DPM 2010 to DPM 2012 Upgrade

Hello
We did an in-place upgrade on a few of our DPM 2010 servers to DPM 2012 and it went well. In the Reporting section, we have configured tape management reports on a weekly basis. The issue is that the information on 'overdue tapes' is not mentioned in the
report which is now being sent. This issue persists on all the DPM servers that we upgraded. Any suggestion?
Regards
Pavit
Pavit Bhutani

Hi,
This issue is fixed in UR3.
2756127-Description of Update Rollup 3 for System Center 2012
http://support.microsoft.com/kb/2756127
Also - be aware of the following issue after installing UR3 if you are protecting SharePoint.
KB2809773-The Data Protection Manager database grows and the console crashes after installing Update Rollup 3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Upgrade from DPM 2010 to DPM 2012 R2

Dears,
is it possible to upgrade DPM from 2010 to 2012 R2.
Thanks

from
https://social.technet.microsoft.com/Forums/en-US/18db5fd3-213b-4d60-b853-646daf780e3e/upgrade-from-2010-to-2012-r2?forum=dpmsetup
I recommend to watch the video to upgrade DPM
Update DPM 2010 to DPM 2012 -
http://www.youtube.com/watch?v=v6hUyg5ePww
Update DPM 2012 to DPM 2012 SP1 -
http://www.youtube.com/watch?v=4VcN1jv_q_g
and read the articles (you can translate using
http://itools.com/tool/google-translate-web-page-translator)
Обновление System Center DPM 2010 до DPM 2012 (текст)
Обновление System Center DPM 2012 до DPM 2012 SP1 (текст)
Обновление System Center DPM 2012 SP1
до DPM 2012 R2 (текст)
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points
DPM blog

DPM 2010 to DPM 2012R2 configuration transfer failure

Hello,
I’m doing a side by side upgrade from DPM 2010 to DPM 2012R2 and I’m trying to transfer my configuration with
Ruud Baar's PS scripts DPMsaveConfig and DPMcreateConfig.
On the new DPM 2012R2 box, when I run DPMcreateConfig it fails.
Here is the end of the log:
“[14:07:30]      Allocating
DPM -Calculate = True for [C:\]...
[14:07:42] Committing protectiongroup [Client Group 1]
[14:07:54] Processing group [Client Group 1] finished
[14:07:55] TRAP: DPMcreateConfig
Exception calling "GetProtectionGroups" with "0" argument(s): "Object
reference not set to an instance of an object."
At C:\DPMcreateConfig.ps1:147 char:2
+     $pg = $srv.GetProtectionGroups() | ?{$_.FriendlyName -eq $xgrp.GroupName}
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : NullReferenceException
Set-protectiongroup : Connection to the DPM service has been lost. (ID: 917)
Review the application event log for information about a possible service
shutdown. Verify that the following services are not disabled:
DPM
DPM Replication Agent
SQLAgent$MSSQLSERVER2
MSSQL$MSSQLSERVER2
Virtual Disk Service
Volume Shadow Copy
At C:\DPMcreateConfig.ps1:358 char:2
+     Set-protectiongroup $2ndmpg
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: NotSpecified: (:) [Set-DPMProtectionGroup], DlsE
   xception
    + FullyQualifiedErrorId : UICantConnectToEngine,Microsoft.Internal.Enterpr
   iseStorage.Dls.UI.Cmdlet.ProtectionCmdLets.CommitProtectionGroup “
Any help would be appreciated.
Thanks,
Ivan
Ivan

Hi Buchatech,
Nope, I haven't tried the updated script. I completed the migration manually 9 months ago.
Thanks,
Ivan
Ivan
Ok. I knew this was an old thread. I thought I would respond anyway to make sure you figured it out. I do know that the updated script does not error out on SCDPM 2012 R2.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Migrate data from DPM 2010 to DPM 2012

Hello.
I am currently using DPM 2010. I want to move to DPM 2012, but not as an upgrade. I am using a 20 TB storage pool for nightly backups and tape for weekly backups. The goal of the upgrade is to upgrade the OS as well as DPM, so this will be a fresh installation,
not an in place upgrade. Is there a way to get the recovery point information for tapes and the storage pool migrated into DPM 2012 from DPM 2010?

This topic is closer to system center forum and even there the answer is well beyond the scope. I would recommend
1. MS System Center Guides
2. Survival guides
http://social.technet.microsoft.com/wiki/contents/articles/7075.system-center-2012-configuration-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11414.system-center-2012-orchestrator-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11417.system-center-2012-endpoint-protection-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/8113.system-center-2012-service-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/7809.system-center-2012-operations-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11867.system-center-2012-data-protection-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11415.system-center-2012-app-controller-survival-guide.aspx
3. Book from Packt Publishing
http://www.packtpub.com/microsoft-system-center-data-protection-manager-2012-with-service-pack-1/book
Make experiments on test system before doing changes in production environment.
Regards
Milos

DPM 2010; migrated DPM protection group to new storage pool ; data on source disk is not expiring

I am running DPM 2010 with 4 storage pool disks. 2 are iSCSI; 1 is SAS; the fourth, also iSCSI, was recently deployed to replace the SAS storage pool disk.
(1) iSCSI
(2) iSCSI
(3) SAS - Source
(4) iSCSI - Destination
Initially we tried to migrate the entire data source (3) to the new iSCSI storage pool disk destination (4). This failed
Set-ProtectionGroup: The allocation of disk space for storage pool volume failed because there is not enough unallocated disk space in the storage pool (ID: 358). (Sorry, I was not allowed to attach an image).
We believe the source disk previously created dynamic links to the long-term retention device (tape) which resulted in exceeding the available space on the new destination iSCSI storage pool disk. The source storage pool disk was totaling ~2.5TB, but needed
~9TB for the destination.
Instead I've tried to migrate the DPM protection group. The migration was successful. I followed the procedure outlined here
"Microsoft DPM 2012 Sp1 – How To Migrate Data Source using MigrateDatasourceDataFromDPM by ICTtechie" (Sorry, I was not allowed to include a link).
My understanding / expectation was that the data on the source disk would expire within 5 days (as this is our retention time set for disk replication); instead data started to expire from the other 2 iSCSI (1), (2) storage pool disks.
What am I missing here?
Thanks

Ok - you may have bumped into this.
WMF 3.0 is incompatible with some Microsoft products including
DPM 2010.
Windows Management Framework 3.0 (WMF 3.0), which
includes PowerShell 3.0, was made available Dec. 11 on Windows Update as an
optional update but has since been pulled.
More information is available on http://blogs.msdn.com/b/powershell/archive/2012/12/20/windows-management-framework-3-0-compatibility-update.aspx
Resolution
To resolve this issue, uninstall KB2506146 or KB2506143.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

SSDT 2010 vs SSDT 2012: Upgrade benefits?

Hello,
Our organisation is upgrading SQL 2008R2 to SQL 2012. For SSIS development, we have a choice of upgrading to either
Visual Studio 2010 (and SSDT 2010), or
Visual Studio 2012 (and SSDT 2012)
Because of the black and white UI in VS2012 and SSDT 2012 is disliked by the ETL developers, we are inclined to stick to VS2010 and SSDT 2010.
By doing this, are we missing any important features? In other words, is it worth upgrading to VS2012/SSDT2012?
Thanks

Not sure what the better is, but vs2012 is probably indeed faster, more stable, etc. etc. and there is also a
blue color theme available:
And you can run time side by side on the same machine...
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

VM Protection running on Hyper-V 2012 R2 with DPM 2010

Hi everyone,
We recently setup a new Hyper-V 2012 R2 server hosting virtual machine running with a Win2012 R2 server OS and 2008R2 standard Edition
Our backup solution is still running DPM 2010.
As I understand from the DPM Protection Support Matrix, You can only protect virtual machine running on a hyper-v server under Windows 2012 R2 OS with DPM 2012 R2. Isn't there possible any walkaround to have the vm protection working on dpm2010?
Otherwise, if we choose to protect the VM at guest level instead of host-level, is DPM able to perform the recovery point?
For instance, we've got a VM running a SQL database. We would like specifically to back up that SQL database running on that virtual machine.Is DPM able to perfom that job?
Regards,
Evan

Hi,
To remain in a supported configuration you need to a DPM 2012 R2 server to protect the Windows 2012 R2 hyper-v server. Unfortunately, the path to get there from DPM 2012 is not an easy one.
Upgrade steps.
Note: the Operating system and SQL requirements for DPM 2012
System Requirements for DPM in System Center 2012
http://technet.microsoft.com/en-us/library/hh757757.aspx
1) On DPM 2010 install the latest update: KB2751231 Description of hotfix rollup package 7 for System Center Data Protection Manager 2010
2) Update the Agents to 3.0.8195.0
3) Backup the DPM 2010 database.
4) Upgrade to DPM 2012 and update agents.
5) Install the latest DPM 2012 update and Update agents.
6) Backup the DPM 2012 database.
7) Upgrade to DPM 2012 Sp1 and update agents.
Note: The Operating system and SQL requirements for DPM 2012 Sp1
System Requirements for DPM in System Center 2012 Sp1
http://technet.microsoft.com/en-us/library/jj651645.aspx
8) Install the latest DPM 2012 Sp1 update and update agents.
KB2904723-Issues that are fixed in System Center 2012 Data Protection Manager SP1 Update Rollup 5
http://support.microsoft.com/kb/2904723
KB2904730-Description of System Center 2012 Service Pack 1 Update Rollup 5
http://support.microsoft.com/kb/2904730
9) Continue to DPM 2012 R2..
Note: the Operating system and SQL requirements for DPM 2012 R2.
System Requirements for DPM in System Center 2012 R2
http://technet.microsoft.com/en-us/library/hh758176.aspx
10) Backup the DPM 2012 Sp1 database.
11) Upgrade to DPM 2012 R2 and update agents
12) Install latest DPM 2012 R2 update and update agents.
Else, you could stand up a new dedicated DPM 2012 R2 server from scratch to protect that new server and leave the DPM 2010 as is for current protection.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Restore from DPM 2010 backup in DPM 2012

Hi,
I am planning to move from current DPM 2010 to DPM 2012 R2.
In-place upgrade to DPM2012 does not seem to be possible due to upgrade errors so I will have to wipe off the physical server and install DPM2012 from scratch. I use virtual tape drive (firestreamer) and backup to disk for long term protection.
The problem is how will I read my existing DPM2010 backups in DPM2012.
Is there a way to attach old virtual tapes and be able to restore data from it?
Thanks for all your feedback.
Tech Farmer

Hi Eugene,
Thanks for your reply.
Your solution will work for inplace upgrade. My scenario is building DPM2012r2 from scratch., which means I will not be restoring DPM2010 DB. Due to this, DPM will have no record of the tape catalog/contents.
Firestreamer will be able to mount the vTape but not identify whats in the vTape.
With this in mind, I trying to figure out if there is a way to read the old virtual tapes (files) in the new DPM2012r2.

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

Hi,
We have recently upgraded from DPM 2010 to 2012. Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group. Existing backups are running without errors.
We have tried checking the DPM sql user account permissions as described in
this article but with no luck. More searching has not provided any other relavent fixes. We are now stuck on how to troubleshoot this any further.
In the DPM console we get the following error adding a VM to an existing protection group:
Modify protection group: Virtual Machines failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
Allocate Replica For \Backup Using Saved State\Cacti failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
In the event log we see:
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Thanks in advance for any advice.

Hi,
The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection. Generally speaking
Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process. Please investigate that, see if two new volumes get created when protecting a new data
source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2010 - 2012 Failure

Hi,
I am trying to upgrade to DPM to 2012 and keep getting an error on the SQl Server 2008 R2 section.
SQL is installed locally by DPM 2010 so i am not sure why its failing.
If I look at the logs and run the more information tab everything passes and there is no issues.
Anyone got any ideas
The SQL Server 2008 R2 installation failed. Review the SQL Server installation log file for failures, and then take the appropriate action.
ID: 4310. Details: Unknown error (0x84bc0519)"
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2012-03-27 16:53:57
End time: 2012-03-27 17:05:39
Requested action: Patch
Instance MSDPM2010 overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2012-03-27 16:55:12
End time: 2012-03-27 17:05:28
Requested action: Patch
Machine Properties:
Machine name: DPM
Machine processor count: 4
OS version: Windows Server 2008
OS service pack: Service Pack 1
OS region: United Kingdom
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 MSDPM2010 MSSQL10.MSDPM2010 Database Engine Services 1033
Standard Edition 10.1.2531.0 No
Sql Server 2008 MSDPM2010 MSRS10.MSDPM2010 Reporting Services 1033
Standard Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Basic
1033 Standard Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Complete
1033 Standard Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 3
KBArticle: KB2546951
KBArticleHyperlink: http://support.microsoft.com/?kbid=2546951
PatchType: SP
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 10.3.5500.0
ProductVersion: 10.0.1600.22
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0;10.0.4010.0:10.0.4250.0;10.0.5501.0:10.0.5750.0
PackageName: SQLServer2008-KB2546951-x64.exe
Installation location: c:\c13a866f641d0165667a\x64\setup\
Updated product edition:
Instance Edition
MSDPM2010 STANDARD
User Input Settings:
ACTION: Patch
ALLINSTANCES: True
CLUSTERPASSIVE: False
CONFIGURATIONFILE:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
QUIET: True
QUIETSIMPLE: False
X86: False
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120327_165354\SystemConfigurationCheck_Report.htm

Anyone got any ideas?
The SQl server doesn't report any issues and the system configuration check report passes everything :S
I am at a loss.
Where are the DPM 2012 installation log files stored?
I see a folder called c:\DPMLogs but there all old log files.

DPM 2010 installation failure (SQL-server Reporting Services Problem)

Hi everyone,
The last 2 days I have been trying to get DPM 2010 installed on a DC. I know this is not recommended, but for our company with the current setup it's the only way to do it.
I have been reading some Microsoft articles (http://technet.microsoft.com/en-us/library/ff399416.aspx) about doing this but I fail to do so.
I have made all of the right service accounts (I guess) and am doing everything in the guide but still get the same error message over and over again:
Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server
I just can't get my head around it. This is the error message when I try to install DPM 2010 using an existing SQL-database which I have configured in the SQL 2008-server sp1 installation.
I have enclosed some screenshots so you could maybe check some things that are not correct? Hopefully we can get this issue resolved, because it's driving me crazy to be honest!
Physical server which is ADC and where I need to install SQL-server and DPM: VMBACKUP
The service account for DPM is: DPMSQLSvcsAcct
Also have another service account: DPMR$VMBACKUP
I have also enclosed the error log located in C:\DPMLogs\

This is the DOM error log:
MSI (s) (D0:4C) [14:59:59:626]: Windows Installer reconfigured the product. Product Name: Microsoft Application Error Reporting. Product Version: 12.0.6015.5000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (D0:4C) [14:59:59:627]: Deferring clean up of packages/files, if any exist
MSI (s) (D0:4C) [14:59:59:628]: MainEngineThread is returning 0
MSI (s) (D0:D8) [14:59:59:631]: RESTART MANAGER: Session closed.
MSI (s) (D0:D8) [14:59:59:631]: No System Restore sequence number for this installation.
=== Logging stopped: 27/03/2012 14:59:59 ===
MSI (s) (D0:D8) [14:59:59:632]: User policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Machine policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D0:D8) [14:59:59:632]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D0:D8) [14:59:59:634]: Restoring environment variables
MSI (s) (D0:D8) [14:59:59:634]: Destroying RemoteAPI object.
MSI (s) (D0:90) [14:59:59:635]: Custom Action Manager thread ending.
MSI (c) (9C:04) [14:59:59:636]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:04) [14:59:59:637]: MainEngineThread is returning 0
=== Verbose logging stopped: 27/03/2012 14:59:59 ===
[27/03/2012 14:59:59] Information : MsiInstallProduct returned 0.
[27/03/2012 14:59:59] Information : End install.
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : Start Inspect.
[27/03/2012 14:59:59] Information : Check processor configuration.
[27/03/2012 14:59:59] Information : Query WMI provider for configuration of processor. (Namespace : \\localhost\root\cimv2).
[27/03/2012 14:59:59] Information : Query for WMI class. (Query : SELECT * FROM Win32_Processor).
[27/03/2012 15:00:00] Data : Clock speed of processor = 2500
[27/03/2012 15:00:00] Data : Manufacturer of processor = GenuineIntel
[27/03/2012 15:00:00] Information : Check the amount of RAM.
[27/03/2012 15:00:00] Information : Query WMI provider for configuration of memory. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_OperatingSystem).
[27/03/2012 15:00:00] Data : Found memory = 14677964
[27/03/2012 15:00:00] Data : Total amount of memory = 14677964
[27/03/2012 15:00:00] Information : Check the version of Microsoft Management Console on the machine.
[27/03/2012 15:00:00] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Required version of Microsoft Management Console = 5.2.3790.2560
[27/03/2012 15:00:00] Information : MMC correct version is detected.
[27/03/2012 15:00:00] Information : Check if this machine is part of active directory.
[27/03/2012 15:00:00] Data : Looking for Active Directory node = LDAP://RootDSE
[27/03/2012 15:00:00] Information : Active Directory is detected on this machine.
[27/03/2012 15:00:00] Information : Check if the machine role is Domain Controller.
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_ComputerSystem).
[27/03/2012 15:00:00] Data : Localhost in Computer role = 4
[27/03/2012 15:00:00] * Warning : DPM Setup has detected that this computer is a domain controller.Make sure that you have followed the steps given in the link below before proceeding with the DPM Setup.
[27/03/2012 15:00:00] Information : The machine role is a Domain Controller.
[27/03/2012 15:00:00] Information : Check if Volsnap QFE is applied.
[27/03/2012 15:00:00] Information : Volsnap QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if Logical Disk Manager (LDM) QFE is applied.
[27/03/2012 15:00:00] Information : LDM QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB962975 QFE is applied.
[27/03/2012 15:00:00] Information : KB962975 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB975759 QFE is applied.
[27/03/2012 15:00:00] Information : KB975759 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB955543 QFE is applied.
[27/03/2012 15:00:00] Information : KB955543 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Detect if Powershell is installed.
[27/03/2012 15:00:00] Data : Installed Version of Windows Powershell. = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Minimum Required version of Windows Powershell. = 6.0.6002.18111
[27/03/2012 15:00:00] Information : Required version of Powershell software is installed on this system.
[27/03/2012 15:00:00] Information : Check if reboot is required because of Dot Net installation.
[27/03/2012 15:00:00] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
[27/03/2012 15:00:00] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
[27/03/2012 15:00:00] Information : Reboot is not required.
[27/03/2012 15:00:00] Information : Detect if SIS Service is running.
[27/03/2012 15:00:00] Information : Detect if SIS Filter service SIS is running.
[27/03/2012 15:00:00] Information : SIS Service SIS is running on this system.
[27/03/2012 15:00:00] Information : Check the version of Windows Installer on the machine.
[27/03/2012 15:00:00] Data : Version of Windows Installer on the machine = 5.0.7601.17514
[27/03/2012 15:00:00] Data : Required version of Windows Installer = 4.5.6001.18000
[27/03/2012 15:00:00] Information : Windows Installer correct version is detected.
[27/03/2012 15:00:00] Information : Check if Removable Storage Service (Rsm) is disabled or not.
[27/03/2012 15:00:00] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='NtmsSvc').
[27/03/2012 15:00:01] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: NtmsSvc : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckRsmServiceConfig(InspectContext context)
[27/03/2012 15:00:01] Information : Check if reboot is required.
[27/03/2012 15:00:01] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
[27/03/2012 15:00:01] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
[27/03/2012 15:00:01] Information : Reboot is not required.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:01] Information : SQL Server 2008 MSDPM2010 instance is not present on this system.
[27/03/2012 15:00:01] *** Error : Setup has detected that the instance provided is not a SQL Server 2008 instance. Please provide a SQL Server 2008 instance having Service Pack 1 installed.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 Tools is installed.
[27/03/2012 15:00:01] Information : SQL Server 2008 Tools is installed
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$MSDPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:02] Information : Sql Server 2008 Service Pack Level is 0
[27/03/2012 15:00:02] Information : SQL Server 2008 SP1 is not present on MSDPM2010 instance of this system.
[27/03/2012 15:00:02] *** Error : Setup has detected that SQL Server 2008 Service Pack 1 has not been installed on the VMBACKUP\MSDPM2010 instance.Install SQL Server 2008 Service Pack 1 or higher and try again.
[27/03/2012 15:00:02] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: SQLAgent$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlAgentServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service SQLAgent$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server Agent service configuration is not correct.
[27/03/2012 15:00:02] Information : Check SQL Server service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlServerServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service MSSQL$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server service configuration is not correct.
[27/03/2012 15:00:02] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:02] Information : Check for existing database.
[27/03/2012 15:00:02] Information : Starting service
[27/03/2012 15:00:02] Data : Service name = MSSQL$MSDPM2010
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 ---> System.InvalidOperationException: Service MSSQL$MSDPM2010 was not found on computer 'VMBACKUP'. ---> System.ComponentModel.Win32Exception: The specified service does not exist as an installed service
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.GenerateNames()
at System.ServiceProcess.ServiceController.get_ServiceName()
at System.ServiceProcess.ServiceController.GenerateStatus()
at System.ServiceProcess.ServiceController.get_Status()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.CheckServiceStartError(String serviceName, InvalidOperationException invalidOperationException)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartSqlService(String instanceName, String sqlServerMachineName)
[27/03/2012 15:00:02] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:02] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:02] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2010\v10\admin).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2010').
[27/03/2012 15:00:02] * Exception : => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckSqlServerReportingServices(InspectContext context)
[27/03/2012 15:00:02] Information : SQL Server 2008 Reporting Services MSDPM2010 instance is not installed.
[27/03/2012 15:00:02] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to MSDPM2010 of SQL Server.1)To use the local dedicated MSDPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:02] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: ReportServer$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckRosettaServicesConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service ReportServer$MSDPM2010 is not installed. The SQL Server 2008 Reporting Services installation is not valid.Uninstall SQL Server 2008 Reporting Services and then run DPM Setup again.
[27/03/2012 15:00:02] Information : Report Server service configuration is not correct.
[27/03/2012 15:00:02] Information : End Inspect.
[27/03/2012 15:00:02] Information : **************************************************************************************
[27/03/2012 15:00:02] Information : Instantiating inspect component.
[27/03/2012 15:00:02] Data : Path of output xml = \PostInstallInspect.xml
[27/03/2012 15:00:03] Information : <<< Dialog >>> Inspect Page : Leaving
[27/03/2012 15:00:03] Information : <<< Dialog >>> User Information Page : Entering
[27/03/2012 15:00:03] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> User Information Page : Leaving
[27/03/2012 15:00:09] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> Install location Page : Entered
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Check if the media is removable
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Drive Name = C:\
[27/03/2012 15:00:11] Data : Drive Type = 3
[27/03/2012 15:00:11] Information : Check attributes of the directory
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:17] Information : Check if the media is removable
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Drive Name = D:\
[27/03/2012 15:00:17] Data : Drive Type = 3
[27/03/2012 15:00:17] Information : Check attributes of the directory
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : File Attributes = Directory
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Free Space = 786513
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:17] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Drive Name = D:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : File Attributes = Directory
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Drive Name = C:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:18] Information : Check the filesystem on which DPM and prerequisites are installed
[27/03/2012 15:00:18] Information : D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Information : C:\Windows\system32
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Free Space = 786513
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Data : Location of program files = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Location of database files = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Information : <<< Dialog >>> Install location Page : Leaving
[27/03/2012 15:00:27] Data : Path of inspection output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : Instantiating inspect component.
[27/03/2012 15:00:27] Data : Path of output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : **************************************************************************************
[27/03/2012 15:00:27] Information : Start Inspect.
[27/03/2012 15:00:27] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:27] Information : Query WMI provider for SQL Server 2008. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:27] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:28] Information : SQL Server 2008 DPM2010 instance is present on this system.
[27/03/2012 15:00:28] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:28] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$DPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:28] Information : Sql Server 2008 Service Pack Level is 3
[27/03/2012 15:00:28] Information : SQL Server 2008 SP1 is present on DPM2010 instance of this system.
[27/03/2012 15:00:28] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:28] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:28] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server Agent service configuration is correct.
[27/03/2012 15:00:29] Information : Check SQL Server service configuration.
[27/03/2012 15:00:29] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server service configuration is correct.
[27/03/2012 15:00:29] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:29] Information : Check the disk space for remote database.
[27/03/2012 15:00:29] Information : Remote Db disk space required : 900 MB disk space available = 786513 MB
[27/03/2012 15:00:29] Information : Check the Named Pipes protocol for remote database.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Information : Check for existing database.
[27/03/2012 15:00:29] Information : Starting service
[27/03/2012 15:00:29] Data : Service name = MSSQL$DPM2010
[27/03/2012 15:00:29] Data : Current status of service = Running
[27/03/2012 15:00:29] Information : Service is already running
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=master;server=np:localhost\DPM2010
[27/03/2012 15:00:29] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:29] Information : DPM database DPMDB is missing or corrupt.If you are performing a clean installation of DPM, you must delete the DPM database before you run Setup. If you are upgrading or repairing an existing installation of DPM, you must restore a valid DPM database, and then proceed with Setup.
[27/03/2012 15:00:29] Information : Check whether the remote db msi has been installed.
[27/03/2012 15:00:29] Information : Check DPM Database Version.
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=DPMDB;server=localhost\DPM2010
[27/03/2012 15:00:29] * Exception : Expecting the following exception. Ignoring intentionally. => System.Data.SqlClient.SqlException: Cannot open database "DPMDB" requested by the login. The login failed.
Login failed for user 'MANAGEMENT\DPMSQLSvcsAcct'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlContext.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectDls.CheckDBVersion(InspectContext context)
[27/03/2012 15:00:29] Information : detectResult = DPMDBAbsent
[27/03/2012 15:00:29] *** Error : DPM Setup has detected that the DPM database files are missing from the selected instance of SQL Server 2008.Make sure that the correct database files are attached to the selected instance of SQL Server and then install DPM 2010 again.
[27/03/2012 15:00:29] Information : Checking if DPM db backup is needed.
[27/03/2012 15:00:29] Information : This is not upgrade path, so no DB Backup needed
[27/03/2012 15:00:29] Information : DPM DB Backup is not needed.
[27/03/2012 15:00:29] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:29] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Path of configuration file for SQL Server 2008 Reporting Services = D:\Program Files\Microsoft SQL Server\MSRS10.MSRS10\Reporting Services\ReportServer\RSReportServer.config
[27/03/2012 15:00:29] Information : Query WMI provider for instance linked to SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Database server for SQL Server 2008 Reporting Services = VMBACKUP\DPM2010
[27/03/2012 15:00:29] Information : SQL Server 2008 Reporting Services DPM2010 instance is installed and linked to SQL Server VMBACKUP\DPM2010.
[27/03/2012 15:00:29] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server.1)To use the local dedicated DPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:29] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : Report Server service configuration is correct.
[27/03/2012 15:00:29] Information : Check Reporting SecureConnectionLevel.
[27/03/2012 15:00:29] Information : Getting the reporting secure connection level for localhost/DPM2010
[27/03/2012 15:00:29] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[27/03/2012 15:00:29] Information : End Inspect.
[27/03/2012 15:00:29] Information : **************************************************************************************

What's the best way to backup DFS using DPM 2010?

We setup DFS on two Windows 2012 R2 and they are hosting files. What’s the best way to backup DFS using DPM 2010?
1. When doing data backup, do we backup both dfs01 and dfs02? Or just backup one of them?
2. Beside the data, what do we need to backup?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Protecting Data in DFS Namespaces
Backup files and BRM of dfs01 and dfs2 for minimaze traffic.
If dfs01 and dfs02 have good channel width that use DPM to only protect a single “copy” of the data located on a server-specific local path.
Data Protection Manager 2010 Protection Best Practices
Have a nice day !!!

Dpm 2010 and ws2012r2 hyper-v

Hi i have dpm 2010 and new ws2012r2 hyper-v. I get the error replica is not consistency. I get error id104 unknow error 0x80041010.
ok i found out that dpm 2010 dont support ws2012r2.
is there a fix or anything i can use dpm on ws2012r2hyper-v?Or need i install agents into vm becase the os of vm are 2008r2.

Hi,
That is correct - only DPM 2012 R2 can protect Windows 2012 R2 workloads. I would recommend setting up a dedicated DPM 2012 R2 server to protect the Hyper-V guests. If that is not doable, then yes, you can protect the guest workloads directly
by installing DPM 2010 agents inside the guests.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2010 How to use autoloader tape library

Dear Team
Hello All,
We have implemented the DPM 2010 successfully in our organization. But while creating the protection group it shows the tape library name but not the individual tapes.
So, our requirement is as below.
We want to create the daily backup in one tape. and weekly backup in another tape.
How we can select the specific tape Slot in library for different backup?
An early response will be highly appreciated.
Regards
Selvaraj.S
[email protected]

Hi,
DPM has a flat tape handling model and does not provide the direct ability to assign certain tapes or slots to specific backup jobs. Depending on the retention period of the two goals, DPM should use separate tapes by default. You have
some control by tweaking the TapeWritePeriodRatio and ExpiryToleranceRange settings.
See the following resources for more information on the above parameters:
Enabling Data Co-Location on DPM
http://technet.microsoft.com/en-us/library/ff399230.aspx
http://blogs.technet.com/b/dpm/archive/2012/05/14/things-you-can-do-to-help-data-protection-manager-utilize-your-tapes-full-capacity.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2010 to DPM 2012 Upgrade

Similar Messages

Maybe you are looking for