DPM 2012 Agent installation issue

I have SCDPM 2012 RTM installed on my machine and whenever I try to install the agent remotely , DPM services stops and installation stucks at 1 percentage,
Mohan Kumar.

hi Both,
Yes I tried both the options mentioned but still I am facing the same issue. My Agent Co-ordinator service in DPM Master server goes stopped mode frequently. Below are the errors.
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
Mohan Kumar.

Similar Messages

If DPM 2012 agent installation support to windows server 2012 ?

i have DPM 2012 and i need to install agent on windows server 2012

Yes, you need.
You can refer to these links :
DPM 2010
http://technet.microsoft.com/en-us/library/ff399140.aspx
DPM 2012
http://technet.microsoft.com/en-us/library/jj860400.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions.

DPM Agent Installation issue.

A target server was running fine. All databases replica becomes inconsistent then to troubleshoot I uninstall DPM agent and trying to reinstall.
Firewall is enabled on target server , When I am trying to install from DPM console, getting error : Error 319 : Agent operation failed with communication error with DPM Agent Coordinatior service on target server.
When I tried to install at client end, its giving error : DPMAgentinstaller failed with errorcode =0x80070643,error says, fatal error during installation. Check log files in [WINDIR]Temp\MSDPM*.Log
When I checked log at temp folde, All I find Installer error 1708,1709 and 2205 2228.
Any thoughts.
Thanks in Advance

Hi
Maybe try adding a rule to the firewall:
netsh advfirewall firewall add rule name="DPM Remote Agent Push" dir=in action=allow service=any enable=yes profile=any remoteip=<IPAddress>
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

DPM 2010 agent installation on Domain Controller

Hello all, recently I tried to install the agent from my DPM 2010 server onto a Win2K8 Domain controller which failed (used a Domain Admin's credientials for the install, and on trusted domain). I remember in DPM 2007 you needed to install the agent through
command line. Can someone post up the correct steps to get a DPM 2010 agent installed to a DC?

Same issue here.
Pushing a DPM 2010 agent to a Windows 2008 DC fails with the error:
============
You cannot install the protection agent on SV-MGMT-03.xxxxxx.nl because access to the computer has been denied.
============
The DPM 2010 agent software is installed but DPM doesn't add the server. With an attach i can add the server but DPM 2010 cannot communicate with it.
===============
Protection agent version: 3.0.7696.0
Error: Data Protection Manager Error ID: 270
The agent operation failed on sv-mgmt-03.xxxxx.nl because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If sv-mgmt-03.xxxxxxx.nl is a workgroup server, the password for the DPM user account could have been changed or may have expired.
Recommended action: Check the following to troubleshoot this issue:
1) If the agent is not installed on sv-mgmt-03.xxxxxxxxx.nl, run DpmAgentInstaller.exe with this DPM computer as a parameter. For details, see the DPM Deployment Guide.
2) To attach the computer correctly to this DPM server, run the SetDpmServer tool on the protected computer.
3) If the computer is protected by another DPM server, or if the protection agent has been uninstalled, remove the protected data sources on this computer from active protection. Then, remove the entry of this computer from the Agents tab in the Management
task area.
4) If sv-mgmt-03.xxxxxxxxx.nl is a workgroup server, run SetDpmServer with the -UpdatePassword flag on the protected computer and Update-NonDomainServerInfo.ps1 on the DPM server to update the password.
5) If the DPM server and the protected computer are not in the same domain, ensure that there is a two-way trust setup between the two domains.
If the computer is protected by another DPM server, or if the protection agent has been uninstalled, you can remove the record of the computer from this DPM server.
==============
Anyone a solution for this?

SCOM Agent installation Issue

Dear all,
We have SCOM 2012 r2 , when we install agent through discovery . We got the below error
The Operations Manager Server cannot process the install/uninstall request for computer xxxxx due to failure of operating system version verification.
Operation: Agent Install
Install account: XXXXX
Error Code: 80070035
Error Description: The network path was not found.
Any idea what would be the issue here ?
Gone through some forum , but no luck
http://www.scapaot.de/blog/?p=291
Thanks,
74KMS

Hi
Kevin Holman has a great blog on troubleshooting agent install issues here:
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
The error you state has "Manual Agent Install" as the "fix".
Could you confirm:
1. The agent is in the same domain as the SCOM Management Server?
2. Can you do an NSLookup from the Management Server to the agent FQDN?
3. If you try and install the agent manually, do you get an error or does it complete?
Cheers
Graham

Audit Vault Agent Installation issue

Hi All,
I have installed the following things
1) Audit Vault Server (10.2.2.0.1) on a Windows 2003 Server
2) I completed the post-installation tasks
3) I am trying to install Audit Vault agent (10.2.2) on HPUX (11.11) machine.
I start the AV Agent runInstaller, and fill the details like AVAgent name, Username, connect String etc, then click on next , it throws the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine"
I am able to ping from Windows to HP machine and Vice versa (By IP Address and Hostname).
Can anyone tell me where i am going wrong and how to solve it.
Please mail to my email address ([email protected])
Thanks & Regards,
Rakesh

Hi,
The details of the installation done so far:
1) I have installed "Oracle Audit Vault Server (10.2.2)" on a Windows 2003 machine providing the following details
a) Audit vault Name
b) Audit Vault Home
c) Audit Vault Administrator
d) Administrator Password
e) Audit Vault Auditor
f) Ausitor Password
g) Database Vault Owner and Manager
h) Created a Audit Vault Agent user and added the user to the udit Vault server using AVCA.
2)I invoke the "Audit Vault Agent" Installer from a HP-UX machine and provide details viz.,
a) Audit vault Agent Name (Same name when i executed the AVCA command above)
b) Aduit Vault Agent Home
c) Agent Username
d) Agent Password
e) Audit Vault Server Connect String (Provide the Database details as mentioned in Audit Vault Server (localhost:port:servicename)
and when i click on the next button it throws me the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine".
Hope this gives you a better idea. Waiting for your reply.
Thanks & Regards,
Rakesh

Oracle 10gR2 Grid Management Agents installation issues

I have downloaded the Grid Management Agent from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of host server i am attempting to install the agent on is AIX5.3
I unzipped the following file
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the installer and it all seemed to work ok
I have checked the dbconsole is running,EMCTL STATUS DBCONSOLE
I have checked the agent is running EMCTL STATUS AGENT
I have checked the listener is running LSNRCTL STATUS
I have checked the database is up by CONNECT / AS SYSDBA
I can conect to the http://myserver:1158/em
The local enterprise manager works fine however as i say the server does not appear in my Grid Control console.
I have restarted al the afforementioned listeners, agents etc.
Can anyone give me a pointer as to why after what would appear to be a succesfull install the serevr does not appear in Grid Control console.

yingkuan again thanks for the reply
I have read the installation readme and it says i have these installation methods
1 - Methods for mass deployment
2 - Using Oracle Universal Installer (OUI) to install agent
3 - silent installation
4 - NFS Mounted agent installation
I am running the runInstaller method (2) from the list above
Like i say i basically downloaded the following file from Oracle Downloads:
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I FTP'd the file from my PC to the server i wish to be the agent.
I then ran the runInstaller from AIX_Grid_Control_agent_download_10_2_0_3_0/aix/agent/install.
However at no point was i asked to insert the OMS server or any other details.
I have read a couple of different readme files and followed what i believe to be the installation instructions. Could you or anyone else possibly throw any light on what i am doing wrong.
again any assitance greatly appreciated

DPM 2012 R2 installation error ID: 812

Server 2012 R2 Datacenter (virtual).
Installed SQL server 2012 SP1 locally, with all default settings.
Changed accounts according to DPM requirements for agent, server and reporting services
DPM setup complains as below, reporting service is running and, I believe, it is configured correctly, any clue ?
(error log is available, but does not give me valuable information).
EDIT:
Just realized that reporting services relies on web server so I installed IIS and fiddled a little with reporting services encryption key which brought me to the next error as follows:
Pasted from error log (just prior to error):
Information : Querying WMI Namespace: \\dpm01\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLSERVERAGENT'
Information : Sql Agent account name = ad\DPM01$
Information : Add user: ad\DPM01$ to local group: Distributed COM Users on server: DPM01
I don't know the ad\DPM01$ user, however it looks like it is the builtin Local System
I also tried to add this builtin to the group manually, but DPM still reports error.
Is DPM really designed to be so complicated and giving so much headache ?
Anyone able to help me out ?

[19.3.2014 9:21:22] Data : checkId = SQLServerService
[19.3.2014 9:21:22] Information : Running the check: SQLServerService
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SQLServerService
[19.3.2014 9:21:22] Information : Calling the method: CheckSqlServerServiceConfig
[19.3.2014 9:21:22] Information : Check SQL Server service configuration.
[19.3.2014 9:21:22] Data : SQL Server instance name = MSDPM2012
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2012'
[19.3.2014 9:21:22] Data : Credentials of the service = MyDomain\sqlsvc
[19.3.2014 9:21:22] Information : SQL Server service configuration is correct.
[19.3.2014 9:21:22] Information : Adding the check result entry for checkId: SqlServerService and result: 0
[19.3.2014 9:21:22] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:22] Data : Result = 0
[19.3.2014 9:21:22] Data : checkId = SqlServerReportingServices
[19.3.2014 9:21:22] Information : Running the check: SqlServerReportingServices
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SqlServerReportingServices
[19.3.2014 9:21:22] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
[19.3.2014 9:21:22] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
[19.3.2014 9:21:22] Information : Calling the method: CheckSqlServerReportingServices
[19.3.2014 9:21:22] Information : Check if SQL Server 2008 Reporting Services is installed.
[19.3.2014 9:21:22] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:22] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:22] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
[19.3.2014 9:21:22] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:22] Data : Result = 0
[19.3.2014 9:21:22] Data : checkId = SqlReportServerService
[19.3.2014 9:21:22] Information : Running the check: SqlReportServerService
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SqlReportServerService
[19.3.2014 9:21:22] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
[19.3.2014 9:21:22] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
[19.3.2014 9:21:22] Information : Calling the method: CheckRosettaServicesConfig
[19.3.2014 9:21:22] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2012'
[19.3.2014 9:21:23] Data : Credentials of the service = MyDomain\sqlsvc
[19.3.2014 9:21:23] Information : Report Server service configuration is correct.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ActiveDirectory
[19.3.2014 9:21:23] Information : Running the check: ActiveDirectory
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ActiveDirectory
[19.3.2014 9:21:23] Information : Calling the method: DetectActiveDirectory
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = SQLEval
[19.3.2014 9:21:23] Information : Running the check: SQLEval
[19.3.2014 9:21:23] Information : Getting the check for the checkId : SQLEval
[19.3.2014 9:21:23] Information : Calling the method: DetectSqlEval
[19.3.2014 9:21:23] Information : Detect if SQL Server is evaluation edition
[19.3.2014 9:21:23] Information : Starting service
[19.3.2014 9:21:23] Data : Service name = MSSQL$MSDPM2012
[19.3.2014 9:21:23] Data : Current status of service = Running
[19.3.2014 9:21:23] Information : Service is already running
[19.3.2014 9:21:23] Data : Edition = Standard Edition (64-bit)
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: SqlEval and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ClientTCPEnabled
[19.3.2014 9:21:23] Information : Running the check: ClientTCPEnabled
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ClientTCPEnabled
[19.3.2014 9:21:23] Information : Calling the method: CheckIfClientTCPEnabled
[19.3.2014 9:21:23] Information : Check if SQL Server has DPM Server already installed on it.
[19.3.2014 9:21:23] * Exception : Expecting the following exception. Ignoring intentionally. => System.Management.ManagementException: Invalid namespace
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObject.Initialize(Boolean getObject)
   at System.Management.ManagementObject.Get()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectPrerequisites.GetSqlToolsWMINameSpace()
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Running the check: RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Check if SQL Server has DPM Server already installed on it.
[19.3.2014 9:21:23] Information : The SQL and DPM machine are same so not checking for DPM installed
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Running the check: ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Calling the method: CheckReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Check Reporting SecureConnectionLevel.
[19.3.2014 9:21:23] Information : Getting the reporting secure connection level for MyDpmServer/MSDPM2012
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:23] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:23] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Running the check: RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Check the disk space for remote database.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='C:'
[19.3.2014 9:21:23] Information : Remote DB disk space required : 900 MB disk space available = 1096246 MB
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbTCP
[19.3.2014 9:21:23] Information : Running the check: RemoteDbTCP
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbTCP
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbTCP
[19.3.2014 9:21:23] Information : Check the Named Pipes protocol for remote database.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbMsi
[19.3.2014 9:21:23] Information : Running the check: RemoteDbMsi
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbMsi
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbMsi
[19.3.2014 9:21:23] Information : Check whether the remote DB msi has been installed.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Information : Getting the string form of report object
[19.3.2014 9:21:23] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : End Inspect.
[19.3.2014 9:21:23] Information : **************************************************************************************
[19.3.2014 9:21:23] Information : Instantiating inspect component.
[19.3.2014 9:21:23] Data : Path of output xml = \PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Deserializing the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\checks.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\checks.xml
[19.3.2014 9:21:23] Information : Deserialising the scenario XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\scenarios.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\scenarios.xml
[19.3.2014 9:21:23] Information : Getting scenarios for the product: DPM
[19.3.2014 9:21:23] Information : Getting scenarios for DPM
[19.3.2014 9:21:23] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
[19.3.2014 9:21:23] Information : Query WMI provider for SQL Server 2008.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[19.3.2014 9:21:23] * Exception : => System.Management.ManagementException: Invalid namespace
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
[19.3.2014 9:21:23] * Exception : Expecting the following exception. Ignoring intentionally. => System.Management.ManagementException: Invalid namespace
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.DetectSqlServer(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
[19.3.2014 9:21:23] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is not present on this system.
[19.3.2014 9:21:23] Information : Query WMI provider for SQL Server 2008.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[19.3.2014 9:21:23] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is present on this system.
[19.3.2014 9:21:23] Information : Inspect context initialized with
SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[19.3.2014 9:21:23] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[19.3.2014 9:21:23] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServer
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServerReportingServices
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServerTools
[19.3.2014 9:21:23] Information : Getting the installables which were not detected
[19.3.2014 9:21:23] Information : Getting the string form of report object
[19.3.2014 9:21:23] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Getting the falures while performing checks
[19.3.2014 9:21:23] Information : Getting the error results
[19.3.2014 9:21:23] Information : Getting the warning results
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Getting the falures while performing checks
[19.3.2014 9:21:23] Information : Getting the error results
[19.3.2014 9:21:23] Information : Getting the warning results
[19.3.2014 9:21:23] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:23] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:24] Information : <<< Dialog >>> Inspect Page : Leaving
[19.3.2014 9:21:24] Information : <<< Dialog >>> User Information Page : Entering
[19.3.2014 9:21:36] Information : <<< Dialog >>> User Information Page : Leaving
[19.3.2014 9:21:36] Information : <<< Dialog >>> Install location Page : Entered
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : File Attributes = Directory
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : File Attributes = Directory
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.File.GetAttributes(String path)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[19.3.2014 9:21:38] Information : Check if the media is removable
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Drive Name = C:\
[19.3.2014 9:21:38] Data : Drive Type = 3
[19.3.2014 9:21:38] Information : Check attributes of the directory
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : File Attributes = Directory
[19.3.2014 9:21:38] Information : Check if the media is removable
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Data : Drive Name = C:\
[19.3.2014 9:21:38] Data : Drive Type = 3
[19.3.2014 9:21:38] Information : Check attributes of the directory
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.File.GetAttributes(String path)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[19.3.2014 9:21:38] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[19.3.2014 9:21:38] Information : Check the filesystem on which DPM and prerequisites are installed
[19.3.2014 9:21:38] Information : C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Information : C:\Windows\system32
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Information : <<< Dialog >>> Install location Page : Leaving
[19.3.2014 9:21:41] Information : <<< Dialog >>> Commit Page : Entering
[19.3.2014 9:21:41] Data : An instance of SQL Server to be used to create database = MSDPM2012
[19.3.2014 9:21:41] Data : Target directory for installation = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:41] Data : Physical location of database = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:42] Information : <<< Dialog >>> Commit Page : Leaving
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : Log setup inputs =>
[19.3.2014 9:21:42] Data : ProgramFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:42] Data : UIProgramFiles = C:\Program Files\Microsoft Data Protection Manager
[19.3.2014 9:21:42] Data : DatabaseFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:42] Data : IntegratedInstallSource = E:\SCDPM\
[19.3.2014 9:21:42] Data : SqmOptIn = 2
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : <<< Dialog >>> Progress Page : Entering
[19.3.2014 9:21:42] Information : Function >> MsiSetInternalUI
[19.3.2014 9:21:42] Information : MsiSetInternalUI returned INSTALLUILEVEL_DEFAULT
[19.3.2014 9:21:42] Information : Function >> MsiSetExternalUI
[19.3.2014 9:21:42] Data : Path of main msi = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\msi\msdpm.msi
[19.3.2014 9:21:42] Data : Path of log file = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\DpmSetup.log
[19.3.2014 9:21:42] Information : Getting the string form of report object
[19.3.2014 9:21:42] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:42] Information : Getting the reporting secure connection level for MyDpmServer/MSDPM2012
[19.3.2014 9:21:42] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:42] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : Present Secure Connection Level:0
[19.3.2014 9:21:42] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:42] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:42] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : Deploy reports
[19.3.2014 9:21:42] Data : Path of configuration file of SQL Server Reporting Services = \\MyDpmServer\C$\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : Starting Service:ReportServer$MSDPM2012 on machine:MyDpmServer flag restart:True
[19.3.2014 9:21:47] Information : Starting Service:ReportServer$MSDPM2012 on machine:MyDpmServer flag restart:True
[19.3.2014 9:21:52] Data : Source folder for reports (.rdl files) = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DpmReports
[19.3.2014 9:21:52] Data : Path of dll to invoke = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DlsUILibrary.dll
[19.3.2014 9:21:52] Information : Set report rendering extensions in Reporting Services
[19.3.2014 9:21:52] Information : Set tracing level in Reporting Services
[19.3.2014 9:21:52] Information : Deploy reports
[19.3.2014 9:21:52] Data : Source folder for reports (.rdl files) = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DpmReports
[19.3.2014 9:21:52] Data : Path of dll to invoke = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DlsUILibrary.dll
[19.3.2014 9:21:57] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 192.168.11.35:443
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.ListSecureMethods()
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConnectToReportServerUrl(String RSUrl, Boolean throwExcecption)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConstructReportServerUrl(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.GetReportServerUrl(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportProxyObject(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportRootFolder(String serverName, String instanceName, Boolean recreate)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[19.3.2014 9:21:57] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.11.35:443
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.ListSecureMethods()
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConnectToReportServerUrl(String RSUrl, Boolean throwExcecption)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConstructReportServerUrl(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.GetReportServerUrl(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportProxyObject(String sqlServerName, String sqlInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportRootFolder(String serverName, String instanceName, Boolean recreate)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[19.3.2014 9:21:57] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[19.3.2014 9:21:57] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
[19.3.2014 9:21:58] Information : <<< Dialog >>> Progress Page : Leaving
[19.3.2014 9:21:58] *** Error : Application_ThreadException
[19.3.2014 9:22:17] *** Error : Application_ThreadException
[19.3.2014 9:22:18] *** Error : Application_ThreadException
[19.3.2014 9:22:18] *** Error : Application_ThreadException
[19.3.2014 9:22:19] *** Error : CurrentDomain_UnhandledException

ConfigMgr 2012 Agent Installation permanently failed with Error 1603

We have some clients, where the agent must be reinstalled. But it fails permanently with Error 1603. I have tried the following steps allready:
Delete the CCMSETUP and CCM Folder and start from scratch
Repair WMI by deleting root\ccm
Recreated the WMI Repository
Register all *.dll and *.mof in WBEM
Cleaned up with the ccmclean Tool
We use SCCM 2012 SP1 CU3
The error happens on Vista and Windows 7
From the logs, it looks that something went wrong with the ccmexec service, but I'm not sure. In the Eventlogs are some entries from the Search Service that the Service unexpectly stopped. But not much more.
CCMSETUP.LOG
MSI: Action 11:25:16: CcmRegisterSystemTask. Registers a System Task with WMI.
MSI: Action 11:25:17: CcmRegisterHostingConfiguration. Register configuration for Configuration Manager Client service.
MSI: Action 11:25:17: CcmSetObjectSecurity. Applying security permissions
MSI: Action 11:25:18: CcmSetupLogging. Sets component logging information in WMI.
MSI: Action 11:25:19: SmsSwDistSetCacheConfig. This custom action gets the cache configuration, disables the cache options in control panel if required by the site settings and updates the registry keys accordingly. It also configures the security for the cache
directory.
MSI: Action 11:25:19: CcmRegisterPerfCountersRollback. Rolls back any changes made by CcmRegisterPerfCounters if install fails.
MSI: Action 11:25:19: CcmRegisterPerfCounters. Registers performance counters gathered in the CcmRegisterPerfCountersInit action
MSI: Action 11:25:20: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
MSI: Action 11:25:20: CcmRegisterComponents. Registers components passed in from CcmRegisterComponentsInit
MSI: Action 11:25:20: CcmInstallUtil. Calling InstallUtil.exe to register .net WMI provider
MSI: Action 11:25:20: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission.
MSI: Action 11:25:20: Ngen. Calling NGEN.exe
MSI: Action 11:25:22: InstallServices. Installing new services
MSI: Action 11:25:22: WriteEnvironmentStrings. Updating environment strings
MSI: Action 11:25:22: CcmSetServiceConfig. Sets WMI ServiceRootDir and configures CCMEXEC service.
MSI: Action 11:25:22: CcmRegisterWinTaskRollback. Rolls back the changes made by CcmRegisterWinTask.
MSI: Action 11:25:22: CcmRegisterWinTask. Registers tasks with Windows Task Scheduler.
MSI: Action 11:25:22: Rollback. Rolling back action:
File C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\client.msi installation failed. Error text: ExitCode: 1603 Action: ErrorMessages:
Next retry in 120 minute(s)...
CLIENT.MSI.LOG
MSI (s) (CC:B4) [11:26:01:135]: Executing op: ComponentUnregister(ComponentId={F7DB5D80-2A09-4F1B-BB55-8D69AA9A94A6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
(s) (CC:B4) [11:26:01:137]: Executing op: ComponentUnregister(ComponentId={4942E0A1-7621-4D9A-93B5-AFA1A0B7FCC6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
(s) (CC:B4) [11:26:01:137]: Executing op: ActionStart(Name=CcmStopServiceRollback,Description=Calls CcmStartService. Starts the ccmexec service.,)MSI
(s) (CC:B4) [11:26:01:139]: Executing op: CustomActionRollback(Action=CcmStopServiceRollback,ActionType=3329,Source=BinaryData,Target=CcmStartService,)MSI
(s) (CC:B4) [11:26:01:159]: Creating MSIHANDLE (12483) of type 790536 for thread 6068MSI
(s) (CC:64) [11:26:01:159]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICFD.tmp, Entrypoint: CcmStartServiceMSI
(s) (CC!50) [11:26:01:221]: Creating MSIHANDLE (12484) of type 790531 for thread 5712MSI
(s) (CC!50) [11:26:01:222]: Closing MSIHANDLE (12484) of type 790531 for thread 5712MSI
(s) (CC!50) [11:26:01:222]: Creating MSIHANDLE (12485) of type 790531 for thread 5712[11:26:01]
WARNING: Failed to delete setup in progress time-stamp with error 0x80070002MSI (s) (CC!50)
[11:26:01:222]: Closing MSIHANDLE (12485) of type 790531 for thread 5712MSI (s) (CC:64)
[11:26:01:223]: Closing MSIHANDLE (12483) of type 790536 for thread 6068MSI (s) (CC:B4)
[11:26:01:223]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)MSI
(s) (CC:B4) [11:26:01:223]: Error in rollback skipped. Return: 5MSI
(s) (CC:B4) [11:26:01:223]: Entering MsiProvideAssembly. AssemblyName: Microsoft.ConfigurationManager.AssetProvider.dll,Version="5.0.0.0",Culture="neutral",PublicKeyToken="31bf3856ad364e35", AppContext: , InstallMode: -4MSI
(s) (CC:B4) [11:26:01:223]: Pathbuf: 0, pcchPathBuf: 0MSI (s) (CC:B4) [11:26:01:244]:
MsiProvideAssembly is returning: 1607[11:26:01] The service 'ccmexec' is not installedMSI
(s) (CC:B4) [11:26:01:255]: No System Restore sequence number for this installation.MSI
(s) (CC:B4) [11:26:01:255]: Unlocking ServerMSI (s) (CC:B4) [11:26:01:307]: PROPERTY CHANGE:
Deleting UpdateStarted property. Its current value is '1'.Action ended 11:26:01: INSTALL.
Return value 3.Property(S): UpgradeCode = {252DA259-82CA-4177-B8D0-49C78937BA3E}Property(S):
SourceDir = C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\
Has anybody came around this behavior?
Kind regards Stefan Somogyi

CCMClean.exe is not supported for ConfigMgr 2012, but I guess that you know that :)
Have you tried 'ccmsetup.exe /uninstall', wait for it to complete and then install again?
Perhaps the steps taken in the last comment from this thread can help you:
http://social.technet.microsoft.com/Forums/en-US/98fadc7b-2bdd-4b46-a0cb-ba43ebd10aaf/client-reinstall-failing-on-upgraded-clients?forum=configmanagerdeployment
Regards,
Nickolaj Andersen - MCTS - www.scconfigmgr.com - @Nickolaja

Agent Installation Issue

Hi guys . While installing the agent on an asset Solaris system:
root@system: /var/tmp/OC $ /opt/SUNWxvmoc/bin/agentadm configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
agentadm: Version 12.1.2.2161 launched with args: configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : workarounds configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : db configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
Validating step : sc_console configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
verified sc_console command is OK
Validating step : setup_hmp configure -u root -p /var/tmp/OC/mypasswd
Validating step : scn_agent configure
scn_agent Common Agent Container environment is OK
Validating step : setup_net configure
skipping setup_net step for zone VC.
Validating step : uce_agent configure
Validating step : config_sysconfig configure
Validating step : final configure
End of validation
executing step : workarounds
workaround configuration done.
executing step : db
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
configuring db
INFO: hd_domain_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for Domain Model successful
configuring jobs db
INFO: hd_jobs_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for job manager successful
INFO: db decrypted the password.
executing step : sc_console
verified sc_console command is OK
Configuring sc_console
*checking existing sc_console connections
doing sc-console registration
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
CE: java.net.ConnectException: Connection timed out
Code: 10
ERROR: Connection refused.
sc-console registration failed on [10].
sc-console : Unknown error. *
It does not seem to be connecting . What seems to be the issue here and how can I resolve it ?

Hi,
it looks like the network error I had in the past. Doe haave a firewall between Client and Proxy ?
Is your client connected to more than one network ? If so it can be helpful to use the -a option.
I would check firewall andd routing.
Kind regards
tunix2k

VMM Agent Installation Issues (Was previously installed fine, now refuses to install (ends prematurely)

The VMM agent was installed on two Hyper-V host servers just fine (they were then removed temporarily from SCVMM), but trying to add the servers back into SCVMM it insisted the versions of the agents on the two hosts were unsupported (even though it
installed them) so it requested they were removed before retrying, after removing the agents it now refuses to install them and suggests installing them locally. Installing them on the local host manually just causes the installation to end prematurely.
The firewall is completely disabled
UAC is turned off
I have also tried running from elevated cmd using msiexec /I
Any ideas??

Hi,
Please refer below as it has some useful troubleshooting steps that might help you.
http://support.microsoft.com/kb/2742275
As you have tried from an elevated cmd, have you tried restarting Add Host job in VMM as the last step?
http://networkerslog.blogspot.com/2013/07/unable-to-add-hyper-v-host-due-to.html
You can use PowerShell to reassociate the Host.
http://blogs.technet.com/b/jonjor/archive/2013/02/15/managing-hyper-v-hosts-using-virtual-machine-manager-fails-with-error-0x8033803b.aspx
Let me know of any development.
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Agent Installation issue - SSH

I've tried to do the push method, and get SSH equivalence issues, even though our 2 node RAC has SSH equivalence set, I still can't get the push to work. The 2 node rac has user equivalence with a password. However, when I enter the following command from the OMS machine:
./sshUserSetup.sh -user oracle -hosts "adc17-ldb.sas.its.nyu.edu" -verify, i get ssh equivalence issues.
Also, when doing the wget http method from the hosts, I get return code = 255.
Has anyone seen these issues.

What exatcly the error you get
What the platform and oms version

DPM 2012 VSS Errors

We have our DPM 2012 R2 installation on Windows 2008 R2 servers. We encounter failures some of the time on our Full Express Backups on Friday evenings where we get VSS errors in the event logs.
Event 12298
Event 12289
We haven't encountered these issues until recently. Is there any idea on how to remedy these. I just installed DPM 2012 R2 this week so I am hoping it helps. But does anyone know if there is a hotfix or something for this in case it does not. I read about
these events having a hotfix for Windows 2003 servers but not Win2K8?

Event 12289
Volume Shadow Copy Service error: Unexpected error DeviceIoControl(\\?\Volume{XXXXXXX]). hr = 0x80070057, The parameter is incorrect.
Operation:
Processing EndPrepareSnapshots
Context:
Execution Context: System Provider
Event 12298
Volume Shadow Copy Service error: The I/O writes cannot be held during the shadow copy creation period on volume \\?\Volume{XXXXXXXXX}\. The volume index in the shadow copy set is 0. Error details: Open[0x00000000, The operation completed successfully.
], Flush[0x00000000, The operation completed successfully.
], Release[0x00000000, The operation completed successfully.
], OnRun[0x80042314, The shadow copy provider timed out while holding writes to the volume being shadow copied. This is probably due to excessive activity on the volume by an application or a system service. Try again later when activity on the volume is reduced.

DPM 2012 Tape library changer sharing

I setup tape library sharing on one of my three DPM 2012 servers. I then retired that server. I'm now trying to share the changer out on another server. I'm able to see the changer in the device settings of the new DPM server. I can see the tape library
in the administrator console, but when I run a rescan it fails with the following errors, referencing my retired DPM 2012 servers.
DPM failed to communicate with the protection agent on CCDPM2012SRV3 because access is denied. (ID 42 Details: Access is denied (0x80070005))
DPM failed to communicate with ccdpmp01.ccounty.com because the computer is unreachable. (ID 41 Details: The RPC server is unavailable (0x800706BA))
Is there a config. setting within DPM that may be looking at these server?

Hi,
You will need to
remove library sharing, then re-enable library sharing so you can switch library control servers.
There is a good chance that re-enabling library sharing may fail with an error "Failed
to execute SharedLibraryConfigureDb.sql on DPMSERVER" because DPM 2012 has an issue where it does not clean up properly - this is being addressed in a future Update.
If that does occur, then open a support ticket and have the DPM Support engineer reference ID2785571 to help cleanup - you will not be charged since it's a know issue.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

SCOM 2012 Agent - Best Practices with Base Images

I've read through the
SCOM 2012 agent installation methods technet article, as well as how to
install the SCOM 2012 agent via command line, but don't see any best practices in regards to how to include the SCOM 2012 agent in a base workstation image. My understanding is that the SCOM agent's unique identifier is created at the time of client installation,
is this correct? I need to ensure that this is a supported configuration before I can recommend it.
If it is supported, and it does work the way I think it does, I'm trying to find out a way to strip out the unique information so that a new client GUID will be created after the machine is sysprepped, similar to how the SCCM client should be stripped of
unique data when preparing a base image.
Has anyone successfully included a SCOM 2012 (or 2007 for that matter) agent in their base image?
Thanks,
Joe

Hi
It is fine to build the agent into a base image but you then need to have a way to assign the agent to a management group. SCOM does this via AD Integration:
http://technet.microsoft.com/en-us/library/cc950514.aspx
http://blogs.msdn.com/b/steverac/archive/2008/03/20/opsmgr-ad-integration-how-it-works.aspx
http://blogs.technet.com/b/jonathanalmquist/archive/2010/06/14/ad-integration-considerations.aspx
http://thoughtsonopsmgr.blogspot.co.uk/2010/07/active-directory-ad-integration-when-to.html
http://technet.microsoft.com/en-us/library/hh212922.aspx
http://blogs.technet.com/b/momteam/archive/2008/01/02/understanding-how-active-directory-integration-feature-works-in-opsmgr-2007.aspx
You have to be careful in environments with multiple forests if no trust exists.
http://blogs.technet.com/b/smsandmom/archive/2008/05/21/opsmgr-2007-how-to-enable-ad-integration-for-an-untrusted-domain.aspx
http://rburri.wordpress.com/2008/12/03/untrusted-ad-integration-suppress-misleading-runas-alerts/
You might also want to consider group policy or SCCM as methods for installing agents.
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

DPM 2012 Agent installation issue

Similar Messages

Maybe you are looking for