot to create a restore point before updating...). At this point, I suspect that I accidentally re-installed the IDT High Definition Audio Codec, which leads me to my issue - I've been trying to uninstall Beats audio (and the IDT codec)  and use the generic audio driver that comes with Windows, and have followed the instructions listed here:
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/REMOVE-BEATS-AUDIO-LOAD-GENERIC-SOUND-DRIVE...
    However, no matter what directions I follow, after rebooting, the IDT codec reinstalls (that is, even after unchecking IDT Audio from the list of start-up programs and uninstalling the codec in device manager) instead of the generic Windows sound driver and IDT Audio is back in the list of start-up programs; the result is that I'm still getting the same rubbish sound. Is there a solution to this? I'm assuming that there is in fact a generic audio driver that I can revert to?
    Many thanks.

    Hi @frran ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 14t-1000 CTO Notebook and having issues with the sound. Here is a link to the HP Support Assistant. Just download and run the application and it will help with uninstalling any software and drivers on your system that were originally installed.
    Here is a document that has troubleshooting for the sound. There could be an update for the BIOS. That might be needed.
    You could try this fix as it has helped with the Beats Audio.
    1. Right click the Speaker icon in the bottom right corner by your time.
    2. Click Playback Devices.
    3. Click Speakers.
    4. Click properties.
    5. Click the advanced tab on the Properties window.
    6. Change the Default Format drop-down to the highest quality.
    7. Apply the properties.
    8. Click OK to close the properties window.
    Hope this helps. 
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Help will not load games on new classic ipod

    I purchase a game that showes up in i tunes but will not load into my new i pod classic. when i pull it up in itunes above the game symbol it says I pod fifth gen. I have a grey ipod so i know it is a classic. it just dosen't load onto the ipod when i sync it. I have load games at sync checked any help?

    Some of the games available from the iTunes Store are not compatible with the iPod classic at this time. Fill out and submit the form on this page for assistance.
    (24554)

  • The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

    The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

    There are several other similar posts in this forum with the answers. Your post appears third in my Google search today looking for a solution so I thought I'd add the solution here as well.
    It is obviously a bug in either (or both) Firefox and the NYT.
    The quickest solution is to simply go to the VIEW Menu in Firefox, then the ZOOM option and choose RESET.
    I use Mac and this happens in Firefox 3.6.10. It does not happen in other browsers like Safari, Chrome and Camino, and it did not occur before last week.
    It has also occurred in the iOS version of Safari on iPad. Not sure how to fix it there.

  • My itunes will not recognize my brand new iphone 5s?

    my itunes will not recognize my brand new iphone 5s? How do i fix this ?

    http://support.apple.com/kb/ts1538

  • Lenovo g550 windows xp drivers will not load

    Help!  I purchased a Lenovo G550 yesterday and am in need of assistance.  Unfortuantely it doesn't appear that there is any way to contact Lenovo, the website doesn't show any method of even emailing them without an IBM service tag (which unless you are corporate user you can't get). 
    I purchased a lenovo g550 yesterday configuration is 3gb ram 160Gb HDD.  Upon booting the system I discovered that in fact users only get access to about 100Gb of the harddrive the rest is set up under multiple hidden drives.  I the system came with windows 7 home edition.  I need windows xp.  So through several hours of work I was able to create some unallocated space on the harddrive.  I loaded my copy of windows xp professional to this space and since windows automatically selects the drive name it is drive D: 
    I went to the lenovo website prior to loading xp and manually downloaded every driver from the site (very time consuming, I saw another way via a forum but was not able to locate it on the lenovo website).  Immendiately after loading xp and rebooting I loaded the intel chipset driver.  Then rebooted.  No other drivers will load for any of the other pieces of hardware.  All of THEM, everyone crashes with an error message that there is not enough disk space on c: to load.  I would guess that there isn't since c: is a 200mb hidden drive created by Lenovo. 
    Does anyone have a work around for this problem with the lenovo drivers?  This has turned into a multi-hour project for something very simple - putting an alternative operating system on the computer.  I cannot put xp as the c: drive because of the lenovo hidden partition is named c:.  I don't want to delete windows 7, as I expect to move to it in the next year but right now I several thousand dollars worth of software in xp and need to use that software. 
    I sure would appreciate any assistance :-)  Again the issue is the lenovo windows xp drivers, everyone of them excluding the intel chipset driver will not load under windows xp when windows xp is loaded onto the d: partition.  they all say they want to load onto the c: parition which is not an option.
    thanks in advance for any help and if anyone knows how to get in contact with lenovo would love that also.

    Well if you do not want win7 all together, then just delete all the partitions and install your XP. But if your not wanting to mess up this drive to be able to use the win7 later then just buy a cheap HDD to put XP on. --> http://www.newegg.com/Product/Product.aspx?Item=N82E16822148452 $10 off and free shipping. but being that you already tried installing XP then you already messed up win7 anyways(if you did not make the restore disks), your better off just deleting and redoing XP.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • G500s drivers will not load

    My lenovo g500s touch refuses to udate drivers from Lenovo driver update. It says i do not meet min system requirements.The hard drive is a fresh reformat with all Microsoft updates complete. I am using a second monitor to try to get it repaired. I had a problem with the touch pad and clickers but found the answer on here. Ran the test from your site and one issue will not download also. I know for certin the display is fine. Thank you for your help

    hi mike6683,
    May I know the OS that you've installed on the G500s and the list of drivers that you're getting the "your system does not meet the minimum requirements" error?
    In addition, if you have an Intel+Nvidia graphics then this uses Optimus Technology to switch between the Intel GPU (for power saving) and Nvida GPU (for maximum performance). To make this work, you will need to install the Intel driver first followed by the Nvidia driver.
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • MBP Retina Windows 7 x64 drivers will not load

    I knew nothing about Mac or OSX and got my MBP running in July.
    Then later I realised I shoudl take advantage of the Solidworks capacity to run 64bit so I removed partition, got the ISO, made the Flash USB, installed Windows 7 x64 and it is now installed.
    But none of the drivers copied in. I used the latest updated Bootcamp 4.0.4 and really the first time I did this everything worked when I installed Win 7 x86 and the pc just started in Windows perfectly all drivers working (except the tap function on trackpad did not work).
    I did everything according bootcamp instructions but no luck this time the drivers did not go in (i think)
    Now my new windows 7 x64 is exactly as per my installaion disk W7 Sp1.0 x64 all there but absolute disaster the screen is not recognised I cannot even start to get the wireless working so no network no internet no help.
    I tried to run the setup.exe from the USB ( where Bootcamp made directorories and copied nicely all the files etc etc) as per the printed copy of the bootcamp installation guide (printed copy on hand) but no success
    What now please help?

    (bump) I have a similar issue. Win7 installed fine but I have a few hardware drivers which did not load, particarly the wifi driver.
    Anyone know how to handle this?
    Thanks-

  • Mavericks will not install on brand new Hard Drive

    Trying to install Mavericks to a brand new internal 2TB Samsung SATA 3.0 HD on a 3-yr old 12 Core Mac Pro system that was running Mnt Lion just fine. After multiple failures upgrading the Mnt Lion disk to Mavericks. Decided to just use a brand spankin' new hard drive and do a clean install of Mavericks. Now during the install to the NEW DRIVE, getting error message "Mavericks cannot be installed." Then I reboot and try to force the continuation of the install, doing this repeatedly, and I sometimes get a error log instead of a just an error message. Error log says: Thread 34 Crashed:: Dispatch queue: com.apple.root.high-priority.  Then the 1st line listed under that is: 0 libsystem_platform.dylib  0x000000010fa5a06a _platform_memmove$VARIANT$Nehalem + 138. If anybody knows what any of that means?
    Thanks.

    Without the full listing of the trace I can't be sure, however it would look more like a bonafide logic board or memory error rather than the HD that's causing  the problem. The low level drivers on Mavericks have obviously changed (otherwise it wouldn't be a different OS version) and possibly they're exposing a lack of performance in your memory. The actual Mavericks install may not be the problem, but rather being corrupted during installation. In the line you quoted, Nehalem is the Intel name for your CPU, the memmove operation failed (move blocks of memory contents from point A to point B) and they shared library containing this was in the system library....sort of critical stuff.
    You could try the following:
    Re-seat the RAM and try again.
    Try an old OS installation and see if it succeeds (Snow Leopard, Lion, Mountain Lion, etc)
    Try an install to an external enclosure
    If re-seating the RAM does the trick, then you're set.
    If it doesn't, then install an older OS to see if they work OK. If older OSes work OK using the internal drive and you have after market memory in the system, it would imply to me that the memory probably isn't quite up to snuff and Mavericks is exposing it. If it's original memory then it should be OK.
    If the older OSes now don't install correctly and it's giving similar problems try doing the install in an external enclosure. The point here being to try to move your data path off the internal SATA cable. If these install OK, try it with Mavericks. If any of these work it could be the SATA cable or I/O controllers on the logic board (SATA cable most likely).  A good reference for these sorts of problems is:
    Bad Hard Drive Signs and Symptoms
    Possibly a last option, which I would think (or hope) would be rare, would be that the binary for Mavericks install got corrupt during download. You could also try some of the resets they have in the linked document above. They might work and it doesn't take any effort.
    Good Luck

  • My iMac literally will not turn on (brand new)

    My brand new 27 inch iMac is not even a few weeks old. I've had in about 2 weeks I'd say. I had everything set up on it, it was completely up to date, plus I installed all new software on it, each only allowing 1 install (Final Cut, iwork,etc.)
    It started turning itself off every now and then and I figured it was my family doing it thinking I wasn't using it because I always kept it on and let it go into sleep.
    It was on earlier today. I hit the mouse to wake it up and realized it wasn't on so I tried to turn it on. Nothing. Held the button in. Nothing. Checked the cord several times, checked the wall outlet, tried different outlets, removed all accessories, I tried everything I could that I found in troubleshooters. Absolutely nothing.
    Needless to say I'm incredibly angry. This is a brand new computer and it will no longer TURN ON. I only spent the last two weeks personalizing it with programs, apps, information, everything and now it won't turn on! Ya, I could put the hard drive in a different computer but thats not the point. This is not a problem I should be having and I find it outrageous that its happening. What's going on here and how do I fix it?

    I'm having a very similar issue - not yet two week old iMac 27 shut off tonight and will not turn back on. I tried all the stuff found in the trouble shooting section (reset SMC, PRAM). Once,the fan powered up on high, but nothing else came on. Now I cannot get it to respond at all. I've checked the plugs, tried the power cord from my still working older iMac 20, but absolutely nothing. It shut off once as I was plugging in a powered 7 port USB hub, but I thought I may have bumped the power cord somehow and it shut down.
    I restarted the computer, but couldn't find the items that were on the USB hub, a printer and external DVD drive, so tried the hub in a different USB port on the back of my Mac. As I plugged in the hub, the computer shut down, and I haven't been able to start it again. I had already used this hub on my iMac 27 - we moved the computer into another room and were putting everything back together.
    Any ideas?

  • Firefox will not load on a new laptop. Keeps returning "runtime error".

    After loading Firefox 3.6 on a new laptop, it ran for a while. Then, it would not run. Keeps returning. "Microsoft Visual C++ Runtime Library: Runtime error. This program has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information."
    Uninstalling and then reinstalling the latest version of Firefox does not help the problem.
    Laptop running Win7.64, 4GB RAM, i5 processor.
    Thank you.

    Automatic "syncing" of content (such as song files) using iTunes is generally only in one direction, from computer to iPod.  So, iTunes will not put songs back on the computer's hard drive from the iPod using syncing.  The assumption for syncing is that everything on the iPod is already in the computer's iTunes library.
    Previous song purchases from the iTunes Store can be re-downloaded at no cost from the iTunes Store Purchased screen.  The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.  You need to be signed in with the Apple ID used to make the purchases.
    There are third-party methods and utilities that can transfer song files from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.

  • Google will not load on my new MacbookPro but why?

    I'm going to make this as clear as possible, but may miss something so bear with me.
    I've owned an iPad and iPhone for a while but just yesterday purchased my first MacBook Pro which is the first apple computer I've owned. I'm still learning my way through the menus since I've been a PC user its a little different but rocket science. I'm relatively smart about these kinds of things, but when offering up suggestions it would help to tell me how to get to certain menu options as I'm still finding my way around.
    THE ISSUE:
    When I use Safari, I can visit whatever website I want but for some reason google won't load. Safari comes with the search bar at the top of the browser for easy searching, which brings up common suggestions (I thought came from google) and if I click one, it doesn't load the results. Furthermore I cannot get www.google.com or any variation of that link including 8.8.8.8 to load the google webpage. It just WONT LOAD. Every other site I've tried to visit, however, loads quickly and without any problem.
    I've never had any sort of problem with google on any other computer, ipad or iphone in my home and my network is set up to allow it. The only related pages I've found on the internet suggest people are using PeerGuardian or some software I have not had the time to install as I just got the computer, theres' nothing on it that didn't come on it shy of a few photos.
    After tinkering with the ping menu,  I came to realize this problem is intermittent. I first got 'domain cannot be verified' as a result, then later it pings google, and i can visit the site, but only for a few seconds before it goes out again. Usually google works only long enough to see results but upon clicking any of them it stops working again and wont load.
    Before I could finish this google started working properly, and now discissions.apple.com won't load any threads at all, where it used to load them all just fine. I'm writing this from my PC because the oh so awesome macbook pro is moody about what sites it wants to load and when it wants to load them.
    This is so random I don't even know how to begin trouble shooting this without assuming its my network, but my network is totally fine its never had a problem before and ive been on it with multiple machines for years.

    I don't think it's your network ...
    Try this...
    From the Safari menu bar top of your screen click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Quit then relaunch Safari to test. If it was a cookies issue, that may help.
    And in case you aren't aware, when you have trouble with sites loading, trying emptying the Safari cache.
    Back to the menu bar, click Safari > Empty Cache
    Or Command + Option + E on your keyboard.
    As for Peer Guardian. Best to avoid third party firewall blockers.
    Your Firewall settings are located in System Preferences > Security & Privacy > Firewall
    Very important to keep your system software up to date. Back to System Preferences > Software Update > Scheduled Check
    Select:  Check for updates.  Best to select Daily from the pop up menu. Then select:  Download updates automatically.
    You'll see a dialog box on the Desktop when there are updates available to be installed.
    These support links may come in handy ..
    Apple - Find Out How - Mac Basics
    Apple - Support - Switch 101
    Apple product tutorials

  • Some website will not load when their new tab comes up, just a blank page that says done on the bottom

    if i'm on a site and click a link to open a new tab, the tab will open but the page never loads. i just get a blank page, and instead of the page name on the new tab, it says "click (GIF Image, 1x1 pixal)" and the address bar will have this http://click.linksynergy.com/fs-bin/click?id=6o8JG0hWlQI&offerid=143696.10000259&subid=0&type=4&afsrc=1&u1=01_2270023365_101019092649_184443883_Z. this happens to me on more than one site. i can't figure it out...please help. if you click on the link, you'll see what i see when the new tab open. i hope someone can tell me how to fix this.

    Many thanks, solved issue I have had for weeks

  • IPhone 5 will not connect to brand new MBA/iTunes. Error message is "iTunes could not connect to this iPhone. Could not connect to the device."

    Hi!
    I've had my iPhone 5 for just over a year now, and I haven't really had any problems since iOS7 was installed. I had a PC, with no connectivity problems between any of my Apple devices. Then FINALLY, I purchased my very first Macbook Air 13". I set it all up, updated all the apps, and made sure it was good to go. My iPhone was really low on battery one day, and I just happened to have my USB for it handy and thought I would just plug it into my computer to charge it. I figured I worry about syncing it later as I hadn't really had time to set it all up with iTunes on the new computer.
    MY PHONE WENT CRAZY. It just started vibrating all over the table. Looking at the battery icon, it was flipping between charging and not charging, and occasionally the "do you trust this device" window would pop up on the screen, but it was still going crazy. iTunes opened up and these alerts saying "iTunes could not connect to this iPhone. Could not connect to the device." and "iTunes could not connect to this iPhone. This device is no longer connected." All it was doing at this point was using up even more battery. But then the iPhoto app opened by itself on my shiny new Macbook and the vibrating stopped. It was charging and syncing! But not having iPhotos before on a computer weirded me out i hadn't decided exactly what I wanted to do with it, I closed the app. The phone went nuts again. ***. On a different day, I was trying to sync it again, and it worked. But only long enough to back it up on the macbook. W.T.F.
    Plugging into any PC is no problem at all. The phone just connects and starts charging.
    I've tried just about everything. All of my software is up to date, both on the mac and iphone. The USB cord is fine. I've reset the macbook with it plugged in and not plugged in. I have uninstalled, and reinstalled iTunes with the phone plugged in and not plugged in. I've reset all the contents and settings on my iPhone, as well as did a hard reset with it plugged in and not plugged in. My iPad has no problem connecting and it also has iOS7. It's just so weird though, that it starts connecting/disconnecting interchangeably as soon as I plug it into the computer, even when all my apps are closed. All this is leading me to believe that it must be some sort of issue between the devices' communication to each other. But I'm not sure if it's an iPhone, MacBook, or iTunes issue!
    HHHHEEEEELLLLLLPPPPP!!!!!

    I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
    Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

  • ITunes will not load to my new MacBook Pro

    Transferred everything from MacBook to new MacBook Pro. Everything is working except iTunes. Restarting, disinstalling, and reinstalling makes no difference as iTunes starts checking the iTune library and then displays the message "iTunes quit unexpectedly" allowing you to send a report to Apple.
    This is the first part of the report:
    Process: iTunes [752]
    Path: /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier: com.apple.iTunes
    Version: 9.2.1 (9.2.1)
    Build Info: iTunes-9210501~4
    Code Type: X86 (Native)
    Parent Process: launchd [96]
    Date/Time: 2010-08-23 21:43:27.704 -0700
    OS Version: Mac OS X 10.6.3 (10D2101a)
    Report Version: 6
    Interval Since Last Report: 17413 sec
    Crashes Since Last Report: 48
    Per-App Interval Since Last Report: 2761 sec
    Per-App Crashes Since Last Report: 46
    Anonymous UUID: C74A4A22-DEF0-4456-AB4F-AF9D1DF8B914
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000001002
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 com.apple.iTunes 0x00030000 0x1000 + 192512
    1 com.apple.HIToolbox 0x92c82109 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1567
    2 com.apple.HIToolbox 0x92c813d0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
    3 com.apple.HIToolbox 0x92c8122f SendEventToEventTargetWithOptions + 58
    4 com.apple.HIToolbox 0x92ca7222 HIView::SendVisibilityChanged() + 146
    5 com.apple.HIToolbox 0x92ca727c HIView::AncestorBecomingVisible() + 60
    6 com.apple.HIToolbox 0x92ca72b3 HIView::AncestorBecomingVisible() + 115
    7 com

    loganbill wrote:
    Transferred everything from MacBook to new MacBook Pro.
    how did you do that ?
    i've found the most successful method to transfer an iTunes library from one Mac to another is this:
    connect the two Macs with a firewire cable, boot the source Mac in _*Target Disk Mode*_, and copy the entire iTunes folder (not just the iTunes music folder) from <MacintoshHD>/users/<yourname>/music on the source to <MacintoshHD>/users/<yourname>/music on the target (overwriting the iTunes folder in place there).
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000001002
    your profile suggests you're on 10.6.3. if that's the case, i suggest you do this:
    (a) download the [_*Mac OS X v10.6.4 Update (Combo)*_|http://support.apple.com/kb/dl1048]
    (b) repair permissions using *disk utility* and reboot your Mac into _*safe mode*_
    (c) run the combo while in *safe mode*.
    (d) when the updater is done, let your Mac reboot normally
    (e) repair permissions again
    please post back with results !
    JGG

Maybe you are looking for