DPC Errors P6NGM-FD with Nvidia 8600GTS
Hello,
I get a lot of DPC errors with the P6NGM-FD mainbord in combination with the 8600GTS video card.
I use the dpc latency checker and almost tried every tip and trick i could find on the Internet.
The only workaround is to use the standard VGA driver. Then the DPC latencys are less but still spikes till 12000 us.
I use the latest 2.3 bios version.
Anybody with the same issues or does anybody have a solution..???
thx
Eddie
# CPU : Intel Core 2 Quad 6600 @2,40 Ghz
# Motherboard model: MSI P6NGM-FD Ami Bios V2.3
# Memory: 2x2GB GEIL DDR2 PC2-6400 (400Mhz)
# Video card: nVIDIA 8600 GTS 256MB PCI-E
# Hard drive: 2 x 500Gb SATA WD
# Operating system : Vista Ultimate SP1 32 bit.
# Power Supply : 750 Watt.
Full system specs and PSU specs amps, please.
>>Posting Guide<<
Similar Messages
-
I just installed linux-ck and nvidia-ck.
It work fine, but should I had to remove nvidia driver before installation of nvidia-ck one?
It seems that there is no errors or conflicts with nvidia and nvidia-ck, but which one is current driver nvidia or nvidia-ck?In my experience, nvidia propreitory drivers work the nicest on newer cards. Nvidia are the current drivers. I had trouble with nouveau on my gtx465, and the nvidia drivers sorted that all out. Just make sure you do nvidia-xconfig to make a functional xorg.conf file to work with the nvidia drivers.
Perhaps you could gauge if nvidia-ck works on your card by seeing if GNOME3 starts in fallback or the regular gnome3.
Live long, and prosper. -
Serious boot error. very annoying. P6NGM mobo. NVIDIA mcp73 chipset
Serious boot error. very annoying. P6NGM mobo. NVIDIA mcp73 chipset
I have a 80gb Western Digital that i installed xp on using another computer but it still wont boot nor will the cd drive boot even with a 100% original valid windows installation disc.
No matter what I do I always get the stupid "Reboot and Select proper Boot device or insert Boot Media in
selected Boot device and press any key."
At first i thought the motherboard was fried so i sent it back and had it replaced. Put it together, booted it, still the same problems. I have the hard drive set as master drive and it has windows xp installed but it still wont boot from it. please assist
System is:
# Intel Core 2 Duo E6750 Conroe 2.66GHz 4M shared L2 Cache LGA 775 65W Dual-Core Processor
# P6NGM Motherboard (MS-7366)
# 1GB RAM
# Onboard NVIDIA MCP73 Series Chipset
# Western Digital Caviar SE WD800JB 80GB 7200 RPM 8MB Cache IDE Ultra ATA100 Hard Drive
# Windows XP SP1 already installed on the hard drive using another computer
# 400W Power SupplyTake attention to WD jumper config:
Jumperless = Standalone
Jumper master = Master with Slave
Jumper slave = Slave with Master
Leave WD drive alone in the channel and remove jumper from the drive:
Make sure that IDE cable is connected in correct direction, (blue to mainboard and black to HDD in a picture below): -
[SOLVED]startx error with nvidia 740M
I have very usual problem with my nvidia driver, but none of the solution that I found works. I do search for using bumblebee and other but still not work. I still have same error "no device detected" and "no screen found". I also try to use nvidia-xconfig and Xorg -configure but I still got same result. When I delete the xorg.conf I fallback to use vesa driver, what should I do? sorry for my bad english. here is my Xorg.1.log and xorg.conf
Xorg.1.log
[ 2449.439]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 2449.439] X Protocol Version 11, Revision 0
[ 2449.439] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 2449.439] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
[ 2449.439] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9b809ed1-15a9-4df5-931c-b081da1ca0fc rw acpi=off i915.modeset=1 quiet
[ 2449.439] Build Date: 14 April 2014 08:39:09AM
[ 2449.439]
[ 2449.439] Current version of pixman: 0.32.4
[ 2449.439] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2449.439] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2449.439] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jun 26 07:48:32 2014
[ 2449.439] (==) Using config file: "/etc/X11/xorg.conf"
[ 2449.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2449.439] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2449.439] (==) ServerLayout "Layout0"
[ 2449.439] (**) |-->Screen "Screen0" (0)
[ 2449.439] (**) | |-->Monitor "Monitor0"
[ 2449.439] (**) | |-->Device "Device0"
[ 2449.439] (**) |-->Input Device "Keyboard0"
[ 2449.439] (**) |-->Input Device "Mouse0"
[ 2449.439] (==) Automatically adding devices
[ 2449.439] (==) Automatically enabling devices
[ 2449.440] (==) Automatically adding GPU devices
[ 2449.440] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2449.440] Entry deleted from font path.
[ 2449.440] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2449.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2449.440] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2449.440] (WW) Disabling Keyboard0
[ 2449.440] (WW) Disabling Mouse0
[ 2449.440] (II) Loader magic: 0x804c80
[ 2449.440] (II) Module ABI versions:
[ 2449.440] X.Org ANSI C Emulation: 0.4
[ 2449.440] X.Org Video Driver: 15.0
[ 2449.440] X.Org XInput driver : 20.0
[ 2449.440] X.Org Server Extension : 8.0
[ 2449.441] (--) PCI:*(0:0:2:0) 8086:0a16:1028:0616 rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 2449.441] (--) PCI: (0:9:0:0) 10de:1292:1028:0616 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 2449.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2449.441] Initializing built-in extension Generic Event Extension
[ 2449.441] Initializing built-in extension SHAPE
[ 2449.441] Initializing built-in extension MIT-SHM
[ 2449.441] Initializing built-in extension XInputExtension
[ 2449.441] Initializing built-in extension XTEST
[ 2449.441] Initializing built-in extension BIG-REQUESTS
[ 2449.441] Initializing built-in extension SYNC
[ 2449.441] Initializing built-in extension XKEYBOARD
[ 2449.441] Initializing built-in extension XC-MISC
[ 2449.441] Initializing built-in extension SECURITY
[ 2449.441] Initializing built-in extension XINERAMA
[ 2449.441] Initializing built-in extension XFIXES
[ 2449.441] Initializing built-in extension RENDER
[ 2449.441] Initializing built-in extension RANDR
[ 2449.441] Initializing built-in extension COMPOSITE
[ 2449.441] Initializing built-in extension DAMAGE
[ 2449.441] Initializing built-in extension MIT-SCREEN-SAVER
[ 2449.441] Initializing built-in extension DOUBLE-BUFFER
[ 2449.441] Initializing built-in extension RECORD
[ 2449.441] Initializing built-in extension DPMS
[ 2449.441] Initializing built-in extension Present
[ 2449.441] Initializing built-in extension DRI3
[ 2449.441] Initializing built-in extension X-Resource
[ 2449.441] Initializing built-in extension XVideo
[ 2449.441] Initializing built-in extension XVideo-MotionCompensation
[ 2449.441] Initializing built-in extension XFree86-VidModeExtension
[ 2449.441] Initializing built-in extension XFree86-DGA
[ 2449.441] Initializing built-in extension XFree86-DRI
[ 2449.441] Initializing built-in extension DRI2
[ 2449.441] (II) "glx" will be loaded by default.
[ 2449.441] (II) LoadModule: "dri2"
[ 2449.441] (II) Module "dri2" already built-in
[ 2449.441] (II) LoadModule: "glamoregl"
[ 2449.441] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2449.443] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2449.444] compiled for 1.15.0, module version = 0.6.0
[ 2449.444] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2449.444] (II) LoadModule: "glx"
[ 2449.444] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2449.444] (II) Module glx: vendor="X.Org Foundation"
[ 2449.444] compiled for 1.15.1, module version = 1.0.0
[ 2449.444] ABI class: X.Org Server Extension, version 8.0
[ 2449.444] (==) AIGLX enabled
[ 2449.444] Loading extension GLX
[ 2449.444] (II) LoadModule: "nvidia"
[ 2449.444] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2449.445] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2449.445] compiled for 4.0.2, module version = 1.0.0
[ 2449.445] Module class: X.Org Video Driver
[ 2449.445] (II) NVIDIA dlloader X Driver 337.25 Tue May 27 12:01:55 PDT 2014
[ 2449.445] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2449.445] (++) using VT number 1
[ 2449.445] (EE) No devices detected.
[ 2449.445] (EE)
Fatal server error:
[ 2449.445] (EE) no screens found(EE)
[ 2449.445] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2449.445] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 2449.445] (EE)
xorg.conf that nvidia-xconfig generate
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.25 (buildmeister@swio-display-x64-rhel04-10) Tue May 27 13:05:19 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by kal17 (2014-06-26 15:47:04)I just try that, and still get error. but the error are slightly different, here it is:
Xorg0.log
[ 197.655]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 197.714] X Protocol Version 11, Revision 0
[ 197.735] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 197.756] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
[ 197.756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9b809ed1-15a9-4df5-931c-b081da1ca0fc rw acpi=off i915.modeset=1 quiet
[ 197.801] Build Date: 14 April 2014 08:39:09AM
[ 197.823]
[ 197.844] Current version of pixman: 0.32.4
[ 197.888] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 197.888] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 197.983] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 26 11:37:55 2014
[ 198.008] (==) Using config file: "/etc/X11/xorg.conf"
[ 198.033] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 198.034] (==) ServerLayout "Layout0"
[ 198.034] (**) |-->Screen "Screen0" (0)
[ 198.034] (**) | |-->Monitor "Monitor0"
[ 198.034] (**) | |-->Device "Device0"
[ 198.034] (**) |-->Input Device "Keyboard0"
[ 198.034] (**) |-->Input Device "Mouse0"
[ 198.034] (==) Automatically adding devices
[ 198.034] (==) Automatically enabling devices
[ 198.034] (==) Automatically adding GPU devices
[ 198.034] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 198.034] Entry deleted from font path.
[ 198.034] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 198.034] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 198.034] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 198.034] (WW) Disabling Keyboard0
[ 198.034] (WW) Disabling Mouse0
[ 198.034] (II) Loader magic: 0x804c80
[ 198.034] (II) Module ABI versions:
[ 198.034] X.Org ANSI C Emulation: 0.4
[ 198.034] X.Org Video Driver: 15.0
[ 198.034] X.Org XInput driver : 20.0
[ 198.034] X.Org Server Extension : 8.0
[ 198.034] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 198.035] (--) PCI:*(0:0:2:0) 8086:0a16:1028:0616 rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 198.035] (--) PCI: (0:9:0:0) 10de:1292:1028:0616 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 198.035] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 198.061] Initializing built-in extension Generic Event Extension
[ 198.087] Initializing built-in extension SHAPE
[ 198.113] Initializing built-in extension MIT-SHM
[ 198.140] Initializing built-in extension XInputExtension
[ 198.166] Initializing built-in extension XTEST
[ 198.192] Initializing built-in extension BIG-REQUESTS
[ 198.219] Initializing built-in extension SYNC
[ 198.245] Initializing built-in extension XKEYBOARD
[ 198.272] Initializing built-in extension XC-MISC
[ 198.298] Initializing built-in extension SECURITY
[ 198.324] Initializing built-in extension XINERAMA
[ 198.350] Initializing built-in extension XFIXES
[ 198.376] Initializing built-in extension RENDER
[ 198.402] Initializing built-in extension RANDR
[ 198.429] Initializing built-in extension COMPOSITE
[ 198.455] Initializing built-in extension DAMAGE
[ 198.481] Initializing built-in extension MIT-SCREEN-SAVER
[ 198.507] Initializing built-in extension DOUBLE-BUFFER
[ 198.533] Initializing built-in extension RECORD
[ 198.559] Initializing built-in extension DPMS
[ 198.585] Initializing built-in extension Present
[ 198.610] Initializing built-in extension DRI3
[ 198.636] Initializing built-in extension X-Resource
[ 198.660] Initializing built-in extension XVideo
[ 198.682] Initializing built-in extension XVideo-MotionCompensation
[ 198.703] Initializing built-in extension XFree86-VidModeExtension
[ 198.724] Initializing built-in extension XFree86-DGA
[ 198.745] Initializing built-in extension XFree86-DRI
[ 198.765] Initializing built-in extension DRI2
[ 198.765] (II) LoadModule: "glx"
[ 198.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 198.775] (II) Module glx: vendor="NVIDIA Corporation"
[ 198.775] compiled for 4.0.2, module version = 1.0.0
[ 198.775] Module class: X.Org Server Extension
[ 198.775] (II) NVIDIA GLX Module 337.25 Tue May 27 12:21:38 PDT 2014
[ 198.796] Loading extension GLX
[ 198.796] (II) LoadModule: "nvidia"
[ 198.796] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 198.796] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 198.796] compiled for 4.0.2, module version = 1.0.0
[ 198.796] Module class: X.Org Video Driver
[ 198.796] (II) NVIDIA dlloader X Driver 337.25 Tue May 27 12:01:55 PDT 2014
[ 198.796] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 198.796] (++) using VT number 1
[ 198.796] (II) Loading sub module "fb"
[ 198.796] (II) LoadModule: "fb"
[ 198.797] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 198.797] (II) Module fb: vendor="X.Org Foundation"
[ 198.797] compiled for 1.15.1, module version = 1.0.0
[ 198.797] ABI class: X.Org ANSI C Emulation, version 0.4
[ 198.797] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 198.797] (II) Loading sub module "wfb"
[ 198.797] (II) LoadModule: "wfb"
[ 198.797] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 198.797] (II) Module wfb: vendor="X.Org Foundation"
[ 198.797] compiled for 1.15.1, module version = 1.0.0
[ 198.797] ABI class: X.Org ANSI C Emulation, version 0.4
[ 198.797] (II) Loading sub module "ramdac"
[ 198.797] (II) LoadModule: "ramdac"
[ 198.797] (II) Module "ramdac" already built-in
[ 198.797] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 198.797] (==) NVIDIA(0): RGB weight 888
[ 198.797] (==) NVIDIA(0): Default visual is TrueColor
[ 198.797] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 198.798] (**) NVIDIA(0): Enabling 2D acceleration
[ 198.810] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:9:0:0. Please
[ 198.810] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 198.810] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 198.810] (EE) NVIDIA(GPU-0): README for additional information.
[ 198.810] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 198.810] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 198.810] (II) UnloadModule: "nvidia"
[ 198.810] (II) UnloadSubModule: "wfb"
[ 198.810] (II) UnloadSubModule: "fb"
[ 198.810] (EE) Screen(s) found, but none have a usable configuration.
[ 198.810] (EE)
Fatal server error:
[ 198.810] (EE) no screens found(EE)
[ 198.810] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 198.810] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 198.810] (EE)
[ 198.926] (EE) Server terminated with error (1). Closing log file.
I also tried to use nouveau but I still error. -
Nvidia 8600gt with DVI to HDMI cable on Samsung 32'' screen
hi, got setup arch on a friend's pc with the title's featured for viewing...although that is viewable we cannot make it work properly (with the same quality as it is on windows...which is day and night...), is there any options which we can work on them for getting the best quality because of the connection? i tried from nvidia-settings but i cannot find any option for "cable changing"..what should i change to make this work properly? (the current display is 1024x768. he wants big letters for easier reading..)
ty in advancedI have nvidia 8400m gs and hda-intel, hdmi just does not work properly. The resolution is by default wrong and does not fit into the screen. If I use 1920x1080 the text is almost unreadable. Further, hdmi+audio does not work at all. I use nvidia-xconfig to set up X and NVIDIA X Server Settings in gnome to choose the TV screen. I have a 32'' Samsung flat screen tv.
VGA cable works for video and sound with an audio cable from laptop headphones to TV PC in. The resolution is quite ok - 1360-768 and sound works thru the tv speakers.
What I have found googling is quite contradictory. But it seems nvidia hdmi on linux is not yet fully implemented. ATI Radeon on the other hand seems to work better.
As the hdmi cables are quite expensive, especially the gold plated ones, I would discourage linux users for the moment to have too high expectations on getting hdmi+audio to work for nvidia cards, at least not on hp pavilion notebooks. It might also be a question of hp notebooks with nvidia not having any connector between the graphics card and the audio card, as the audio is being transmitted over the hdmi port. However, HP is quite uninterested in support, and plucking asunder a laptop is not that appealing to find out audio chips and eventually missing connectors between sound card and video card.
To sum it up, vga is better for the moment.
Last edited by linfan (2009-02-01 13:35:51) -
[SOLVED?] Problem with nVidia card
This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit. -
Hello,
I have a laptop with the Nvidia Optimus technology. I followed the wiki, and now I get a blank screen.
This is the guide that I followed: https://wiki.archlinux.org/index.php/NV … ing_nvidia
This is my /var/log/Xorg.0.log file:
[ 341.985]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 341.987] X Protocol Version 11, Revision 0
[ 341.988] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 341.988] Current Operating System: Linux egidio-arch 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 341.988] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3f7faf8f-4039-466e-b99d-34fa1c61b40f rw quiet
[ 341.990] Build Date: 29 December 2014 01:09:58PM
[ 341.990]
[ 341.991] Current version of pixman: 0.32.6
[ 341.992] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 341.992] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 341.995] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 3 02:59:24 2015
[ 341.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 341.996] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 341.996] (==) ServerLayout "layout"
[ 341.996] (**) |-->Screen "nvidia" (0)
[ 341.996] (**) | |-->Monitor "<default monitor>"
[ 341.996] (**) | |-->Device "nvidia"
[ 341.996] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 341.996] (**) |-->Inactive Device "intel"
[ 341.996] (==) Automatically adding devices
[ 341.996] (==) Automatically enabling devices
[ 341.996] (==) Automatically adding GPU devices
[ 342.039] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 342.039] Entry deleted from font path.
[ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 342.068] Entry deleted from font path.
[ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 342.068] Entry deleted from font path.
[ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 342.068] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 342.068] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 342.068] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 342.079] (II) Loader magic: 0x818d80
[ 342.079] (II) Module ABI versions:
[ 342.079] X.Org ANSI C Emulation: 0.4
[ 342.079] X.Org Video Driver: 18.0
[ 342.079] X.Org XInput driver : 21.0
[ 342.079] X.Org Server Extension : 8.0
[ 342.081] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 342.081] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 342.081] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[ 342.081] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 342.082] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 342.083] (--) PCI:*(0:0:2:0) 8086:0416:1043:129d rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 342.083] (--) PCI: (0:1:0:0) 10de:0fe4:1043:129d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 342.083] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 342.083] (II) LoadModule: "glx"
[ 342.123] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 342.678] (II) Module glx: vendor="NVIDIA Corporation"
[ 342.678] compiled for 4.0.2, module version = 1.0.0
[ 342.678] Module class: X.Org Server Extension
[ 342.685] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 342.689] (II) LoadModule: "nvidia"
[ 342.745] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 342.835] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 342.835] compiled for 4.0.2, module version = 1.0.0
[ 342.835] Module class: X.Org Video Driver
[ 342.846] (II) LoadModule: "modesetting"
[ 342.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 342.847] (II) Module modesetting: vendor="X.Org Foundation"
[ 342.847] compiled for 1.16.0, module version = 0.9.0
[ 342.847] Module class: X.Org Video Driver
[ 342.847] ABI class: X.Org Video Driver, version 18.0
[ 342.847] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 342.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 342.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 342.847] (++) using VT number 2
[ 342.847] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 342.855] (II) Loading sub module "fb"
[ 342.855] (II) LoadModule: "fb"
[ 342.855] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 342.872] (II) Module fb: vendor="X.Org Foundation"
[ 342.872] compiled for 1.16.3, module version = 1.0.0
[ 342.872] ABI class: X.Org ANSI C Emulation, version 0.4
[ 342.872] (II) Loading sub module "wfb"
[ 342.872] (II) LoadModule: "wfb"
[ 342.872] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 342.891] (II) Module wfb: vendor="X.Org Foundation"
[ 342.891] compiled for 1.16.3, module version = 1.0.0
[ 342.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 342.891] (II) Loading sub module "ramdac"
[ 342.891] (II) LoadModule: "ramdac"
[ 342.891] (II) Module "ramdac" already built-in
[ 342.905] (II) modesetting(1): using drv /dev/dri/card0
[ 342.905] (II) modesetting(G0): using drv /dev/dri/card0
[ 342.905] (EE) Screen 1 deleted because of no matching config section.
[ 342.905] (II) UnloadModule: "modesetting"
[ 342.905] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 342.905] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 342.905] (==) NVIDIA(0): RGB weight 888
[ 342.905] (==) NVIDIA(0): Default visual is TrueColor
[ 342.905] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 342.905] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 342.907] (**) NVIDIA(0): Enabling 2D acceleration
[ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 347.122] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 347.122] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 347.122] (EE) NVIDIA(GPU-0): README for additional information.
[ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 347.122] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 347.122] (II) UnloadModule: "nvidia"
[ 347.122] (II) UnloadSubModule: "wfb"
[ 347.122] (II) UnloadSubModule: "fb"
[ 347.122] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 347.122] (==) modesetting(G0): RGB weight 888
[ 347.122] (==) modesetting(G0): Default visual is TrueColor
[ 347.122] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 347.124] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[ 347.149] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 347.150] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 347.150] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 347.150] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[ 347.152] (II) modesetting(G0): EDID for output eDP-1-0
[ 347.152] (II) modesetting(G0): Manufacturer: CMO Model: 1720 Serial#: 0
[ 347.152] (II) modesetting(G0): Year: 2011 Week: 2
[ 347.152] (II) modesetting(G0): EDID Version: 1.4
[ 347.152] (II) modesetting(G0): Digital Display Input
[ 347.152] (II) modesetting(G0): 6 bits per channel
[ 347.152] (II) modesetting(G0): Digital interface is undefined
[ 347.152] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 347.152] (II) modesetting(G0): Gamma: 2.20
[ 347.152] (II) modesetting(G0): No DPMS capabilities specified
[ 347.152] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
[ 347.152] (II) modesetting(G0): First detailed timing is preferred mode
[ 347.152] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[ 347.152] (II) modesetting(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.610
[ 347.152] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 347.152] (II) modesetting(G0): Manufacturer's mask: 0
[ 347.152] (II) modesetting(G0): Supported detailed timing:
[ 347.152] (II) modesetting(G0): clock: 140.5 MHz Image Size: 382 x 215 mm
[ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1972 h_sync_end 2007 h_blank_end 2094 h_border: 0
[ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1118 v_border: 0
[ 347.152] (II) modesetting(G0): Supported detailed timing:
[ 347.152] (II) modesetting(G0): clock: 92.5 MHz Image Size: 382 x 215 mm
[ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 347.152] (II) modesetting(G0): HC9GK173HGE
[ 347.152] (II) modesetting(G0): Unknown vendor-specific block 0
[ 347.152] (II) modesetting(G0): EDID (in hex):
[ 347.152] (II) modesetting(G0): 00ffffffffffff000daf201700000000
[ 347.152] (II) modesetting(G0): 021501049026157802ed95a3544c9c26
[ 347.152] (II) modesetting(G0): 0f505400000001010101010101010101
[ 347.152] (II) modesetting(G0): 010101010101e13680ae703826403423
[ 347.152] (II) modesetting(G0): 36007ed71000001a1d2480a070381f40
[ 347.152] (II) modesetting(G0): 302035007ed71000001a000000fe0048
[ 347.152] (II) modesetting(G0): 4339474b803137334847450a00000000
[ 347.152] (II) modesetting(G0): 000041319e0000000002010a202000f3
[ 347.152] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 347.152] (II) modesetting(G0): Modeline "1920x1080"x60.0 140.49 1920 1972 2007 2094 1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
[ 347.152] (II) modesetting(G0): Modeline "1920x1080"x40.0 92.45 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
[ 347.152] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 347.152] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 347.176] (II) modesetting(G0): EDID for output VGA-1-0
[ 347.176] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 347.176] (II) modesetting(G0): EDID for output HDMI-1-0
[ 347.177] (II) modesetting(G0): EDID for output HDMI-1-1
[ 347.177] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 347.177] (==) modesetting(G0): DPI set to (96, 96)
[ 347.177] (II) Loading sub module "fb"
[ 347.177] (II) LoadModule: "fb"
[ 347.177] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 347.177] (II) Module fb: vendor="X.Org Foundation"
[ 347.177] compiled for 1.16.3, module version = 1.0.0
[ 347.177] ABI class: X.Org ANSI C Emulation, version 0.4
[ 347.177] (II) Loading sub module "shadow"
[ 347.177] (II) LoadModule: "shadow"
[ 347.177] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 347.183] (II) Module shadow: vendor="X.Org Foundation"
[ 347.183] compiled for 1.16.3, module version = 1.1.0
[ 347.183] ABI class: X.Org ANSI C Emulation, version 0.4
[ 347.183] (EE) Screen(s) found, but none have a usable configuration.
[ 347.183] (EE)
Fatal server error:
[ 347.183] (EE) no screens found(EE)
[ 347.183] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 347.183] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 347.183] (EE)
[ 347.189] (EE) Server terminated with error (1). Closing log file.
I'm using Gnome.
Can you please help me?
Last edited by Aegidius (2015-01-03 10:17:22)Here it is, but you will get to my same conclusion.
[egidio@egidio-arch ~]$ lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
Subsystem: Intel Corporation Device 2010
Flags: bus master, fast devsel, latency 0, IRQ 38
Memory at f7b14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, medium devsel, latency 0, IRQ 32
Memory at f7b00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, fast devsel, latency 0, IRQ 34
Memory at f7b1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f7b1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, fast devsel, latency 0, IRQ 37
Memory at f7b10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 29
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7900000-f79fffff
Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 30
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7800000-f78fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7b1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 33
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at f7b1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: medium devsel, IRQ 18
Memory at f7b19000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 129d
Flags: bus master, fast devsel, latency 0, IRQ 39
Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: AzureWave Device 2126
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f7a00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7a80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: ASUSTeK Computer Inc. Device 200f
Flags: bus master, fast devsel, latency 0, IRQ 35
I/O ports at d000 [size=256]
Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
Memory at f2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at f7800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
Last edited by Aegidius (2015-01-03 22:04:23) -
Xorg fails to restart with nvidia propertiary driver
Hi!
Dear fellow archers, I've got this little problem which is driving me crazy: after first successful start of xorg while booting ("kdm" is in the DAEMONS list in rc.conf), i can't get to start it once again (for example with "/etc/rc.d/kdm restart"). When I try to do this screen goes blank (+ single underscore in top-left corner) for ~10 seconds, then nvidia logo shows up for half a second, and finally it failbacks to terminal.
I use thinkpad T61 with nvidia quadro nvs 140m and nvidia driver version 190.42 (from extra repo).
Thanks in advance for all suggestions.
Xorg.0.log after I try to restart
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux hal9000 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/sda2 ro vga=869
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 13 16:10:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "Coolbits" "1"
(**) NVIDIA(0): Option "DPI" "96 x 96"
(**) NVIDIA(0): Option "DamageEvents" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) Dec 13 16:10:30 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 13 16:10:30 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 13 16:10:30 NVIDIA(0): enabled.
(II) Dec 13 16:10:43 NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86) at PCI:1:0:0 (GPU-0)
(--) Dec 13 16:10:43 NVIDIA(0): Memory: 524288 kBytes
(--) Dec 13 16:10:43 NVIDIA(0): VideoBIOS: 60.86.3e.00.00
(II) Dec 13 16:10:43 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 13 16:10:43 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 13 16:10:43 NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
(--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0)
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0)
(--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0): 400.0 MHz maximum pixel clock
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
(WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
(WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
(WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
(WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
(WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
(WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
(WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
(WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
(II) Dec 13 16:10:43 NVIDIA(0): Assigned Display Device: DFP-0
(II) Dec 13 16:10:43 NVIDIA(0): Validated modes:
(II) Dec 13 16:10:43 NVIDIA(0): "1440x900"
(II) Dec 13 16:10:43 NVIDIA(0): "1024x768"
(II) Dec 13 16:10:43 NVIDIA(0): "800x600"
(II) Dec 13 16:10:43 NVIDIA(0): "640x480"
(II) Dec 13 16:10:43 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(**) Dec 13 16:10:44 NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
(==) Dec 13 16:10:44 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Dec 13 16:10:44 NVIDIA(0): Initialized GPU GART.
(II) Dec 13 16:10:44 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Dec 13 16:10:44 NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) Dec 13 16:10:44 NVIDIA(0): Setting mode "1440x900"
(II) Loading extension NV-GLX
(II) Dec 13 16:10:45 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 13 16:10:45 NVIDIA(0): Initialized X Rendering Acceleration
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
#InputDevice "Ultranav" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "ServerFlags"
# Option "AutoAddDevices" "False"
#EndSection
#Section "Files"
# RgbPath "/usr/share/X11/rgb"
# ModulePath "/usr/lib/xorg/modules"
# FontPath "/usr/share/fonts/misc"
# FontPath "/usr/share/fonts/100dpi:unscaled"
# FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
#EndSection
Section "Module"
Load "glx"
Load "dri"
# Load "vbe"
# Load "ddc"
# Load "int10"
# Load "dbe"
# Load "extmod"
#Load "record"
# Load "freetype"
#Load "type1"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "thinkpad60"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "Auto"
# Option "XAxisMapping" "6 7"
# Option "YAxisMapping" "4 5"
Option "ZAxisMapping" "4 5 6 7"
# przewijanie srodkowym przyciskiem
# Option "EmulateWheel" "On"
# Option "Emulate3Buttons" "On"
# Option "EmulateWheelButton" "2"
## Option "EmulateWheelTimeout" "200"
EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "SHMConfig" "on"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "InputDevice"
Identifier "Ultranav"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Lenovo"
ModelName "Lenovo T61 Flat Panel 1440x900"
Option "DPMS"
# DisplaySize 487 304 # 75 DPI @ 1440x900
# DisplaySize 381 238 # 96 DPI @ 1440x900
# HorizSync 28.0 - 61.0
# VertRefresh 43.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Quadro NVS 140M"
Option "DPI" "96 x 96"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "DPMS" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "Coolbits" "1"
# Option "IgnoreDisplayDevices" "DFP, CRT, TV"
# BusID "PCI:1:0:0"
# Option "UseEdidDpi" "FALSE"
# Option "AddARGBGLXVisuals" "True"
# Option "AllowGLXWithComposite" "True"
# Option "TripleBuffer" "True"
# Option "DamageEvents" "True"
# Option "BackingStore" "True"
# Option "InitialPixmapPlacement" "3"
# Option "GlyphCache" "1"
# Option "PixmapCacheSize" "200000"
# on battery - max power saving, on AC - adaptive strategy
# Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2233; PowerMizerDefault=0x3"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
#Section "DRI"
#Mode 0666
#EndSection
Last edited by tarantoga (2009-12-13 15:36:59)tarantoga wrote:
falconindy wrote:
I don't think the 190 driver is intended for the quadro M series. As per the nvidia site, the 100 or 169 drivers support your video card.
edit: You might also try the nouveau driver.
Well, this quadro is almost identical to geforce 8400GS, so I don't think nvidia site is up to date in this respect. Besides, other than this issue everything works just fine. It is just annoying to be forced to reboot everytime I have to restart X. And I need nvidia propertiary driver, because I use opencl.
Thats odd then. I have an 8400gs and am using the beta driver without any issues. Give the legacy driver a try once.
Exit the gui (ctrl+alt+f1)
Remove the current driver
pacman -Rd nvidia nvidia-utils
(replace with nvidia-beta nvidia-utils-beta if you switched to the beta driver)
Now install the legacy driver
pacman -S nvidia-173xx nvidia-173xx-utils
Reboot
Hope this helps. -
[SOLVED] EDID read invalid with nvidia-313.18
Hello All,
after several months of trouble-free operation, my main system started having issues with detecting my second monitor properly. I am quite sure that this has something to do with the latest nvidia driver (313.18) but since I don't use this machine daily, I can't say exactly.
First, what's the problem? I have an nVidia GTX 460 card with two 26" TFTs @1920x1200 attached. No special configuration file has been necessary for some time now (everything detected automatically as needed). Now the main display (the left of two screens) is working as usual while the right one is limited to an 800x600 resolution. I've already tried several approaches to manually configure this one as intended but so far without success. nvidia-settings won't allow me to set any resolution other than Auto and is also weirdly showing the second display as DFP-3 whereas I think it used to be DFP-1 (following DFP-0 which is still active). A hardware issue can be eliminated as everything is smooth using an Ubuntu bootable CD which uses nouveau by default.
Here's the Xorg.0.log with a clean configuration (i. e. no /etc/X11/xorg.conf.d/10-monitor.conf)
[ 2.266]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 2.266] X Protocol Version 11, Revision 0
[ 2.266] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 2.266] Current Operating System: Linux einstein 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64
[ 2.266] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=edf8551b-5b2d-4942-af17-b2ebb09a6cb6 ro quiet init=/usr/lib/systemd/systemd
[ 2.266] Build Date: 25 January 2013 09:33:50AM
[ 2.266]
[ 2.266] Current version of pixman: 0.28.2
[ 2.266] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.266] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.266] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 9 11:29:34 2013
[ 2.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.269] (==) No Layout section. Using the first Screen section.
[ 2.269] (==) No screen section available. Using defaults.
[ 2.269] (**) |-->Screen "Default Screen Section" (0)
[ 2.269] (**) | |-->Monitor "<default monitor>"
[ 2.269] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.269] (==) Automatically adding devices
[ 2.269] (==) Automatically enabling devices
[ 2.269] (==) Automatically adding GPU devices
[ 2.270] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2.270] Entry deleted from font path.
[ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.271] Entry deleted from font path.
[ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.271] Entry deleted from font path.
[ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.271] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2.271] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.271] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.271] (II) Loader magic: 0x7fcc40
[ 2.271] (II) Module ABI versions:
[ 2.271] X.Org ANSI C Emulation: 0.4
[ 2.271] X.Org Video Driver: 13.1
[ 2.271] X.Org XInput driver : 18.0
[ 2.271] X.Org Server Extension : 7.0
[ 2.272] (--) PCI:*(0:1:0:0) 10de:0e22:19da:2166 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.272] Initializing built-in extension Generic Event Extension
[ 2.272] Initializing built-in extension SHAPE
[ 2.272] Initializing built-in extension MIT-SHM
[ 2.272] Initializing built-in extension XInputExtension
[ 2.272] Initializing built-in extension XTEST
[ 2.272] Initializing built-in extension BIG-REQUESTS
[ 2.272] Initializing built-in extension SYNC
[ 2.272] Initializing built-in extension XKEYBOARD
[ 2.272] Initializing built-in extension XC-MISC
[ 2.272] Initializing built-in extension SECURITY
[ 2.272] Initializing built-in extension XINERAMA
[ 2.272] Initializing built-in extension XFIXES
[ 2.272] Initializing built-in extension RENDER
[ 2.272] Initializing built-in extension RANDR
[ 2.272] Initializing built-in extension COMPOSITE
[ 2.272] Initializing built-in extension DAMAGE
[ 2.272] Initializing built-in extension MIT-SCREEN-SAVER
[ 2.272] Initializing built-in extension DOUBLE-BUFFER
[ 2.272] Initializing built-in extension RECORD
[ 2.272] Initializing built-in extension DPMS
[ 2.272] Initializing built-in extension X-Resource
[ 2.272] Initializing built-in extension XVideo
[ 2.272] Initializing built-in extension XVideo-MotionCompensation
[ 2.272] Initializing built-in extension XFree86-VidModeExtension
[ 2.272] Initializing built-in extension XFree86-DGA
[ 2.272] Initializing built-in extension XFree86-DRI
[ 2.272] Initializing built-in extension DRI2
[ 2.272] (II) LoadModule: "glx"
[ 2.273] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.346] (II) Module glx: vendor="NVIDIA Corporation"
[ 2.346] compiled for 4.0.2, module version = 1.0.0
[ 2.346] Module class: X.Org Server Extension
[ 2.346] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 2.346] Loading extension GLX
[ 2.346] (==) Matched nouveau as autoconfigured driver 0
[ 2.346] (==) Matched nvidia as autoconfigured driver 1
[ 2.346] (==) Matched nv as autoconfigured driver 2
[ 2.346] (==) Matched vesa as autoconfigured driver 3
[ 2.346] (==) Matched modesetting as autoconfigured driver 4
[ 2.346] (==) Matched fbdev as autoconfigured driver 5
[ 2.346] (==) Assigned the driver to the xf86ConfigLayout
[ 2.346] (II) LoadModule: "nouveau"
[ 2.347] (WW) Warning, couldn't open module nouveau
[ 2.347] (II) UnloadModule: "nouveau"
[ 2.347] (II) Unloading nouveau
[ 2.347] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 2.347] (II) LoadModule: "nvidia"
[ 2.347] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2.355] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2.355] compiled for 4.0.2, module version = 1.0.0
[ 2.355] Module class: X.Org Video Driver
[ 2.356] (II) LoadModule: "nv"
[ 2.356] (WW) Warning, couldn't open module nv
[ 2.356] (II) UnloadModule: "nv"
[ 2.356] (II) Unloading nv
[ 2.356] (EE) Failed to load module "nv" (module does not exist, 0)
[ 2.356] (II) LoadModule: "vesa"
[ 2.356] (WW) Warning, couldn't open module vesa
[ 2.356] (II) UnloadModule: "vesa"
[ 2.356] (II) Unloading vesa
[ 2.356] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2.356] (II) LoadModule: "modesetting"
[ 2.357] (WW) Warning, couldn't open module modesetting
[ 2.357] (II) UnloadModule: "modesetting"
[ 2.357] (II) Unloading modesetting
[ 2.357] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2.357] (II) LoadModule: "fbdev"
[ 2.357] (WW) Warning, couldn't open module fbdev
[ 2.357] (II) UnloadModule: "fbdev"
[ 2.357] (II) Unloading fbdev
[ 2.357] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.357] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 2.357] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2.357] (++) using VT number 1
[ 2.358] (II) Loading sub module "wfb"
[ 2.358] (II) LoadModule: "wfb"
[ 2.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2.359] (II) Module wfb: vendor="X.Org Foundation"
[ 2.359] compiled for 1.13.2, module version = 1.0.0
[ 2.359] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.359] (II) Loading sub module "ramdac"
[ 2.359] (II) LoadModule: "ramdac"
[ 2.359] (II) Module "ramdac" already built-in
[ 2.360] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.360] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2.360] (==) NVIDIA(0): RGB weight 888
[ 2.360] (==) NVIDIA(0): Default visual is TrueColor
[ 2.360] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.360] (**) NVIDIA(0): Enabling 2D acceleration
[ 3.170] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
[ 3.170] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 3.229] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
[ 3.229] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 3.229] (--) NVIDIA(GPU-0):
[ 3.229] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 3.229] (--) NVIDIA(GPU-0):
[ 3.229] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
[ 3.229] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
[ 3.229] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
[ 3.229] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
[ 3.229] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
[ 3.229] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
[ 3.229] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 3.229] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
[ 3.229] (--) NVIDIA(GPU-0):
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0):
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.229] (--) NVIDIA(GPU-0):
[ 3.230] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[ 3.230] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 3.230] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.a3
[ 3.230] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3.232] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
[ 3.232] (--) NVIDIA(0): CRT-0
[ 3.232] (--) NVIDIA(0): CRT-1
[ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0) (connected)
[ 3.232] (--) NVIDIA(0): DFP-1
[ 3.232] (--) NVIDIA(0): DFP-2
[ 3.232] (--) NVIDIA(0): DFP-3 (connected)
[ 3.232] (--) NVIDIA(0): DFP-4
[ 3.232] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): 330.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): Internal Dual Link TMDS
[ 3.232] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 3.232] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 3.232] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): DFP-3: Internal Dual Link TMDS
[ 3.232] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
[ 3.232] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 3.232] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.232] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
[ 3.232] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 3.233] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.233] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
[ 3.233] (**) NVIDIA(0): all display devices.)
[ 3.233] (==) NVIDIA(0):
[ 3.233] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3.233] (==) NVIDIA(0): will be used as the requested mode.
[ 3.233] (==) NVIDIA(0):
[ 3.233] (II) NVIDIA(0): Validated MetaModes:
[ 3.233] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 3.233] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1200
[ 3.261] (--) NVIDIA(0): DPI set to (88, 89); computed from "UseEdidDpi" X config
[ 3.261] (--) NVIDIA(0): option
[ 3.261] (--) Depth 24 pixmap format is 32 bpp
[ 3.261] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 3.261] (II) NVIDIA: access.
[ 3.265] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3.265] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3.265] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3.265] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3.265] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3.265] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3.265] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3.265] (II) NVIDIA(0): Config Options in the README.
[ 3.267] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 3.357] Loading extension NV-GLX
[ 3.452] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3.452] (==) NVIDIA(0): Backing store disabled
[ 3.452] (==) NVIDIA(0): Silken mouse enabled
[ 3.453] (==) NVIDIA(0): DPMS enabled
[ 3.453] Loading extension NV-CONTROL
[ 3.453] Loading extension XINERAMA
[ 3.453] (II) Loading sub module "dri2"
[ 3.453] (II) LoadModule: "dri2"
[ 3.453] (II) Module "dri2" already built-in
[ 3.453] (II) NVIDIA(0): [DRI2] Setup complete
[ 3.453] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 3.453] (--) RandR disabled
[ 3.456] (II) Initializing extension GLX
[ 3.502] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3.503] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.503] (II) LoadModule: "evdev"
[ 3.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.505] (II) Module evdev: vendor="X.Org Foundation"
[ 3.505] compiled for 1.13.0, module version = 2.7.3
[ 3.505] Module class: X.Org XInput Driver
[ 3.505] ABI class: X.Org XInput driver, version 18.0
[ 3.505] (II) Using input driver 'evdev' for 'Power Button'
[ 3.505] (**) Power Button: always reports core events
[ 3.505] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3.505] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.505] (--) evdev: Power Button: Found keys
[ 3.505] (II) evdev: Power Button: Configuring as keyboard
[ 3.505] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 3.505] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.505] (**) Option "xkb_rules" "evdev"
[ 3.505] (**) Option "xkb_model" "pc105"
[ 3.505] (**) Option "xkb_layout" "de"
[ 3.505] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.529] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.529] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.529] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.529] (II) Using input driver 'evdev' for 'Power Button'
[ 3.529] (**) Power Button: always reports core events
[ 3.529] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3.529] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.529] (--) evdev: Power Button: Found keys
[ 3.529] (II) evdev: Power Button: Configuring as keyboard
[ 3.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 3.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3.529] (**) Option "xkb_rules" "evdev"
[ 3.529] (**) Option "xkb_model" "pc105"
[ 3.529] (**) Option "xkb_layout" "de"
[ 3.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 3.530] (II) No input driver specified, ignoring this device.
[ 3.530] (II) This device may have been added with another device file.
[ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 3.530] (II) No input driver specified, ignoring this device.
[ 3.530] (II) This device may have been added with another device file.
[ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 3.531] (II) No input driver specified, ignoring this device.
[ 3.531] (II) This device may have been added with another device file.
[ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 3.531] (II) No input driver specified, ignoring this device.
[ 3.531] (II) This device may have been added with another device file.
[ 3.531] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
[ 3.531] (II) No input driver specified, ignoring this device.
[ 3.531] (II) This device may have been added with another device file.
[ 3.531] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
[ 3.531] (II) No input driver specified, ignoring this device.
[ 3.531] (II) This device may have been added with another device file.
[ 3.532] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 3.532] (II) No input driver specified, ignoring this device.
[ 3.532] (II) This device may have been added with another device file.
[ 3.532] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 3.532] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 3.532] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 3.532] (**) Logitech USB Receiver: always reports core events
[ 3.532] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 3.532] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
[ 3.532] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 3.532] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 3.532] (--) evdev: Logitech USB Receiver: Found relative axes
[ 3.532] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 3.532] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 3.532] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 3.532] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 3.532] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input7/event7"
[ 3.532] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 3.532] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 3.533] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 3.533] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 3.533] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 3.533] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 3.533] (II) No input driver specified, ignoring this device.
[ 3.533] (II) This device may have been added with another device file.
[ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 3.533] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 3.533] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 3.533] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 3.533] (**) Logitech USB Receiver: always reports core events
[ 3.533] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 3.534] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
[ 3.534] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 3.534] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 3.534] (--) evdev: Logitech USB Receiver: Found relative axes
[ 3.534] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 3.534] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 3.534] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 3.534] (--) evdev: Logitech USB Receiver: Found keys
[ 3.534] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 3.534] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 3.534] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 3.534] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 3.534] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input8/event8"
[ 3.534] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 3.534] (**) Option "xkb_rules" "evdev"
[ 3.534] (**) Option "xkb_model" "pc105"
[ 3.534] (**) Option "xkb_layout" "de"
[ 3.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.534] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 3.534] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 3.534] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 3.534] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 3.534] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 3.534] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 3.535] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event9)
[ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
[ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.535] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
[ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
[ 3.535] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event9"
[ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
[ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
[ 3.535] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
[ 3.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input9/event9"
[ 3.535] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 10)
[ 3.535] (**) Option "xkb_rules" "evdev"
[ 3.535] (**) Option "xkb_model" "pc105"
[ 3.535] (**) Option "xkb_layout" "de"
[ 3.535] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.536] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event10)
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.536] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
[ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event10"
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found 1 mouse buttons
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found scroll wheel(s)
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found relative axes
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute axes
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute multitouch axes
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found x and y absolute axes
[ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
[ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Forcing relative x/y axes to exist.
[ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as mouse
[ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
[ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Adding scrollwheel support
[ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: YAxisMapping: buttons 4 and 5
[ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input10/event10"
[ 3.536] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 11)
[ 3.536] (**) Option "xkb_rules" "evdev"
[ 3.536] (**) Option "xkb_model" "pc105"
[ 3.536] (**) Option "xkb_layout" "de"
[ 3.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: initialized for relative axes.
[ 3.536] (WW) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: ignoring absolute axes.
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) keeping acceleration scheme 1
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration profile 0
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration factor: 2.000
[ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration threshold: 4
[ 3.537] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/js0)
[ 3.537] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
[ 3.537] (II) No input driver specified, ignoring this device.
[ 3.537] (II) This device may have been added with another device file.
[ 3.537] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
[ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3.537] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 3.537] (**) Eee PC WMI hotkeys: always reports core events
[ 3.537] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
[ 3.537] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 3.537] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 3.537] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 3.537] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event6"
[ 3.537] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 3.537] (**) Option "xkb_rules" "evdev"
[ 3.537] (**) Option "xkb_model" "pc105"
[ 3.537] (**) Option "xkb_layout" "de"
[ 3.537] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 3.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 3.538] (II) No input driver specified, ignoring this device.
[ 3.538] (II) This device may have been added with another device file.
[ 3.542] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
[ 3.542] (II) No input driver specified, ignoring this device.
[ 3.542] (II) This device may have been added with another device file.
[ 3.542] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 3.542] (II) No input driver specified, ignoring this device.
[ 3.542] (II) This device may have been added with another device file.
[ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
[ 3.543] (II) No input driver specified, ignoring this device.
[ 3.543] (II) This device may have been added with another device file.
[ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 3.543] (II) No input driver specified, ignoring this device.
[ 3.543] (II) This device may have been added with another device file.
[ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 3.543] (II) No input driver specified, ignoring this device.
[ 3.543] (II) This device may have been added with another device file.
[ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 3.543] (II) No input driver specified, ignoring this device.
[ 3.543] (II) This device may have been added with another device file.
[ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 3.543] (II) No input driver specified, ignoring this device.
[ 3.543] (II) This device may have been added with another device file.
[ 3.620] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
[ 3.620] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 3.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.620] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
[ 3.620] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 3.679] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
[ 3.679] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 3.679] (--) NVIDIA(GPU-0):
[ 3.679] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 3.679] (--) NVIDIA(GPU-0):
[ 3.679] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
[ 3.679] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
[ 3.679] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
[ 3.679] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
[ 3.679] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
[ 3.679] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
[ 3.679] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 3.679] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
[ 3.680] (--) NVIDIA(GPU-0):
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0):
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.680] (--) NVIDIA(GPU-0):
[ 3.680] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.680] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
[ 3.680] (**) NVIDIA(0): all display devices.)
[ 4.259] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
[ 4.259] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 4.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4.259] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
[ 4.259] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 4.319] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
[ 4.319] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 4.319] (--) NVIDIA(GPU-0):
[ 4.319] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 4.319] (--) NVIDIA(GPU-0):
[ 4.319] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
[ 4.319] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
[ 4.319] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
[ 4.319] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
[ 4.319] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
[ 4.319] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
[ 4.319] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 4.319] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
[ 4.319] (--) NVIDIA(GPU-0):
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0):
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.319] (--) NVIDIA(GPU-0):
[ 4.319] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4.319] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
[ 4.319] (**) NVIDIA(0): all display devices.)
[ 16.599] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
[ 16.599] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 16.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.599] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
[ 16.599] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 16.659] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
[ 16.659] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 16.659] (--) NVIDIA(GPU-0):
[ 16.659] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 16.659] (--) NVIDIA(GPU-0):
[ 16.659] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
[ 16.659] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
[ 16.659] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
[ 16.659] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
[ 16.659] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
[ 16.659] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
[ 16.659] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 16.659] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
[ 16.659] (--) NVIDIA(GPU-0):
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0):
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.659] (--) NVIDIA(GPU-0):
[ 16.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.659] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
[ 16.659] (**) NVIDIA(0): all display devices.)
[ 17.393] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
[ 17.393] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 17.393] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.393] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
[ 17.393] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 17.453] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
[ 17.453] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 17.453] (--) NVIDIA(GPU-0):
[ 17.453] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 17.453] (--) NVIDIA(GPU-0):
[ 17.453] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
[ 17.453] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
[ 17.453] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
[ 17.453] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
[ 17.453] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
[ 17.453] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
[ 17.453] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 17.453] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
[ 17.453] (--) NVIDIA(GPU-0):
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0):
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.453] (--) NVIDIA(GPU-0):
[ 17.453] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.453] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
[ 17.453] (**) NVIDIA(0): all display devices.)
As you can see, the EDID information cannot be obtained from the second display. Since I haven't found any indication of this being a bug in the latest nVidia driver, I wanted to ask whether you have come across any hints or explanations.
For the time being, I can live with it but I'm actually considering moving to nouveau instead now.
Thanks for your time. Cheers
Smoerrebroed
Last edited by Smoerrebroed (2013-05-04 11:34:32)Alright, though it still bothers me that for some reason the nvidia driver no longer correctly reads and processes EDID information on all connectors, supplying DFP-0's EDID to DFP-3 via the "CustomEDID" option fixed all woes. 1920x1200 is now again detected as default, TwinView is enabled and so on ... even without a sophisticated 10-monitor.conf:
Section "Device"
Identifier "GeForce GTX 460"
Driver "nvidia"
Option "CustomEDID" "DFP-3:/etc/X11/xorg.conf.d/edid.bin"
EndSection
Everything else remains at default and works. Perhaps this post will also help others in dealing with nvidia issues.
One thing this has taught me though is: As much inclined as I am towards open source software, the nouveau driver is really still a long way off the performance of the proprietary nvidia module. If you want/need to work seriously in 3D, there's no alternative.
Cheers
Smoerrebroed
Last edited by Smoerrebroed (2013-05-31 19:36:45) -
Problem with NVidia Quadro FX 4000 on MSI K8T Master2-Far
Hello everyone, I am new to the forums here. I cannot figure out what is causing my problem.
I have been having performance issues with my new Quadro FX 4000 on my system. I have been in communication with Nvidia tech support for a while now. Here is the discussion I have been having with them. It explains my problem in detail. Be sure to read it from bottom to top though.
*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks.
Response (GL)
Pat,
I have checked the NVBug Database and although there has been Bugs submitted where a MSI Master2-Far motherboard was used, none of the issues were caused by the motherboard. They just happened to have a MSI Master2-Far motherboard.
We have seen conflicts when both ATI and NVIDIA drivers are both installed, but I would hope that the Driver Cleaner software removed the lines in the registry as well.
Did you try the FX4000 in the other system (the one that had the MX 440) ?
I believe you are taking to right steps in resolving this issue.
Looking at the Windows Error Reporting, it seems you have had some app problems.
Looking forward in hearing your results
Best regards,
NVIDIA Customer Care.
Customer (Pat Miller) 02/07/2007 12:19 AM
OK I completed my tests and got some interesting results.
-I installed the GeForce Mx 440 on my computer and it yielded similar poor performance just like the Quadro did (terrible window scrolling, stuttering, horrible gaming).
-I then installed the Quadro on the computer I yanked the Geforce MX 440 from. I installed the most recent drivers, and it worked WONDERFULLY. There was no stuttering, no lagging, and Open GL gaming seemed even better than the MX 440 (I know the Quadro is not designed for gaming, but some Open GL counter-strike served as a nice little test.) Unfortunately, that computer does not have Adobe Premiere or any high-end applications for me to really test the card with.
-After those two tests, I uninstalled the MX 440 from my computer and re-installed its ORIGINAL ATI 9600 SE. It worked just like it did before I first received the Quadro. No window lagging, no stuttering, and adequate gaming.
All of these test yield a few conclusions to me:
1. The Quadro FX 4000 card is not defective, it does indeed work.
2. My computer seems to dislike Nvidia cards and/or drivers (seeing as the Quadro and GeForce gave me terrible results while the ATI worked fine.)
It would seem to be a driver issue, almost like my original ATI driver files are still running. That would explain everything. However, I completely removed the ATI driver AND ran Driver Cleaner to clear all ATI files from my system before attempting to install the Nvidia card.
I cannot think of a reason for these inconsistencies. Tomorrow I plan on preparing to completely crash my computer. Backup my files and completely format my HD's and reinstalled Windows XP Pro, my Mobo software, all drivers, ect.
I will await any ideas or suggestions before I format my computer. I hope these tests along with my system info helps. Thank you very much.
Customer (Pat Miller) 02/06/2007 07:51 PM
Ok,
Here is my system info. I realize that the Quadro FX 4000 has a conflicting IRQ with my onboard gigabyte ethernet, but my old ATI card was the same way, and it never caused a problem. Also, I am unsure how to fix that anyways. Hopefully this info helps us determine the problem.
I am going to try a few tests of my own. I am going to install a GeForce MX 440 AGP card(from my other computer) and see how it performs. Then I will try re-installing my old ATI 9600SE card. If I get similar low performance, than it must be something else besides the card. Otherwise, the card is the issue.
Thanks for the help.
Response (GL) 02/06/2007 12:15 PM
Pat,
Maybe the system info will shed some light.
Please perform the following steps:
1) Click on the Start button
2) Select Run
3) In the Open field, type in "msinfo32" and then press the OK button
4) This will bring up the Microsoft System Information Utility.
Click on File and then Save to save this information to your hard drive. You may give it any name you choose.
5) Once the file has been saved on your hard drive, attach it to this support request so that we may review your system configuration.
Looking forward for your response.
Best regards,
NVIDIA Customer Care.
Customer (Pat Miller) 02/02/2007 05:19 PM
I completely uninstalled my old ATI and Nvidia drivers. I went into safe mode and ran Driver Cleaner also. I freshly installed the new Nvidia driver and I still have low performance.
I am trying to download Viewperf, but it is downloading at about 30k/s, which will take about a day to finish. What else could be causing this? It is possible its a bad card? I got it new on Ebay from a legitimate seller, but it came with the card only.
Response (GL) 02/01/2007 06:00 PM
Thank you for contacting NVIDIA Customer Care
There should not be any performance drop browsing the internet or moving windows across screens.
Since you did have an ATI card installed, you may want to verify that all files have been removed.
This also includes the registry since there are applications known to leave files behind.
Once all ATI files have been removed, please run a benchmark software such as ViewPerf.
Viewperf 9.03 can be found on the following location:
http://www.spec.org/gpc/downloadindex.html
Best regards
NVIDIA Customer Care
Customer (Pat Miller) 02/01/2007 01:35 PM
I recently upgraded to a Quadro FX 4000. I do a lot of video editing on Premiere, and from what I read, it seemed like the best card to get. However, I am getting very poor performance with this card. For example, just browing the internet and moving windows around yields a very stuttery picture. And I do not notice any different using Premiere.
I uninstalled my old video card (ATI 9600 SE) and uninstalled the drivers for it as well.
I have tried 3 different versions of drivers for the Quadro 4000, including the most recent.
I have checked the power connections, and the card is receiving power on both the ports.
I really have no idea what could be causing this bad performance. Is this how the card works? Did my ATI 9600SE yield better performance for internet browsing than this card does? The only thing I can think of is that the card is not getting enough power because it connects to 2 seperate power cables from the PSU which already power lots of other things (HD's, Disk Drives, Fans).
Any help is greatly appreciated. Here at my system specs:
Custom built PC
MSI Master2-Far Mobo
2x AMD Opteron 244
2G Transcend DDR 333 Registered Ram(1 stick)
2x WD 74G Raptors (RAID 0)
1x Maxtor 250G
2x DVD burner
1x DVD Rom
Quadro FX 4000 AGP
*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks.Hi there, welcome to forum.
"*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks."
your PSU is good one and should be powerfull enough.
Output +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
let we know how its going, if problem persist we a ready with a tips to resolve your issue. -
Hello,
I'm using a Sony VAIO-VGNFE41Z notebook with the NVIDIA GeForce Go 7600 graphics card. Approximately four days ago the card started to display artifacts on the screen even before the appearance of the VAIO logo during the BIOS initialization process. These artifacts look like green dotted squares, blue randomly placed rectangles and vertical green dotted lines. Since these artifacts appear even before grub takes over the boot process, I really think that this is a hardware issue.
After the appearance of these artifacts the X server doesn't start up but I still have access to the text console and "nvidia-debugdump -l" displays the following:
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
Error: nvmlInit(): Driver Not Loaded
What bothers me however is the fact that I've been using Archlinux on my notebook for approximately one year and before that I used Windows XP for approximately seven years. So my question is whether or not it is possible that the proprietary NVIDIA drivers somehow slowly "destroyed" the graphics card perhaps due to incorrect temperature readings? This is the installation history for these proprietary drivers:
[2014-05-29 11:03] [PACMAN] Running 'pacman -S nvidia-304xx'
[2014-05-29 11:03] [PACMAN] installed nvidia-304xx-utils (304.121-2)
[2014-05-29 11:03] [PACMAN] installed nvidia-304xx-libgl (304.121-2)
[2014-05-29 11:04] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
[2014-05-29 11:04] [PACMAN] installed nvidia-304xx (304.121-3)
[2014-05-29 11:05] [PACMAN] Running 'pacman -S gtk2 opencl-nvidia-304xx'
[2014-05-29 11:06] [PACMAN] installed opencl-nvidia-304xx (304.121-2)
[2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2014-06-03 14:30] [PACMAN] Running 'pacman -Sc nvidia-utils'
[2014-06-18 20:19] [PACMAN] upgraded nvidia-304xx (304.121-3 -> 304.121-5)
[2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-utils (304.121-2 -> 304.121-3)
[2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-libgl (304.121-2 -> 304.121-3)
[2014-06-29 21:42] [PACMAN] upgraded opencl-nvidia-304xx (304.121-2 -> 304.121-3)
[2014-07-03 19:43] [PACMAN] upgraded nvidia-304xx (304.121-5 -> 304.121-6)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-utils (304.121-3 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-libgl (304.121-3 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx (304.121-6 -> 304.123-1)
[2014-07-13 19:27] [PACMAN] upgraded opencl-nvidia-304xx (304.121-3 -> 304.123-1)
[2014-07-29 14:10] [PACMAN] upgraded nvidia-304xx (304.123-1 -> 304.123-2)
[2014-07-29 21:56] [PACMAN] upgraded nvidia-304xx (304.123-2 -> 304.123-3)
[2014-07-30 11:35] [PACMAN] upgraded nvidia-304xx (304.123-3 -> 304.123-4)
[2014-08-13 12:21] [PACMAN] upgraded nvidia-304xx (304.123-4 -> 304.123-5)
[2014-09-18 19:12] [PACMAN] upgraded nvidia-304xx (304.123-5 -> 304.123-6)
[2014-10-06 20:18] [PACMAN] upgraded nvidia-304xx (304.123-6 -> 304.123-7)
[2014-10-23 13:10] [PACMAN] upgraded nvidia-304xx (304.123-7 -> 304.123-9)
[2014-11-26 20:17] [PACMAN] upgraded nvidia-304xx (304.123-9 -> 304.123-10)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-utils (304.123-1 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-libgl (304.123-1 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx (304.123-10 -> 304.125-1)
[2014-12-05 20:41] [PACMAN] upgraded opencl-nvidia-304xx (304.123-1 -> 304.125-1)
[2014-12-11 21:30] [PACMAN] upgraded nvidia-304xx (304.125-1 -> 304.125-2)
[2015-01-15 15:06] [ALPM] upgraded nvidia-304xx (304.125-2 -> 304.125-6)
[2015-02-06 14:47] [ALPM] upgraded nvidia-304xx (304.125-6 -> 304.125-8)
[2015-02-08 14:09] [ALPM] upgraded nvidia-304xx (304.125-8 -> 304.125-9)
[2015-03-19 16:28] [ALPM] upgraded nvidia-304xx (304.125-9 -> 304.125-13)
[2015-04-07 10:12] [ALPM] upgraded nvidia-304xx (304.125-13 -> 304.125-14)
Is it possible that the last update on 2015-04-07 somehow messed up the graphics card? Although I find it weird, because the problems didn't appear until 2015-04-10. Nevertheless the temperature readings don't seem to work. Here's the result of nvidia-smi:
==============NVSMI LOG==============
Timestamp : Mon Apr 13 17:34:42 2015
Driver Version : 304.125
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : GeForce Go 7600
Display Mode : N/A
Persistence Mode : N/A
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : N/A
VBIOS Version : 05.73.22.47.04
Inforom Version
Image Version : N/A
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x039810DE
Bus Id : 0000:01:00.0
Sub System Id : 0x81EF104D
GPU Link Info
PCIe Generation
Max : N/A
Current : N/A
Link Width
Max : N/A
Current : N/A
Fan Speed : N/A
Performance State : N/A
Clocks Throttle Reasons : N/A
Memory Usage
Total : 121 MB
Used : 0 MB
Free : 121 MB
Compute Mode : N/A
Utilization
Gpu : N/A
Memory : N/A
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Total : N/A
Temperature
Gpu : N/A
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Default Power Limit : N/A
Min Power Limit : N/A
Max Power Limit : N/A
Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : N/A
SM : N/A
Memory : N/A
Compute Processes : N/A
The temperature for the GPU isn't shown. However I don't know, whether or not it's supposed to be this way for the GO 7600 graphics card. Here are the details of an lspci call:
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation Device 81ef
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Today the screen suddenly went dark and it became impossible to switch off the laptop. I had to pull (and then insert) the power cable and restart the system. Here's the output of Xorg.0.log.old, journalctl:
[ 5302.217] (EE) NVIDIA(0): Error recovery failed.
[ 5302.217] (EE) NVIDIA(0): *** Aborting ***
[ 5302.217] (EE)
Fatal server error:
[ 5302.217] (EE) Failed to recover from error!
[ 5302.217] (EE)
[ 5302.217] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5302.217] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5302.217] (EE)
[ 5305.218] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x00001288)
[ 5312.217] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x00001288)
[ 5315.225] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012bc)
[ 5322.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012bc)
[ 5325.226] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012d8)
[ 5332.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012d8)
[ 5335.227] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001304)
[ 5342.227] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001304)
[ 5345.228] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001328)
[ 5352.228] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001328)
[ 5355.229] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000134c)
[ 5362.229] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000134c)
[ 5365.230] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001370)
[ 5372.230] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001370)
[ 5375.231] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001394)
[ 5382.231] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001394)
[ 5385.232] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013b8)
[ 5392.232] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013b8)
[ 5395.233] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013dc)
[ 5402.233] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013dc)
[ 5405.234] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001400)
[ 5412.234] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001400)
[ 5415.235] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001424)
[ 5422.235] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001424)
[ 5425.236] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001448)
[ 5432.236] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001448)
[ 5435.237] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000146c)
[ 5442.237] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000146c)
[ 5445.238] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001490)
[ 5452.238] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001490)
[ 5455.239] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014b4)
[ 5462.239] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014b4)
[ 5465.240] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014d8)
[ 5472.240] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014d8)
[ 5475.241] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014fc)
[ 5482.241] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014fc)
[ 5485.242] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001520)
[ 5492.242] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001520)
[ 5495.243] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001544)
[ 5502.243] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001544)
[ 5505.244] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001568)
[ 5512.244] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001568)
[ 5515.245] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000158c)
[ 5522.245] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000158c)
[ 5525.246] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015b0)
[ 5532.246] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015b0)
[ 5535.247] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015d4)
[ 5542.247] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015d4)
[ 5545.248] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015f8)
[ 5552.248] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015f8)
[ 5555.249] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000161c)
[ 5562.249] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000161c)
[ 5565.250] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001640)
[ 5572.250] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001640)
[ 5575.251] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001664)
[ 5582.251] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001664)
[ 5585.252] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001688)
[ 5592.252] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001688)
[ 5595.253] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016ac)
[ 5602.253] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016ac)
[ 5605.254] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016d0)
[ 5612.254] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016d0)
[ 5615.255] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016f4)
[ 5622.255] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016f4)
[ 5625.256] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001718)
[ 5632.256] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001718)
[ 5635.257] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000173c)
[ 5642.257] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000173c)
[ 5645.258] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001760)
[ 5652.258] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001760)
[ 5655.259] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001784)
[ 5662.259] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001784)
[ 5665.260] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017a8)
[ 5672.260] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017a8)
[ 5675.261] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017cc)
[ 5682.261] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017cc)
[ 5685.262] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017f0)
[ 5692.262] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017f0)
[ 5695.263] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001814)
[ 5702.263] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001814)
[ 5705.264] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001838)
[ 5712.264] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001838)
[ 5715.265] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000185c)
[ 5722.265] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000185c)
[ 5725.266] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001880)
[ 5732.266] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001880)
[ 5735.267] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018a4)
[ 5742.267] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018a4)
[ 5745.268] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018c8)
[ 5752.268] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018c8)
[ 5755.269] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018ec)
[ 5762.269] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018ec)
[ 5765.270] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001910)
[ 5772.270] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001910)
[ 5775.271] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001934)
[ 5782.271] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001934)
[ 5785.272] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001958)
[ 5792.272] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001958)
[ 5795.273] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000197c)
[ 5802.273] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000197c)
[ 5805.274] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019a0)
[ 5812.274] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019a0)
[ 5815.275] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019c4)
[ 5822.275] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019c4)
[ 5825.276] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019e8)
[ 5832.276] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019e8)
[ 5835.277] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a0c)
[ 5842.277] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a0c)
[ 5845.278] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a30)
[ 5852.278] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a30)
[ 5855.279] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a54)
[ 5862.279] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a54)
[ 5865.280] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a78)
[ 5872.280] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a78)
[ 5875.281] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a9c)
[ 5882.281] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a9c)
[ 5885.282] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ac0)
[ 5892.282] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ac0)
[ 5895.283] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ae4)
[ 5902.283] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ae4)
[ 5905.284] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b08)
[ 5912.284] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b08)
[ 5915.285] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b2c)
[ 5922.285] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b2c)
[ 5925.286] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b50)
[ 5932.286] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b50)
[ 5935.287] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b74)
[ 5942.287] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b74)
[ 5945.288] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b98)
[ 5952.288] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b98)
[ 5955.289] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001bbc)
[ 5962.289] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001bbc)
[ 5965.290] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001be0)
[ 5972.290] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001be0)
[ 5975.291] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c04)
[ 5982.291] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c04)
[ 5985.292] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c28)
[ 5992.292] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c28)
[ 5995.293] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c4c)
[ 6002.293] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c4c)
[ 6005.294] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c70)
[ 6012.294] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c70)
[ 6015.295] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c94)
[ 6022.295] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c94)
[ 6025.296] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cb8)
[ 6032.296] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cb8)
[ 6035.297] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cdc)
[ 6042.297] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cdc)
[ 6045.298] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d00)
[ 6052.298] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d00)
[ 6055.299] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d24)
[ 6062.299] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d24)
[ 6065.300] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d48)
[ 6072.300] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d48)
[ 6075.301] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d6c)
[ 6082.301] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d6c)
[ 6085.302] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d90)
[ 6092.302] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d90)
[ 6095.303] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001db4)
[ 6102.303] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001db4)
[ 6105.304] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dd8)
[ 6112.304] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dd8)
[ 6115.305] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dfc)
[ 6122.305] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dfc)
[ 6125.306] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e20)
[ 6132.306] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e20)
[ 6135.307] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e44)
[ 6142.307] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e44)
[ 6145.308] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e68)
[ 6152.308] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e68)
[ 6155.309] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e8c)
[ 6162.309] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e8c)
[ 6165.310] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001eb0)
[ 6172.310] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001eb0)
[ 6175.311] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ed4)
[ 6182.311] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ed4)
[ 6185.312] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ef8)
[ 6192.312] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ef8)
[ 6195.313] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f1c)
[ 6202.313] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f1c)
[ 6205.314] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f40)
[ 6212.314] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f40)
[ 6215.315] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f64)
[ 6222.315] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f64)
[ 6225.316] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f88)
[ 6232.316] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f88)
[ 6235.317] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fac)
[ 6242.317] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fac)
[ 6245.318] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fd0)
[ 6252.318] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fd0)
[ 6255.319] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ff4)
[ 6262.319] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ff4)
[ 6265.320] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002018)
[ 6272.320] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002018)
[ 6275.321] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000203c)
[ 6282.321] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000203c)
[ 6285.322] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002060)
[ 6292.322] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002060)
[ 6295.323] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002084)
[ 6302.323] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002084)
[ 6305.324] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020a8)
[ 6312.324] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020a8)
[ 6315.325] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020cc)
[ 6322.325] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020cc)
[ 6325.326] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020f0)
[ 6332.326] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020f0)
[ 6335.327] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002114)
[ 6342.327] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002114)
[ 6345.328] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002138)
[ 6352.328] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002138)
[ 6355.329] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000215c)
[ 6362.329] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000215c)
[ 6365.330] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002180)
[ 6372.330] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002180)
[ 6375.331] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021a4)
[ 6382.331] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021a4)
[ 6385.332] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021c8)
[ 6392.332] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021c8)
[ 6395.333] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021ec)
[ 6402.333] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021ec)
[ 6405.334] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002210)
[ 6412.334] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002210)
[ 6415.335] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002234)
[ 6422.335] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002234)
[ 6425.336] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002258)
[ 6432.336] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002258)
[ 6435.337] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000227c)
[ 6442.337] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000227c)
[ 6445.338] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022a0)
[ 6452.338] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022a0)
[ 6455.339] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022c4)
[ 6462.339] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022c4)
[ 6465.340] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022e8)
[ 6472.340] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022e8)
[ 6475.341] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000230c)
[ 6482.341] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000230c)
[ 6485.342] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002330)
[ 6492.342] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002330)
[ 6495.343] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002354)
[ 6502.343] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002354)
[ 6505.344] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002378)
[ 6512.344] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002378)
[ 6515.345] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000239c)
[ 6522.345] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000239c)
[ 6525.346] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023c0)
[ 6532.346] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023c0)
[ 6535.347] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023e4)
[ 6542.347] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023e4)
[ 6545.348] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002408)
[ 6552.348] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002408)
[ 6555.349] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000242c)
[ 6562.349] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000242c)
[ 6565.350] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002450)
[ 6572.350] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002450)
[ 6575.351] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002474)
[ 6582.351] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002474)
[ 6585.352] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002498)
[ 6592.352] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002498)
[ 6595.353] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024bc)
[ 6602.353] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024bc)
[ 6605.354] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024e0)
[ 6612.354] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024e0)
[ 6615.355] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002504)
[ 6622.355] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002504)
[ 6625.356] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002528)
[ 6632.356] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002528)
[ 6635.357] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000254c)
[ 6642.357] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000254c)
[ 6645.358] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002570)
[ 6652.358] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002570)
[ 6655.359] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002594)
[ 6662.359] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002594)
[ 6665.360] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025b8)
[ 6672.360] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025b8)
[ 6675.361] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025dc)
[ 6682.361] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025dc)
[ 6685.362] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002600)
[ 6692.362] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002600)
[ 6695.363] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002624)
[ 6702.363] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002624)
[ 6705.364] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002648)
[ 6712.364] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002648)
[ 6715.365] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000266c)
[ 6722.365] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000266c)
[ 6725.366] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002690)
[ 6732.367] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002690)
[ 6735.367] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026b4)
[ 6742.368] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026b4)
[ 6745.368] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026d8)
[ 6752.369] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026d8)
[ 6755.369] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026fc)
[ 6762.370] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026fc)
[ 6765.370] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002720)
[ 6772.371] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002720)
[ 6775.371] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002744)
[ 6782.372] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002744)
[ 6785.372] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002768)
[ 6792.373] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002768)
[ 6795.373] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000278c)
[ 6802.374] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000278c)
[ 6805.374] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027b0)
[ 6812.375] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027b0)
[ 6815.375] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027d4)
[ 6822.376] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027d4)
[ 6825.376] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027f8)
[ 6832.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027f8)
[ 6835.377] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000281c)
[ 6842.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000281c)
[ 6845.378] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002840)
[ 6852.379] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002840)
[ 6855.379] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002864)
[ 6862.380] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002864)
[ 6865.380] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002888)
[ 6872.381] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002888)
[ 6875.381] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028ac)
[ 6882.382] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028ac)
[ 6885.382] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028d0)
[ 6892.383] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028d0)
[ 6895.383] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028f4)
[ 6902.384] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028f4)
[ 6905.384] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002918)
[ 6912.385] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002918)
[ 6915.385] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000293c)
[ 6922.386] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000293c)
[ 6925.386] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002960)
[ 6932.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002960)
[ 6935.387] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002984)
[ 6942.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002984)
[ 6945.388] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029a8)
[ 6952.388] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029a8)
[ 6955.389] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029cc)
[ 6962.389] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029cc)
[ 6965.390] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029f0)
[ 6972.390] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029f0)
[ 6975.391] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a14)
[ 6982.391] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a14)
[ 6985.392] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a38)
[ 6992.392] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a38)
[ 6995.393] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a5c)
[ 7002.394] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a5c)
[ 7005.394] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a80)
[ 7012.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a80)
[ 7015.395] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aa4)
[ 7022.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aa4)
[ 7025.396] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ac8)
[ 7032.396] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ac8)
[ 7035.397] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aec)
[ 7042.397] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aec)
[ 7045.398] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b10)
[ 7052.398] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b10)
[ 7055.399] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b34)
[ 7062.399] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b34)
[ 7065.400] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b58)
[ 7072.400] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b58)
[ 7075.401] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b7c)
[ 7082.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b7c)
[ 7085.402] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ba0)
[ 7092.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ba0)
[ 7095.403] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002bc4)
[ 7102.403] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002bc4)
[ 7105.404] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002be8)
[ 7112.404] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002be8)
[ 7115.405] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c0c)
[ 7122.405] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c0c)
[ 7125.406] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c30)
[ 7132.406] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c30)
[ 7135.407] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c54)
[ 7142.407] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c54)
[ 7145.408] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c78)
[ 7152.408] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c78)
[ 7155.409] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c9c)
[ 7162.409] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c9c)
[ 7165.410] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002cc0)
[ 7172.410] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002cc0)
[ 7175.411] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ce4)
[ 7182.411] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ce4)
[ 7185.412] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d08)
[ 7192.412] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d08)
[ 7195.413] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d2c)
[ 7202.413] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d2c)
[ 7205.414] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d50)
[ 7212.414] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d50)
[ 7215.415] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d74)
[ 7222.415] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d74)
[ 7225.416] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d98)
[ 7232.416] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d98)
[ 7235.417] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002dbc)
[ 7242.417] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002dbc)
[ 7245.418] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002de0)
[ 7252.418] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002de0)
[ 7255.419] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e04)
[ 7262.419] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e04)
[ 7265.420] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e28)
[ 7272.420] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e28)
[ 7275.421] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e4c)
[ 7282.421] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e4c)
[ 7285.422] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e70)
[ 7292.422] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e70)
[ 7295.423] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e94)
[ 7302.423] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e94)
[ 7305.424] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002eb8)
[ 7312.424] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002eb8)
[ 7315.425] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002edc)
[ 7322.425] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002edc)
[ 7325.426] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f00)
[ 7332.426] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f00)
[ 7335.427] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f24)
[ 7342.427] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f24)
[ 7345.428] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f48)
[ 7352.428] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f48)
[ 7355.429] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f6c)
[ 7362.429] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f6c)
[ 7365.430] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f90)
[ 7372.430] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f90)
[ 7375.431] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fb4)
[ 7382.431] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fb4)
[ 7385.432] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fd8)
[ 7392.432] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fd8)
[ 7395.433] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ffc)
[ 7402.433] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ffc)
[ 7405.434] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003020)
[ 7412.434] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003020)
[ 7415.435] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003044)
[ 7422.435] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003044)
[ 7425.436] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003068)
[ 7432.436] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003068)
[ 7435.437] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000308c)
[ 7442.437] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000308c)
[ 7445.438] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030b0)
[ 7452.438] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030b0)
[ 7455.439] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030d4)
[ 7462.439] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030d4)
[ 7465.440] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030f8)
[ 7472.440] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030f8)
[ 7475.441] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000311c)
[ 7482.441] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000311c)
[ 7485.442] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003140)
[ 7492.442] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003140)
[ 7495.443] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003164)
[ 7502.443] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003164)
[ 7505.444] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003188)
[ 7512.444] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003188)
[ 7515.445] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031ac)
[ 7522.445] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031ac)
[ 7525.446] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031d0)
[ 7532.446] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031d0)
[ 7535.447] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031f4)
[ 7542.447] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031f4)
[ 7545.448] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003218)
[ 7552.448] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003218)
[ 7555.449] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000323c)
[ 7562.449] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000323c)
[ 7565.450] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003260)
[ 7572.450] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003260)
[ 7575.451] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003284)
[ 7582.451] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003284)
[ 7585.452] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032a8)
[ 7592.452] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032a8)
[ 7595.453] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032cc)
[ 7602.453] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032cc)
[ 7605.454] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032f0)
[ 7612.454] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032f0)
[ 7615.455] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003314)
[ 7622.455] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003314)
[ 7625.456] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003338)
[ 7632.456] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003338)
[ 7635.457] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000335c)
[ 7642.457] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000335c)
[ 7645.458] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003380)
[ 7652.458] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003380)
[ 7655.459] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033a4)
[ 7662.459] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033a4)
[ 7665.460] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033c8)
[ 7672.460] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033c8)
[ 7675.461] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033ec)
[ 7682.461] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033ec)
[ 7685.462] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003410)
[ 7692.462] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003410)
[ 7695.463] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003434)
[ 7702.463] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003434)
[ 7705.464] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003458)
[ 7712.464] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003458)
[ 7715.465] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000347c)
[ 7722.465] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000347c)
[ 7725.466] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034a0)
[ 7732.466] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034a0)
[ 7735.467] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034c4)
[ 7742.467] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034c4)
[ 7745.468] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034e8)
[ 7752.468] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034e8)
[ 7755.469] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000350c)
[ 7762.469] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000350c)
[ 7765.470] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003530)
[ 7772.470] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003530)
[ 7775.471] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003554)
[ 7782.471] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003554)
[ 7785.472] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003578)
[ 7792.472] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003578)
[ 7795.473] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000359c)
[ 7802.473] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000359c)
[ 7805.474] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035c0)
[ 7812.474] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035c0)
[ 7815.475] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035e4)
[ 7822.475] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035e4)
[ 7825.476] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003608)
[ 7832.476] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003608)
[ 7835.477] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000362c)
[ 7842.477] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000362c)
[ 7845.478] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003650)
[ 7852.478] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003650)
[ 7855.479] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003674)
[ 7862.479] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003674)
[ 7865.480] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003698)
[ 7872.480] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003698)
[ 7875.481] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036bc)
[ 7882.481] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036bc)
[ 7885.482] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036e0)
[ 7892.482] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036e0)
journalctl:
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
NVRM: Xid (PCI:0000:01:00): 12, COCOD 00000000 e0016100 0000008a 000002fc 00000003
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
So what do you think? Could these problems have been caused by gradual overheating of the graphics card for approximately one year? Or maybe the last driver update somehow messed up the graphics card? I need to know this, because I want to know, whether the problem will repeat itself if I buy another Go 7600 and replace the buggy graphics card with another GO 7600. If it's a "gradual overheating due to a faulty driver"-issue the next card will probably stop working as well after one year. It's interesting to note that nvidia-smi doesn't display the Fan Speed for this graphics card. Does this card have a built-in fan?
Thanks for your help.I've got similar problem with GF540m, since updating to 302.17 I cannot modprobe nvidia:
ERROR: could not insert 'nvidia': No such device
dmesg:
[ 1230.814823] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 1230.814827] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 1230.814909] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0df4) installed
[ 1230.814910] NVRM: in this system is not supported by the 302.17 NVIDIA Linux
[ 1230.814910] NVRM: graphics driver release. Please see 'Appendix A -
[ 1230.814911] NVRM: Supported NVIDIA GPU Products' in this release's README,
[ 1230.814912] NVRM: available on the Linux graphics driver download page at
[ 1230.814913] NVRM: www.nvidia.com.
[ 1230.814921] nvidia: probe of 0000:01:00.0 failed with error -1
[ 1230.814933] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 1230.814934] NVRM: None of the NVIDIA graphics adapters were initialized!
For the record: with 295.x everything (optirun, bbswitch) was ok. -
Stock kernel isn't compatible with nvidia-dkms and nvidia-hook?
Hello pals
I'm using linux-ice, linux-lqx and linux-ck kernels with nvidia-dkms and nvidia-hook. Everything is ok, with kde upping.
I've started from stock kernel. During the dkms (or hook, I don't remember) pacman says that nvidia and nvidia(dkms or hook) were incompatible... remove nvidia? I've selected yes
After it, stock kernel don't upps the kde... stays on black screen. Login on tty1, 2 or 3 is possible, with ctrl+alt+F1...F3, but, kde with kernel don't works
no errors appears.
to force stock kernel been compiled by hook, I wait a while, when using the other kernels, and yesterday I did a "Syyu"
new kernel, new linux-headers too... but still blank screen
I only can use stock kernel and Nvidia driver, not dkms/hook installed one?Ok, i know little about dkms / mkinitcpio hooks , but best option seems to try and build the nividia module manually to get more info.
nvidia-hook gets sources from here : https://github.com/alucryd/mkinitcpio-hooks/ ,
build ()
_version=$(pacman -Qs '^nvidia$'|sed 's/^[^ ]* \|-[0-9]*$//g;2d')
echo "Building nvidia modules for ${KERNELVERSION} kernel..."
dkms install nvidia/${_version} -k ${KERNELVERSION}/_arch
echo "Ok."
help ()
cat<<HELPEOF
This hook rebuilds nvidia modules. It does nothing to the initrd image.
HELPEOF
looks like all the hook does is run dkms install, try running that command manually to get more info. -
[SOLVED] Can't launch X server with nvidia card
I am having difficulties setting up X on my computer. Hardware is Nvidia Geforce 970 GTX. I keep getting the error:
modprobe: ERROR: could not insert 'nvidia': No such device
(EE) Fatal server error: no screens found
Here's some additional info. Help is much appreciated.
lspci:
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-LM
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.3 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 4 (rev d0)
00:1c.4 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 5 (rev d0)
00:1c.6 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 7 (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
02:08.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
02:10.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
03:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
06:00.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:01.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:02.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:03.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:04.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:05.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:06.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:07.0 PCI bridge: ASMedia Technology Inc. Device 1187
0a:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
0d:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
0e:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01)
0f:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
10:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
20-nvidia.conf:
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:3:0:0"
Option "NoLogo" "true"
EndSection
Xorg.0.log:
[ 258.707]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 258.707] X Protocol Version 11, Revision 0
[ 258.707] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 258.707] Current Operating System: Linux Bastet 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 258.707] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off
[ 258.707] Build Date: 29 December 2014 01:09:58PM
[ 258.707]
[ 258.707] Current version of pixman: 0.32.6
[ 258.707] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 258.707] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 258.707] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 30 00:53:53 2014
[ 258.707] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 258.707] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 258.707] (==) No Layout section. Using the first Screen section.
[ 258.707] (==) No screen section available. Using defaults.
[ 258.707] (**) |-->Screen "Default Screen Section" (0)
[ 258.707] (**) | |-->Monitor "<default monitor>"
[ 258.707] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 258.707] (**) | |-->Device "Device0"
[ 258.707] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 258.707] (==) Automatically adding devices
[ 258.707] (==) Automatically enabling devices
[ 258.707] (==) Automatically adding GPU devices
[ 258.708] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 258.708] Entry deleted from font path.
[ 258.708] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 258.708] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 258.708] Entry deleted from font path.
[ 258.708] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 258.708] (==) FontPath set to:
/usr/share/fonts/misc/
[ 258.708] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 258.708] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 258.708] (II) Loader magic: 0x818d80
[ 258.708] (II) Module ABI versions:
[ 258.708] X.Org ANSI C Emulation: 0.4
[ 258.708] X.Org Video Driver: 18.0
[ 258.708] X.Org XInput driver : 21.0
[ 258.708] X.Org Server Extension : 8.0
[ 258.708] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 258.709] (--) PCI:*(0:3:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 258.709] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 258.709] (II) LoadModule: "glx"
[ 258.709] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 258.714] (II) Module glx: vendor="NVIDIA Corporation"
[ 258.714] compiled for 4.0.2, module version = 1.0.0
[ 258.714] Module class: X.Org Server Extension
[ 258.714] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 258.714] (II) LoadModule: "nvidia"
[ 258.714] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 258.714] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 258.714] compiled for 4.0.2, module version = 1.0.0
[ 258.714] Module class: X.Org Video Driver
[ 258.714] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 258.714] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 258.714] (++) using VT number 1
[ 258.714] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 258.714] (II) Loading sub module "fb"
[ 258.714] (II) LoadModule: "fb"
[ 258.714] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 258.714] (II) Module fb: vendor="X.Org Foundation"
[ 258.714] compiled for 1.16.3, module version = 1.0.0
[ 258.714] ABI class: X.Org ANSI C Emulation, version 0.4
[ 258.714] (II) Loading sub module "wfb"
[ 258.714] (II) LoadModule: "wfb"
[ 258.714] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 258.715] (II) Module wfb: vendor="X.Org Foundation"
[ 258.715] compiled for 1.16.3, module version = 1.0.0
[ 258.715] ABI class: X.Org ANSI C Emulation, version 0.4
[ 258.715] (II) Loading sub module "ramdac"
[ 258.715] (II) LoadModule: "ramdac"
[ 258.715] (II) Module "ramdac" already built-in
[ 258.779] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[ 258.779] (EE) NVIDIA: system's kernel log for additional error messages and
[ 258.779] (EE) NVIDIA: consult the NVIDIA README for details.
[ 258.779] (EE) No devices detected.
[ 258.779] (EE)
Fatal server error:
[ 258.779] (EE) no screens found(EE)
[ 258.779] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 258.779] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 258.779] (EE)
Last edited by Nepherte (2014-12-30 10:05:05)dmesg (check the last messages):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off pci=biosirq
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009e51ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e520000-0x000000009e526fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e527000-0x000000009e984fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e985000-0x000000009edeffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009edf0000-0x00000000bd921fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd922000-0x00000000bdc8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc8f000-0x00000000bdcaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcb0000-0x00000000be1d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be1d9000-0x00000000beffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] PCI: Unknown option `biosirq'
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x9c598018-0x9c5b9a57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000091000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009c598017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c598018-0x000000009c5b9a57] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c5b9a58-0x000000009e51ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e520000-0x000000009e526fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009e527000-0x000000009e984fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e985000-0x000000009edeffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009edf0000-0x00000000bd921fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bd922000-0x00000000bdc8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bdc8f000-0x00000000bdcaffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bdcb0000-0x00000000be1d8fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be1d9000-0x00000000beffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdc95000 ACPI=0xbdc95000 SMBIOS=0xbef4e498
[ 0.000000] efi: mem00: type=6, attr=0x800000000000000f, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem05: type=5, attr=0x800000000000000f, range=[0x0000000000090000-0x0000000000091000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000091000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f4f000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f4f000-0x000000007fcb9000) (2013MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcb9000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x000000009ae13000) (430MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000009ae13000-0x000000009af13000) (1MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009af13000-0x000000009c598000) (22MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000009c598000-0x000000009c5ba000) (0MB)
[ 0.000000] efi: mem16: type=1, attr=0xf, range=[0x000000009c5ba000-0x000000009e520000) (31MB)
[ 0.000000] efi: mem17: type=10, attr=0xf, range=[0x000000009e520000-0x000000009e527000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000009e527000-0x000000009e688000) (1MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000009e688000-0x000000009e94a000) (2MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000009e94a000-0x000000009e94f000) (0MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000009e94f000-0x000000009e953000) (0MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000009e953000-0x000000009e968000) (0MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x000000009e968000-0x000000009e97a000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000009e97a000-0x000000009e985000) (0MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x000000009e985000-0x000000009edf0000) (4MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000009edf0000-0x000000009ee03000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x000000009ee03000-0x000000009ee07000) (0MB)
[ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x000000009ee07000-0x000000009ee12000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x000000009ee12000-0x00000000b903e000) (418MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000b903e000-0x00000000b919d000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000b919d000-0x00000000b91ab000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000b91ab000-0x00000000b91c7000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000b91c7000-0x00000000b91ce000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000b91ce000-0x00000000b91fe000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000b91fe000-0x00000000b9211000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000b9211000-0x00000000b9292000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000b9292000-0x00000000b92b7000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000b92b7000-0x00000000b92d3000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000b92d3000-0x00000000b92e0000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000b92e0000-0x00000000b9315000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000b9315000-0x00000000b9330000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000b9330000-0x00000000b9375000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000b9375000-0x00000000b9398000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000b9398000-0x00000000b93cd000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000b93cd000-0x00000000b93ea000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000b93ea000-0x00000000b93f0000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000b93f0000-0x00000000b9408000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000b9408000-0x00000000b9455000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000b9455000-0x00000000b947d000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000b947d000-0x00000000b951b000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000b951b000-0x00000000b9529000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000b9529000-0x00000000b9545000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000b9545000-0x00000000b954c000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x00000000b954c000-0x00000000b957a000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x00000000b957a000-0x00000000b958d000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000b958d000-0x00000000b960f000) (0MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x00000000b960f000-0x00000000b9634000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x00000000b9634000-0x00000000b9651000) (0MB)
[ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x00000000b9651000-0x00000000b965e000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x00000000b965e000-0x00000000b9692000) (0MB)
[ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x00000000b9692000-0x00000000b96ad000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x00000000b96ad000-0x00000000b96f2000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x00000000b96f2000-0x00000000b9715000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x00000000b9715000-0x00000000b974c000) (0MB)
[ 0.000000] efi: mem65: type=7, attr=0xf, range=[0x00000000b974c000-0x00000000b9769000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000b9769000-0x00000000b981e000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x00000000b981e000-0x00000000b986b000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000b986b000-0x00000000b9898000) (0MB)
[ 0.000000] efi: mem69: type=7, attr=0xf, range=[0x00000000b9898000-0x00000000b98a6000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000b98a6000-0x00000000b98c1000) (0MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x00000000b98c1000-0x00000000b98c8000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000b98c8000-0x00000000b998d000) (0MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x00000000b998d000-0x00000000b999f000) (0MB)
[ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x00000000b999f000-0x00000000b99d0000) (0MB)
[ 0.000000] efi: mem75: type=7, attr=0xf, range=[0x00000000b99d0000-0x00000000b99d5000) (0MB)
[ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x00000000b99d5000-0x00000000b9a0f000) (0MB)
[ 0.000000] efi: mem77: type=7, attr=0xf, range=[0x00000000b9a0f000-0x00000000b9a17000) (0MB)
[ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x00000000b9a17000-0x00000000b9ac9000) (0MB)
[ 0.000000] efi: mem79: type=7, attr=0xf, range=[0x00000000b9ac9000-0x00000000b9ad3000) (0MB)
[ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x00000000b9ad3000-0x00000000b9c16000) (1MB)
[ 0.000000] efi: mem81: type=7, attr=0xf, range=[0x00000000b9c16000-0x00000000b9c24000) (0MB)
[ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x00000000b9c24000-0x00000000b9c40000) (0MB)
[ 0.000000] efi: mem83: type=7, attr=0xf, range=[0x00000000b9c40000-0x00000000b9c47000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000b9c47000-0x00000000b9c77000) (0MB)
[ 0.000000] efi: mem85: type=7, attr=0xf, range=[0x00000000b9c77000-0x00000000b9c7c000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000b9c7c000-0x00000000b9d4e000) (0MB)
[ 0.000000] efi: mem87: type=7, attr=0xf, range=[0x00000000b9d4e000-0x00000000b9d5b000) (0MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000b9d5b000-0x00000000b9d8d000) (0MB)
[ 0.000000] efi: mem89: type=7, attr=0xf, range=[0x00000000b9d8d000-0x00000000b9d95000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000b9d95000-0x00000000b9fc0000) (2MB)
[ 0.000000] efi: mem91: type=7, attr=0xf, range=[0x00000000b9fc0000-0x00000000b9fc7000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000b9fc7000-0x00000000ba0cd000) (1MB)
[ 0.000000] efi: mem93: type=7, attr=0xf, range=[0x00000000ba0cd000-0x00000000ba0da000) (0MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000ba0da000-0x00000000ba288000) (1MB)
[ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x00000000ba288000-0x00000000ba293000) (0MB)
[ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x00000000ba293000-0x00000000ba341000) (0MB)
[ 0.000000] efi: mem97: type=7, attr=0xf, range=[0x00000000ba341000-0x00000000ba348000) (0MB)
[ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x00000000ba348000-0x00000000ba40c000) (0MB)
[ 0.000000] efi: mem99: type=7, attr=0xf, range=[0x00000000ba40c000-0x00000000ba416000) (0MB)
[ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x00000000ba416000-0x00000000ba44f000) (0MB)
[ 0.000000] efi: mem101: type=7, attr=0xf, range=[0x00000000ba44f000-0x00000000ba45c000) (0MB)
[ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x00000000ba45c000-0x00000000ba821000) (3MB)
[ 0.000000] efi: mem103: type=7, attr=0xf, range=[0x00000000ba821000-0x00000000ba822000) (0MB)
[ 0.000000] efi: mem104: type=4, attr=0xf, range=[0x00000000ba822000-0x00000000ba8da000) (0MB)
[ 0.000000] efi: mem105: type=7, attr=0xf, range=[0x00000000ba8da000-0x00000000ba8dc000) (0MB)
[ 0.000000] efi: mem106: type=4, attr=0xf, range=[0x00000000ba8dc000-0x00000000baa8c000) (1MB)
[ 0.000000] efi: mem107: type=7, attr=0xf, range=[0x00000000baa8c000-0x00000000baa91000) (0MB)
[ 0.000000] efi: mem108: type=4, attr=0xf, range=[0x00000000baa91000-0x00000000bab22000) (0MB)
[ 0.000000] efi: mem109: type=7, attr=0xf, range=[0x00000000bab22000-0x00000000bab23000) (0MB)
[ 0.000000] efi: mem110: type=4, attr=0xf, range=[0x00000000bab23000-0x00000000baba2000) (0MB)
[ 0.000000] efi: mem111: type=7, attr=0xf, range=[0x00000000baba2000-0x00000000baba3000) (0MB)
[ 0.000000] efi: mem112: type=4, attr=0xf, range=[0x00000000baba3000-0x00000000bac04000) (0MB)
[ 0.000000] efi: mem113: type=7, attr=0xf, range=[0x00000000bac04000-0x00000000bac07000) (0MB)
[ 0.000000] efi: mem114: type=4, attr=0xf, range=[0x00000000bac07000-0x00000000bac5c000) (0MB)
[ 0.000000] efi: mem115: type=7, attr=0xf, range=[0x00000000bac5c000-0x00000000bac5e000) (0MB)
[ 0.000000] efi: mem116: type=4, attr=0xf, range=[0x00000000bac5e000-0x00000000baef6000) (2MB)
[ 0.000000] efi: mem117: type=7, attr=0xf, range=[0x00000000baef6000-0x00000000baf04000) (0MB)
[ 0.000000] efi: mem118: type=4, attr=0xf, range=[0x00000000baf04000-0x00000000baf2a000) (0MB)
[ 0.000000] efi: mem119: type=7, attr=0xf, range=[0x00000000baf2a000-0x00000000baf30000) (0MB)
[ 0.000000] efi: mem120: type=4, attr=0xf, range=[0x00000000baf30000-0x00000000baf4a000) (0MB)
[ 0.000000] efi: mem121: type=7, attr=0xf, range=[0x00000000baf4a000-0x00000000baf4f000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000baf4f000-0x00000000bb3e4000) (4MB)
[ 0.000000] efi: mem123: type=7, attr=0xf, range=[0x00000000bb3e4000-0x00000000bb3e6000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000bb3e6000-0x00000000bb3ed000) (0MB)
[ 0.000000] efi: mem125: type=7, attr=0xf, range=[0x00000000bb3ed000-0x00000000bb3ef000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x00000000bb3ef000-0x00000000bb3f5000) (0MB)
[ 0.000000] efi: mem127: type=7, attr=0xf, range=[0x00000000bb3f5000-0x00000000bb3f8000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x00000000bb3f8000-0x00000000bb40c000) (0MB)
[ 0.000000] efi: mem129: type=7, attr=0xf, range=[0x00000000bb40c000-0x00000000bb410000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000bb410000-0x00000000bb445000) (0MB)
[ 0.000000] efi: mem131: type=7, attr=0xf, range=[0x00000000bb445000-0x00000000bb448000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000bb448000-0x00000000bb462000) (0MB)
[ 0.000000] efi: mem133: type=7, attr=0xf, range=[0x00000000bb462000-0x00000000bb464000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000bb464000-0x00000000bb469000) (0MB)
[ 0.000000] efi: mem135: type=7, attr=0xf, range=[0x00000000bb469000-0x00000000bb46b000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x00000000bb46b000-0x00000000bb473000) (0MB)
[ 0.000000] efi: mem137: type=7, attr=0xf, range=[0x00000000bb473000-0x00000000bb474000) (0MB)
[ 0.000000] efi: mem138: type=4, attr=0xf, range=[0x00000000bb474000-0x00000000bb489000) (0MB)
[ 0.000000] efi: mem139: type=7, attr=0xf, range=[0x00000000bb489000-0x00000000bb48a000) (0MB)
[ 0.000000] efi: mem140: type=4, attr=0xf, range=[0x00000000bb48a000-0x00000000bcf39000) (26MB)
[ 0.000000] efi: mem141: type=7, attr=0xf, range=[0x00000000bcf39000-0x00000000bd015000) (0MB)
[ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x00000000bd015000-0x00000000bd922000) (9MB)
[ 0.000000] efi: mem143: type=0, attr=0xf, range=[0x00000000bd922000-0x00000000bd9e4000) (0MB)
[ 0.000000] efi: mem144: type=0, attr=0xf, range=[0x00000000bd9e4000-0x00000000bdc8f000) (2MB)
[ 0.000000] efi: mem145: type=9, attr=0xf, range=[0x00000000bdc8f000-0x00000000bdc95000) (0MB)
[ 0.000000] efi: mem146: type=9, attr=0xf, range=[0x00000000bdc95000-0x00000000bdcb0000) (0MB)
[ 0.000000] efi: mem147: type=10, attr=0xf, range=[0x00000000bdcb0000-0x00000000bddb8000) (1MB)
[ 0.000000] efi: mem148: type=10, attr=0xf, range=[0x00000000bddb8000-0x00000000be1d9000) (4MB)
[ 0.000000] efi: mem149: type=6, attr=0x800000000000000f, range=[0x00000000be1d9000-0x00000000be488000) (2MB)
[ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000be488000-0x00000000beeaf000) (10MB)
[ 0.000000] efi: mem151: type=6, attr=0x800000000000000f, range=[0x00000000beeaf000-0x00000000beeb2000) (0MB)
[ 0.000000] efi: mem152: type=6, attr=0x800000000000000f, range=[0x00000000beeb2000-0x00000000bef50000) (0MB)
[ 0.000000] efi: mem153: type=5, attr=0x800000000000000f, range=[0x00000000bef50000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem154: type=5, attr=0x800000000000000f, range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem155: type=4, attr=0xf, range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem156: type=7, attr=0xf, range=[0x0000000100000000-0x000000043f000000) (13296MB)
[ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem160: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem161: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem162: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-WS, BIOS 1204 07/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0430000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0438000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 043C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 043E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff]
[ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9e51ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9e3fffff] page 2M
[ 0.000000] [mem 0x9e400000-0x9e51ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9e527000-0x9e984fff]
[ 0.000000] [mem 0x9e527000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e984fff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9edf0000-0xbd921fff]
[ 0.000000] [mem 0x9edf0000-0x9edfffff] page 4k
[ 0.000000] [mem 0x9ee00000-0xbd7fffff] page 2M
[ 0.000000] [mem 0xbd800000-0xbd921fff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fcb9000-0x7fffffff]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff]
[ 0.000000] NODE_DATA [mem 0x43eff8000-0x43effbfff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0008ffff]
[ 0.000000] node 0: [mem 0x00091000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9e51ffff]
[ 0.000000] node 0: [mem 0x9e527000-0x9e984fff]
[ 0.000000] node 0: [mem 0x9edf0000-0xbd921fff]
[ 0.000000] node 0: [mem 0xbefff000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x43effffff]
[ 0.000000] On node 0 totalpages: 4179020
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12051 pages used for memmap
[ 0.000000] DMA32 zone: 771249 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403776 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c598000-0x9c598fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c5b9000-0x9c5b9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e520000-0x9e526fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e985000-0x9edeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd922000-0xbdc8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc8f000-0xbdcaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdcb0000-0xbe1d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1d9000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s82752 r8192 d23744 u2097152
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113700
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off pci=biosirq
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16297060K/16716080K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 419020K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:24 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3598.042 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7198.92 BogoMIPS (lpj=11993473)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.001187] Security Framework initialized
[ 0.001191] Yama: becoming mindful.
[ 0.001802] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003720] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004536] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004547] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004689] Initializing cgroup subsys memory
[ 0.004693] Initializing cgroup subsys devices
[ 0.004694] Initializing cgroup subsys freezer
[ 0.004695] Initializing cgroup subsys net_cls
[ 0.004696] Initializing cgroup subsys blkio
[ 0.004710] CPU: Physical Processor ID: 0
[ 0.004711] CPU: Processor Core ID: 0
[ 0.004713] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005425] mce: CPU supports 9 MCE banks
[ 0.005435] CPU0: Thermal monitoring enabled (TM1)
[ 0.005443] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.007800] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
[ 0.009280] ftrace: allocating 20687 entries in 81 pages
[ 0.014722] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.014723] smpboot: SMP motherboard not detected
[ 0.014743] TSC deadline timer enabled
[ 0.014744] smpboot: SMP disabled
[ 0.014756] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.014768] ... version: 3
[ 0.014769] ... bit width: 48
[ 0.014769] ... generic registers: 4
[ 0.014770] ... value mask: 0000ffffffffffff
[ 0.014770] ... max period: 0000ffffffffffff
[ 0.014771] ... fixed-purpose events: 3
[ 0.014771] ... event mask: 000000070000000f
[ 0.031484] x86: Booted up 1 node, 1 CPUs
[ 0.031486] smpboot: Total of 1 processors activated (7198.92 BogoMIPS)
[ 0.031509] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.031540] devtmpfs: initialized
[ 0.033214] PM: Registering ACPI NVS region [mem 0x9e520000-0x9e526fff] (28672 bytes)
[ 0.033215] PM: Registering ACPI NVS region [mem 0xbdcb0000-0xbe1d8fff] (5410816 bytes)
[ 0.033692] pinctrl core: initialized pinctrl subsystem
[ 0.033718] RTC time: 1:46:17, date: 12/30/14
[ 0.033767] NET: Registered protocol family 16
[ 0.033828] cpuidle: using governor ladder
[ 0.033830] cpuidle: using governor menu
[ 0.033891] PCI: Using configuration type 1 for base access
[ 0.045003] ACPI: Interpreter disabled.
[ 0.045040] vgaarb: loaded
[ 0.045084] PCI: Probing PCI hardware
[ 0.045085] PCI: root bus 00: using default resources
[ 0.045085] PCI: Probing PCI hardware (bus 00)
[ 0.045098] PCI host bridge to bus 0000:00
[ 0.045099] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.045100] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 0.045101] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.045106] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.045142] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.045163] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.045208] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.045223] pci 0000:00:14.0: reg 0x10: [mem 0xdf720000-0xdf72ffff 64bit]
[ 0.045269] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.045297] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.045312] pci 0000:00:16.0: reg 0x10: [mem 0xdf73a000-0xdf73a00f 64bit]
[ 0.045362] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.045396] pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000
[ 0.045409] pci 0000:00:19.0: reg 0x10: [mem 0xdf700000-0xdf71ffff]
[ 0.045415] pci 0000:00:19.0: reg 0x14: [mem 0xdf738000-0xdf738fff]
[ 0.045421] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.045467] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.045499] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.045514] pci 0000:00:1a.0: reg 0x10: [mem 0xdf737000-0xdf7373ff]
[ 0.045585] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.045618] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.045626] pci 0000:00:1b.0: reg 0x10: [mem 0xdf730000-0xdf733fff 64bit]
[ 0.045669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.045696] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.045745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.045774] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.045823] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.045851] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[ 0.045900] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.045929] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[ 0.045978] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.046011] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.046027] pci 0000:00:1d.0: reg 0x10: [mem 0xdf736000-0xdf7363ff]
[ 0.046098] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.046130] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.046239] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.046251] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.046256] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.046261] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.046266] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.046271] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.046276] pci 0000:00:1f.2: reg 0x24: [mem 0xdf735000-0xdf7357ff]
[ 0.046304] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.046328] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.046338] pci 0000:00:1f.3: reg 0x10: [mem 0xdf734000-0xdf7340ff 64bit]
[ 0.046354] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.046407] pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
[ 0.046413] pci 0000:01:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff]
[ 0.046446] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.051564] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.051566] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.051567] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf1fffff]
[ 0.051570] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.051606] pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
[ 0.051645] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.051677] pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
[ 0.051716] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 0.051745] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.051748] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.051750] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.051753] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.051779] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.051821] pci 0000:03:00.0: [10de:13c2] type 00 class 0x030000
[ 0.051830] pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.051840] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.051851] pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.051858] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.051865] pci 0000:03:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.051918] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[ 0.051931] pci 0000:03:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.051938] pci 0000:03:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.058252] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.058255] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.058257] pci 0000:02:10.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.058260] pci 0000:02:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.058300] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.058349] pci 0000:06:00.0: [1b21:1187] type 01 class 0x060400
[ 0.058430] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.064932] pci 0000:00:1c.3: PCI bridge to [bus 06-0e]
[ 0.064934] pci 0000:00:1c.3: bridge window [io 0xa000-0xcfff]
[ 0.064936] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.065000] pci 0000:07:01.0: [1b21:1187] type 01 class 0x060400
[ 0.065083] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.065126] pci 0000:07:02.0: [1b21:1187] type 01 class 0x060400
[ 0.065209] pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
[ 0.065254] pci 0000:07:03.0: [1b21:1187] type 01 class 0x060400
[ 0.065337] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
[ 0.065382] pci 0000:07:04.0: [1b21:1187] type 01 class 0x060400
[ 0.065464] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
[ 0.065510] pci 0000:07:05.0: [1b21:1187] type 01 class 0x060400
[ 0.065593] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
[ 0.065641] pci 0000:07:06.0: [1b21:1187] type 01 class 0x060400
[ 0.065724] pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
[ 0.065772] pci 0000:07:07.0: [1b21:1187] type 01 class 0x060400
[ 0.065855] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
[ 0.065918] pci 0000:06:00.0: PCI bridge to [bus 07-0e]
[ 0.065923] pci 0000:06:00.0: bridge window [io 0xa000-0xcfff]
[ 0.065926] pci 0000:06:00.0: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.065979] pci 0000:07:01.0: PCI bridge to [bus 08]
[ 0.066038] pci 0000:07:02.0: PCI bridge to [bus 09]
[ 0.066117] pci 0000:0a:00.0: [1b21:0612] type 00 class 0x010601
[ 0.066134] pci 0000:0a:00.0: reg 0x10: [io 0xc050-0xc057]
[ 0.066147] pci 0000:0a:00.0: reg 0x14: [io 0xc040-0xc043]
[ 0.066160] pci 0000:0a:00.0: reg 0x18: [io 0xc030-0xc037]
[ 0.066172] pci 0000:0a:00.0: reg 0x1c: [io 0xc020-0xc023]
[ 0.066185] pci 0000:0a:00.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.066198] pci 0000:0a:00.0: reg 0x24: [mem 0xdf400000-0xdf4001ff]
[ 0.071619] pci 0000:07:03.0: PCI bridge to [bus 0a]
[ 0.071625] pci 0000:07:03.0: bridge window [io 0xc000-0xcfff]
[ 0.071628] pci 0000:07:03.0: bridge window [mem 0xdf400000-0xdf4fffff]
[ 0.071681] pci 0000:07:04.0: PCI bridge to [bus 0b]
[ 0.071741] pci 0000:07:05.0: PCI bridge to [bus 0c]
[ 0.071832] pci 0000:0d:00.0: [8086:1533] type 00 class 0x020000
[ 0.071853] pci 0000:0d:00.0: reg 0x10: [mem 0xdf300000-0xdf37ffff]
[ 0.071886] pci 0000:0d:00.0: reg 0x18: [io 0xb000-0xb01f]
[ 0.071903] pci 0000:0d:00.0: reg 0x1c: [mem 0xdf380000-0xdf383fff]
[ 0.072047] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.078303] pci 0000:07:06.0: PCI bridge to [bus 0d]
[ 0.078309] pci 0000:07:06.0: bridge window [io 0xb000-0xbfff]
[ 0.078312] pci 0000:07:06.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.078387] pci 0000:0e:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.078414] pci 0000:0e:00.0: reg 0x10: [mem 0xdf200000-0xdf2007ff 64bit]
[ 0.078429] pci 0000:0e:00.0: reg 0x18: [io 0xa000-0xa0ff]
[ 0.078555] pci 0000:0e:00.0: supports D2
[ 0.078556] pci 0000:0e:00.0: PME# supported from D2 D3hot D3cold
[ 0.084986] pci 0000:07:07.0: PCI bridge to [bus 0e]
[ 0.084991] pci 0000:07:07.0: bridge window [io 0xa000-0xafff]
[ 0.084994] pci 0000:07:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.085083] pci 0000:0f:00.0: [1b21:0612] type 00 class 0x010601
[ 0.085095] pci 0000:0f:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.085104] pci 0000:0f:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.085113] pci 0000:0f:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.085122] pci 0000:0f:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.085132] pci 0000:0f:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.085141] pci 0000:0f:00.0: reg 0x24: [mem 0xdf600000-0xdf6001ff]
[ 0.091661] pci 0000:00:1c.4: PCI bridge to [bus 0f]
[ 0.091663] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.091665] pci 0000:00:1c.4: bridge window [mem 0xdf600000-0xdf6fffff]
[ 0.091720] pci 0000:10:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.091739] pci 0000:10:00.0: reg 0x10: [mem 0xdf500000-0xdf507fff 64bit]
[ 0.091849] pci 0000:10:00.0: PME# supported from D3cold
[ 0.098344] pci 0000:00:1c.6: PCI bridge to [bus 10]
[ 0.098347] pci 0000:00:1c.6: bridge window [mem 0xdf500000-0xdf5fffff]
[ 0.098364] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 10
[ 0.098440] PCI: pci_cache_line_size set to 64 bytes
[ 0.098515] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.098516] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.098517] e820: reserve RAM buffer [mem 0x9c598018-0x9fffffff]
[ 0.098517] e820: reserve RAM buffer [mem 0x9e520000-0x9fffffff]
[ 0.098518] e820: reserve RAM buffer [mem 0x9e985000-0x9fffffff]
[ 0.098519] e820: reserve RAM buffer [mem 0xbd922000-0xbfffffff]
[ 0.098520] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.098520] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.098569] NetLabel: Initializing
[ 0.098570] NetLabel: domain hash size = 128
[ 0.098570] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.098576] NetLabel: unlabeled traffic allowed by default
[ 0.098594] Switched to clocksource refined-jiffies
[ 0.100961] pnp: PnP ACPI: disabled
[ 0.101632] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.101639] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.101640] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.101643] pci 0000:02:10.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.101645] pci 0000:02:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101648] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.101649] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.101652] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.101654] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101657] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.101661] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.101662] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf1fffff]
[ 0.101664] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101666] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.101674] pci 0000:07:01.0: PCI bridge to [bus 08]
[ 0.101685] pci 0000:07:02.0: PCI bridge to [bus 09]
[ 0.101696] pci 0000:07:03.0: PCI bridge to [bus 0a]
[ 0.101698] pci 0000:07:03.0: bridge window [io 0xc000-0xcfff]
[ 0.101702] pci 0000:07:03.0: bridge window [mem 0xdf400000-0xdf4fffff]
[ 0.101710] pci 0000:07:04.0: PCI bridge to [bus 0b]
[ 0.101721] pci 0000:07:05.0: PCI bridge to [bus 0c]
[ 0.101733] pci 0000:07:06.0: PCI bridge to [bus 0d]
[ 0.101735] pci 0000:07:06.0: bridge window [io 0xb000-0xbfff]
[ 0.101739] pci 0000:07:06.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.101747] pci 0000:07:07.0: PCI bridge to [bus 0e]
[ 0.101748] pci 0000:07:07.0: bridge window [io 0xa000-0xafff]
[ 0.101753] pci 0000:07:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.101761] pci 0000:06:00.0: PCI bridge to [bus 07-0e]
[ 0.101762] pci 0000:06:00.0: bridge window [io 0xa000-0xcfff]
[ 0.101767] pci 0000:06:00.0: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.101774] pci 0000:00:1c.3: PCI bridge to [bus 06-0e]
[ 0.101776] pci 0000:00:1c.3: bridge window [io 0xa000-0xcfff]
[ 0.101779] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.101783] pci 0000:00:1c.4: PCI bridge to [bus 0f]
[ 0.101785] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.101788] pci 0000:00:1c.4: bridge window [mem 0xdf600000-0xdf6fffff]
[ 0.101793] pci 0000:00:1c.6: PCI bridge to [bus 10]
[ 0.101796] pci 0000:00:1c.6: bridge window [mem 0xdf500000-0xdf5fffff]
[ 0.101801] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.101802] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 0.101803] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.101804] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf1fffff]
[ 0.101805] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101806] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.101807] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.101807] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101808] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.101809] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.101810] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101811] pci_bus 0000:06: resource 0 [io 0xa000-0xcfff]
[ 0.101812] pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf4fffff]
[ 0.101813] pci_bus 0000:07: resource 0 [io 0xa000-0xcfff]
[ 0.101813] pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf4fffff]
[ 0.101814] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.101815] pci_bus 0000:0a: resource 1 [mem 0xdf400000-0xdf4fffff]
[ 0.101816] pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
[ 0.101817] pci_bus 0000:0d: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.101818] pci_bus 0000:0e: resource 0 [io 0xa000-0xafff]
[ 0.101819] pci_bus 0000:0e: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.101819] pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
[ 0.101820] pci_bus 0000:0f: resource 1 [mem 0xdf600000-0xdf6fffff]
[ 0.101821] pci_bus 0000:10: resource 1 [mem 0xdf500000-0xdf5fffff]
[ 0.101833] NET: Registered protocol family 2
[ 0.101941] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.102058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.102147] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.102157] TCP: reno registered
[ 0.102165] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.102195] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.102236] NET: Registered protocol family 1
[ 0.102251] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.103443] pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.121537] PCI: CLS mismatch (64 != 128), using 64 bytes
[ 0.121543] pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.139571] pci 0000:00:1c.6: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.139579] pci 0000:10:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.140768] Unpacking initramfs...
[ 0.175981] Freeing initrd memory: 3356K (ffff88007fcb9000 - ffff880080000000)
[ 0.175987] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.175989] software IO TLB [mem 0xb503e000-0xb903e000] (64MB) mapped at [ffff8800b503e000-ffff8800b903dfff]
[ 0.176028] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.176077] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.176092] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
[ 0.176112] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.176126] Scanning for low memory corruption every 60 seconds
[ 0.176233] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.176239] Initialise system trusted keyring
[ 0.176423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.177103] zpool: loaded
[ 0.177104] zbud: loaded
[ 0.177193] VFS: Disk quotas dquot_6.5.2
[ 0.177209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.177270] msgmni has been set to 31984
[ 0.177299] Key type big_key registered
[ 0.177354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.177366] io scheduler noop registered
[ 0.177367] io scheduler deadline registered
[ 0.177381] io scheduler cfq registered (default)
[ 0.177420] pcieport 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177430] pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
[ 0.177454] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177464] pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
[ 0.177498] pcieport 0000:00:1c.3: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 0.177509] pcieport 0000:00:1c.3: irq 18 for MSI/MSI-X
[ 0.177543] pcieport 0000:00:1c.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177553] pcieport 0000:00:1c.4: irq 19 for MSI/MSI-X
[ 0.177595] pcieport 0000:00:1c.6: irq 20 for MSI/MSI-X
[ 0.177629] pcieport 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177651] pcieport 0000:02:08.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177673] pcieport 0000:02:10.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177697] pcieport 0000:06:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177740] pcieport 0000:07:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177786] pcieport 0000:07:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177830] pcieport 0000:07:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177875] pcieport 0000:07:04.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177920] pcieport 0000:07:05.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177964] pcieport 0000:07:06.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.178009] pcieport 0000:07:07.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.178063] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.178064] pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.178065] pcieport 0000:02:08.0: Signaling PME through PCIe PME interrupt
[ 0.178066] pcieport 0000:02:10.0: Signaling PME through PCIe PME interrupt
[ 0.178066] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.178067] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.178069] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.178078] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.178081] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.178089] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.178090] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.178091] pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
[ 0.178092] pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
[ 0.178093] pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
[ 0.178093] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[ 0.178094] pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
[ 0.178095] pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
[ 0.178095] pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
[ 0.178096] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[ 0.178097] pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
[ 0.178098] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[ 0.178100] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.178109] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.178109] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
[ 0.178112] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.178121] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.178122] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt
[ 0.178124] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.178132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.178140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.178157] efifb: probing for efifb
[ 0.178163] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001b80000, using 3072k, total 3072k
[ 0.178164] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.178165] efifb: scrolling: redraw
[ 0.178165] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.179350] Console: switching to colour frame buffer device 128x48
[ 0.180418] fb0: EFI VGA frame buffer device
[ 0.180422] intel_idle: MWAIT substates: 0x42120
[ 0.180423] intel_idle: v0.4 model 0x3C
[ 0.180424] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.180487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.201010] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.201132] Linux agpgart interface v0.103
[ 0.201221] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.201236] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.201241] Intel P-state driver initializing.
[ 0.201260] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.201311] TCP: cubic registered
[ 0.201359] NET: Registered protocol family 10
[ 0.201460] NET: Registered protocol family 17
[ 0.201549] Loading compiled-in X.509 certificates
[ 0.201556] registered taskstats version 1
[ 0.201938] Magic number: 10:630:762
[ 0.201974] rtc_cmos rtc_cmos: setting system clock to 2014-12-30 01:46:17 UTC (1419903977)
[ 0.202020] PM: Hibernation image not present or could not be loaded.
[ 0.202422] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
[ 0.202423] Write protecting the kernel read-only data: 8192k
[ 0.203481] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 0.203917] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.206804] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.214973] usbcore: registered new interface driver usbfs
[ 0.215012] usbcore: registered new interface driver hub
[ 0.218047] SCSI subsystem initialized
[ 0.221736] libata version 3.00 loaded.
[ 0.222022] ahci 0000:00:1f.2: version 3.0
[ 0.222027] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; please try using pci=biosirq
[ 0.222053] ahci 0000:00:1f.2: irq 21 for MSI/MSI-X
[ 0.222081] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
[ 0.222082] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.222421] usbcore: registered new device driver usb
[ 0.222622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.222688] ehci-pci: EHCI PCI platform driver
[ 0.224499] firewire_ohci 0000:0e:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.224527] genirq: Flags mismatch irq 0. 00000080 (firewire_ohci) vs. 00015a00 (timer)
[ 0.224549] firewire_ohci 0000:0e:00.0: failed to allocate interrupt 0
[ 0.224572] firewire_ohci: probe of 0000:0e:00.0 failed with error -5
[ 0.234786] scsi host0: ahci
[ 0.234841] scsi host1: ahci
[ 0.234886] scsi host2: ahci
[ 0.234929] scsi host3: ahci
[ 0.234972] scsi host4: ahci
[ 0.235014] scsi host5: ahci
[ 0.235035] ata1: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735100 irq 21
[ 0.235037] ata2: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735180 irq 21
[ 0.235037] ata3: DUMMY
[ 0.235039] ata4: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735280 irq 21
[ 0.235039] ata5: DUMMY
[ 0.235039] ata6: DUMMY
[ 0.235058] ahci 0000:0a:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235097] ahci 0000:0a:00.0: irq 22 for MSI/MSI-X
[ 0.235109] ahci 0000:0a:00.0: SSS flag set, parallel bus scan disabled
[ 0.235146] ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.235147] ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.235275] ehci-pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235278] ehci-pci 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.235297] ehci-pci 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.235316] ehci-pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235318] ehci-pci 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.235338] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19
[ 0.235400] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235411] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.235414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.235476] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.235486] xhci_hcd 0000:00:14.0: irq 23 for MSI/MSI-X
[ 0.235714] hub 1-0:1.0: USB hub found
[ 0.235728] hub 1-0:1.0: 14 ports detected
[ 0.235898] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.235900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.235973] hub 2-0:1.0: USB hub found
[ 0.235998] hub 2-0:1.0: 6 ports detected
[ 0.236094] xhci_hcd 0000:10:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.236104] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 0.236106] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 3
[ 0.244565] scsi host6: ahci
[ 0.251214] scsi host7: ahci
[ 0.251240] ata7: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400100 irq 22
[ 0.251242] ata8: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400180 irq 22
[ 0.251285] ahci 0000:0f:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.251314] ahci 0000:0f:00.0: irq 24 for MSI/MSI-X
[ 0.251323] ahci 0000:0f:00.0: SSS flag set, parallel bus scan disabled
[ 0.251350] ahci 0000:0f:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.251351] ahci 0000:0f:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.257910] scsi host8: ahci
[ 0.264602] scsi host9: ahci
[ 0.264625] ata9: SATA max UDMA/133 abar m512@0xdf600000 port 0xdf600100 irq 24
[ 0.264627] ata10: SATA max UDMA/133 abar m512@0xdf600000 port 0xdf600180 irq 24
[ 0.296576] xhci_hcd 0000:10:00.0: irq 25 for MSI/MSI-X
[ 0.296578] xhci_hcd 0000:10:00.0: irq 26 for MSI/MSI-X
[ 0.296710] hub 3-0:1.0: USB hub found
[ 0.296716] hub 3-0:1.0: 2 ports detected
[ 0.296759] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 0.296761] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 4
[ 0.296875] hub 4-0:1.0: USB hub found
[ 0.296880] hub 4-0:1.0: 2 ports detected
[ 0.556696] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.558535] ata1.00: supports DRM functions and may not be fully accessible
[ 0.558561] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.558562] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM01B6Q, max UDMA/133
[ 0.558563] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.558738] ata1.00: supports DRM functions and may not be fully accessible
[ 0.558763] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.558806] ata1.00: configured for UDMA/133
[ 0.563429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.563472] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 0.564753] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.564771] sd 0:0:0:0: [sda] Write Protect is off
[ 0.564772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.564777] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.565118] ata2.00: ATAPI: ASUS BC-12D2HT, 1.00, max UDMA/100
[ 0.565571] sda: sda1 sda2 sda3 sda4
[ 0.565688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.565740] ata2.00: configured for UDMA/100
[ 0.566048] scsi 1:0:0:0: CD-ROM ASUS BC-12D2HT 1.00 PQ: 0 ANSI: 5
[ 0.566799] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.567259] ata4.00: ATA-9: WDC WD3003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 0.567260] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.568491] ata4.00: configured for UDMA/133
[ 0.573548] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.575040] scsi 3:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 0.575102] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 0.575103] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 0.575115] sd 3:0:0:0: [sdb] Write Protect is off
[ 0.575116] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.575121] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.587016] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.588472] sr 1:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.588473] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.588524] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.597116] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 0.602136] sdb: sdb1 sdb2
[ 0.602224] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 0.796333] hub 1-2:1.0: USB hub found
[ 0.796476] hub 1-2:1.0: 4 ports detected
[ 0.897881] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.958892] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.138972] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.142463] usbcore: registered new interface driver usbhid
[ 1.142465] usbhid: USB HID core driver
[ 1.143465] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7/input2
[ 1.198065] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input0
[ 1.198082] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-7:1
[ 1.207130] Switched to clocksource tsc
[ 1.223905] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.254898] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.297340] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[ 1.343905] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.343953] systemd[1]: Detected architecture 'x86-64'.
[ 1.344230] systemd[1]: Set hostname to <Bastet>.
[ 1.387480] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 1.387651] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.387678] systemd[1]: Started Forward Passwor -
Problem with nvidia graphic card, nvlddmkm.sys
I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
Ad far i could read on intetrnet it is a failure with NVIDIA.
Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)Hi,
I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
IPhone not connecting through Bluetooth on iMac 21.5 inch with Nvidia 750 M
On my iMac 21.5 with Nvidia 750 M, both of my iPhones (iPhone 5s and iPhone 6) won't connect through bluetooth. I've tried disconnecting my wireless keyboard and mouse. The same connection error would pop-up. *By the way, you can talk in programmer's terms to me.*
An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458
Maybe you are looking for
-
How to Clean Ink Stains on HP 3050 All-in-One J610 series
Hello - I have an HP Deskjet 3050 All-in-One J610 series printer. I am a Mac User and am getting notifications with each document I print that I need to "Clean Ink Stains on Printer". I have put brand new black and tricolor HP ink cartridges, but
-
MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash
Hello- Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the pre
-
Final Cut Crashes for apparently no reason
Hi, I am experiencing FCP crashing for no reason, usually when i click on the timeline after, perhaps, using the source viewer. The spinning wheel starts and then never stops - i never get a 'this programme has terminated - send report' messages - ju
-
Cisco Works Integration with MARS
Can cisco works be integrated with MARS. I mean cisco works is acting as a syslog server for some switches. Can mars pull the records from Cisco Works and use it for its co-relation
-
How to change hard drive in 20" iMac G5 iSight ?
I opened up the machine to replace a dead hard drive (warranty is over anyway) and discovered there is black tape that seals the edge of the display as well as the area below it. Can I remove this to change the drive and then put it back without detr