DPC_WATCHDOG_VIOLATION Help!

I'm having bsod lately while playing games and weird thing is it's only happens to some games only by far it only happens to The Wolf Among Us and The Walking Dead Season 2 which are telltale games and whenever I play them they freeze and the BSOD DPC_WATCHDOG_VIOLATION
but what's bugging me is it's never happened to me while I'm playing TWD before but now after installing and playing The Wolf Among Us, both games starts freezing and THE BSOD dpc watchdog error appears.
My laptop is not SSD cause it's 1tb and it doesn't happen to other games and it ONLY happens to Telltale games :(
Please Help! (O_O)

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Similar Messages

  • I need help in Fixing my Hp Split x2

    I need help in fixing my hp split x2. I got it with windows 8 but i upgraded to Windows 8.1. sine then I stop accessing my D:/ drive ( 500gb HDD)on which I stored data. Besides, I get DCP watchdog violation Error each time I disconnect the tablet and reconnet it. I also get another error message: DCP_DRIVER_POWER_STATE_FAILURE. Can somebody help me out?

    Hi Alsaab73,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your and getting an error message. The HDD that are you using, I would need the model number. Have you looked in the device manager to see if there is a conflict with the driver installed? It might be listed under the USB devices? Have you tried a different port on the Notebook?  Right clicking an updating the driver might be all that is needed.
    As per the description of the issue you get error DPC_WATCHDOG_VIOLATION.
    Is the issue confined to any particular game or a certain function you are choosing on the Notebook?
    The First thing you need to try is disable any firewalls or virus protection and restart the Notebook.
    If that does not helps try these steps from Microsoft.
    Boot the computer using the Windows 8 bootable DVD.
    On the Install Now screen click on Repair your computer.
    You will then see a blue screen and an option to choose.
    Click on Advanced Options and then click on Troubleshoot.
    Click on Automatic Repair and follow the prompted instructions.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • DPC_WATCHDOG_VIOLATION error on windows 8.1 X64

    hello their ! i have beeen using windows 8.1 pro X64 for the last 3-4 months and it worked fine .but from few days ago a blue screen error freezing my pc every time . thoug it shows DPC_WATCHDOG_VIOLATION sometimes but when i try to use chrome
    it occurs more frequently . i have uploaded the dump files here . plz help me out!

    Hi,
    We don't find your dump file in your post, Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
    Link for how to  upload below.
    http://www.wikihow.com/Use-SkyDrive 
    Here is the error information for your reference:
    Bug Check 0x133 DPC_WATCHDOG_VIOLATION
    http://msdn.microsoft.com/en-us/library/windows/hardware/jj154556(v=vs.85).aspx
    Kate Li
    TechNet Community Support

  • DPC_WATCHDOG_VIOLATION error when adding device

    Brand new DELL computer, first thing I did was to update from Windows 8 to 8.1 and one of my devices won't show up, tried to scan for new device and getting that blue screen... Tried updating the disk drive firmware (Seagate st500dm002-1bd142)
    but no update driver on Seagate website or anywhere else. Attached the DMP file... Help?
    https://www.dropbox.com/s/7dmwue71pyuyd56/012114-12328-01.dmp

    UK
    This crash was related to Athw8x.sys with description Qualcomm Atheros Extensible Wireless LAN device driver from company Qualcomm Atheros Communications, I would reinstall the newest driver available
    Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Users\Ken\Desktop\012114-12328-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (2 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
    Machine Name:
    Kernel base = 0xfffff802`12414000 PsLoadedModuleList = 0xfffff802`126d8990
    Debug session time: Tue Jan 21 10:39:10.214 2014 (UTC - 5:00)
    System Uptime: 0 days 0:01:19.954
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 133, {0, 501, 500, 0}
    *** WARNING: Unable to verify timestamp for athw8x.sys
    *** ERROR: Module load completed but symbols could not be loaded for athw8x.sys
    Probably caused by : athw8x.sys ( athw8x+c231b )
    Followup: MachineOwner
    1: kd> !analyze -v
    * Bugcheck Analysis *
    DPC_WATCHDOG_VIOLATION (133)
    The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL
    or above.
    Arguments:
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
    component can usually be identified with a stack trace.
    Arg2: 0000000000000501, The DPC time count (in ticks).
    Arg3: 0000000000000500, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    Debugging Details:
    DPC_TIMEOUT_TYPE: SINGLE_DPC_TIMEOUT_EXCEEDED
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
    BUGCHECK_STR: 0x133
    PROCESS_NAME: System
    CURRENT_IRQL: d
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    LAST_CONTROL_TRANSFER: from fffff80212585f7c to fffff80212561ca0
    STACK_TEXT:
    ffffd000`20638c58 fffff802`12585f7c : 00000000`00000133 00000000`00000000 00000000`00000501 00000000`00000500 : nt!KeBugCheckEx
    ffffd000`20638c60 fffff802`1246881b : fffff802`12be8eb0 ffffd000`20600180 fffff800`028f1e80 0000003d`8b4540c8 : nt! ?? ::FNODOBFM::`string'+0x13ddc
    ffffd000`20638cf0 fffff802`1246848c : 00000000`00000001 ffffd000`20638d70 ffffd000`20638e30 fffff802`126ae920 : nt!KiUpdateRunTime+0x57
    ffffd000`20638d30 fffff802`125e731c : fffff802`126e03f0 00008000`00000000 ffffd000`20600180 00000000`00000002 : nt!KiUpdateTime+0x63c
    ffffd000`20638f10 fffff802`12b9be5f : 00000000`00000000 ffffe000`03962040 00000000`00000000 ffffd000`20600180 : nt!KeClockInterruptNotify+0x5c
    ffffd000`20638f40 fffff802`124aa343 : fffff802`12be8e00 ffffd000`2062a500 ffffd000`2099cb48 fffff802`12562d4a : hal!HalpTimerClockInterrupt+0x4f
    ffffd000`20638f70 fffff802`1256312a : fffff802`12be8e00 ffffe000`03b9edf0 fffff800`028f1ee4 00000000`00000000 : nt!KiCallInterruptServiceRoutine+0xa3
    ffffd000`20638fb0 fffff802`1256350f : ffffd000`2062a60e 00000000`000000d0 ffffd000`2062a5e0 00000000`00000042 : nt!KiInterruptSubDispatchNoLockNoEtw+0xea
    ffffd000`2062a490 fffff800`0278231b : 00000000`00000000 00000000`00000000 fffff800`028f1e80 fffff800`028f1ee4 : nt!KiInterruptDispatchLBControl+0x11f
    ffffd000`2062a620 00000000`00000000 : 00000000`00000000 fffff800`028f1e80 fffff800`028f1ee4 00000000`00000000 : athw8x+0xc231b
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    athw8x+c231b
    fffff800`0278231b ?? ???
    SYMBOL_STACK_INDEX: 9
    SYMBOL_NAME: athw8x+c231b
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: athw8x
    IMAGE_NAME: athw8x.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 50f7c13b
    FAILURE_BUCKET_ID: 0x133_DPC_athw8x+c231b
    BUCKET_ID: 0x133_DPC_athw8x+c231b
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x133_dpc_athw8x+c231b
    FAILURE_ID_HASH: {9320244e-5b0c-ef29-1f75-27c5a7ee7185}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

  • Dpc_watchdog_violation windows 8

    I bought DELL i5 laptop some 15 days back which uses windows 8 64 bit, I repeatedly gets DPC_WATCHDOG_VIOLATION windows 8 blue screen error repeatedly please some one fix my problem.

    We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.  
    We prefer at least 2 DMP files to spot trends and confirm the cause.
    Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
    If you have any questions about the procedure please ask
    Wanikiya and Dyami--Team Zigzag

  • DPC_Watchdog_violation error

    I got a new laptop. But recently I got a few DPC_watchdog_violations crashes.
    My dumplink can be found here: 
    https://skydrive.live.com/redir?resid=4995EFD0693075C4%21803
    I tried nearly everything. I updated my drivers and restarted some programs, but so far nothing has helped.
    Can someone please help me out?

    Bankaaai
    The verified crash was Related to
    Apfiltr.sys Alps Pointing-device Driver.  Yours is 2 years old.  I would install the newest driver available
    Remember to turn off verifier by typing verifier /reset
    Windows 8 Kernel Version 9600 MP (2 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
    Machine Name:
    Kernel base = 0xfffff801`4ec86000 PsLoadedModuleList = 0xfffff801`4ef4a990
    Debug session time: Sat Jan 11 22:21:15.647 2014 (UTC - 5:00)
    System Uptime: 0 days 0:15:25.837
    Loading Kernel Symbols
    *** WARNING: Unable to verify timestamp for Apfiltr.sys
    *** ERROR: Module load completed but symbols could not be loaded for Apfiltr.sys
    DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9)
    The IO manager has caught a misbehaving driver.
    Arguments:
    Arg1: 000000000000000e, Irql > DPC at IoCompleteRequest
    Arg2: 0000000000000007, the current Irql
    Arg3: ffffcf8012954c10, the IRP
    Arg4: 0000000000000000
    Debugging Details:
    BUGCHECK_STR: 0xc9_e
    DRIVER_VERIFIER_IO_VIOLATION_TYPE: e
    CURRENT_IRQL: 7
    IRP_ADDRESS: ffffcf8012954c10
    DEVICE_OBJECT: ffffe00004c4a7e0
    DRIVER_OBJECT: ffffe00004c2a080
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME: System
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    LAST_CONTROL_TRANSFER: from fffff8014f2e6a44 to fffff8014edd3ca0
    STACK_TEXT:
    fffff801`508ecb78 fffff801`4f2e6a44 : 00000000`000000c9 00000000`0000000e 00000000`00000007 ffffcf80`12954c10 : nt!KeBugCheckEx
    fffff801`508ecb80 fffff800`02cf8a37 : 00000000`00000018 fffff801`508eccc0 ffffcf80`12954c10 ffffe000`04c4a930 : nt!IovCompleteRequest+0xac
    fffff801`508ecc50 fffff800`02cc519f : ffffcf80`12954f68 ffffe000`04c33310 00000000`00000001 ffffe000`04c31511 : mouclass!MouseClassServiceCallback+0x3d3
    fffff801`508eccf0 ffffcf80`12954f68 : ffffe000`04c33310 00000000`00000001 ffffe000`04c31511 ffffe000`04c33310 : Apfiltr+0x4319f
    fffff801`508eccf8 ffffe000`04c33310 : 00000000`00000001 ffffe000`04c31511 ffffe000`04c33310 ffffe000`04c31550 : 0xffffcf80`12954f68
    fffff801`508ecd00 00000000`00000001 : ffffe000`04c31511 ffffe000`04c33310 ffffe000`04c31550 fffff801`508e5200 : 0xffffe000`04c33310
    fffff801`508ecd08 ffffe000`04c31511 : ffffe000`04c33310 ffffe000`04c31550 fffff801`508e5200 00000000`00000001 : 0x1
    fffff801`508ecd10 ffffe000`04c33310 : ffffe000`04c31550 fffff801`508e5200 00000000`00000001 fffff801`508ecf88 : 0xffffe000`04c31511
    fffff801`508ecd18 ffffe000`04c31550 : fffff801`508e5200 00000000`00000001 fffff801`508ecf88 fffff801`508ecee0 : 0xffffe000`04c33310
    fffff801`508ecd20 fffff801`508e5200 : 00000000`00000001 fffff801`508ecf88 fffff801`508ecee0 00001fff`fb3ccfd8 : 0xffffe000`04c31550
    fffff801`508ecd28 00000000`00000001 : fffff801`508ecf88 fffff801`508ecee0 00001fff`fb3ccfd8 00000000`00000000 : 0xfffff801`508e5200
    fffff801`508ecd30 fffff801`508ecf88 : fffff801`508ecee0 00001fff`fb3ccfd8 00000000`00000000 ffffe000`04c31550 : 0x1
    fffff801`508ecd38 fffff801`508ecee0 : 00001fff`fb3ccfd8 00000000`00000000 ffffe000`04c31550 00001fff`fb3ccfd8 : 0xfffff801`508ecf88
    fffff801`508ecd40 00001fff`fb3ccfd8 : 00000000`00000000 ffffe000`04c31550 00001fff`fb3ccfd8 fffff801`508ecee0 : 0xfffff801`508ecee0
    fffff801`508ecd48 00000000`00000000 : ffffe000`04c31550 00001fff`fb3ccfd8 fffff801`508ecee0 fffff800`02c868a7 : 0x00001fff`fb3ccfd8
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    mouclass!MouseClassServiceCallback+3d3
    fffff800`02cf8a37 488d4f20 lea rcx,[rdi+20h]
    SYMBOL_STACK_INDEX: 2
    SYMBOL_NAME: mouclass!MouseClassServiceCallback+3d3
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: mouclass
    IMAGE_NAME: mouclass.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 5215f861
    IMAGE_VERSION: 6.3.9600.16384
    BUCKET_ID_FUNC_OFFSET: 3d3
    FAILURE_BUCKET_ID: 0xc9_e_VRF_mouclass!MouseClassServiceCallback
    BUCKET_ID: 0xc9_e_VRF_mouclass!MouseClassServiceCallback
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0xc9_e_vrf_mouclass!mouseclassservicecallback
    FAILURE_ID_HASH: {a6e88987-0038-3c8a-5374-1124db171c27}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

  • Problem with threads and simulation: please help

    please help me figure this out..
    i have something like this:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class DrawShapes extends JApplet{
         private JButton choices[];
         private String names[]={"line", "square", "oval"};
         private JPanel buttonPanel;
         private DrawPanel drawingArea;
         private int width=300, height=200;
         public void init(){
              drawingArea=new DrawPanel(width, height);
              choices=new JButton[names.length];
              buttonPanel=new JPanel();
              buttonPanel.setLayout(new GridLayout(1, choices.length));
              ButtonHandler handler=new ButtonHandler();
              for(int i=0; i<choices.length; i++){
                   choices=new JButton(names[i]);
                   buttonPanel.add(choices[i]);
                   choices[i].addActionListener(handler);
              Container c=getContentPane();
              c.add(buttonPanel, BorderLayout.NORTH);
              c.add(drawingArea, BorderLayout.CENTER);
         }//end init
         public void setWidth(int w){
              width=(w>=0 ? w : 300);
         public void setHeight(int h){
              height=(h>=0 ? h : 200);
         /*public static void main(String args[]){
              int width, height;
              if(args.length!=2){
                   height=200; width=300;
              else{
                        width=Integer.parseInt(args[0]);
                        height=Integer.parseInt(args[1]);
              JFrame appWindow=new JFrame("An applet running as an application");
              appWindow.addWindowListener(
                   new WindowAdapter(){
                        public void windowClosing(WindowEvent e){
                             System.exit(0);
              DrawShapes appObj=new DrawShapes();
              appObj.setWidth(width);
              appObj.setHeight(height);
              appObj.init();          
              appObj.start();
              appWindow.getContentPane().add(appObj);
              appWindow.setSize(width, height);
              appWindow.show();
         }//end main*/
         private class ButtonHandler implements ActionListener{
              public void actionPerformed(ActionEvent e){
                   for(int i=0; i<choices.length; i++){
                        if(e.getSource()==choices[i]){
                             drawingArea.setCurrentChoice(i);
                             break;
    }//end class DrawShapes
    class DrawPanel extends JPanel{
         private int currentChoice=-1;
         private int width=100, height=100;
         public DrawPanel(int w, int h){
              width=(w>=0 ? w : 100);
              height=(h>=0 ? h : 100);
         public void paintComponent(Graphics g){
              super.paintComponent(g);
              switch(currentChoice){
                   case 0:     g.drawLine(randomX(), randomY(), randomX(), randomY());
                             break;
                   case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
                             break;
                   case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
                             break;
         public void setCurrentChoice(int c){
              currentChoice=c;
              repaint();          
         private int randomX(){
              return (int) (Math.random()*width);
         private int randomY(){
              return (int) (Math.random()*height);
    }//end class drawPanel
    That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
    case 0: drawStart(g); break;
    public void drawStart(Graphics g){
      /* something here */
    drawMain(g);
    public void drawMain(graphics g){
    g.drawString("test", x, y);
    //here's where i'm trying to pause
    //i've tried placing Thread.sleep between these lines
    g.drawLine(x, y, a, b);
    //Thread.sleep here
    g.drawRect(x, y, 50, 70);
    }I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!

    It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.

  • Query Help

    Table1:
    ou store point
    LS LIB1 50
    LS LIB1 200
    LS LIB1 100
    LS LIB1 79
    I have to insert table1 to table2 by splitting into every 143point and assing serial number for every 143 from parameter.
    in aboce example we can split 3 time 143 like below table2 sample.
    Table2
    ou store point serial_number
    LS LIB1 50 101
    LS LIB1 93 101
    LS LIB1 107 102
    LS LIB1 36 102
    LS LIB1 64 103
    LS LIB1 79 103
    i tried below procedure its not working.
    table may have any order like below.
    Table1:
    ou store point
    LS LIB1 200
    LS LIB1 50
    LS LIB1 100
    LS LIB1 79
    then table2
    ou store point serial_number
    LS LIB1 143 101
    LS LIB1 57 102
    LS LIB1 50 102
    LS LIB1 36 102
    LS LIB1 64 103
    LS LIB1 79 103
    create or replace procedure assign_serial(from_num number,to_num number) is
    bal number(10);
    begin
    bal := 0;
    for c1 in(select * from table1)
    loop
    if c1.point <=143 then
    if bal=0 then
    bal=143-used;
    insert int0 table2 values(c1.ou,c1.store,used);
    elsif used > 0 then
    used=used-bal;
    insert int0 table2 values(c1.ou,c1.store,bal);
    bal=0;
    if used > 0 then
    insert int0 table2 values(c1.ou,c1.store,used);
    end if;
    bal:=143-used;
    end if;
    end loop;
    end;
    How to split and assign serial number,please hELP.

    .after giving serial num i have to change points in table1 to 0.The problem for SUm and split for every 143 is ,different OU and store is there.we have to know for which store points we earned serial number.
    i hope this below logic little satisfy except assign cardnum,please........ check and currect the logic
    LS LIB1 50
    LS LIB1 200
    LS LIB1 100
    LS LIB1 79
    --variable used and bal
    for c1 in(select * from table1)
    loop
    used := c1.points;
    if c1.point <=143 then
    if bal=0 then
    bal=143-used;
    insert int0 table2 values(c1.ou,c1.store,used);
    elsif used > 0 then
    used=used-bal;
    insert int0 table2 values(c1.ou,c1.store,bal);
    bal=0;
    if used > 0 then
    insert int0 table2 values(c1.ou,c1.store,used);
    end if;
    bal:=143-used;
    end if;
    end loop;

  • Help my safari doesnt open and gives me a crash report

    help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1

    There is no need to download anything to solve this problem.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • Apple Mini DVI to Video Adapter is not working. Please Help...

    I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee

    right,
    ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
    i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
    please help....................

    You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
    good luck.
    x

  • PSE icons instead of the photo. I need to view photos at a glance. Please help me????

    Please help, this is driving me crazy.  I have downloaded my free PSE #9, it came with my Leica Camera.  I cannot view at a glance any of my photos.  There is only an icon that reads, PSE.  To view any of my photos, I must click select and then preview.  This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be.  I hate this!  My old Photo Shop #5 didn't do this.  When you went to my pictures, you could see every photo.
    I have tried the right click and open as any program.  What ever program I choose, that is the icon that appears.  No photo. Still no good.
    Please help.
    Thanking anyone in advance,
    Leica

    Hi,
    Are you using Windows Explorer to view the files?
    If so, load Explorer, go to the Tools menu and select Folder Options.
    Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
    Click on OK and see if that is any better.
    Brian

  • IPOD NO LONGER RECOGNIZED BY ITUNES - HELP!!!!!!!!!!!!!!!!!

    When connecting to I-Tunes my Ipod now appears only as 'IPOD'
    The Windows 'Autoplay' box appears on the left hand side of my screen.
    Everything then freezes for a short while then an error message says that I-Tunes has detected an Ipod that is corrupted.
    My Ipod itself is fine so I'm reluctant to restore if that will not solve the problem.
    Is something to do with an automatic software update?
    Please help......................
    Advent   Windows XP  

    iOS: Device not recognized in iTunes for Mac OS X
    Do not omit the additional information pararaph.

  • HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

    i have tried:
    reloading itunes
    unchecking 'write'
    removing lower filters in regedit
    ensuring i had the correct 'gear' info in the upper filters in regedit
    removing 'gear' from regedit, system32
    reloading updated version of 'gear'
    cleaning my registery
    deleting itunes
    cleaning registry again
    reloading itunes
    cleaning registry again
    i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
    i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
    when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
    the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
    and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
    the above is not the case as it also popped up for me to import cd to itunes.
    i tried to copy and past the entire contents here but it would not allow me to paste.
    please help!

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!

    I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
    Oracle installation script generates several errors. I have
    tried several attempts, using different options, but they all
    generate errors.
    Please help. The Oracle Installation scripts appear to be very
    buggy... or perhaps they are incompatible with the standard
    RedHat 6.1 release. Either way, it is very frustrating.
    I have documented one of my (failed) installation attempts below.
    Does anyone have any words of wisdom?
    I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
    a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
    2.2.12-2 kernel). RedHat was installed using the standard "Gnome
    Workstation" configuration.
    The Oralce CD is labeled:
    "Oralce 8i Enterprise Edition
    Release 8.1.5
    for Linux
    (c) Oracle Corporation 1999"
    I got this CD about one week ago at Oracle OpenWorld '99 in Los
    Angeles... it should be their "latest & greatest" version so far.
    1. Pre-Installation and ./runInstall
    I created an "oracle" Unix account w/ groups "oinstall" (the
    primary group) and "dba" (a secondary group).
    I created directories /u01 through /u04, belonging to oracle.
    I setup .cshrc and sourced it, containing:
    umask 022
    setenv DISPLAY `hostname`:0
    xhost +
    setenv ORACLE_BASE /u01/app/oracle
    setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
    setenv ORACLE_SID cprtest
    setenv PATH ${ORACLE_HOME}/bin:${PATH}
    setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
    setenv NLS_LANG US7ASCII
    I downloaded jre116_v5 and installed to /usr/local/jre.
    Finally, I executed (from the "oracle" Unix account):
    cd /mnt/cdrom
    ./runInstall
    Problem: I got the error (from ./runInstall):
    Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
    Please wait...
    Error in CreateOUIProcess(): -1
    : Bad address
    Workaround: Executed the following commands instead:
    cd /mnt/cdrom/install/linux
    ./runIns.sh
    3. runIns.sh and root.sh
    I selected the following options (from ./runIns.sh):
    Source: /mnt/cdrom/stage/products.jar
    Destination: /u01/app/oracle/product/8.1.5
    Oracle 8i Enterprise Edition 8.1.5.0.0
    Typical (585MB)
    Installable Components: Oralce Intelligent Agent 8.1.5.0.0
    Global Database Name: cprtest.parkrussell.com
    SID: cprtest
    Directory for Database Files: /u02
    Then (when instructed by ./runIns.sh), I attempted to execute
    (from the
    "root" Unix account):
    cd /u01/app/oracle/product/8.1.5
    ./root.sh
    Problem: I got the error:
    "bash: ./root.sh: Permission denied"
    The execute bit was not set.
    Workaround: I executed:
    chmod a+x root.sh
    ./root.sh
    5. Configuration Tools
    The Oracle Installer (./runIns.sh) attempted to execute:
    A. Net8 Configuration Agent
    B. Oracle Database Configuration Agent
    Problem: The "Oracle Database Configuration Agent" failed with
    the following error message:
    "One or more tools have failed. It is recommended but not
    required that these tools succeed for this installation.
    You can now select these tools, read its details to examine
    why they have failed, fix those problems, and retry them.
    Or, you can click "Next" to continue."
    When I selected the "Oracle Database Configuration Agent" for
    more info, I got the following additional details (as the cause
    of the error):
    "A required command line argument is missing."
    The log file
    "/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
    "Command which is being spawned is /usr/local/jre/bin/jre
    -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
    -classpath
    /usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
    /8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
    p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
    AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
    4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
    tcfg.jar:/usr/local/jre/lib/i18n.jar
    DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
    NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
    /seedloc NO_VALUE /sid cprtest /orahome
    /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
    /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
    /gdbName cprtest.parkrussell.com
    Invalid Exit Code. The following result code will be used for
    configuration tool: 1
    Configuration tool Oracle Database Configuration Assistant
    failed"
    Workaround: There is obviously nothing I can do to fix this
    problem. It appears to be an internal bug in ./runIns.sh.
    Therefore, I selected "Next" and executed "dbassist" directly.
    6. dbassist
    I executed:
    dbassist
    Problem: I got the following error:
    "JNLS Execution:oracle.ntpg.jnls.JNLSException
    Unable to find any National Character Sets. Please
    check your Oracle installation."
    Workaround: Press "OK" and ignore the error.
    7. dbassist (cont.)
    I selected the following options:
    Create database
    Typical
    Copy existing database files from the CD
    Global Database Name: cprtest.parkrussell.com
    SID: cprtest
    Problem: I got the following error:
    "CD-ROM drive not detected on this system.
    Database not created."
    (Note: I've been running the installation scripts from the
    CDROM drive this entire time. "df" shows the CDROM drive
    mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
    Workaround: Abort (which generated the additional error: "Unable
    to create database. DBCA-00003: No CD-ROM drive detected.") and
    run dbassist again, this time using different parameters.
    8. dbassist, again
    I executed "dbassist" again and selected the following options:
    Create database
    Typical
    Create new database files
    Hybrid
    Concurrently connected users: 5
    Options: Oralce interMedia, Oralce JServer, and iM demos
    Global Database Name: cprtest2.parkrussell.com
    SID: cprtest2
    Create database now
    Problem: I got the following error:
    "ORA-01012: not logged on"
    Workaround: Try, try again.
    9. dbassist, one last time
    Executed "dbassist" once more and selected the following options:
    Create database
    Typical
    Create new database files
    Hybrid
    Concurrently connected users: 5
    Options: Oralce interMedia, Oralce JServer, and interMedia
    demos
    Global Database Name: cprtest3.parkrussell.com
    SID: cprtest3
    Output creation script
    Then, I executed (from the "oracle" Unix account):
    cd /u01/app/oracle/product/8.1.5/install
    setenv ORACLE_SID cprtest3
    ./sqlcprtest3.sh
    Problem: I got the following output:
    "Oracle Server Manager Release 3.1.5.0.0 - Production
    (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
    Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
    With the Partitioning and Java options
    PL/SQL Release 8.1.5.0.0 - Production
    SVRMGR> SVRMGR> Connected.
    SVRMGR> ORACLE instance started.
    ORA-01012: not logged on
    SVRMGR> 2> 3> 4> 5> 6> 7>
    8> 9> CREATE DATABASE "cprtest3"
    ORA-01012: not logged on
    SVRMGR> Disconnected."
    Workaround: Beats me.
    10. sqlplus
    I attempted to execute sqlplus, but got the following error
    message:
    "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
    The execute bit was not set.
    Workaround: I executed:
    chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
    sqlplus
    I gave up for now... there were just too many things wrong with
    this installation, starting with the very first command I was
    supposed to execute (./runInstaller).
    I can't fathom why Oracle's installation script has so many bugs.
    Am I just doing something terribly wrong?
    Please help.
    null

    I'm using enlightenment version 0.15.5-41, which is more recent
    than the 0.15.5-37 version (containing the Oracle installer
    patch) that you recommended. Unfortunately, it fails when using
    this version.
    I also tried installing Oracle using twm, with enlightenment
    disabled. This didn't help either.
    Furthermore, the errors that I'm encountering in the OUI are
    not just toward the end of the installation. They happen from
    the very beginning, right after I enter "./runInstall", and
    continue every step of the way.
    Calvin Mitchell (guest) wrote:
    : Check out my thread: "Assistants Failure Toward end of Oracle
    : Install" to see where i've gone with this.
    : if your running Enlightenment as your window manager you need
    to
    : upgrade to 0.15.5-37, that will solve the OUI error.
    : Let me know if you solve any of your problems.
    : Chris Russell (guest) wrote:
    : : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
    : The
    : : Oracle installation script generates several errors. I have
    : : tried several attempts, using different options, but they all
    : : generate errors.
    : : Please help. The Oracle Installation scripts appear to be
    very
    : : buggy... or perhaps they are incompatible with the standard
    : : RedHat 6.1 release. Either way, it is very frustrating.
    : : I have documented one of my (failed) installation attempts
    : below.
    : : Does anyone have any words of wisdom?
    : : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
    : RAM,
    : : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
    : : 2.2.12-2 kernel). RedHat was installed using the standard
    : "Gnome
    : : Workstation" configuration.
    : : The Oralce CD is labeled:
    : : "Oralce 8i Enterprise Edition
    : : Release 8.1.5
    : : for Linux
    : : (c) Oracle Corporation 1999"
    : : I got this CD about one week ago at Oracle OpenWorld '99 in
    Los
    : : Angeles... it should be their "latest & greatest" version so
    : far.
    : : 1. Pre-Installation and ./runInstall
    : : I created an "oracle" Unix account w/ groups "oinstall" (the
    : : primary group) and "dba" (a secondary group).
    : : I created directories /u01 through /u04, belonging to oracle.
    : : I setup .cshrc and sourced it, containing:
    : : umask 022
    : : setenv DISPLAY `hostname`:0
    : : xhost +
    : : setenv ORACLE_BASE /u01/app/oracle
    : : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
    : : setenv ORACLE_SID cprtest
    : : setenv PATH ${ORACLE_HOME}/bin:${PATH}
    : : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
    : : setenv NLS_LANG US7ASCII
    : : I downloaded jre116_v5 and installed to /usr/local/jre.
    : : Finally, I executed (from the "oracle" Unix account):
    : : cd /mnt/cdrom
    : : ./runInstall
    : : Problem: I got the error (from ./runInstall):
    : : Initializing Java Virtual Machine from
    : /usr/local/jre/bin/jre.
    : : Please wait...
    : : Error in CreateOUIProcess(): -1
    : : : Bad address
    : : Workaround: Executed the following commands instead:
    : : cd /mnt/cdrom/install/linux
    : : ./runIns.sh
    : : 3. runIns.sh and root.sh
    : : I selected the following options (from ./runIns.sh):
    : : Source: /mnt/cdrom/stage/products.jar
    : : Destination: /u01/app/oracle/product/8.1.5
    : : Oracle 8i Enterprise Edition 8.1.5.0.0
    : : Typical (585MB)
    : : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
    : : Global Database Name: cprtest.parkrussell.com
    : : SID: cprtest
    : : Directory for Database Files: /u02
    : : Then (when instructed by ./runIns.sh), I attempted to execute
    : : (from the
    : : "root" Unix account):
    : : cd /u01/app/oracle/product/8.1.5
    : : ./root.sh
    : : Problem: I got the error:
    : : "bash: ./root.sh: Permission denied"
    : : The execute bit was not set.
    : : Workaround: I executed:
    : : chmod a+x root.sh
    : : ./root.sh
    : : 5. Configuration Tools
    : : The Oracle Installer (./runIns.sh) attempted to execute:
    : : A. Net8 Configuration Agent
    : : B. Oracle Database Configuration Agent
    : : Problem: The "Oracle Database Configuration Agent" failed
    with
    : : the following error message:
    : : "One or more tools have failed. It is recommended but not
    : : required that these tools succeed for this installation.
    : : You can now select these tools, read its details to
    examine
    : : why they have failed, fix those problems, and retry them.
    : : Or, you can click "Next" to continue."
    : : When I selected the "Oracle Database Configuration Agent" for
    : : more info, I got the following additional details (as the
    cause
    : : of the error):
    : : "A required command line argument is missing."
    : : The log file
    : : "/u01/app/oracle/oraInventory/logs/installActions.log"
    : recorded:
    : : "Command which is being spawned is /usr/local/jre/bin/jre
    : : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
    : : -classpath
    /usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
    : 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
    1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
    sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
    u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
    : cle/product/8.1.5/jlib/help-
    : 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
    4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
    1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
    : n.jar
    : : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
    : : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
    NO_VALUE
    : : /seedloc NO_VALUE /sid cprtest /orahome
    : : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
    : : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
    : : /gdbName cprtest.parkrussell.com
    : : Invalid Exit Code. The following result code will be used
    for
    : : configuration tool: 1
    : : Configuration tool Oracle Database Configuration Assistant
    : : failed"
    : : Workaround: There is obviously nothing I can do to fix this
    : : problem. It appears to be an internal bug in ./runIns.sh.
    : : Therefore, I selected "Next" and executed "dbassist"
    directly.
    : : 6. dbassist
    : : I executed:
    : : dbassist
    : : Problem: I got the following error:
    : : "JNLS Execution:oracle.ntpg.jnls.JNLSException
    : : Unable to find any National Character Sets. Please
    : : check your Oracle installation."
    : : Workaround: Press "OK" and ignore the error.
    : : 7. dbassist (cont.)
    : : I selected the following options:
    : : Create database
    : : Typical
    : : Copy existing database files from the CD
    : : Global Database Name: cprtest.parkrussell.com
    : : SID: cprtest
    : : Problem: I got the following error:
    : : "CD-ROM drive not detected on this system.
    : : Database not created."
    : : (Note: I've been running the installation scripts from the
    : : CDROM drive this entire time. "df" shows the CDROM drive
    : : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
    : : Workaround: Abort (which generated the additional error:
    : "Unable
    : : to create database. DBCA-00003: No CD-ROM drive detected.")
    : and
    : : run dbassist again, this time using different parameters.
    : : 8. dbassist, again
    : : I executed "dbassist" again and selected the following
    options:
    : : Create database
    : : Typical
    : : Create new database files
    : : Hybrid
    : : Concurrently connected users: 5
    : : Options: Oralce interMedia, Oralce JServer, and iM demos
    : : Global Database Name: cprtest2.parkrussell.com
    : : SID: cprtest2
    : : Create database now
    : : Problem: I got the following error:
    : : "ORA-01012: not logged on"
    : : Workaround: Try, try again.
    : : 9. dbassist, one last time
    : : Executed "dbassist" once more and selected the following
    : options:
    : : Create database
    : : Typical
    : : Create new database files
    : : Hybrid
    : : Concurrently connected users: 5
    : : Options: Oralce interMedia, Oralce JServer, and interMedia
    : : demos
    : : Global Database Name: cprtest3.parkrussell.com
    : : SID: cprtest3
    : : Output creation script
    : : Then, I executed (from the "oracle" Unix account):
    : : cd /u01/app/oracle/product/8.1.5/install
    : : setenv ORACLE_SID cprtest3
    : : ./sqlcprtest3.sh
    : : Problem: I got the following output:
    : : "Oracle Server Manager Release 3.1.5.0.0 - Production
    : : (c) Copyright 1997, Oracle Corporation. All Rights
    Reserved.
    : : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
    : : With the Partitioning and Java options
    : : PL/SQL Release 8.1.5.0.0 - Production
    : : SVRMGR> SVRMGR> Connected.
    : : SVRMGR> ORACLE instance started.
    : : ORA-01012: not logged on
    : : SVRMGR> 2> 3> 4> 5> 6> 7>
    : : 8> 9> CREATE DATABASE "cprtest3"
    : : ORA-01012: not logged on
    : : SVRMGR> Disconnected."
    : : Workaround: Beats me.
    : : 10. sqlplus
    : : I attempted to execute sqlplus, but got the following error
    : : message:
    : : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
    : denied."
    : : The execute bit was not set.
    : : Workaround: I executed:
    : : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
    : : sqlplus
    : : I gave up for now... there were just too many things wrong
    with
    : : this installation, starting with the very first command I was
    : : supposed to execute (./runInstaller).
    : : I can't fathom why Oracle's installation script has so many
    : bugs.
    : : Am I just doing something terribly wrong?
    : : Please help.
    null

Maybe you are looking for