DPC3825 / CAN OPEN PORT 3306 BUT NOT OTHERS

I am trying to open port 80, 3306, 30000, and 30001 .... I did everything properly, I have a static IP address, I am hooked directly to my cisco router, but when I go to this website http://www.whatsmyip.org/port-scanner/ and scan to see if my ports are open, only port 3306 shows that is open, all the other ports time out... Please help me.

Hi Bertrude,
The DPC3825 is an internet service provider (ISP) supported product. You will need to contact them or your technology reseller from where you purchased the device to assist you with your question.

Similar Messages

Downloaded certain files from my old computer on a memory stick.Have inputted stick into my new mac and can open PDF files but not xlr,aww or eps files.Is there a solution to this please?

Transferred certain files to my new Mac from my old computer via memory stick.Can open PDF files but not xlr,aww or wps ones.The important ones are in xlr format.Is there a solution please?

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor

I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor

I'm keen to know if you get a response to this. I've been running Elements 12 for a year now, and suddenly my Editor is not working. I'm running Windows 8.1 and just get a message that says "The Editor is not working". Not very helpful.

My iPhoto hangs right after it opens - i can open it remotely but not on my main machine

My iPhoto hangs right after it opens - i can open it remotely but not on my main machine

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Facebook freezes when trying to open with firefox but not other browsers, how do I fix this?

I have two users on my pc. The main user has no problem accessing facebook using his windows account and firefox browser. The second user, however all of a sudden, cannot access facebook with his windows account and firefox browser. Firefox freezes and says not responding. Other browsers, however work. I have loaded and run a windows registry repair which did not fix the problem. I have also run my virus scanning software. I cannot find an answer to this issue. Can someone please help?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Firefox opens certain websites but not others, same with google chrome and IE

Basically a day after installing sc2 my firefox started running really, really slowly and stopped opening sites that ive always opened perfectly fine before. I can open;
http://eu.battle.net + US website
http://forums.wow-europe.com/?sid=1 + US website
Teamliquid.net front page, streams load chance varied
mmochampion
No problem with these
I cannot open;
youtube
google 9/10
yahoo for my emails
Cynicalbrit.com
Xfire live
arena junkies.com
I have run spyware scanners, virus scanners, checked to make sure my net settings in firefox are fine, nothing works, restarted my router, reinstalled firefox, checked for updates, disabled all plugins, renabled some, cheeck for plug in updates...nothing works.
If anyone could help that would be awesome.

The site provides World of Warcraft services for the WoW gaming community. Your character can reach level 85 quickly and safely with our WoW Powerleveling service. While you are busy working, learning in school, or sleeping, the company can help you on: PvP Honor Points Farming, PvP Conquest Points Leveling and Personal Arena Rating , Power Leveling , Justice Points and Valor Points , Instance Dungeon Runs and Loot , PvP Honor Rewards , PvP Arena Rewards , Gold Farming , Profession Tradeskill Leveling .
http://www.yehforgames.com/

I have just recently lost use of 2 USB ports and my isight camera. I have an isight G5 imac that has been working great. I have rebooted, reloaded my OS, and tried PRAM reset. I can use my keyboard, but not other peripherals. Any ideas on diagnostics?

I have just recently lost use of 2 USB ports and my isight camera. My keyboard works fine, but there is not any indication of connections when probing USB in "About this MAC". I have rebooted, executed a PRAM reset, and reloaded my OS, but to no avail I am out 2 of my 3 USB ports. I don't know how to diagnose the issue. Any ideas?
--kevinfromflagstaff

Well, if you've tried different USB cords and devices and have reset your PRAM:
http://support.apple.com/kb/HT1379
And SMC:
http://support.apple.com/kb/HT3964
I'd say your USB ports are shot - since they are an integral part of the logic board, replacing it will most likely be expensive. I'd still go for a definitive diagnosis at the Genius Bar.

Premiere Crashes Every Time I open one file but not others???

So today I had just finished making a video which I am supposed to be entering in a competition with deadline tomorrow but just after I saved and tried to make the viewer bigger so that I could watch the whole thing back, Premiere Elements 10 crashed.
Each time it gives me this message:
[/PerforceRoot/PRE10/premiere/elements/mac/main/MediaCore/MediaLayer/VideoRenderer/Make/Ma c/../../Src/RenderFrameRequest.cpp-310]
This is what it comes up with in the problems box after Premiere Elements 'quits unexpectedly'
Process:         Adobe Premiere Elements [8298]
Path:            /Applications/Adobe Premiere Elements.app/Contents/MacOS/Adobe Premiere Elements
Identifier:      com.adobe.Adobe Premiere Elements.framework
Version:         20110902.B343.280460 (10.0)
Code Type:       X86 (Native)
Parent Process: launchd [95]
Date/Time:       2013-05-30 22:34:06.990 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          297710 sec
Crashes Since Last Report:           13
Per-App Interval Since Last Report: 708033 sec
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      451A2E34-BE87-4EC9-9D8A-B0147DA5DD85
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
What does this mean and how do I fix it?????

Charlotte Hampson
I am going to assume that you are working in NTSC.
In order to determine the present situation we need to gather information about the project set up and its computer environment. It is good that you did not encounter problems until now, but there are certain guidelines to avoid the pitfall surprises.
1. When you open your Premiere Elements 10 Mac, you need to set a project preset so that it matches the properties of your source media (or as close as you can come to them) so that the program is directed to set up the correct space in the Edit Mode Monitor from which to edit. If you do nothing but OK your way pass the New Project dialog, you end up with the default project preset, NTSC DV Standard which represents 720 x 480 4:3. That is fine if that matches the frame size and other properties of your .mp4 and .mov video.
2. When I was asking about computer resources, I was referring to installed and available RAM and free hard drive space? Your computer may not be optimized. If you have been working with a lot of projects, you may have pile ups of preview files and conformed audio in the Adobe Folder/Premiere Elements/10 (or whatever its counterpart is in a Mac setup). There are also conformed video files that may have to be cleaned out. See Edit Menu/Preferences/Media and the .mcdb files.
Is scaling in the Edit Mode Monitor the only project action that results in the program crashing?
Since you have said that everything was fine until this one particular project, I am suspecting compromised computer resources, problem with your Timeline content, and such, rather than a patch for something that never worked before.
I am not sure where it would be in the Mac directory, but see if you can find the Adobe Premiere Elements Prefs file and delete it. In Windows 7 or 8 64 bit, it is found:
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
Let us see if any of the above has any impact on your situation.
Thanks.
ATR

Can edit home page but not other pages of website. Can anyone help?

I've just installed Contribute CS5 and tried some editing of my website. I found that I can only edit the home page. When I go to the other pages the draft that is created doesn't show my images and I also can't get into the page to do anything. On top of the draft page there is something like a small logo with the letters "php" and the curser stays there. Does anyone know why that is and what I can do to make it work? And if yes, can you explain it to me as if I was 3 years old, please. Thank you.

It is pretty easy but it should be considered more of a content management system rather than a basic web editor (even though that's what it does). For example, we have 25 content posters that use Contribute. They know basically nothing about building websites so we use Contribute so that they can do limited things on the site. But it still takes us using a different tool in the background to keep the site up and running.
The unfortunate news is, unless you know PHP language, your site will be a bear to work on. It's a scripting language so, much harder than HTML.
Your site really wouldn't be to hard to rebuild in HTML if you have some experience with building websites from scratch. If you know HTML, you can use one of many low-cost HTML editors out there. If not, you'll need to use a tool like Dreamweaver but even then, it helps to know HTML in case something goes wrong and you have to dig in and find the problem.
Your other option would be to hire someone to build a new site for you. This time, let them know you will be using Adobe Contribute to work on the site so that they can put it together properly.
Not sure why it was built in PHP to begin with.
Good luck.

I have Photoshop Elements 8. I can open my organizer but NOT my editor

I tried alt ctrl shift and deleted the settings and that didn't do anything. I tried to restore my system to last week because I unsuccessfully installed a printer the other day. My computer wouldn't let me restore my system (I've tried at least 8 different times to do this). I have norton 360 and I don't know how to close out all of the antivirus things that might not be allowing my computer to restore. I even went as far as uninstalling the whole Photoshop program and re-installing it. I've been working on this for 5 hours now....please help!

Try these steps and see if it works for you:
- Go to C drive, open Program Files, open Adobe, open PSE file, open Locales file, click on en_US, open Plug In file, open import export
- Now right click on Twain_32 and choose rename, rename it to read say 1Twain_32
- Close out and launch editor again.
See if this works for you.
Thanks.

Home Share - 2 computers, can see one library but not other?

So home sharing is on on both computers, I can see the other computers library under "shared" in iTunes. However, the other computer cannot see my library.
I have tried all the firewall things, turning home sharing off and on, closing computers down and restarting.
Both are using latest version of iTunes.
The only difference between the two is my one is also synched with my iPhone/iCloud
any suggestions please?

Hey rk6547,
Great question. In my experience, the following article provides the best steps towards a resolution when troubleshooting Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thanks,
Matt M.

Why does my iPad recognise some contact names but not others I can send some messages but not others

When I try to send messages some names are recognised and some are not

If you are talking about iMessage... It will send messages to people that are using ios5, and have turned I message on on their device. For your other contacts, you need to send a good old fashioned e mail.

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

I can open some older numbers files but not others. I get a message that says I need a newer version of numbers.

I can open some older numbers files but not other. I get a message saying I need a new version of numbers. Why would some files open and not others?

SK,
Here's the deal. If you ever open a Numbers file with Version 3, the file is converted to Version 3 and can't be opened again by Version 2. Version 2 and Version 3 are undoubtedly both on your machine and they look so similar that you may not realize which you are using. So, there are two steps to getting into trouble.
1. Open a Numbers 2 file with Numbers 3, edit it and Close it.
2. Try to open that file with Version 2. You ill get the error.
To always get it right, find the file you want to open in Finder, Right-Click it and choose Open With... and pick Version 3 from the drop down list.
If you have a file that you prefer to use only in Version 2, always use Open with... Numbers 2.3.
Jerry

DPC3825 / CAN OPEN PORT 3306 BUT NOT OTHERS

Similar Messages

Maybe you are looking for