DPC3941T USB ports -- connecting USB drive for use by home network ?

Can the DPC3941T USB ports be used to connect / access USB hard drive for use by home network ?

Thanks for the prompt reply --- I had hooked it up but could never access it. COMCAST take notice --- how do I enable these USB ports for home networking use ?

Similar Messages

Trying to connect to xbox live using my home network, I need help.

I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that. If anyone could tell me what the problem is and hopefully how to fix it, it would be much appreciated.

u might to open port numbers 88 and 234 on your router
here's how to open ports
1: open IE and on the address bar, type in 192.168.1.1 and hit enter
           USERNAME: ( leave it blank )
           PASSWORD: admin ( all in lowercases )
2: click on the tab " applications and gaming "  then click on the SUBTAB port triggering.
3: you can just name the application like, box or whatever and fill in 88 for each of the boxes in the first line
4: same goes to application number 2 but you have to put 2304 for each of the boxes and pls do not forget to enable it, then save settings
5: Teset the xbox if it's now working.
6: if still not working, go to the SECURITY tab and uncheck the bock that says, " block anonymous internet requests and save settings.
7: teset xboox agan and if it still won't work
8: go to the SET UP tab and look for MTU.
9: set it to manual and lower down the size by 10.( by default, it's 1500. )→ save settings.
          Hope it will help. goodluck!

Format a networked USB drive for use with Time Machine?

I have a spare partition on an external USB drive that is attached to a Windows box on my network. Can I format this networked partition with my Mac to act as a volume for Time Machine and will TM work with the new HFS+ partition through the Windows box it is connected to? I can temporarily attach the drive to the Mac if that will help (I guess it would) but will need to return the drive to the Windows machine it normally lives with.

Gottalight wrote:
I have a spare partition on an external USB drive that is attached to a Windows box on my network. Can I format this networked partition with my Mac to act as a volume for Time Machine and will TM work with the new HFS+ partition through the Windows box it is connected to? I can temporarily attach the drive to the Mac if that will help (I guess it would) but will need to return the drive to the Windows machine it normally lives with.
There are some unsupported techniques to do this. They all use the terminal to "hack" the system and you are on your own in doing so.
Since this is beyond the limits of this forum, I suggest searching the net (as I just did) for how to do this.

Ipod Touch Won't Connect to Internet Since Using Airport Home Network

I searched the site, but can't find anything that helps (or that I can really understand). I previously had no problems with my Ipod Touch using my home internet via wi-fi. Ever since I upgraded to the newest airport, my ipod won't connect, and I've tried just about everything, but nothing works.
I also have an old PC Laptop that used to connect, but it won't connect to the internet either since I got the new airport.
Thanks for any help you can give me.
Kathy Nelson

How long did you hold the Sleep / Homes buttons for...
Try Holding them for at least 30 seconds...

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Can I use same USB drive for Intel and PPC backup?

Hi, I have a USB hdd that was used for TV recording but failed on that so I reformatted it as Mac OS extended journaled with 6 partitions (GUID), and using SuperDuper, cloned Lion from a Macbook Air and Tiger from my eMac into different partitions, with the idea of using it as an extra backup.
Tested the USB drive on Disk Utility verify disk function and it said all 6 partitions appear OK. Can boot the MBA from the USB drive (although slow) but the eMac does not show the disk image on the USB drive as an optional restart item. I have eMac backed up on a separate Firewire drive but would like to use the USB drive as a second line of defense.
My question is, would I be able to restore from the Tiger dmg on the USB drive, given that it is GUID and not Apple partition scheme. Would I have to reformat it to Apple partition scheme. Also, how would you go about a restore from the USB drive if the eMac's OS was kaput?

You can't store a clone of an Intel-based Mac and a clone of a PowerPC-based Mac on the same drive.
That's because an Intel-based Mac can start from a GUID partition table, but a PowerPC-based Mac can only start if your USB drive is using Apple Partition Map instead of GUID. In your case, you have to buy another external drive to make a clone of the PowerPC-based Mac or the Intel-based Mac.
To change the partition map of your USB drive:
1. Open Disk Utility (it's in Applications > Utilities folder), and select your USB drive in the sidebar.
2. Go to Partition tab, and press "Options" button, where you can choose the partition map you want: GUID, MBR or Apple Partition Map. Note that you won't be able to start an Intel-based Mac from a drive that uses Apple Partition Map

I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
I need some recomendations plz.

Hello,
you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
Cheers!

Where can i download a usb driver for my revere 3 (model

I have been trying to download a usb driver for my new revere 3 so I can connect with my 8.1 windows laptop. anyone have an idea where I can find it? The LG site doesn't list any drivers for it

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Cisco USB Driver for Microsoft Windows 7 PC?

Hello All,
I want a USB Driver for the USB Console cable which came up with Cisco Router.
Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
I searched on cisco.com.
Found the below link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
However, when I go to download link, it appears as "Page Not Found"
I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
Does anyone know the USB driver for this?
Thanks
Chinar

Hi Chinar-
It looks like this will work with Windows 7.
http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
DJ

I want to make a bootable usb drive for my macbook air,and my ystem is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things

I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphon

This is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

Zap the PRAM and Reset the SMC, then try again.

DPC3941T USB ports -- connecting USB drive for use by home network ?

Similar Messages

Maybe you are looking for