Dpm 2010 exchange 2010 backups are failing
Hi, I'm getting an error which does not seem to match in the DPM 2010 ID codes. Randomly, I have backups of an exchange 2010 DAG that are failing. The backup will run for a short time (5mints..up to 10minuts) and then will fail with the following error:
Type: Recovery point
Status: Failed
Description: Backup failed as another copy of 'user' database is currently being backed up. (ID 32628 Details: Internal error code: 0x80990D51)
More information
End time: 4/25/2011 10:37:27 PM
Start time: 4/25/2011 10:26:55 PM
Time elapsed: 00:10:31
Data transferred: 0 MB
Cluster node -
Recovery Point Type Incremental Sync
Source details: 06001
Protection group: EXCH2010 - 06001
I've tried restarting the DPM server to troubleshoot. I say this happens randomly because I've had some backups successfully complete against the same exchange server. The only other item that seems odd is when creating protection groups against the DAG,
the intial lookup seems to take forever. Not sure what to try next.
Hello,
As DPM relies on the exchange writer to take the snapshot for the backup, if the backupinprogress flag is set to true and it does not seem get out of this state even when there is no actual backup in place, then at this point DPM is the victim.
As far as I am aware the only way is to clear that flag is to:
a.) Reboot the exchange server
or
b.) Restart the information store
In some cases even:
1.) Either Activate all other databases on another Node except for the Problem Database, and Dismount the Problem database temporarily
Or:
1.)Dismount all Databases on this Node including the problem database
2.)Restart the Exchange Information Store Service.
3.)Mount any dismounted databases
You may want to redirect this question below to the exchange 2010 forum of:
"if the backupinprogress is set to true when it should be set to false as there really is no backup being taken, then how can I reset it without having to perform:
a.) reboot of exchange
b.) restart of the information store"
http://social.technet.microsoft.com/Forums/en-US/exchange2010/threads
Regards, Shane. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. This posting
is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
Office 2010 / Exchange 2010 - Attachments in EML-Emails are invisible
We are investigating a problem that seems to pop up with Exchange / Outlook 2010.
This is the absolutly the same problem that Clemens Wunder wrote about in his tread:
http://social.technet.microsoft.com/Forums/en-US/outlook/thread/afce3bd0-f8a4-419b-986a-0560ebff5f8f
Problem:
We got several eml-files in a Management System and those have attachmentes (word, pdf whatever) included.
If i open those EML Files in Outlook 2010 (this works if the Registry is apropriate) the Email is opening but the Attachments are "invisible"...
If i now save the Mesage from within Outlook 2010 as a MSG File and open this one the attachments are back...
I searched for bout one week now for a solution but i still don't get it why this should be happening.
My Specs:
- Windows 7
- Outlook 2010
- Exchange 2010 (migrated from 2003)
Fact:
The same problem seems also to happen with Outlook 2007 and 2003 since the migration of Exchange 2003 to 2010.
Those EML Files are from within a data management system and are stored as eml since bout 4 years.
Please don't send answers like "Use Windows Mail" - this is not a solution for this matter because I can't.
Exchange / Outlook is used at every customer of our company so WM can't be the solution...
Thanks for your advices and tips
RomanHi Roman,
To make sure I understand things correctly…..
You have EML files generated by another program. Emails have one or more attachments.
You have copied the EML files into your Outlook 2010 profile’s mail folder.
When you open the item in the folder, you have to open or save the item. –You have HKEY_CLASSES_ROOT\Outlook.File.eml.14\shell\Open\command set
to use Outlook 2010 to open the file.
When you open the EML file, the message opens but the attachments are not visible.
In actuality, when you open the EML file, Outlook is saving the file to your “..\..\Temporary Internet Files\Content.Outlook\” location.
To see what Outlook is doing I started a Process Monitor trace,
then dragged a Windows Live Mail EML message with a Word doc attached over to my Outlook 2010 Inbox.
When I open the eml item, I am prompted to Open or Save the item. I opt for Open and the message with attachment is opened with Outlook 2010.
The trace shows accessing the registry to find out what to use to open the EML file and then it shows the attached file being created in
Temporary Internet Files. The attached file is seen,
but nothing happens to it.
28:14.1
OUTLOOK.EXE QueryOpen
jahawk C:\Users\jahawk\Documents\Help me.docx
FAST IO DISALLOWED
28:14.1
OUTLOOK.EXE CreateFile
jahawk C:\Users\jahawk\Documents\Help me.docx
NAME NOT FOUND
28:14.1
OUTLOOK.EXE QueryDirectory jahawk
C:\Users\jahawk\Documents\Help me.docx NO SUCH FILE
From the opened EML file, you click File | Save As | And then save the item as an .MSG file.
When you drag the MSG into your Outlook profile’s mail folder, the mail with attachments is visible.
Looking at the mail folder, the EML item does not have a mail icon associated to it. The item shows no Attachment icon, because it cannot be
read in yet. –You’d need to open the EML file in Outlook to view the message with attachment(s).
Looking at the mail folder, the MSG item is an Outlook mail item and the attachments are showing up.
So, let me ask the following:
How was the item created?
Does this happen with any file that is attached?
In Windows Live Mail, attachments have a lot LESS properties associated to them
Outlook 2010 actually has a PR_ATTACHMENT_HIDDEN property that can toggled to hide an attachment.
What happens from Outlook Web Access? –You will have to right-click “Save Target As” on the attached eml message, first. When you
open the saved “E-mail Message” from the save location, what results?
Is your anti-virus possibly scanning the file? –“..\...\Temporary Internet Files\Outlook.content….”
Anyways, to be honest, I’d have to have a copy of the EML file to be able to (hopefully) explain what is happening.
If I had the file, I would use MFCMapi or OutlookSpy to dump the EML message’s properties after I’ve added it to my mailbox. I’d
then open it and save it as an MSG file type. From there, I’d save the MSG file’s properties off and then compare the 2 sets of properties. And, the item has an Attachment Table that will contain the attached files. Each attachment will have its
own set of properties.
From an Outlook created message with attachment, you could compare the attachment’s properties to the props on the affected message.
From a Windows Live Mail message with attachment, you could compare the attachment’s properties to the props on the affected message.
For the kind of troubleshooting we'd need to do, I would suggest calling and opening a support incident with us. That would allow us to work with you
at a much deeper level. For a case like this, a debug trace of opening the message from in Outlook 2010 would likely be necessary.
Sorry I didn’t have better information for you.
Jahawk MSFT -
I am running Oracle 7.3.4.4 on Compaq Tru64 and Digital Unix 4.0F. Our hot backups are failing with the following errors:
1)from $OBK_HOME/bin/backup_PROD.log
EBU-3135: SQL error during:
select state from obk_bfs where bfsid = :objid and jobid = :jobid
with error:
ORA-03113: end-of-file on communication channel
on 20-AUG-02 01:59 [ 29701 : brsupiopn ]
EBU-3135: SQL error during:
select state from obk_bfs where bfsid = :objid and jobid = :jobid
with error:
ORA-01041: internal error. hostdef extension doesn't exist
on 20-AUG-02 01:59 [ 29701 : brsupiclo ]
2)from brd.log:
Instance Manager (BRD) with pid=32158 successfully started on 20-AUG-02 00:59
EBU-3135: SQL error during:
/* Obtain all jobs that are currently running s[0] */ ...
with error:
ORA-03113: end-of-file on communication channel
on 20-AUG-02 01:59 [ 32158 : brsupiopn ]
EBU-3108: Query error reported from Catalog Database
on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
EBU-1504: Error while retrieving active jobs from Catalog Database
on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
We are running Oracle7 Enterprise Backup Utility: Release 2.2.0.6.0. I have tried to reboot both target and catalog databases and machines and still no luck. Anybody have any ideas as to what may be wrong?
Thanks,
Bea Cary
Database AdministratorI am running Oracle 7.3.4.4 on Compaq Tru64 and Digital Unix 4.0F. Our hot backups are failing with the following errors:
1)from $OBK_HOME/bin/backup_PROD.log
EBU-3135: SQL error during:
select state from obk_bfs where bfsid = :objid and jobid = :jobid
with error:
ORA-03113: end-of-file on communication channel
on 20-AUG-02 01:59 [ 29701 : brsupiopn ]
EBU-3135: SQL error during:
select state from obk_bfs where bfsid = :objid and jobid = :jobid
with error:
ORA-01041: internal error. hostdef extension doesn't exist
on 20-AUG-02 01:59 [ 29701 : brsupiclo ]
2)from brd.log:
Instance Manager (BRD) with pid=32158 successfully started on 20-AUG-02 00:59
EBU-3135: SQL error during:
/* Obtain all jobs that are currently running s[0] */ ...
with error:
ORA-03113: end-of-file on communication channel
on 20-AUG-02 01:59 [ 32158 : brsupiopn ]
EBU-3108: Query error reported from Catalog Database
on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
EBU-1504: Error while retrieving active jobs from Catalog Database
on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
We are running Oracle7 Enterprise Backup Utility: Release 2.2.0.6.0. I have tried to reboot both target and catalog databases and machines and still no luck. Anybody have any ideas as to what may be wrong?
Thanks,
Bea Cary
Database Administrator -
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
Hello Experts,
Database backups are failing due to compatibility issue, The target database version is 10.2.0.1., therefore the RMAN version is running on 10.2.0.4.0, i have no idea how that was happened and who has did that before, now i have to take of this issue .. could you please give me suggestions on how to bring RMANback to 10.2.0.1 version.Hello Marcus,
Thank you for the update..
here is the output of RMAN
=====================================================
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Jun 3 09:19:38 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN> connect target *
2> run {
3> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
4> CONFIGURE CONTROLFILE AUTOBACKUP ON;
5> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'E:\Oracle\testdb\backup\cf_%d_%F';
6> CONFIGURE BACKUP OPTIMIZATION ON;
7> CONFIGURE DEVICE TYPE disk PARALLELISM 3;
8> CONFIGURE DEFAULT DEVICE TYPE TO disk;
9> CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT 'E:\Oracle\testdb\backup\b_%d_%U';
10> CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT 'E:\Oracle\testdb\backup\b_%d_%U';
11> CONFIGURE CHANNEL 3 DEVICE TYPE DISK FORMAT 'E:\Oracle\testdb\backup\b_%d_%U';
12>
13> BACKUP DATABASE PLUS ARCHIVELOG DELETE INPUT;
14> }
15>
16> ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK;
17> CROSSCHECK BACKUP;
18> DELETE NOPROMPT EXPIRED BACKUP;
19> DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
20> CROSSCHECK ARCHIVELOG ALL;
21> DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;
22> DELETE FORCE NOPROMPT OBSOLETE;
23>
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not current
connected to target database: TEST(DBID=123412352)
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 06/03/2013 09:19:41
ORA-06550: line 1, column 2273:
PLS-00302: component 'GETRANGEALBACKUP' must be declared
ORA-06550: line 1, column 2238:
PL/SQL: Statement ignored
ORA-06550: line 1, column 2453:
PLS-00302: component 'RESTORECMD_T' must be declared
ORA-06550: line 1, column 2424:
PL/SQL: Statement ignored
Recovery Manager complete. -
As my computer is telling me my backups are failing why is this happening and what do I do?
What do I do when my computer tells me that my backups are failing and why is this happeneing?
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressingcommand-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Outlook 2010 / Exchange 2013: The operation failed. An object could not be found.
Both KB2956128 and KB2956203 causing issue. Removing the patch fixes the issue. I need to know what the best way to remove the patch remotely is. Maybe a SCCM job with this:
msiexec /I {90140000-0012-0000-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
msiexec /i {90140000-001A-0409-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
Please advise. Also looking for time frame for a fix to be published or these updates are rolled back/pulled by Microsoft. Thank you.
Also this is being reported by multiple people with no resolution. Example:
http://community.spiceworks.com/topic/790986-outlook-2010-bug-the-attempted-operation-failed-an-object-could-not?page=1Hi,
Thank you for your feedback and apologize for the inconvenience caused.
We have heard several reports regarding issues caused by KB2956128. We've escalated this issue, but we're not sure whether and when there will be an hotfix for this issue. Please look out for our official blog articles and install
all available updates released.
Thanks for your understanding and support.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I've got an SBS2003 box that has limited drive space. Aside from the latest Exchange 2003 updates are there any that are absolutely necessary for joining a 2012 R2 DC and Exchange 2010 environment?
I want to keep the updates on the SBS box to an absolute minimum.Hi:
If your doing a MS migration, the before migration tests should be your guide.
Suggesting it might be better to approach this from the other side. Freeing up space on the SBS 2003 to enable the updates might be a better approach.
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/SBS_Small_Business_Server/A_4475-SBS-2003-System-Drive-Space.html?sfQueryTermInfo=1+30+fl+flyfish
while written for SBS 2008, much of this applies:
http://blogs.technet.com/b/sbs/archive/2010/03/02/recovering-disk-space-on-the-c-drive-in-small-business-server-2008.aspx
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
Outlook 2010 + Exchange 2010 keeps asking for credentials - Please Help!
Hello All,
Recently after a Windows Update + restart of my Exchange Server I'm having an issue with Outlook 2010 where it continually asks for credentials. Every 5 minutes or so the credentials popup appears and either typing your password or clicking cancel will make
Outlook work as expected again until the next popup, frequency of popups is about 2-5 minutes give or take. I am using Exchange 2010 on Server 2008 R2 and aside from the popup everything is working as expected. This seems to be effecting almost all users.
Some things I've tried already include:
- Removing any saved credentials on computer
- Removing and recreating Outlook Mail Profiles
- Running "Set-AutodiscoverVirtualDirectory -Identity 'autodiscover (default Web site)' -WindowsAuthentication $true -BasicAuthentication $false" in shell to disable basic authentication for autodiscover
- Running "get-outlookanyhwere | set-outlookanywhere -ClientAuthenticationMethod NTLM -IISAuthenticationMethods NTLM" in shell to ensure that outlook anywhere and IIS are using NTLM authentication
- Ensuring that the OAB folder permissions are set to allow Authenticated Users to Read/Execute
Anyways, if anybody has additional suggestions for me I'd very much appreciate them. Many users are using the Web App for the time being (with no issues) since the credentials popup is too annoying for them.So I made sure that all of my authentication methods match the settings you linked me and then recycled the app pool you mentioned but am still having the issue.
One thing I noticed is that if a user experiencing the problem types their password into the credentials popup it will keep popping up continuously but if they hit cancel it says "Needs Password" where it would normally say "Connected to Microsoft Exchange"
and if they simply click once where it says "Needs Password" then all of a sudden it switches to "Connected to Microsoft Exchange" again and they no longer see the popup until Outlook is restarted.
Just to verify I have the proper settings now this is what shell returns:
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | fl *auth*
CertificateAuthentication :
InternalAuthenticationMethods : {Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : False
DigestAuthentication : False
WindowsAuthentication : True
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory | fl *auth*
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
Do you have any additional suggestions that I can try? From what I can tell my authentication methods all match the default settings now.
Edit: As soon as I changed EWA to just Basic Authentication as it says in the linked default settings I would get an error when trying to browse to the EWA that said "Outlook failed to initialize" and re-adding the Windows Authentication, then running iisreset
fixed the issue. Therefore EWA is the only service with non-default authentication methods now. -
Hi Gurus,
We are taking the backup of Essbase application files like .tct, .pag, .ind, .esm, .db. .dbb files, we are facing some issue with the backups from last few days like .esm, .tct, .pag and .ind files are failing while exporting them using windows NT batch. With an error message as these files are used by some other process. where as i am checking in applicaion event logs i found no process are running at that time..
please let me know what are the process(like dataloading, running calculations) will restrict these files to export.
Thanks in advance.Look ty my MAXL BAckup script (for example )
msh $vWorkDir/ess/_login.mxl ;
spool off ;
shell mkdir $vBackupFolder ;
shell mkdir $vBackupFolder/$vCurrApp ;
shell mkdir $vBackupFolder/bin ;
spool on to "$vBackupFolder/$vLogFileName.$vCurrApp.mxl" ;
set vDbFolder = $ARBORPATH/app/$vCurrApp/$vCurrDB ;
set vBinFolder = $ARBORPATH/bin ;
iferror 'ExitError';
/* Unload Level 0 data */
alter database $vCurrBackAppDB enable cache_pinning;
iferror 'ExitError';
alter system logout session on application $vCurrApp force ;
alter system logout session on application $vCurrApp force ;
alter system logout session on application $vCurrApp force ;
iferror 'ExitError';
alter application $vCurrApp enable startup ;
iferror 'ExitError';
alter application $vCurrApp enable commands ;
iferror 'ExitError';
alter application $vCurrApp enable updates ;
iferror 'ExitError';
alter application $vCurrApp enable connects ;
iferror 'ExitError';
alter application $vCurrApp enable security ;
iferror 'ExitError';
alter system load application $vCurrApp ;
iferror 'ExitError';
alter application $vCurrApp load database $vCurrDB ;
iferror 'ExitError';
alter system logout session on application $vCurrApp force ;
alter system logout session on application $vCurrApp force ;
iferror 'ExitError';
export database $vCurrBackAppDB all data to data_file "$vBackupFolder/$vCurrApp.$vJobNumber.all.txt" ;
iferror 'ExitError';
export database $vCurrBackAppDB level0 data to data_file "$vBackupFolder/$vDb.level0.txt" ;
export database $vCurrBackAppDB input data to data_file "$vBackupFolder/$vDb.input.txt" ;
/* ShutDown Applications */
drop lock on system all ;
iferror 'ExitError';
alter application $vCurrApp disable startup ;
iferror 'ExitError';
alter application $vCurrApp disable commands ;
iferror 'ExitError';
alter application $vCurrApp disable updates ;
iferror 'ExitError';
alter application $vCurrApp disable connects ;
iferror 'ExitError';
alter application $vCurrApp disable security ;
iferror 'ExitError';
alter database $vCurrBackAppDB unlock all objects ;
iferror 'ExitError';
alter system logout session on application $vCurrApp force ;
iferror 'ExitError';
alter application $vCurrApp unload database $vCurrDB ;
iferror 'ExitError';
alter system unload application $vCurrApp ;
iferror 'ExitError';
/* copy system binary files */
shell cp $vBinFolder/\*.sec $vBackupFolder/bin 1>/dev/null 2>/dev/null ;
shell cp $vBinFolder/\*.cfg $vBackupFolder/bin 1>/dev/null 2>/dev/null ;
shell cp $vBinFolder/\*.sh $vBackupFolder/bin 1>/dev/null 2>/dev/null ;
shell cp $vBinFolder/\*.ini $vBackupFolder/bin 1>/dev/null 2>/dev/null ;
/* copy applications binary files */
shell cp $vDbFolder/\*.otl $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.rul $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.txt $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.csc $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.db $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.dbb $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.ind $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.pag $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.esm $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/\*.tct $vBackupFolder/$vDb 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/../\*.app $vBackupFolder/ 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/../\*.apb $vBackupFolder/ 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/../\*.xml $vBackupFolder/ 1>/dev/null 2>/dev/null ;
shell cp $vDbFolder/../\*.jar $vBackupFolder/ 1>/dev/null 2>/dev/null ;
shell mkdir $vBackupFolder/scripts ;
shell cp $vWorkDir/\* $vBackupFolder/scripts/ 1>/dev/null 2>/dev/null ;
shell mkdir $vBackupFolder/scripts/ess ;
shell cp -r $vWorkDir/ess/\* $vBackupFolder/scripts/ess 1>/dev/null 2>/dev/null ;
/* Deleted tempory files */
shell rm -f $vDbFolder/\*.otn ;
shell rm -f $vDbFolder/\*.inn ;
shell rm -f $vDbFolder/\*.esn ;
shell rm -f $vDbFolder/\*.pan ;
shell rm -f $vDbFolder/\*.tcu ;
shell rm -f $vDbFolder/\*.esn ;
shell rm -f $vDbFolder/\*.pan ;
shell rm -f $vDbFolder/\*.inn ;
shell rm -f $vDbFolder/\*.tcu ;
shell rm -f $vDbFolder/\*.otn ;
/* RESTRUCTURE applications */
alter database $vCurrBackAppDB enable cache_pinning;
iferror 'ExitError';
alter application $vCurrApp enable startup;
iferror 'ExitError';
alter application $vCurrApp enable commands;
iferror 'ExitError';
alter application $vCurrApp enable updates;
iferror 'ExitError';
alter application $vCurrApp enable connects;
iferror 'ExitError';
alter application $vCurrApp enable security;
iferror 'ExitError';
alter system load application $vCurrApp ;
iferror 'ExitError';
alter application $vCurrApp load database $vCurrDB ;
iferror 'ExitError';
alter database $vCurrBackAppDB force restructure ;
iferror 'ExitError';
define label 'ExitError';
/* Start applications */
alter database $vCurrBackAppDB enable cache_pinning;
alter application $vCurrApp enable startup;
alter application $vCurrApp enable commands;
alter application $vCurrApp enable updates;
alter application $vCurrApp enable connects;
alter application $vCurrApp enable security;
alter system load application $vCurrApp ;
alter application $vCurrApp load database $vCurrDB ;
logout;
/* Create Archives */
shell cp "$vBackupFolder/$vLogFileName.$vCurrApp.mxl" "$vWorkDir/log/bck/$vLogFileName.$vCurrApp.mxl" ;
shell cp "$vBackupFolder/$vLogFileName.$vCurrApp.err" "$vWorkDir/log/bck/$vLogFileName.$vCurrApp.err" ;
shell tar --remove-files -cz -f $vBackupFolder.tar.gz $vRelativeBackupFolder ;
shell rm -r $vBackupFolder ;
shell scp $vBackupFolder.tar.gz oracle@hypdb:~/backup & ; -
For a couple of years I've had LR set to ask to back up every day. It still tries to, but about 3 weeks ago it began failing to be able to back up. The "checking catalog integrity" box stays up for a long time (maybe a minute) and maybe the process doesn't even succeed because then that box is replaced by this error message.
I never changed anything about folder permissions and the drive has plenty of free space. (It's my internal drive, which only has a few files and my apps on it; I save most of my files to an EHD.) Choosing a different back up folder gives the same error message. About a week ago I upgraded to OS X Yosemite on my Mac, but the problem persisted exactly the same.
Please can someone help?Thank you for the quick reply. It didn't work though.
I looked in Finder at the folder where my backups were being stored and it still says "read and write" under privileges.
And I found the disk utility and the button that said "repair permissions" and clicked on that. It took a few minutes and showed many results about other things but not Lightroom. I copied it and saved it in case that would be useful. Let me know; I won't post it now because it's long.
Unfortunately, even after restarting my computer, Lightroom is still failing to back up, giving the same error message as I posted above.
Anything else I can do?
Would a screen shot of the folder where my Lightroom backups are stored help? Next to the Backups folder, which I created 2 years ago, I notice another folder called "Corrupt Catalogs" which I don't think I made myself. According to file info, it was created December 18, 2013. It has 5 catalogs in it, the latest dated July 13, 2014. I have no idea if this is related to my backup problem; just mentioning it just in case.
As for the Backup folder, it has 3 backups in it dated 9/30, 10/02, and 10/05. -
Outlook 2010 Exchange 2010 Read Receipt Request for all emails cannot be switched OFF.
I have a strange situation with an Outlook 2010 client using Exchange 2010. The user has Outlook configured so that Under Options/Mail/Tracking - that "Read receipt confirming the recipient has viewed the message" is turned off. Yet everytime she
sends a message, the option to request pops up on the recipient's outlook.
I have tried to toggle the option on and off to no avail. I can switch the Delivery Receipt request on and off and it is no issue.
Can anyone tell me what attribute in ADSIEdit or Exchange is that seems to be stuck ON?Hi,
I believe you would like to block this only for the user and not for your ORG... ??
Although, you can block this for your entire ORG.
what happens is that the Read receipt contains a "Disposition-Notification-To"
If we get rid of this header we can restrict the receiver to get that prompt.
we can create a Transport rule either for the entire org or for that specific user by making an adjustment in the "exception tab"
for more info refer this blog.
http://blogs.technet.com/b/exchange/archive/2011/02/23/3412028.aspx
Thanks & Regards
John Chris -
Lately my time machine backups have been failing because "...the sparsebundle is already in use." What does this mean, and how can I fix it?
What does this mean
It means that there are bugs in the Time Machine software
how can I fix it?
A rather complex procedure....
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the the back of the Time Capsule -
RMAN - Backups are failing *URGENT*
Hi,
I have a 2 10g DB (CM and ODSPROD) on HP-UX B.11.23 and both are on the same box and I have configured different script for individual DB on that BOX
till yesterday the backups were working fine but today it errored as follows:
run
allocate channel c1 type 'SBT_TAPE';
send 'NB_ORA_POLICY=ODSPROD1_RMAN,NB_ORA_SERV=QUEBACKUP';
backup database format 'backup_of_%d_%s_%D_%M_%Y' plus archivelog format 'arch_of_%d_%s_%D_%M_%Y';
restore validate database;
++++++++++++++++++++++++++++++
run
allocate channel c1 type 'SBT_TAPE';
send 'NB_ORA_POLICY=ODSPROD1_RMAN,NB_ORA_SERV=QUEBACKUP';
backup database format 'backup_of_%d_%s_%D_%M_%Y' plus archivelog format 'arch_of_%d_%s_%D_%M_%Y';
restore validate database;
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 04/21/2009 22:24:17
ORA-19513: failed to identify sequential file
ORA-27206: requested file not found in media management catalog
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 04/21/2009 22:52:14
ORA-19513: failed to identify sequential file
ORA-27206: requested file not found in media management catalog
Let me know if you require any info in this regards.as others have said this is a netbackup media manager error. To be honest though the most likely cause is a bad tape. I still prefer if you've got the space, and I'd hazard a guess that you have since you are backing up the database and archivelogs all in one go by the looks of it, to backup to disk and then let the tape backup pickup the backupsets
Niall -
Retention Policy Tag on Outlook 2010/Exchange 2010 SP3
While I still wanted to have the Retention Policies and Tags applied to mailboxes, would I just be able to "HIDE" or "SUPPRESS" the Tip that the Outlook 2010 client shows on the read-pane like...
Retention Policy: xx Days Retention Inbox (xx days) Expires x/x/xxxx ??
Please suggest
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, SivaHi,
When a retention policy is applied to an item in user's mailbox, the retention policy for a message appears in the header in the Reading Pane under the recipient names and includes the expiration date. If no retention policy is applied, no information appears
under the message recipient names.
Based on my knowledge, I'm afraid there is no way to hide it in the Reading Pane.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Maybe you are looking for
-
My Desk top recenntly had a new hard drive installed. I a m trying to move music from my IPhone (4s) to my itunes account which house all of my music previously. Itune will only let me move purchased songs. Can you move all of your music from phon
-
I am getting an Error in CO13 while cancelling conformation
Dear Gurus , I am getting a error while i am cancelling the Conformation . I have copied the error message below . Can anybody help me out for the same . Error Message : Confirmed activity must not be smaller than 0 (check entry
-
Problem in transporting a z table
i have added new fields to my z table and created a transport request. but when i transport the changes are not reflecting in the target system. how best can i transport a z table
-
Returning Broken iPod Classic for new Product
I have a defective 30GB iPod classic. I bought a new one, but still have the old one. Will Apple take the old one as part of a trade in for a new product?
-
All SAP Gurus, How we can define the one plant as a vendor to another plant, both are under same company code? Regards