DPM 2010 How to use autoloader tape library

Dear Team
Hello All,
We have implemented the DPM 2010 successfully in our organization. But while creating the protection group it shows the tape library name but not the individual tapes. 
So, our requirement is as below.
We want to create the daily backup in one tape. and weekly backup in another tape.
How we can select the specific tape Slot in library for different backup?
An early response will be highly appreciated.
Regards
Selvaraj.S
[email protected]

Hi,
DPM has a flat tape handling model and does not provide the direct ability to assign certain tapes or slots to specific backup jobs.   Depending on the retention period of the two goals, DPM should use separate tapes by default.  You have
some control by tweaking the TapeWritePeriodRatio and ExpiryToleranceRange settings.
See the following resources for more information on the above parameters:
Enabling Data Co-Location on DPM
http://technet.microsoft.com/en-us/library/ff399230.aspx
http://blogs.technet.com/b/dpm/archive/2012/05/14/things-you-can-do-to-help-data-protection-manager-utilize-your-tapes-full-capacity.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • Is it possible to use LTO tape library as an Archive Device

    Is it possible to use LTO tape library as an Archive Device in Final Cut Server System?
    Does it requires any additional hardware/software? Is there any recommendations available?

    HI Daro, you might want to look at TolisGRoup's impending BRU "Producers edition" http://www.tolisgroup.com/products/macosx/pe/.
    I believe they are looking to have these interfaces to some of the  pro-apps. [Will stand corrected].
    Whatever the archiver.app, it needs to know where the objects start and end on the data tape volume (e.g Ultrium LTO4]. THis is simply done by knowing the BLOCKID ofthe first block of the file(s) that have been archivied on the tape (this was retrieved when the ARCHVE operation was done via RED BLKID cmd). This is simplest form. That way the software can "+LOCATE BLOCK scsi tape cmd+" to that spot on that tape volume using HIGH SPEED SEARCH and read in what it needs.
    Some rather spiffy .apps like SGL's FLASHNET for OSX and others (DIVARCHIVE on windows) will resolve a TCR to a location DATA TAPE volume based on the known codec or in SGL's case, the interface through it's MXF archive implementation. This could be very hand for large high bitrate objects. .
    I am waiting for this myself. It is currently in BETA.
    Contact Tolisgroup and see what the status is of BR PE. http://www.tolisgroup.com/products/macosx/pe/
    HTH
    w

  • How to use multiple tape drive for single filesystem on single client.

    Hello All.
    I want to backup single filesystem with multiple tape drive.
    Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
    Backup client has a  single backup filesystem like /data1  directory with 4 LTO6 drives.
    /data1 directory doesn't have a sub-direcotry, just present a files.
    If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
    Please anybody answer the questions.
    Thanks advanced.

    See how to use multiple tape drive from single client when I want to backup single filesystem?

  • How to Create Virtual Tape Library for RHEL 5.4

    Hi,
    We are planning to use a tape library (well, as our team proposed) so we are trying to create a Virtual Tape Library as a proof of concept on this project. Can you help us create virtual tape libraries using raw devices.
    We will be using Virtual Box as our virtualization environment which will run RHEL 5.4. Will this be possible?
    Thanks and hope you can give us some ideas.

    I tried the exact same setup and it is possible. What you will need is mhvtl and Oracle OSB to get a Oracle Media Management Library (MML).
    Please see Integration of RMAN with virtual tape library
    The link above should provide the setup info you will need. There were some initial problems, but according to follow up posts later versions of the products seem to have fixed the issues with tape handling.

  • How to use a native library packaged in a connector

    Hi,
    I know how to package a native library into a connector in my app server. But I don't quite know how to use it. Suppose I provide a wrapper java class for the native library, can I use the java class directly in my EJB (since the classloader of the RA is the parent of the EJB classloader) or I have to issue an outbound call?
    Thanks,
    Haitao

    Thanks Vidyut! You've answered my question.
    I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
    Currently, my web.xml is as follows and it doesn't work.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <taglib>
    <taglib-uri>http://abc.com</taglib-uri>
    <taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
    </taglib>
    </web-app>
    Thanks again!
    Joe

  • How to use a native library (.so) in EJB

    Hi,
    I know how to package a native library into a connector in iAS. But I don't quite know how to use it. Suppose I provide a wrapper java class for the native library, can I use the java class directly in my EJB (since the classloader of the RA is the parent of the EJB classloader) or I have to issue an outbound call?
    Also, if I package the native library into a RA (standalone), iAS will automatically load it so in my wrapper java class, I don't have to call System.loadLibrary(...). Correct?
    Thanks,
    Haitao

    Thanks, Russ. My older Mac Pro is a 2,1 -- I think I only missed by a few months in buying one that would run Mavericks (64 bit EFI).  I do intend to buy a "trashcan" Mac Pro but not just yet.
    As for updating projects — that's my issue, I think. The Mac Pro and the laptop are networked so I can be working on my laptop and go to the Mac Pro and open the Final Cut Pro that is resident on that computer. What is odd is that it doesn't open any of the projects that normally open up with I start up FCP X on the Mac Pro.
    I frequently work inside the house on my laptop running programs that are on my Mac Pro outside in my office — usually no problem at all with Adobe applications. 
    FCP X won't let me open a project by clicking on the project — it insists that I "Open projects from within FCP X" but they won't open that way.  This what is odd — that it won't let me open projects even thought they are fully native to that version of FCP and are even on the same hard drive on the Mac Pro.

  • How to Use a Binary Library

    Hi,
    I am trying to use a binary library (Xerces 2.9.0). I would like to know if there is a way to use this library by putting it in my project path and using an import statement to do so. I did this with a version of entagged and placed it in "lib\\entagged" (where my compiled classes are located) and used the folder hierarchy:
    import lib.entagged.*;Is it possible to do the same with a binary package as in the image linked here:
    http://img251.imageshack.us/img251/441/xercesnm4.jpg
    This would make it easier to compile and use across multiple computers...
    Thanks in advance

    Thanks Peter for the reply
    Peter__Lawrey wrote:
    you are not looking for a standard binary searchI'm not using a binary search in the very common I'm searching for a particular key sense, which is the Collections.binarySearch sense. But binary searches are used in other situations as well. In this case I'm finding a local maximum of a function, I could also be solving f(x)=0... is there a nice generic way to handle other uses of binary search that anyone knows of?
    I would just copy the code from Collections.binarySearch and modify itI have this thing about reusing; just can't bring myself to do that :)
    It would be quicker and more efficient than trying to shoe horn a solution which expects a trinary result.Not sure I understand the last bit. Are you referring to my bastardised compareTo method with only two results? If so, I know, it is ugly! I don't see how it could be less efficient though???
    Thanks,
    Andy

  • How to use Cache Management Library (CML) for custom applications?

    Hello,
    We are planning the migration of multiple applications (J2EE, Portal, Web-Dynpro for Java) from 7.01 to 7.3 and we would like to replace some custom cache implementations with a central cache management provided by the SAP Web-AS Java.
    Several SAP standard services (e.g. UME, Configuration Manager, Scheduler) seems to use the "Cache Management Library" (CML):
    [http://help.sap.com/saphelp_nw73/helpdata/en/4a/f833eb306628d2e10000000a42189b/frameset.htm]
    Such caches can be monitored using SAP Management Console (AS Java Caches).
    Portal Runtime (cache_type=CML) and Web Page Composer can also be configured to use CML:
    [http://help.sap.com/saphelp_nw73/helpdata/en/49/d822a779cf0e80e10000000a42189b/frameset.htm]
    [http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/13/76db395a3140fcb17b8d24f5966766/frameset.htm]
    So our questions:
    How to use CML for custom applications?
    Is there any example or documentation available?
    Kind Regards,
    Dirk

    Thanks Vidyut! You've answered my question.
    I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
    Currently, my web.xml is as follows and it doesn't work.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <taglib>
    <taglib-uri>http://abc.com</taglib-uri>
    <taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
    </taglib>
    </web-app>
    Thanks again!
    Joe

  • How to use the activation library on SAP J2EE Engine

    Hi my friends:
       This post is referent to a note and their solution, but the solution is not clearly:
    Symptom:
    One wants to use the activation library provided together with the j2ee engine from an own library.
    Reason and Prerequisites:
    One wants to use the activation library from an own library but a ClassNotFound Exception or a NoClassDefFoundError keeps showing up.
    Solution:
    For J2EE Engine 6.30/6.40:
    To avoid the above mentioned exceptions one has to specify circular references between the activation library and the specific resource. When the engine's classloading system sees such references it creates a common loader for these resources and avoids the issue.
    Some one knows how to do circular references in my program????,
    i can use web applications or web dynpro with SAP Developer Studio Kit.
    thnsk Forum
    Joshua

    Hi,
    This is the info from help.sap.com on libraries and how provider.xml sjould look like:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/16/df813e77d46245e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/2ade3fc6c6ec06e10000000a1550b0/content.htm
    this is the dtd:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/09/5d963be736904c96cbdfe93793eb42/content.htm
    The file itslef is located in the library archive in server folder usually.
    I hope this helps.
    Greetings, Myriana

  • How to use sap.me library in openUI5.

    HI All,
    Can i use sap.me library in openUI5.
    I mean how to use data-sap-ui-libs='sap.m', 'sap.me' in openui5 resources.
    thanks in advance
    ravi varma.

    thanks for quick replay Chandra,
    do we have any alternative for using sap.me.Calendar
    As we have sap.me.Calendar in latest ui5 version(1.20.3) sdk.

  • How to use third party library (like .dll and .lib files) in flascc?

    I have a number of .dll and .lib files of the  third party library, which are generated from C++ code.
    I read about flascc on other web site says:
    "If you want to use third party library in your Flascc project,you must have either the source code or the linkable file which is compiled of the third party library   "
    Dose the linkable file mean .dll file or .lib file?
    AND
    How can I use the fuctions in them in my flascc project.?

    Native code is not interchangeable between platform.
    It means that you can't use library that wasn't build specifically for flascc.
    And when they say linkable files they mean libraries compiled for flascc, not any libraries.
    So if your libs are for windows, no luck, you have to recompile everything

  • How to use multiple tape drive from single client when I want to backup single filesystem?

    Hello All.
    I want to backup 1 filesystem using 4 tape drives for reducing backup time.
    In case of symantec veritas netbackup, they can user "NEW_STREAM" for multi-streaming backup.
    Please anybody let me know that how to do use multiple tape drive for single client.
    1. Backup Source server : Linux (1 client)
    2. Backup Soucre :      /data1  (500GB)
        -> Current directory structure doesn't have sub directory under /data1, just files present under /data1
    If direcotry struceture has a sub-direcotry like( /data1/aaa, /data1/bbb ), Is it availble to use multiple tape drives?
    3. Tape Drive with OSB : LTO6 * 4 drives
    Thank you.

    You would have to create a different dataset for each sub-folder. If you only have files at the top level folder then even the NEW_STREAM option couldn't be used to split the job.
    Organise it into folders and then create datasets in a client folder such as :
    /usr/local/oracle/backup/admin/config/dataset/Linux/data1_aaa
    /usr/local/oracle/backup/admin/config/dataset/Linux/data1_bbb
    Then in the schedule you just specify the Linux folder. In each dataset you list the hostname and the folder name, such as :
    include host Linux
    include path /data1/aaa
    Now it will create a new job for each dataset and therefore each folder.
    Thanks
    Rich

  • How To Use The Same Library - MacBook Pro's And Windows XP Pro?

    Background:  I have a fully configured MacBook Pro running OS X 10.8.3. Also, I run Windows XP Pro SP3 using Parallels Desktop. My primary iTunes Library and all content is stored on an external hard disk and the iTunes is "pointed" to that location by setting the iTunes' Preferences' Advanced Settings to the full path where the Library is located. Everything I have inside iTunes works perfect - the size if the Library is over 225GB!
    BUT, when I install and use iTunes on my Windows XP Pro operating system (under Parallels), the contents of the Library SEEMS to work okay (while I'm in Windows) but the Windows' iTunes Library location in Preferences' Advance Tab is NOT THE SAME LOCATION AS IS THE MAC's LIBRARY LOCATION! It is not at the same location as my main/primary iTunes Library is "pointed to".
    The problem occurs when I close Windows and return to the Mac OS X and then try to use my primary iTunes. All of the contents (and any content) within iTunes no longer work! When I attempt to play ANY song, movie, TV show, music video, audiobook, etc., a message pops up saying in effect "Location of 'x' can't be found, do you want to locate it?" I can then click 'yes' and navigate to the Library file that contains the song's file and it will then play fine, as it should. BUT, ONLY THAT SINGLE SONG WILL WORK - THE REMAINING 225GB STILL DON'T WORK!!!
    So, I am forced to go into iTunes' Preferences' Advanced tab and click on "Change Location" then navigate to the proper library file (NOTE, THE LOCATION HAD BEEN CHANGED TO THE LOCATION FOR THE WINDOWS' LIBRARY LOCATION!!!)! Doing this corrects the primary iTunes functionality, but only after being forced to deleting the "iTunes Media Folder", quit iTunes, restart iTunes and Consolidate the Library - a whole bunch of steps and time to get back to "normal"!!!!!
    Again, this all happens by going into Windows, opening its iTunes, then THAT triggers the entire scenario I've described above - EVERY TIME!
    Thus, I avoid iTunes when I go into Windows, but I should NOT have to avoid using iTunes inside Windows! I hope I have described the problem/issues well enough that someone of you experts can provide a practical solution for me.
    A potential remedy I've thought of is:  Go into Windows' iTunes then go into its Preferences' Advance tab and change ITS location to be the exact same location as the primary Mac OS X's, click OK, then immediately close that iTunes.
              DOES THIS SOUND LIKE IT WILL WORK - I.e., USING THE EXACT SAME LIBRARY LOCATION FOR BOTH iTUNES?????
              IF THIS WOULD WORK, WHAT ELSE MUST I DO TO EITHER iTUNES OR TO BOTH iTUNES TO USE BOTH iTUNES
              USING THE SAME LIBRARY???
    Thank you for any suggested solutions - VERY MUCH!
    Larry

    Note that sharing a folder between different OS that use different file paths is not recommended as some files can have an absolute path or other OS specific data.
    You can click the Choose Folder button if you want to create or use a folder in a different location.<br />
    Make sure to select an empty folder (you need to create this folder in advance) and not a folder that already has files as Firefox will use the specified location in this case.
    *http://kb.mozillazine.org/Profile_Manager
    You can also create a new profile via the command line.
    *https://developer.mozilla.org/Command_Line_Options
    You can consider to use Sync to sync the two profiles

  • How to use 1 Iphoto library on a MacBooKPro by several users

    Hello,
    does anyone know, if you can use 1 Iphoto Library by several users on a MacBookPro (OS Lion, Iphoto11)
    thnx Ruud Rijkse

    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

  • How to use class path library

    We are using java in built library to write the xml filw which "XSLT". One library named "saxon9he.jar" is already on my system at the path "C:\Program Files\Java\jre1.5.0_15\lib\ext" . when I run the progaram to read/ write in xml file, my progarm use this system library saxon9he.jar.
    And generate the exception "Exception Caught while Checking tag in XMLjava.net.URISyntaxException: Illegal character in path at index 2: ./\config\SDBExplorer.xml stacktrace net.sf.saxon.trans.XPathException: java.net.URISyntaxException: Illegal character in path at index 2: ./\config\SDBExplorer.xml"
    What I should do so that in class path it will take XSLT for xml operation instead of saxon9he.jar
    Thanks!
    Aayushi SOni

    aanu wrote:
    ..One library named "saxon9he.jar" is already on my system at the path "C:\Program Files\Java\jre1.5.0_15\lib\ext" . when I run the progaram to read/ write in xml file, my progarm use this system library saxon9he.jar.
    ..What I should do so that in class path it will take XSLT for xml operation instead of saxon9he.jarGee. Isn't this a poster child for the Sun advice to not put APIs into the ${java.home}/lib/ext/?
    The answer is to
    - Remove the saxon9he.jar from the ${java.home}/lib/ext
    - Add APIs to whatever application requires them, at run-time.
    Thanks!No wuckin' forries.

Maybe you are looking for