DPM 2012 R2 agent update on Windows 2003 server x64 - Exchange
According to the release notes on http://blogs.technet.com/b/dpm/archive/2014/04/23/now-available-update-rollup-2-for-system-center-2012-r2-data-protection-manager.aspx the following workloads are supported on Win2K3 with DPM2012 R2 UR2:
SQL 2005
SQL 2008
SQL 2008 R2
SharePoint 2007
Does that mean protecting Exchange 2007 on Win2K3 is no longer an option after upgrading to DPM 2012 R2 (UR2)? It works on DPM 2012 SP1 but I need to know if it will continue to work after upgrading.
(This question follows on from this thread http://social.technet.microsoft.com/Forums/en-US/c425421b-b726-4125-82fc-beae8947722c/dpm-2012-r2-agent-update-on-windows-2003-server-x64?forum=dpmsetup which was marked as 'answered')
Hi,
Yes, Exchange 2007 backup will continue to work. I think that due to the timeframe of the UR2 release not all workloads were able to be re-certified, thus the limit in supported workloads.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
DPM 2012 R2 agent update on Windows 2003 server x64
Hi,
I have an old windows 2003 server x64 protected by DPM 2012 Sp1. After DPM upgrade to 2012 R2 I cannot update DPM Agent on server. If I try to update agent manually error message is : agentsetup.exe is not a valid win32 application.
Mihaicommand back,
edit: it seems like a reboot is definitely needed to get it working
got it working like described here: http://support.microsoft.com/kb/2958100/en-us
Install the Microsoft Visual C++ 2008 Redistributable on Windows Server 2003 servers if it is not already installed.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2008 Redistributable Package (x64)
Note The following error occurs if the C++ redistributable is not installed:
Data Protection Manager Setup
Could not load the setup launch screen. Please contact Microsoft Product Support.
Copy the Windows Server 2003 Agent installer that is located on in the DPM server to the Windows Server 2003 server, and then install the agent.
64-bit: <var>DPM Installation Location</var>\DPM\agents\RA\4.2.1226.0\amd64\1033\DPMAgentInstaller_Win2K3_AMD64.exe
32-bit: <var>DPM Installation Location</var>\DPM\agents\RA\4.2.1226.0\i386\1033\
DPMAgentInstaller_Win2K3_i386.exe
Run the following command at an administrative command prompt:
cd DPM Agent Installation Location\DPM\bin\setdpmserver.exe –dpmservername DPM Server Name
Run the following Windows Powershell cmdlet to establish a connection with the DPM server:
Attach-ProductionServer.ps1 DPMServerNameProductionServerNameUserNamePasswordDomain
regards
Stefan -
How to view failed updates on Windows 2003 Server ?
Hello,
Can anyone tell me how I can view what Windows Updates failed and why, on a Windows 2003 server that uses Configuration Manager?
Thanks
StuartYou won't find the solution in ConfigMgr. It has done it's job and the updates have been delivered. The fact that the updates cannot install is a Windows problem. You need to be looking at the EVENT logs.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Install Oracle 10g R2 on Windows 2003 server x64
Hello,
I'm trying to install 10g on 2003 server x64, but everytime the progress window appears after getting the inital Orace Installer window, it just disappears, no messages.
Anyone have any ideas? I've got 1GB memory and about 100GB on hard drive available.
ThanksGot the same issue.
I'm trying to install 10g on 2003 server x64, but
but everytime the progress window appears after
getting the inital Orace Installer window, it just
disappears, no messages.Looks like a bug but the question is who's bug is that. sun java ?
And there is a java error log file in a temp directory:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000000816a3eb, pid=2508, tid=552
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_04-b05 mixed mode)
# Problematic frame:
# V [jvm.dll+0x16a3eb]
--------------- T H R E A D ---------------
Current thread (0x0000000001b87dd0): JavaThread "main" [_thread_in_vm, id=552]
siginfo: ExceptionCode=0xc0000005, reading address 0x0000000000000000
Registers:
EAX=0x0000000001b87dd0, EBX=0x0000000001b87dd0, ECX=0x0000000000000002, EDX=0x0000000000000fb8
ESP=0x000000000012eef0, EBP=0x000000000300c160, ESI=0x0000000008463f60, EDI=0x0000000000000000
EIP=0x000000000816a3eb, EFLAGS=0x0000000000010246
Top of Stack: (sp=0x000000000012eef0)
0x000000000012eef0: 0000000000000009 0000000001b8ba10
0x000000000012ef00: 0000000001b8bd48 00000000080c9955
0x000000000012ef10: 0000000001b8bce8 0000000001b8bce8
0x000000000012ef20: 00000000083f7cc0 0000000001b87f18
0x000000000012ef30: 0000000000000000 00000000508e6c00
0x000000000012ef40: 000000001001caa1 000000000816a320
0x000000000012ef50: 0000000008463f60 000000000300c160
0x000000000012ef60: 0000000000000000 0000000004f943fd
0x000000000012ef70: 0000000001b87dd0 0000000001b87dd0
0x000000000012ef80: 000000000012f118 00000000508e6c00
0x000000000012ef90: 0000000000000000 0000000001b87dd0
0x000000000012efa0: 000000000300c080 000000000300c120
0x000000000012efb0: 000000000012f118 000000000012f110
0x000000000012efc0: 000000000012f0e8 0000000010027637
0x000000000012efd0: 000000000012f158 0000000000000000
0x000000000012efe0: 0000000000000000 00000000508e6c08
Instructions: (pc=0x000000000816a3eb)
0x000000000816a3db: 06 00 00 00 8b 0d 13 d7 2f 00 ff 15 55 be 20 00
0x000000000816a3eb: 48 8b 0f 4c 8b b8 e0 00 00 00 49 8b 47 18 4d 8b
Stack: [0x0000000000030000,0x0000000000130000), sp=0x000000000012eef0, free space=1019k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x16a3eb]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;ZILjava/lang/String;)V+0
j oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;I)V+9
j oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V+7
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.setInstallerKey(Ljava/lang/String;)V+7
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;)V+70
j oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+21
j oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(Z)I+73
j oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(Z)I+249
j oracle.sysman.oii.oiic.OiicPullSession.doOperation(Z)I+11
j oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(Z)I+100
j oracle.sysman.oii.oiic.OiicInstaller.run()V+48
j oracle.sysman.oii.oiic.OiicInstaller.runInstaller([Ljava/lang/String;)I+106
j oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller()I+13
j oracle.sysman.oio.oioc.OiocOneClickInstaller.startRun()V+6
j oracle.sysman.oio.oioc.OiocOneClickDB.nextClicked()V+3
j oracle.sysman.oio.oioc.OiocOneClickInstaller.main([Ljava/lang/String;)V+59
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0000000003e1c030 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2956]
0x0000000003e1bd80 JavaThread "Image Fetcher 1" daemon [_thread_in_Java, id=308]
0x0000000003e1bad0 JavaThread "PrepareInvTreeThread" [_thread_blocked, id=1932]
0x0000000003e1b570 JavaThread "CursorIdler" [_thread_blocked, id=1520]
0x0000000003e1b2c0 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=3012]
0x0000000003e1b010 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=2148]
0x0000000003e1ad60 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2472]
0x0000000001b898b0 JavaThread "AWT-Shutdown" [_thread_blocked, id=2452]
0x0000000001b89600 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2988]
0x0000000001b890a0 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1004]
0x0000000001b88df0 JavaThread "CompilerThread1" daemon [_thread_blocked, id=2132]
0x0000000001b88b40 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2032]
0x0000000001b88890 JavaThread "AdapterThread" daemon [_thread_blocked, id=1568]
0x0000000001b885e0 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=184]
0x0000000001b88330 JavaThread "Finalizer" daemon [_thread_blocked, id=2656]
0x0000000001b88080 JavaThread "Reference Handler" daemon [_thread_blocked, id=680]
=>0x0000000001b87dd0 JavaThread "main" [_thread_in_vm, id=552]
Other Threads:
0x00000000003358c0 VMThread [id=936]
0x0000000000335bf0 WatcherThread [id=724]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 9984K, used 2385K [0x000000005d210000, 0x000000005e090000, 0x0000000061210000)
eden space 6784K, 20% used [0x000000005d210000,0x000000005d36d9a8,0x000000005d8b0000)
from space 3200K, 30% used [0x000000005dba0000,0x000000005dc96e18,0x000000005dec0000)
to space 3008K, 0% used [0x000000005d8b0000,0x000000005d8b0000,0x000000005dba0000)
PSOldGen total 11456K, used 4980K [0x0000000055210000, 0x0000000055d40000, 0x000000005d210000)
object space 11456K, 43% used [0x0000000055210000,0x00000000556ed208,0x0000000055d40000)
PSPermGen total 28096K, used 21641K [0x0000000050010000, 0x0000000051b80000, 0x0000000055210000)
object space 28096K, 77% used [0x0000000050010000,0x0000000051532a68,0x0000000051b80000)
Dynamic libraries:
0x0000000000400000 - 0x0000000000411000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\javaw.exe
0x0000000078ec0000 - 0x0000000078ff9000 C:\WINDOWS\system32\ntdll.dll
0x0000000078d40000 - 0x0000000078eb2000 C:\WINDOWS\system32\kernel32.dll
0x000007ff7fee0000 - 0x000007ff7ffe5000 C:\WINDOWS\system32\ADVAPI32.dll
0x000007ff7fd30000 - 0x000007ff7fed9000 C:\WINDOWS\system32\RPCRT4.dll
0x0000000078c30000 - 0x0000000078d3c000 C:\WINDOWS\system32\USER32.dll
0x000007ff7fc90000 - 0x000007ff7fd29000 C:\WINDOWS\system32\GDI32.dll
0x000007ff7fc00000 - 0x000007ff7fc86000 C:\WINDOWS\system32\MSVCRT.dll
0x0000000008000000 - 0x00000000084ce000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\server\jvm.dll
0x000007ff7e060000 - 0x000007ff7e0b0000 C:\WINDOWS\system32\WINMM.dll
0x0000000010000000 - 0x0000000010009000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\hpi.dll
0x000007ff7e1b0000 - 0x000007ff7e1c0000 C:\WINDOWS\system32\PSAPI.DLL
0x000007ff7e7f0000 - 0x000007ff7e812000 C:\WINDOWS\system32\Secur32.dll
0x0000000000380000 - 0x0000000000390000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\verify.dll
0x0000000000390000 - 0x00000000003ba000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\java.dll
0x00000000003c0000 - 0x00000000003d4000 C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\zip.dll
0x0000000003f40000 - 0x0000000004137000 C:\temp\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\awt.dll
0x000007ff78d50000 - 0x000007ff78d91000 C:\WINDOWS\system32\WINSPOOL.DRV
0x000007ff7d320000 - 0x000007ff7d359000 C:\WINDOWS\system32\IMM32.dll
0x000007ff7ece0000 - 0x000007ff7ef52000 C:\WINDOWS\system32\ole32.dll
0x000007ff77060000 - 0x000007ff770df000 C:\WINDOWS\system32\uxtheme.dll
0x000007ff79190000 - 0x000007ff79202000 C:\WINDOWS\system32\ddraw.dll
0x000007ff793e0000 - 0x000007ff793e8000 C:\WINDOWS\system32\DCIMAN32.dll
0x00000000042a0000 - 0x00000000042fc000 C:\temp\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\fontmanager.dll
0x000007ff7a240000 - 0x000007ff7a2df000 C:\WINDOWS\system32\MSCTF.dll
0x0000000004f50000 - 0x0000000004f81000 C:\temp\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\jpeg.dll
0x0000000004f90000 - 0x0000000004fa5000 C:\temp\OraInstall2006-06-04_05-24-17PM\oui\lib\win64\oraInstaller.dll
0x000007ff7fbf0000 - 0x000007ff7fbfb000 C:\WINDOWS\system32\VERSION.dll
0x00000000050b0000 - 0x00000000050ca000 C:\temp\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\net.dll
0x000007ff77150000 - 0x000007ff77180000 C:\WINDOWS\system32\WS2_32.dll
0x000007ff77140000 - 0x000007ff7714c000 C:\WINDOWS\system32\WS2HELP.dll
0x0000000005150000 - 0x000000000515a000 C:\temp\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\nio.dll
0x000007ff7f190000 - 0x000007ff7fb98000 C:\WINDOWS\system32\shell32.dll
0x000007ff7ef60000 - 0x000007ff7effb000 C:\WINDOWS\system32\SHLWAPI.dll
0x0000000005320000 - 0x00000000054a7000 C:\WINDOWS\WinSxS\amd64_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.1830_x-ww_ACED72AF\comctl32.dll
VM Arguments:
jvm_args: -Doracle.installer.library_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\lib\win64 -Doracle.installer.oui_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=H:\archive\oracle102010x64\install -Doracle.installer.jre_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0 -Doracle.installer.exec_location=H:\archive\oracle102010x64\install\setup.exe -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.prereqConfigLoc= -Xmx192m
java_command: oracle.sysman.oio.oioc.OiocOneClickInstaller C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0\bin\javaw.exe -Doracle.installer.library_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\lib\win64 -Doracle.installer.oui_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=H:\archive\oracle102010x64\install -Doracle.installer.jre_loc=C:\TEMP\OraInstall2006-06-04_05-24-17PM\jre\1.5.0.0.0 -Doracle.installer.exec_location=H:\archive\oracle102010x64\install\setup.exe -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.prereqConfigLoc= -mx192m -cp C:\TEMP\OraInstall2006-06-04_05-24-17PM;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\OraInstaller.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\oneclick.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\xmlparserv2.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\srvm.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\share.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\OraInstallerNet.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\xml.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\emCfg.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\ojmisc.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstImages.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_de.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_es.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_fr.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_it.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_ja.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_ko.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_pt_BR.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_zh_CN.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\InstHelp_zh_TW.jar;C:\TEMP\OraInstall2006-06-04_05-24-17PM\oui\jlib\orac
Environment Variables:
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 1
CPU:total 2 amd64 3dnow ht
Memory: 4k page, physical 2096504k(1306900k free), swap 4059216k(3507592k free)
vm_info: Java HotSpot(TM) 64-Bit Server VM (1.5.0_04-b05) for windows-amd64, built on Jun 3 2005 01:43:58 by "java_re" with unknown MS VC++:1400 -
DPM 2012 UR3 Agent Update Error: HRESULT E_FAIL...DCOM Error
My DPM Server is Windows 2008 R2 SP1 with a locally installed SQL and DPM Server and fully patched. My Workstations are all Windows 7 Ultimate x64, fully patched. I have manually installed the DPM RTM Agent and pushed the UR2 update from the DPM Server
without any challenges or issues. I have SCEP running with process exclusions for the DPM services on the WS and DPM Server. I’ve been running DPM 2012 RTM and then UR2 without any issues or challenges to-date.
I have recently updated my DPM 2012 Server from UR2 to UR3 and pushed out all the Agent Updates, which appeared to go successfully from the DPM Console perspective. I spot checked a few systems, 1 workstation (WS) and 1 server, everything looked good. A
couple of days after this I noticed 2 of my workstations failed backing up to Tape. I noticed the recovery options available for these WS’s have stopped updating hours after pushing the UR3 Agent update. The 2 WS’s I'm troubleshooting have a little different
scenario. I have 2 other WS’s that were updated in the same manner and are working perfectly.
Both WS cannot connect to the DPM Server and displays this DCOM Error:
"ERROR:ERROR HRESULT E_FAIL has been returned from a call to a COM component."
The 1st WS DPM Client has a Yelow Sign over-lay and "Administrator has not configured backups." when you hover over it.
The 2nd WS does not the Yellow Sign over-lay.
All the properties of the Local DPM Client Console 'Summary and Protected item' tabs are not updated on the 1st WS but are on the 2nd WS.
1st WS process:
The Recovery Tab shows the available recover dates to choice from.
I can expand one of the backup dates, folders and copy a file to this system.
I can view my previous recovery Points from the console dating back to when I updated the Agents.
I’ve validated the DCOM settings on both WS's compared to a WS that is working, they are the same.
I uninstalled the agent manually, then copied and reinstalled the new UR3 Agent Version with the same outcome.
I uninstalled the new version and reinstalled the previous version, same error.
I then proceeded with upgrading UR2 agent version installing the UR3 version over the top, same error.
I logged on to this WS as the Domain Admin, removed and reinstalled the UR3 version, same error.
I removed, applied and then re-added the DPM server to the local WS DPM and DCOM Groups.
I removed, applied and then re-added the WS from the Groups on the DPM Server.
I’m able to see, ping and view other backup folders presented on the DPM server on this WS.
In the DPM Console I am able to connect to this Workstation successfully from the Administrative, Agent Space.
The DPMClientProtectionCurr.errlog file shows this repeatedly:
0FC0
065C 10/13 05:02:32.499
03 service.cpp(298)
[000000000021FD90]
ACTIVITY
CService::AnnounceServiceStatus
0FC0
0D18 10/13 05:02:33.059
33 dlsclientprotection.cpp(778)
[00000000002BC850]
NORMAL
Connecting to DPM Server: (<Server.FQDN>)
0FC0
0D18 10/13 05:02:33.171
33 dlsclientprotection.cpp(861)
[00000000002BC850]
WARNING Failed: Hr: = [0x80004005] : Failed to set client OS details - ClientName:<WS.FQDN>, ClientOSVersion:6.1.7601, OSType:2, AgentVersion: 4.0.1920.0
0FC0
0D18 10/13 05:02:33.171
33 dlsclientprotection.cpp(1490)
[00000000002BC850]
WARNING Failed: Hr: = [0x80004005] : Failed to get connection to DPM server: lVal : ConnectToDPMServer(bstrClientMachineName, &pIUnknown, &fConnectionSuccessful, &dCurrentStatus,
exceptionResult)
The
DPMRACurr.eerlog show this for both WS's:
0EF0 1110 10/13 04:05:02.157 22 genericthreadpool.cpp(824) [000000000093C360] NORMAL Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[20]
0EF0 1110 10/13 04:05:02.157 03 miscellaneousutils.cpp(918) NORMAL Error:ERROR_UNKNOWN_PRODUCT, While detecting DPM version. Assuming DPM isnt installed.
And this one repeatedly:
0BE8 08EC 10/13 13:59:40.404 29 radefaultsubtask.cpp(382) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {DB3F138D-DE37-414D-BADC-5A161C6E7E1C}
0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(546) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand,
pOvl)
0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(751) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
The 2nd WS Process:
I did not remove or touch the local agent installation because the information is populated on this client’s agent properties fields.
I can see the folder selections I’ve chosen to be backed up by the protection group configuration.
When i open the Agent UI I receive the sam DCOM error.
I also receive a different error message on this WS when I try and do a Sync Now from the General Tab: Failed to trigger synchronization.
I was able to perform a consistency check on this WS that completed successfully from the DPM server.
I’ve validated the networking configuration settings are correct.
I flushed local DNS cache.
Thanks,
PaulHi,
I have a Windows 7 x64 machine that exhibits this problem. It seems that it is not caused on the client side but on the server side.
In our case the server logs the following every time the client tries to connect:
WARNING Verify disconnected client failed with exception: System.ArgumentException: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch: "<machinename>". Hinzuzufügender Schlüssel: "<machinename>".
(Translation: Element has already been added. Key in Table: "<machinename>". Key to be added: "<machinename>".
I have uninstalled the agent on the client several times. One time I have seen the following error message on the server side:
Deployment.cs(2815) NORMAL Removing all agent records for server[<machinename>] from table InstalledAgent.
ntlmutils.cpp(185) WARNING Failed: Hr: = [0x80070002] : Error trying to open key [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\NtlmAuthData\<machinename>]
SchedulerImpl.cs(166) NORMAL Entering DeRegister, JobDefID: bafe2b8b-53b2-4694-aa28-9e2c6c152d51
Catalog.cs(1006) WARNING No retry on exception The specified @name ('') does not exist. while executing sp_delete_alert
Catalog.cs(1013) WARNING SqlException encountered, SqlRetryCommand diag details - SqlCommandText => Name=msdb.dbo.sp_delete_alert, CommandType=StoredProcedure
Catalog.cs(1013) WARNING CommandDiagInfo => CanRetry=False, CommandTimeout=3600
Catalog.cs(1013) WARNING CommandParams => Count=2, InTx=True
Catalog.cs(1013) WARNING Param[0] => ParameterName=@name | Value= | Size=0 | DbType=NVarChar | Direction=Input | IsNullable=False
Catalog.cs(1013) WARNING Param[1] => ParameterName=@RETURN_VALUE | Value=1 | Size=0 | DbType=Int | Direction=ReturnValue | IsNullable=False
EventManager.cs(98) NORMAL Publishing event from SchedulerImpl.cs(838): JobScheduleChange, [JobDefID=bafe2b8b-53b2-4694-aa28-9e2c6c152d51]
Errors on the client side appear the moment the agent is re-added to the DPM server (I use "connect agent" instead of "install agent"). After that moment I get the message "Error connection to the DPM server. Error: a COM-component returned E_FAIL" every time
I open the DPM client. This is mirrored by the Verify error mentioned above on the server side.
To me it seems that parts of the machine config are still in the MSDB after removal (maybe caused by the registry error). If this client is connected again, the orphaned database entries cause the Verify error
If that's true, how could we get rid of those entries? Would it help to rename the client?
Uwe -
Where to get java 1.4.2 for Windows 2003 Server x64?
Hello, I am installing Netweaver 7.0 SR3 on Windows Server 2003 Standard x64 running on a Xeon 5100 which I believe is i386 64-bit. I tried to use the JDK 1.4.2 which is pointed to by sapnote 941595. However, this appears to be for AMD and will not install. SAPinst will not accept the 32-bit version of that JDK either. Could you please tell me where I can get the correct version of the JDK? Also, as an experiment I tried using the latest 64-bit version 1.6 for my machine and SAPinst got a couple stops past the ABAP import before it failed with a Java error. Is there a way to completely uninstall everything and start over? Thanks - Chris Piret
Hi,
With the links from note 941595, you cannot download release 1.4.2_13.
I had to use this link
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=j2sdk-1.4.2_13-amd64-JPR@CDS-CDS_Developer
that I got from this forum.
This JDK download is a mess and I think, we, the customers, pay or what seems to be bad relationship between SAP and SUN.
IMHO, the JDK should be included in the installation box.
I get the database software in the box, why not the JDK ?
Regards,
Olivier -
Unresolved symbols in Windows 2003 server X64
Hi,
I am unable to resolve symbols while linking directly to Timesten's libs in Windows 2003 X64. I do not want to use Microsoft's ODBC driver manager, however.
Here is my Timesten version:
TimesTen Release 7.0.3.0.0 (64 bit NT) (tt70_64:17001) 2007-09-19T15:59:10Z
I am adding the following additional dependencies in Visual Studio 2005:
G:\TimesTen\tt70_64\lib\tten70.lib
G:\TimesTen\tt70_64\lib\ttdv70.lib
and below are the results of my build:
1>MYTIMESTEN2.obj : error LNK2019: unresolved external symbol SQLError@32 referenced in function main
1>MYTIMESTEN2.obj : error LNK2019: unresolved external symbol SQLDriverConnect@32 referenced in function main
1>MYTIMESTEN2.obj : error LNK2019: unresolved external symbol SQLAllocConnect@8 referenced in function main
1>MYTIMESTEN2.obj : error LNK2019: unresolved external symbol SQLAllocEnv@4 referenced in function main
1>G:\Documents and Settings\Administrator\My Documents\Visual Studio 2005\Projects\MYTIMESTEN2\Debug\MYTIMESTEN2.exe : fatal error LNK1120: 4 unresolved externals
any ideas as to why my build is failing?
Thanks,
JuanPost Author: ejthunder
CA Forum: Deployment
Hello,
Crystal Reports XI and XI R2 are not supported on 64 bit machines. I have not heard of any plans to change this. As you've discovered - the only version of Crystal Reports that is supported on a 64 bit machine is CR.NET 2005 (v10.2), the version that ships with VS2005.
Your options are to downgrade your application to use bundled CR.NET 2005 or to deploy your CR XI R2 .NET application to a 32 bit machine.
EJ -
DB console Agent Unreachable in Windows 2003 server
Hi All,
I am facing a problem with one of the production database's DB console. Database verison is 10.1.0.5.0.
Once I logged in to the DB console I am noticing a status message saying Agent Unreachable.
I am not getting any updated report about the database.
I have done restart of DB OracleDB console<DB name> services. But no luck.
Kindly help me in resolving this issue ASAP.
regarrdsl.
ArunaHi,
Please find the following last 100 lines taken from DB console log file
-------------- [OracleDBConsoleTC08PRD] ------------
EMDROOT=G:\oracle\product\10.1.0\db_1
ORACLE_HOME=G:\oracle\product\10.1.0\db_1
EMDSTATE=G:\oracle\product\10.1.0\db_1\IL16NTTCLDB1_TC08PRD
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
10/28/09 12:31:37 Job Process API is available
10/28/09 12:31:37 Start pending...
10/28/09 12:31:37 Verifying dbconsole is not started already. Command line "G:\oracle\product\10.1.0\db_1\bin\emctl.bat" istatus dbconsole
10/28/09 12:31:40 dbconsole launch commandline is "G:\oracle\product\10.1.0\db_1\bin\emctl.bat" istart dbconsole
10/28/09 12:31:40 Tracking process launch...
10/28/09 12:32:12 Received exitCode 3 from emctl istatus
10/28/09 12:32:12 dbconsole started
10/29/09 06:43:19 Recieved ServCtrlHdlr command, 1
10/29/09 06:43:19 Stopping dbconsole
10/29/09 06:43:19 Launching stop EMD process...
10/29/09 06:43:19 Waiting for stop EMD process to exit. numRetries=74
10/29/09 06:43:23 Stop process has exited with exitCode: 0
10/29/09 06:43:23 Waiting for emwd process to exit. numRetries=74
10/29/09 06:43:23 Watchdog process exited with exit code 55
10/29/09 06:43:23 Signal Shutdown event.
10/29/09 06:43:23 Shutdown thread exited.
10/29/09 06:43:23 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleTC08PRD] ------------
EMDROOT=G:\oracle\product\10.1.0\db_1
ORACLE_HOME=G:\oracle\product\10.1.0\db_1
EMDSTATE=G:\oracle\product\10.1.0\db_1\IL16NTTCLDB1_TC08PRD
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
10/29/09 06:43:57 Job Process API is available
10/29/09 06:43:57 Start pending...
10/29/09 06:43:57 Verifying dbconsole is not started already. Command line "G:\oracle\product\10.1.0\db_1\bin\emctl.bat" istatus dbconsole
10/29/09 06:44:01 dbconsole launch commandline is "G:\oracle\product\10.1.0\db_1\bin\emctl.bat" istart dbconsole
10/29/09 06:44:01 Tracking process launch...
10/29/09 06:44:36 Did not hear back from emctl istatus.
10/29/09 06:44:36 Waiting a further 5 secs...
10/29/09 06:44:41 Did not hear back from emctl istatus.
10/29/09 06:44:41 Waiting a further 5 secs...
10/29/09 06:44:46 Did not hear back from emctl istatus.
10/29/09 06:44:46 Waiting a further 5 secs...
10/29/09 06:44:51 Did not hear back from emctl istatus.
10/29/09 06:44:51 Waiting a further 5 secs...
10/29/09 06:44:56 Did not hear back from emctl istatus.
10/29/09 06:44:56 Waiting a further 5 secs...
10/29/09 06:45:01 Did not hear back from emctl istatus.
10/29/09 06:45:01 Waiting a further 5 secs...
10/29/09 06:45:06 Did not hear back from emctl istatus.
10/29/09 06:45:06 Waiting a further 5 secs...
10/29/09 06:45:11 Did not hear back from emctl istatus.
10/29/09 06:45:11 Waiting a further 5 secs...
10/29/09 06:45:16 Did not hear back from emctl istatus.
10/29/09 06:45:16 Waiting a further 5 secs...
10/29/09 06:45:21 Did not hear back from emctl istatus.
10/29/09 06:45:21 Waiting a further 5 secs...
10/29/09 06:45:26 Did not hear back from emctl istatus.
10/29/09 06:45:26 Waiting a further 5 secs...
10/29/09 06:45:31 Did not hear back from emctl istatus.
10/29/09 06:45:31 Waiting a further 5 secs...
10/29/09 06:45:34 dbconsole exited with retCode 55.
10/29/09 06:45:34 Check G:\oracle\product\10.1.0\db_1\IL16NTTCLDB1_TC08PRD\sysman\log\emdbconsole.nohup for details
-------------- [OracleDBConsoleTC08PRD] ------------
EMDROOT=G:\oracle\product\10.1.0\db_1
ORACLE_HOME=G:\oracle\product\10.1.0\db_1
EMDSTATE=G:\oracle\product\10.1.0\db_1\IL16NTTCLDB1_TC08PRD
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
10/29/09 06:47:52 Job Process API is available
10/29/09 06:47:52 Start pending...
10/29/09 06:47:52 Verifying dbconsole is not started already. Command line "G:\oracle\product\10.1.0\db_1\bin\emctl.bat" istatus dbconsole
10/29/09 06:47:54 dbconsole may already be running. termStatus=3 -
Dreamweaver 8.0.2 update under windows 2003
sorry, I using windows 2003 x64 R2, dreamweaver work fine,
but when i try to install the update 8.0.2 it remain in the task
manager of windows and don't update dreamweaver, how can i resolve
this problem? thank you!Windows 2003 Server x64 isn't a tested OS for DW 8. That
said, please send
us a bug report so we can get your contact info and more info
if we need it:
http://www.adobe.com/go/wish
David Alcala
Adobe Product Support -
Oracle 10gR2 (10.2.0.1) on Windows 2003 Server
I have installed the above version on Windows 2003 Server(x64). Now we are planning on clustering the same for production environment. I would like to know the following.
1. Can std edition can be installed on this cluster?
2. If so, what are the components that has to be installed?
3. If only EE will work for clustering, we are not going to do RAC? what is the other source?
Any information/links for the above information is greatly appreciated.
Thank you in advance.Dear,
You can go for OracleFS(failsafe). It is a Acive Passive clustering method unlike RAC. -
OUI-25031 Cluster Configuration Assistant Fails Windows 2003 server RAC
Hi All
I am installing RAC on Windows 2003 Server X64, Dell PowerEdge 2950 Servers with iSCSI Storage.
I have 3 Network cards on each node which are configured like this
# Public
10.2.0.8 USTISDB-1.USTIS.Brgpoint.com USTISDB-1 --- in DNS
10.2.0.9 USTISDB-2.USTIS.Brgpoint.com USTISDB-2
#Virtual
10.2.0.10 USTISDB-1-vip.USTIS.Brgpoint.com USTISDB-1-vip --- in DNS
10.2.0.11 USTISDB-2-vip.USTIS.Brgpoint.com USTISDB-2-vip
#Private
192.168.2.2 USTISDB-1-priv.USTIS.Brgpoint.com USTISDB-1-priv --- in Hosts file
192.168.2.3 USTISDB-2-priv.USTIS.Brgpoint.com USTISDB-2-priv
#iSCSI Storage
192.168.1.2 Storage --- in DNS
Everything Pings everything.
When I start the installation , it installs clusterware and completes the remote operations but fails at cluster configuration window.
After checking the logs I found the list of failed commands and it says
INFO: Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
and then I checked E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands and i says
rem Copyright (c) 1999, 2005, Oracle. All rights reserved.
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
E:\oracle\product\10.2.0\crs/bin/racgons.exe add_config USTISDB-1.USTIS.Brgpoint.com:6200 USTISDB-2.USTIS.Brgpoint.com:6200
E:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:public "private"/192.168.2.0:cluster_interconnect
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "USTISDB-1,USTISDB-2" -nodevips "USTISDB-1//255.0.0.0/public,USTISDB-2//255.0.0.0/public"
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/cluvfy.bat stage -post crsinst -n "USTISDB-1,USTISDB-2"
Please help, Any help will be highly appreciated.
Edited by: user651560 on Nov 13, 2008 3:24 PME:\Staging\102010_win64_x64_clusterware\clusterware\cluvfy>runcluvfy stage -pre crsinst -n ustisdb-1,ustisdb-2 -verbose
The system cannot find the file specified.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "USTISDB-1"
Destination Node Reachable?
ustisdb-1 yes
ustisdb-2 yes
Result: Node reachability check passed from node "USTISDB-1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
ustisdb-2 passed
ustisdb-1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "ustisdb-2"
Interface Name IP Address Subnet
public 10.2.0.9 10.0.0.0
private 192.168.2.3 192.168.2.0
san 192.168.1.6 192.168.1.0
Interface information for node "ustisdb-1"
Interface Name IP Address Subnet
public 10.2.0.8 10.0.0.0
private 192.168.2.2 192.168.2.0
san 192.168.1.5 192.168.1.0
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
ustisdb-2:public ustisdb-1:public yes
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
ustisdb-2:private ustisdb-1:private yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
ustisdb-2:san ustisdb-1:san yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) ustisdb-2,ustisdb-1.
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
ustisdb-2 public:10.2.0.9
ustisdb-1 public:10.2.0.8
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
ustisdb-2 private:192.168.2.3
ustisdb-1 private:192.168.2.2
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
ustisdb-2 san:192.168.1.6
ustisdb-1 san:192.168.1.5
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
ustisdb-2 Windows Server 2003 Windows Server 2003 passed
ustisdb-1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
ustisdb-2 15.99GB (16771724KB) 512MB (524288KB) passed
ustisdb-1 15.99GB (16771724KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
ustisdb-2 17.4GB (18241648KB) 1GB (1048576KB) passed
ustisdb-1 17.4GB (18241648KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
ustisdb-2 64-bit 64-bit passed
ustisdb-1 64-bit 64-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.UST\LOCALS~1\Temp\1" dir
Node Name Available Required Comment
ustisdb-2 23.7GB (24848248KB) 400MB (409600KB) passed
ustisdb-1 23.65GB (24797157KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes. -
Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent
I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andysorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures -
Surely It cannot be this hard! DPM 2012 R2 with Update rollup 2
I am close to giving up!
New to DPM but very experienced with networking/servers.
I installed DPM 2012 R2 and then installed rollup 2
I launch the DPM console, add some storage and then go to install the agent on a server - it fails
I get the standard message. When I check on the server I tried to install to I can see that the dpm 2012 r2 agent coordinator service was installed and running and listening on port 5719 but there is no DPMRA service.
So I perform a manual installation using the correct version from Rollup 2 on the server to be protected. This goes OK and I return to the DPM server to add the protected server. Made sure services were running on both servers, checkerd RPC, WMI, DCOM settings
and all seems OK but when I try to add the protected server from the DPM console using the attach agent option it fails with error 370.
Followed the top 20 suggestions, configured firewall for all ports on both servers. Tried turning the firewall off and still will not install.
I have also tried using a Hyper-V server, a physical server and none will work which tends to point to an issue with the DPM server.
The thing that puzzles me is that after I perform a manual agent installation on the protected server this seems to knock out the dpm 2012 r2 agent coordinator service which is no longer listed under services wheras DPMRA is running. I expected both services
to be installed and running.
When I perform a NETSTAT -a after installing the remote agent I can see port 5718 is listening but not port 5719
If I go back a step and try a dpm 2012 r2 agent coordinator install via DPM console (as part of adding the protected server) it does install dpm 2012 r2 agent coordinator and it listens on port 5719 but the DPMRA agent software is not installed.
I have tried deinstalling both the DPM agent software on the protected server and have even reinstalled DPM 2012 R2 with Rollup 2 with no change
I have verified communications between the servers. Checked the DPM server is in the relevant groups. Am at a complete loss on what to do next - it should not be this hard.
Can someone confirm to me that they expect both the dpm 2012 r2 agent coordinator service running on 5719 and the DPMRA service to be running on 5718 on the protected server which is what I assume but this
is not happening!
DPM server is a physical box running Server 2012. Protected server is a Physical box running Server 2012 R2. I have also tried with a physical server 2008R2 with the same results. I am not running Server 2003
prdAfter 3 long days trying everything I could think of and following all of the excellent guidance out there ( thanks guys) I have a workaround.
The answer was to make the dpm server computer account a member of the domain admins group.
After I restarted the DPM server I saw that although the protected server account was still in error - the error message changed from 270 to 316.
So I then add the protected server computer account to the domain admins group
After I restarted the computers I could see the magic OK in the status of the DPM console.
As an experiment I removed the protected servers computer account from domain admins and restarted the server. After the restart DPM could no longer communicate with error 316 again.
So I tried adding the DPM server computer account to the protected servers local administrators group but this did not work.
Deeply unhappy with making a computer account a member of domain admin group but it works.
The question is why? There is obviously a security permissions issue that does not affect domain admins.
I am running this on freshly built servers on a simple, single domain.
Microsoft you need to look into this.
prd -
Trex can't be updated to higher levels on windows 2003 server 64 bit
Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PMHi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant -
Installing a Windows 2012 Domain Controller into a 2000/2003 domain with Exchange 2003
Hello,
I have a client that we are planning to migrate to 2012 over time. They currently have a Windows 200 DC and 2 member servers running Windows 2003, one of which is running Exchange 2003.
We first are going to introduce a 2012 server into the domain and my plan was to DCPromo the 2003 server that isn't running Exchange and raise domain level to 2003 and then demote the 2000 server. I was then going to install the
2012 server into the domain and make it a backup Domain Controller for the time being and leave the newly promoted Windows 2003 server as the primary Domain Controller with all the roles and global catalog. My question is will Exchange 2003 still function
normally in this scenario?
I've been doing research and read some things about Exchange 2003 not working with 2012 Domain Controllers, but I was thinking if the 2003 is still the primary, it might work. We will eventually migrate to 2003, they just don't want to
do it all at once, due to costs and other issues.
Thanks.I didn't ask if it was supported, I just wanted to know if Exchange 2003 would continue
to function if the Windows 2003 DC still held all the FSMO roles and Global Catalog.
A not supported situation means that it is a situation where Microsoft made no testing or do not guarantee that you can operate with no problems. Following a not supported scenario could be done but is on your own risk.
If it won't, can the 2012 server be a member server in the 2003 AD? The 2000
DC it is replacing, just shares files on the network in addition to being the lone AD server
Yes, it can be a member server.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile
Maybe you are looking for
-
Hi, I have put several hours into trying to solve these problems myself, but I am stuck. The page in question is: http://www.georgeglazer.com/maps/newyorkmaps/hydeli/hydeliinv.html 1. Detailregion area does not display when page opens. It's just a sk
-
Highest quality digital from .jpeg to printer ? Best workflow to .pdf ?
Hi, I use photoshop mostly to remove color info and resize for printing in manuals setup on InDesign. I wonder if there is a better route than what I usually do, which is : open in photoshop > remove color info > resize > save to .pdf. My question i
-
Import Process Slow .. Suggestions for Speedup ?
Hi, I am doing an import of data from a dump file since the last 15 hours. The size of the database is 15GB on a 10.2.0.3. The majority of the size is in one particular schema. The requirement is to duplicate the schema into a new tablespace. I creat
-
Pga_aggregate_target and hash_join cost (anomalies)
Hi, I've got some performance issues with queries using bind variables (BVP + histograms = evil). I did some test cases in test environment where the only difference with PROD was pga_aggregate_target . And was able to make plan changes w/o changing
-
List v = new Vector() how can i write this ?
List v = new Vector() how can i write this ? vector does not 'extends' List rather it 'implements' only ......so how can write this way ? ( polymorphism applies only for 'extends' ).