DP cluster filed in transaction /SAPAPO/MAT1- Extras

Hello Experts,
Can you please let me know if the field DP cluster is a standard field in the transaction /sapapo/mat1 under Extras tab.
Meaning Transaction : /sapapo/mat1
Tab : Extras/Extra attributes
field : DP cluster
I would like to know if the field DP cluster is a standard field in the transaction /sapapo/mat1.
Thanking you all for your support in advance,
Warm Regards,
gayatri.

Hi Gayatri,
The fields on the tab "extra" and standard but customised.
Go to SPRO >
SCM Basis
Master Data
Maintain Freely-Definable Attributes
You can see some attribute for the product, the location and the prodcut location.
From here you should see your DP cluster.
For sure the field is not populated automatically, it is either populated manually or via enhancement. The later is more likely.
I hope it helps
Thanks and Regards
Julien

Similar Messages

COM - error Unknown in /sapapo/mat1 transaction

Hi,
I am using SCM 4.1 and LiveCache 7.5.0.
In the transaction /sapapo/mat1 i select a product and its location.
Then in the Extras Menu when i select Where-Used List, it shows the message "COM - error Unknown"
COM - error Unknown
Message no. /SAPAPO/OM001
Diagnosis
A COM routine has encountered a program error.
System response
The program will be terminated.
Procedure
Start the program again.
If this message appears again, contact your system administration.
Please help me on this.
Regards,
Chintan

hi - try running the livecache consistency check (/n/sapapo/om17) for product-locations and correct any errors that may be detected and try again to use the where-used functionality.
Regards
Vinod

/N/SAPAPO/MAT1 question

Hello Guru,
i have a question on tcode /N/SAPAPO/MAT1, in the extra tab we have a field (Dem Exclu. from SS) can anyone of you know what is the use of this field? can it affect the demand requirement planning in APO?

Hi,
Please follow below path to add/check custom fields in Product Master(MAT1).
SPRO -> SAP SCM - Implementation Guide> Advanced Planning and Optimization>Master Data--> Maintain Freely-Definable Attributes
AT*     --> /SAPAPO/MATLOC (Extra Attribute section in EXtra Tab in MAT1)
ATT*     --> /SAPAPO/MATKEY (Additonal data section in Properties Tab in MAT1)
ATTL*     --> /SAPAPO/LOC     (Addit.Tab in LOC3)
Hope this info will help you.
Thank you
Satish Waghmare

Log changes in /SAPAPO/MAT1 - Product

Hello,
anyone knows if there is a modification log for product master data in SCM for changes done in /SAPAPO/MAT1 - Product ?
We have CIF to create and update product master data from R3 to scm but we have field Forward Consumption Periodo changed and it is ok in R3 so It must have been changed directy in SCM.
Is there any way to see changes in this system?
Tkanks,
Teresa Lopes

Teresa,
It is possible - if change document logging is turned on. In SCM, the system is delivered with the logging turned off. You must explicitly turn it on in order to be able to review changes.
Product master changes can be reviewed in transaction /SAPAPO/PROD_CD_READ. Do not leave product or location blank, use asterisk instead for 'wild card'.
If nothing is found, then logging is not turned on. You can confirm by looking at table CDHDR, where the change data is stored.
To turn change recording 'on', IMG > APO > Master Data > Product > Activate change documents.
Best Regards,
DB49

Difference between material(/SAPAPO/MAT1) & material(/SCWM/MAT1)

Hi Experts,
I am new to EWM & I am confuse between Product(/SAPAPO/MAT1)
& Product(/SCWM/MAT1) ?.
Please anyone outline me some brief about above to product in EWM.
Regards,
Rock

Hi Rock,
In order for the Product to be relevant for the EWM system you need to maintain only the /SCWM/MAT1 - Maintain Warehouse Product transaction. There you will find the screen tabs that are relevant only for EWM. All the tabs that have the little hat came automatically from the CIF from the ECC system and all those that do not have the hat are the ones strictly relevant for the EWM system so these are the only ones that you need to maintain.
As I mentioned earlier, the /SAPAPO/MAT1 - Maintain Product transaction is for APO and does not make a product relevant for the EWM Warehouse.
All the best,
Claudiu Maxim

Base UoM in /SAPAPO/MAT1

Hi Folks,
Is it possible to change the Base Uom in the /SAPAPO/MAT1?
I have bussines requirements where the ECC (R/3) material has to be changed to diff base Uom (it is not used yet).
now this chagnes will fo to APO through CIF but the CVC is created in APO and that's the reason it is failing in the CIF.
my integration model fails and i can not chagne the Uom in /SAPAPO/MAT1.
Is there anyway i can chagne the base Uom in APO.

Charlie, I think the easiest way is to delete the material in APO and re-cif.
/sapapo/mat1. Pull down menu Product > Flag for Deletion > Deletion Flag: Location Product.
The pop-up will ask delete immediately yes/no, choose yes. Then re-cif from R/3.
If you have dependent objects, like orders, transportation lanes, ppm/pds then you have to delete those too. From version 5.0 the wuf transaction helps identify these.
Chris

APO /SAPAPO/MAT1 Authorization with check based on SNP planner

Hello,
We want to maintain authorization profile enabling to have a filter on /SAPAPO/MAT1 based on the value of the SNP Planner.
Standard transaction PFCG does not brings back the SNP Planner as being a checked object when using /SAPAPO/MAT1 in the menu
So, I used transaction SU24 and changed the setting for /SAPAPO/MAT1 : I added the authorization object C_APO_PLNR SNP Planner with check indicator "Check" and proposal "YS" . The status is now green for this object but I do not have understood if I had also to maintain TSTCA column "status: check at transaction start". In any case, I did not found how to activate it.
With this setting, I also competed with PFCG the required value for SNP Planner.
Result: it does not work. Could some one help ?
Regards,
Christine

Hi Christine
Please check OSS Note 1464451 (Authorisations in APO Master Data). I dont think you can directly use SNP Planner as a basis for authorization without an enhancement.
RIshi Menon

/SAPAPO/MAT1

Hi Guys,
I have product number with me , and now i want to see the location attached to it , but in /SAPAPO/MAT1 when i press F4 i am getting list of all , location so tell me how to check what are the locations aplicable to this product.
Regards

Hi ,
Go by as suggested by senthil ,
Enter transaction /sapapo/rrp3
enter planning version as 000
enter your *product number * and
press F4 in llocation field it will show you the applicable location.
If you havent find any , it means that your product is maintained globaly but not extended to any specific location
Hope it helps you.
Regards
Ritesh

BADI / User Exit for APO Order transaction /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

BADI/User Exit for APO Transaction: /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

REG: Creation of Warehouse product using transaction /SCWM/MAT1

Hi,
My requirement is to create Warehouse Products using Transaction /SCWM/MAT1 , I am using BAPI_PRDSRVAPS_SAVEMULTI2 , but I cound't able to process this because I did find Warehouse number in this BAPI, Am I using correct BAPI, if that is the case let me know the BAPI for warehouse product data,
Thanks
RK

Hi,
There is no specific list, it depends completely on the condition types that have been configured in your system.
The answer you were given was a good one and gave you as much detail as you could expect.
If you are having a particular problem or issue then let us know and we will do all that we can to help.
The easiest way to find out the "list" is to simply click on the "possible entries" tab at the right of the field. !!!!!!!!!!!
Steve B

Unable to check the PDS in transaction /sapapo/curto_simu

Hello Experts,
I am using BAPI 'BAPI_PDSSRVAPS_SAVEMULTI' to create the PDS, i can see the pds getting created in /sapapo/trprod and as well i am able to get the PDS details through 'BAPI_PDSSRVAPS_GETLIST',
But using Transaction '/sapapo/curto_simu' i am unable to get any results for the product.
don't know why?
Thanks
Surbhi

Hi Gemini,
In se37 transaction in the input field, i have entered the 'BAPI_QUOTATION_CREATEFROMDATA2' and clicked on the button ' DISPLAY',but in the status bar i am getting the messsage as 'PROCESSING CANCELLED'.
I think in some transaction something has to be done,so that this can be viewd in SE£7 tcode.
Regards,
Xavier.P

Use of Freeze Alert in transaction /SAPAPO/AMON1

Hi,
We have button for Freeze Alert in transaction /SAPAPO/AMON1
I want to know what is use of this function.Is it used only for certain alert types?
Thanks,
Lalit

Hello,
Freeze alerts are used to Put alerts on hold with the freeze/unfreeze tool. After a refresh, new alerts are marked with a + and alerts that have disappeared are marked with a -, as compared to the last frozen alert situation.
This is used to Simulate the alerts for creation and view the impact of the alerts created and then can mak the decision to save or to unfreeze the alerts.
Hope the information is helpful
Regards

Unable to see demand history in APO SPP via transaction /SAPAPO/SPPMDH

Hello
We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
The replenishment indicator is stocked & the forecast periodicity is maintained as well.
Could you please let us know if anything is missing? Thanks in advance

Santanu Paul wrote:
Hello
>
> We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
>
> We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
>
> Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
>
> However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
>
> The replenishment indicator is stocked & the forecast periodicity is maintained as well.
>
> Could you please let us know if anything is missing? Thanks in advance
Hello,
Check this stuff (from help.sap.com) we had a quite similar issue, until we've fixed it:
For the demand categories we defined to be in your system, you have transferred the DataSources 9ADEM_CAT and 9ADEM_CAT_TXT as well as InfoSources 9ADEM_CAT and 9ADEM_CAT_TXT to the Business intelligence system (BI system) in SAP SCM and activated them. You have transferred the following InfoPackages for these InfoSources:
● Load Master Data from APO
● Load Texts for Demand Categories from APO
Note
Each time you change the relevant for forecast indicator of a demand category, you have to reactivate the master data of characteristic 9ADEM_CAT.

Transaction /SAPAPO/BOP in APO

Hi All,
I need to simulate the transaction / SAPAPO / BOP in an RFC. I created a shdb to do the batch input, but some screens are dynamically generated is not possible to realize the batch input in all environments, because the name of the screens change according to the environment.
How can I do to simulate this operation, anyone know? Someone knows some BAPI which does it?
Regards.

Hi Alexander,
That is what I have there:
BSG         Log.sys ;    R/3 Flag   Rel.   Queue Type Error Handl.                                  Role
APO_PRD P00400     Y              ECC5 Inbound      Queues Strict (Terminate at Errors) Not Specified
APO_PRD P10400                       3.50 Outbound      Queues Strict (Terminate at Errors) Not Specified
APO_PRD P20400                       41 Inbound           Queues Strict (Terminate at Errors) Not Specified
APO_PRD P22400                       700 Inbound         Queues Strict (Terminate at Errors) Not Specified
Do you have an idea if the R/3 flag should be Y or X. Does it matter?
Edited by: Alper Myumyun on Mar 19, 2009 1:20 PM

DP cluster filed in transaction /SAPAPO/MAT1- Extras

Similar Messages

Maybe you are looking for